time limit per test1 second
memory limit per test256 megabytes
inputstandard input
outputstandard output
The tram in Berland goes along a straight line from the point 0 to the point s and back, passing 1 meter per t1 seconds in both directions. It means that the tram is always in the state of uniform rectilinear motion, instantly turning around at points x = 0 and x = s.
Igor is at the point x1. He should reach the point x2. Igor passes 1 meter per t2 seconds.
Your task is to determine the minimum time Igor needs to get from the point x1 to the point x2, if it is known where the tram is and in what direction it goes at the moment Igor comes to the point x1.
Igor can enter the tram unlimited number of times at any moment when his and the tram’s positions coincide. It is not obligatory that points in which Igor enter and exit the tram are integers. Assume that any boarding and unboarding happens instantly. Igor can move arbitrary along the line (but not faster than 1 meter per t2 seconds). He can also stand at some point for some time.
Input
The first line contains three integers s, x1 and x2 (2 ≤ s ≤ 1000, 0 ≤ x1, x2 ≤ s, x1 ≠ x2) — the maximum coordinate of the point to which the tram goes, the point Igor is at, and the point he should come to.
The second line contains two integers t1 and t2 (1 ≤ t1, t2 ≤ 1000) — the time in seconds in which the tram passes 1 meter and the time in seconds in which Igor passes 1 meter.
The third line contains two integers p and d (1 ≤ p ≤ s - 1, d is either 1 or ) — the position of the tram in the moment Igor came to the point x1 and the direction of the tram at this moment. If , the tram goes in the direction from the point s to the point 0. If d = 1, the tram goes in the direction from the point 0 to the point s.
Output
Print the minimum time in seconds which Igor needs to get from the point x1 to the point x2.
Examples
input
4 2 4
3 4
1 1
output
8
input
5 4 0
1 2
3 1
output
7
Note
In the first example it is profitable for Igor to go by foot and not to wait the tram. Thus, he has to pass 2 meters and it takes 8 seconds in total, because he passes 1 meter per 4 seconds.
In the second example Igor can, for example, go towards the point x2 and get to the point 1 in 6 seconds (because he has to pass 3 meters, but he passes 1 meters per 2 seconds). At that moment the tram will be at the point 1, so Igor can enter the tram and pass 1 meter in 1 second. Thus, Igor will reach the point x2 in 7 seconds in total.
【题目链接】:http://codeforces.com/contest/746
【题解】
按照要求、其实就是比较车先到X2还是人先到X2；
但是单纯这样做就太天真了，会在第3个点WA(路人甲:为什么你知道?)
要考虑那种车到了X2但是人还上不了车的情况。
是不是恍然大悟？？
对x2,x1,P的相对位置分类讨论一下就可以了。
（有一个地方忘记乘上时间、WA第19个点TAT);
【完整代码】
#include <bits/stdc++.h>
using namespace std;
#define lson l,m,rt<<1
#define rson m+1,r,rt<<1|1
#define LL long long
#define rep1(i,a,b) for (int i = a;i <= b;i++)
#define rep2(i,a,b) for (int i = a;i >= b;i--)
#define mp make_pair
#define pb push_back
#define fi first
#define se second
#define rei(x) scanf("%d",&x)
#define rel(x) scanf("%I64d",&x)
typedef pair<int,int> pii;
typedef pair<LL,LL> pll;
//const int MAXN = x;
const int dx[9] = {0,1,-1,0,0,-1,-1,1,1};
const int dy[9] = {0,0,0,-1,1,-1,1,-1,1};
const double pi = acos(-1.0);
int s,x1,x2,t1,t2,p,d;
int car = 0;
int main()
{
//freopen("F:\rush.txt","r",stdin);
rei(s);rei(x1);rei(x2);
rei(t1);rei(t2);
rei(p);rei(d);
if (p < x2)
{
if (d==1)
{
if (x1>x2)
car = (s-p+s-x2)*t1;
else
if (x1<x2)
{
if (x1>=p)
car = (x2-p)*t1;
else
if (x1<p)
car = (s-p+s+x2)*t1;
}
}
else
{
if (x1 <x2)
car = (p+x2)*t1;
else
if (x1 > x2)
car = (p+s+s-x2)*t1;
}
}
else
if (p>x2)
{
if (d==1)
{
if (x1<x2)
{
car = (s-p+s+x2)*t1;
}
else
if (x1>x2)
car = (s-p+s-x2)*t1;
}
else
{
if (x1<x2)
car = (p+x2)*t1;
else
if (x1>x2)
{
if (x1<=p)
car = (p-x2)*t1;
else
if (x1>p)
car = (p+s+s-x2)*t1;
}
}
}
int peo;
peo = abs(x2-x1)*t2;
cout << min(peo,car);
return 0;
}