zoukankan      html  css  js  c++  java
  • poj1637 Sightseeing tour

    Description

    The city executive board in Lund wants to construct a sightseeing tour by bus in Lund, so that tourists can see every corner of the beautiful city. They want to construct the tour so that every street in the city is visited exactly once. The bus should also start and end at the same junction. As in any city, the streets are either one-way or two-way, traffic rules that must be obeyed by the tour bus. Help the executive board and determine if it's possible to construct a sightseeing tour under these constraints.

    Input

    On the first line of the input is a single positive integer n, telling the number of test scenarios to follow. Each scenario begins with a line containing two positive integers m and s, 1 <= m <= 200,1 <= s <= 1000 being the number of junctions and streets, respectively. The following s lines contain the streets. Each street is described with three integers, xi, yi, and di, 1 <= xi,yi <= m, 0 <= di <= 1, where xi and yi are the junctions connected by a street. If di=1, then the street is a one-way street (going from xi to yi), otherwise it's a two-way street. You may assume that there exists a junction from where all other junctions can be reached.

    Output

    For each scenario, output one line containing the text "possible" or "impossible", whether or not it's possible to construct a sightseeing tour.

    Sample Input

    4
    5 8
    2 1 0
    1 3 0
    4 1 1
    1 5 0
    5 4 1
    3 4 0
    4 2 1
    2 2 0
    4 4
    1 2 1
    2 3 0
    3 4 0
    1 4 1
    3 3
    1 2 0
    2 3 0
    3 2 0
    3 4
    1 2 0
    2 3 1
    1 2 0
    3 2 0

    Sample Output

    possible
    impossible
    impossible
    possible

    Source

     
    首先给无向图随意定向,如果某个点初度和入度之差不是2的倍数,就一定没有欧拉回路。
    然后舍掉有向边 , 将无向边随意定向相连,容量上限为1 , 对于一个点的入度大于出度我们就把这个点与汇点相连,容量为差/2,
    而对于出度小于入度的,就将源点与之相连 ,容量为差/2,(注意容量都用为正)。
    然后跑一遍图判断是否满流,满流则有欧拉回路 。
     
      1 #include <iostream>
      2 #include <cstdlib>
      3 #include <cstring>
      4 #include <cstdio>
      5 #include <queue>
      6 const int inf = 1 << 30 , maxm = 20000+ 111 , maxn = 200 + 11 ;
      7 using namespace std ;
      8 queue< int > Q ;
      9 int n , m , s , t , dis[maxn] , cnt , cur[maxn] , head[maxn] , chu[maxn] , ru[maxn] , tot ;
     10 struct id
     11 {
     12     int nxt , to , val ;
     13 } edge[maxm] ;
     14 
     15 inline void Init( )
     16 {
     17     freopen( "poj1637.in" , "r" , stdin ) ;
     18     freopen( "poj1637.out" , "w" , stdout ) ;
     19 }
     20 
     21 int read( )
     22 {
     23     char ch = getchar( ) ; int k = 1 , ret = 0 ;
     24     while( ch < '0' || ch > '9' ) { if( ch == '-' ) k = -1 ; ch = getchar( ) ; }
     25     while( ch >= '0' && ch <= '9' ) { ret = ret * 10 + ch - '0' , ch = getchar( ) ; }
     26     return ret * k ;
     27 }
     28 
     29 void add( int u , int v , int val )
     30 {
     31     edge[++cnt] = id{ head[u] , v , val } ; head[u] = cnt ;
     32 }
     33 
     34 bool judge(  )
     35 {
     36     for( int x = 1 ; x <= n ; ++x )
     37     {
     38         if( (chu[x] - ru[x])&1 ) return false ;
     39     }
     40     return true ;
     41 }
     42 
     43 bool bfs(  )
     44 {
     45     memset( dis , -1 , sizeof(dis) ) ;
     46     dis[s] = 0 ; Q.push( s ) ;
     47     while( !Q.empty( ) )
     48     {
     49         int u = Q.front( ) ; Q.pop( ) ;
     50         for( int i = head[u] ; ~i ; i = edge[i].nxt )
     51         {
     52             int v = edge[i].to ;
     53             if( dis[v] < 0 && edge[i].val > 0 )
     54             {
     55                 dis[v] = dis[u] + 1 ;
     56                 Q.push( v ) ;
     57             }
     58         } 
     59     }
     60     return dis[t] != -1 ;
     61 }
     62 
     63 int dfs( int u , int f )
     64 {
     65     if( u == t ) return f ;
     66     int an , cost = 0 ;
     67     for( int i = cur[u] ; ~i ; i = edge[i].nxt )
     68     {
     69         int v = edge[i].to ;
     70         if( dis[v] != dis[u] + 1 ) continue ;
     71         an = dfs( v , min( f - cost , edge[i].val ) ) ;
     72         edge[i].val -= an , edge[i^1].val += an , cost += an;
     73         if( edge[i].val ) cur[u] = i ;
     74         if( cost == f ) return f ;
     75     }
     76     if( !cost ) dis[u] = -1 ;
     77     return cost ;
     78 }
     79 
     80 int dinic(  )
     81 {
     82     int ans = 0 ;
     83     while( bfs( ) )
     84     {
     85         for( int x = s ; x <= t ; ++x ) cur[x] = head[x] ;
     86         ans += dfs( s , inf ) ;
     87     }
     88     return ans ;
     89 }
     90 
     91 
     92 
     93 void input( )
     94 {
     95     n = read( ) ; m = read( ) ; cnt = -1 ; s = 0 , t = n + 1 ;
     96     int u , v , w ; tot = 0 ;
     97     while( m-- )
     98     {
     99         u = read( ) , v = read( ) , w = read( ) ;
    100         chu[u] ++ , ru[v] ++ ;
    101         if( !w ) 
    102         {
    103             add( u , v , 1 ) ;
    104             add( v , u , 0 ) ;
    105         }
    106     }
    107     for( int x = 1 ; x <= n ; ++x )
    108     {
    109         if( ru[x] > chu[x]  ) 
    110         {
    111             add( x , t , (ru[x] - chu[x]) >> 1 ) ;
    112             add( t , x , 0 ) ;
    113         } 
    114         if( ru[x] < chu[x] )
    115         {
    116             add( s , x , (chu[x]-ru[x])>>1 ) ;
    117             add( x , s , 0 ) ;
    118             tot += (chu[x]-ru[x])>>1 ;
    119         }
    120     }
    121     if( !judge( ) ) { puts("impossible") ; return ; }
    122     if( tot != dinic( ) ) puts("impossible") ;
    123     else puts("possible") ;
    124 }
    125 
    126 int main( )
    127 {
    128 //    Init( ) ;
    129     int t = read( ) ;
    130     while( t-- )
    131     {
    132         memset( head , -1 , sizeof(head) ) ;
    133         memset( chu , 0 , sizeof(chu) ) ;
    134         memset( ru , 0 , sizeof(ru) ) ;
    135         input( ) ;
    136     }
    137 //    fclose( stdin ) ;
    138 //    fclose( stdout ) ;
    139     return 0 ;
    140 }
  • 相关阅读:
    hbase 相关
    java 连接 hiveserver2 例子
    ik_max_word ik_smart 区别 和 单字 查询 不到问题
    如何计算地址线和数据线
    golang consistent hash 菜鸟分析
    借助GitHub托管你的项目代码
    PHP性能追踪及分析工具xhprof的安装与使用
    git使用方法
    go开发
    go的websocket实现
  • 原文地址:https://www.cnblogs.com/Ateisti/p/5949068.html
Copyright © 2011-2022 走看看