红帽触摸屏屏幕180旋转

红帽开机取消5秒等待 

sed -i "s/GRUB_TIMEOUT=.*$/GRUB_TIMEOUT=0/g" /etc/default/grub

grub2-mkconfig -o /boot/grub2/grub.cfg

 reboot

 

红帽屏幕180旋转

终端显示旋转180度 

 

sed -i "s/rhgb/fbcon=rotate:2/g" /etc/default/grub

grub2-mkconfig -o /boot/grub2/grub.cfg

reboot

 

图形化界面显示旋转180度 

要用到“fbdev”驱动，系统默认是已经安装

将/etc/X11/xorg.conf的“Driver”的驱动内容替换为“fbdev”

增加Option “Rotate” “UD”进行180翻转

cat >> /etc/X11/xorg.conf <<EOF

 

Section "InputClass"

        Identifier "libinput feitian catchall"

        Driver "libinput"

        Option "CalibrationMatrix" "-1 0 1 0 -1 1 0 0 1"

EndSection

 

Section "Device"

Identifier  "Card feitian"

Option    "Rotate""UD"

Driver      "fbdev"

EndSection

 

EOF

 

触摸旋转鼠标旋转:
步骤1.yum install xorg-x11-drv-libinput.x86_64
步骤2. cp /usr/share/X11/xorg.conf.d/40-libinput.conf /etc/X11/xorg.conf.d/

步骤3. 编辑/etc/X11/xorg.conf.d/40-libinput.conf
找到 touchscreen 的部分。在里面添加以下语句，然后保存即可
Option "CalibrationMatrix" "-1 0 1 0 -1 1 0 0 1"
步骤4. 最后reboot
================================================
# Match on all types of devices but tablet devices and joysticks
Section "InputClass"
Identifier "libinput pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "libinput"
EndSection

Section "InputClass"
Identifier "libinput keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "libinput"
EndSection

Section "InputClass"
Identifier "libinput touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "libinput"
EndSection

Section "InputClass"
Identifier "libinput touchscreen catchall"
MatchIsTouchscreen "on"
Option "CalibrationMatrix" "-1 0 1 0 -1 1 0 0 1"
MatchDevicePath "/dev/input/event*"
Driver "libinput"
EndSection

================================================