5.2.11.添加读写接口

1. ./app

如果app只使用了write(fd, "hellowrite", 10);没有read的话，./app没有反应

error：如果该写了驱动，则应该重新安装驱动

#lsmod
Module                  Size  Used by    Not tainted
module_test             1087  0

# cat /proc/devices

# lsmod

# insmod module_test.ko

#mknod /dev/test c 250 0
#ls /dev/test -l

#./app

[ 143.016905] test_chrdev_open
open /dev/test su[ 143.175274] test_chrdev_write
[ 143.179043] test_chrdev_release
ccess.
j--->
[ 143.016905] test_chrdev_open ----------------->test_chrdev_open --------->test_chrdev_open 1. fd = open(FILE, O_RDWR);
open /dev/test success. -------------------->main 2.printf("open %s success. ", FILE);
[ 143.175274] test_chrdev_write ----------------->test_chrdev_write --------->test_chrdev_write 3.write(fd, "hellowrite", 10);
[ 143.179043] test_chrdev_release ----------------->test_chrdev_release --------->test_chrdev_release 4.close(fd);

 #./app

[ 566.922098] test_chrdev_open ----------------->test_chrdev_open --------->test_chrdev_open 1. fd = open(FILE, O_RDWR);
[ 566.923665] test_chrdev_write ----------------->test_chrdev_write --------->test_chrdev_write 3.write(fd, "hellowrite", 10);
[ 566.926485] test_chrdev_read ----------------->test_chrdev_read --------->test_chrdev_read 4.read(fd, buffer, 10);
[ 566.929342] test_chrdev_release ----------------->test_chrdev_release --------->test_chrdev_release 5.close(fd);
open /dev/test success. -------------------->main 2.printf("open %s success. ", FILE);

2. 写函数的本质是将应用层传递过来的数据先复制到内核中，然后以正确的方式写入硬件
   应用和驱动之间的数据交换：
   copy_from_user：将数据从用户空间复制到内核空间
   copy_to_user：
   注意：复制是和mmap的映射相对应区分的