游标实例

今天写了一个游标，但是不知道怎么在这游标里定义一个变量来记录执行时影响条数，并插入两条数据时就跳出循环结束游标。

没有想出辙，实属头疼。附代码如下：

--游标
declare @userID uniqueidentifier--userid
declare y_curr cursor for
select top 2 userID from Hope_Users_db.dbo.u_Users order by addTime desc

open y_curr --打开游标
fetch next from y_curr into @userID ----开始循环游标变量
while(@@fetch_status=0)---返回被FETCH  语句执行的最后游标的状态，而不是任何当前被连接打开的游标的状态。
begin
	   if exists (select * from Q_enterprise where userID = @userID)
		  begin
		     print @userID
		  end
		else
		  begin
			   print @userID
			   insert into Q_enterprise
			   select distinct u.userID, u.userType,u.SyncCharityId as CharityId,u.userTrueName,u.userLogo,0 as donationAmount,e.enterpriseContactMobile,
			   e.enterprisePurpose,0 as enterpriseLongitude,0 as enterpriseLatitude,'' as Infoproportion,0 as sharesum,0 as praisesum,
			   0 as Donationsum,0 as Farvritessum,0 as Donationsum30,u.addTime,'' as updatetime
			   from Hope_Users_db.dbo.u_Users u
			   inner join Hope_Donation_DB.dbo.d_Donation d
			   on u.userID=d.userID
			   inner join Hope_Users_db.dbo.u_Enterprise e
			   on u.userID = e.userID
			   where u.userID=@userID
		  end
      fetch next from y_curr into @userID --开始循环游标变量
end
close y_curr--关闭游标
deallocate y_curr --释放游标
go

游标实例二：循环读取数据表并进行各种计算并添加数据到临时表，结果输出临时表

USE [CenterDB]
GO

/****** Object:  StoredProcedure [dbo].[Pro_GetSalary]    Script Date: 2017/5/23 9:26:30 ******/
SET ANSI_NULLS ON
GO

SET QUOTED_IDENTIFIER ON
GO


--读取工单详细,并计算每个工单机长的提成
ALTER PROCEDURE [dbo].[Pro_GetSalary]
   (@sTime nvarchar(255),--查询工单EndTime的开始时间节点
    @eTime nvarchar(255),--查询工单EndTime的结束时间节点
    @pageIndex int,--开始页码
    @pageSize int, --结束页码
    @recordCount int output --总记录数
    )
AS
BEGIN
    declare
    @FinishEName nvarchar(40),--操作人名称
    @DevName varchar(100),--设备名称
    @PrtTotalPageCount int,--单手印数
    @PrtSumCount2 int,--总印数
    @EndTime DateTime,--结束时间
    @ProductName varchar(1202),--印件名称
    @knifeCount float,--刀数
    @KnifeMoney float,--切刀的提成
    @setCount float, --套数
    @setMoney float,--印数的提成
    @kaiDu nvarchar(255), --开度
    @baiNumber int, --百位数字
    @PrtPCount int, --正数（名片张数）
    @DevGroupName nvarchar(255),--机组
    @boxNumber int,--名片盒数
    @ShouShu varchar(50),--手数
    @MPStyle varchar(50),--拼版方式
    @strSql nvarchar(max), --拼接sql
    @startNumber int,--开始页码
    @endNumber int --结束页码
    
    --BEGIN TRAN --声明工单事务
    set @strSql = 'declare pNumber_cursor CURSOR FOR '
    set @strSql = @strSql + ' select A.FinishEName,A.DevName,A.PrtTotalPageCount,A.PrtSumCount2,A.EndTime,A.ProductName,A.PrtPCount,A.ShouShu,A.MPStyle,B.DevGroupName,B.KaiDu';
    set @strSql = @strSql +' from QuePlanArrage as A  inner join DevGroup B on A.DevName = B.DevName where 1=1';
    if @sTime != '' and @eTime != ''
       begin
         set @strSql = @strSql +' and A.EndTime between cast('''+@sTime+' 00:00:00.000'' as datetime) and cast('''+@eTime+' 23:59:59.999'' as datetime)';
       end
    if @sTime != '' and @eTime = ''
       begin
         set @strSql = @strSql +' and A.EndTime >= cast('''+@sTime+' 00:00:00.000'' as datetime)';
       end
    if @sTime = '' and @eTime != ''
       begin
         set @strSql = @strSql +' and A.EndTime <= cast('''+@eTime+' 23:59:59.999'' as datetime)';
       end
    set @strSql = @strSql + ' and  A.State=13 and (A.JobID=''9'' or A.JobID=''10'') Order by A.DevName,A.ID' ;
    
    EXEC sp_executesql @strSql

    --新建临时表
    if object_id(N'##SalaryInfo',N'U') is not null
     begin
      drop table ##SalaryInfo
     end
    create table ##SalaryInfo
              (
                ID int identity(1,1),
                FinishEName nvarchar(40),
                DevName varchar(100) null,
                PrtTotalPageCount int,
                PrtSumCount2 int,
                EndTime DateTime,
                ProductName varchar(1202),
                SetNumber int,
                KnifeMoney Decimal(12,1),
                setMoney Decimal(12,1),
                Salary Decimal(12,1)
              )
    
    --打开游标
    open pNumber_cursor
     WHILE @@FETCH_STATUS = 0 --返回被FETCH语句执行的最后游标的状态，而不是任何当前被连接打开的游标的状态。
      begin
       --开始循环游标变量
       FETCH NEXT FROM pNumber_cursor INTO @FinishEName,@DevName,@PrtTotalPageCount,@PrtSumCount2,@EndTime,@ProductName,@PrtPCount,@ShouShu,@MPStyle,@DevGroupName,@KaiDu
       if @DevName!=null or @DevName != ''--说明当前行有数据
        begin
       --执行sql操作
            --计算总印数结束
            --根据总印数计算套数开始
            set @baiNumber = @PrtSumCount2/100%10;
            if @baiNumber <2
                begin
                 set @PrtSumCount2 = cast((cast(@PrtSumCount2/1000 as varchar)+'000') as int);
                end
                
                if @PrtSumCount2 <3300
                begin
                 set @setCount = 1;
                end
                else
                begin
                 set @setCount = round(cast(@PrtSumCount2 as float)/cast(3000 as float),1);     
                end
            --根据总印数计算套数结束
            
            --根据套数计算提成开始
            if @DevGroupName = 'AAAAA'
               begin
                 set @setMoney = @setCount * 17;
               end
            if @DevGroupName = 'BBBBB'
               begin
                 if CHARINDEX('名片',@ProductName)>0
                     begin
                      set @setMoney = @setCount *16;
                     end
                 else
                     begin
                      set @setMoney = @setCount *23;
                     end
               end
            if @DevGroupName ='CCCCC' 
               begin
                set @setMoney = @setCount*13;
               end
            if @DevGroupName ='DDDDD' 
               begin
                set @setMoney = @setCount*17;
               end
            if @DevGroupName ='EEEEE'
               begin
                set @setMoney = @setCount*19.5;
               end
            --根据套数计算提成结束
            
            if charindex('不干胶',@ProductName)>0 --类别为不干胶
            Begin
               declare @exKnife int --基数--转换刀数
               if @kaiDu = '八开'
               begin
                  set @exKnife =  1;
               end
               else if @kaiDu = '四开'
               begin
                  set @exKnife = 2;
               end
               else
               begin
                  set @exKnife = 3;
               end
               if @PrtSumCount2%500 > 50
                  begin
                   set @knifeCount =(@PrtSumCount2/500+1)*@exKnife;
                  end
               else
                  begin
               set @knifeCount = (@PrtSumCount2/500)*@exknife;
                  end
               set @KnifeMoney = @knifeCount*1.9;
            End
            Else if CHARINDEX('名片',@productName)>0 --类别为名片
            Begin
               set @boxNumber = @PrtPCount/100;
               if @boxNumber <2.5
                  begin
                    set @knifeCount = 1;
                  end
               else
                  begin
                    set @knifeCount = @boxNumber/2.5;
                  end
               set @KnifeMoney = @knifeCount*4.2;
            End
            Else  --类别为彩页
            Begin
                declare @baseNumber int, @exchangeKnife int --基数--转换刀数
                if @kaiDu='全开'
                    begin
                       set @baseNumber = 1000;
                       set @exchangeKnife = 3;
                    end
               if @kaiDu ='对开'
                   begin
                       set @baseNumber=1000;
                       set @exchangeKnife = 1;
                   end
               if @kaiDu ='四开'
                   begin
                       set @baseNumber = 2000;
                       set @exchangeKnife = 1;
                   end
               if @kaiDu ='八开'
                   begin
                       set @baseNumber = 2500;
                       set @exchangeKnife = 1;
                   end
               if @kaiDu ='十六开'
                   begin
                      set @baseNumber = 5000;
                      set @exchangeKnife = 1;
                   end
               if @kaiDu ='三十二开及其以上'
                   begin
                      set @baseNumber = 10000;
                      set @exchangeKnife = 1;
                   end
               --彩页：开始计算刀数
               if @PrtSumCount2 < @baseNumber
                  begin
                   set @knifeCount=1*@exchangeKnife
                  end
               else if @PrtSumCount2%@baseNumber>100
                  begin
                    set @knifeCount=(@PrtSumCount2/@baseNumber+1)*@exchangeKnife
                  end
               else
                  begin
                    set @knifeCount = (@PrtSumCount2/@baseNumber)*@exchangeKnife
                  end
               set @KnifeMoney = @knifeCount*2;
            End
       --刀数和套数均已有结果
       
       --判断是否已有临时表，无则新建添加有则添加  
         insert into ##SalaryInfo
         (FinishEName,DevName,PrtTotalPageCount,PrtSumCount2,EndTime,ProductName,SetNumber,KnifeMoney,setMoney,Salary) 
         values(@FinishEName,@DevName,@PrtTotalPageCount,@PrtSumCount2,@EndTime,@ProductName,@setCount,@KnifeMoney,@setMoney,(@KnifeMoney+@setMoney))
       end
      end
    
    --分页代码
    if @pageIndex = 1
     begin
      set @startNumber = 1;
     end
    else
     begin
      set @startNumber = (@PageIndex-1)*@pageSize + 1;
     end 
    set @endNumber = @pageIndex*@pageSize;
    
    --计算总记录数
     DECLARE @strCountSql NVARCHAR(1000)
     SET @strCountSql = 'Select @reCount = count(1) FROM (select FinishEName,DevName from ##SalaryInfo group by FinishEName,DevName) A'
     EXEC sp_executesql @strCountSql, N'@reCount int OUTPUT', @recordCount OUTPUT
    
    --select FinishEName,DevName,SUM(SetNumber) as SetNumberSum,SUM(PrtTotalPageCount) as PrtTotalPageCountSum,SUM(PrtSumCount2) as PrtSumCount2Sum,SUM(KnifeMoney) as KnifeMoneySum,SUM(setMoney) as setMoneySum,SUM(Salary) as SalarySum
    --from ##SalaryInfo 
    --group by FinishEName,DevName
    
    select * from (select ROW_NUMBER()
    over(order by DevName) as rownum,FinishEName,DevName,SUM(SetNumber) as SetNumberSum,SUM(PrtTotalPageCount) as PrtTotalPageCountSum,SUM(PrtSumCount2) as PrtSumCount2Sum,SUM(KnifeMoney) as KnifeMoneySum,SUM(setMoney) as setMoneySum,SUM(Salary) as SalarySum from ##SalaryInfo where 1=1  group by FinishEName,DevName) AS D
    where rownum between @startNumber and @endNumber
    
    CLOSE pNumber_cursor--关闭游标
    DEALLOCATE pNumber_cursor--释放游标
    
    --删除临时表
    drop table ##SalaryInfo
     
END

GO