摘自资料：VMware网卡选项分析.zip
很多朋友都曾问到关于Guest和Host互联，其实这并不是一件困难的事情，只要能够理解VMware的网络模型即可，今天结合着我的虚拟机，来详细介绍一下VMware的3种网络结构
在说到VMware的网络模型之前，先说一下VMware的几个虚拟设备：
■ VMnet0：这是VMware用于虚拟桥接网络下的虚拟交换机；
■ VMnet1：这是VMware用于虚拟Host-Only网络下的虚拟交换机；
■ VMnet8：这是VMware用于虚拟NAT网络下的虚拟交换机；
■ VMware Network Adapter VMnet1：这是Host用于与Host-Only虚拟网络进行通信的虚拟网卡；
■ VMware Network Adapter VMnet8：这是Host用于与NAT虚拟网络进行通信的虚拟网卡；
0 概述
一、桥接网络
拓扑图
Host的物理网卡和Guest的网卡在VMnet0交换机上通过虚拟网桥进行桥接，这也就是说，你的物理网卡和你的Guest的虚拟网卡（注：这个虚拟网卡不等于VMware Network Adapter VMnet1或者VMware Network Adapter VMnet8）处于同等地位，此时的Guest就好像你的Host主机所在的一个网段所在的另外一台机器。
看一下VMware中对于Bridged网络的定义：
Bridged networking connects a virtual machine to a network using the host computer's Ethernet adapter.
Bridged networking is set up automatically if you select Use bridged networking in the New Virtual Machine Wizard or if you select the Typical setup path. This selection is available on a Linux host only if you enable the bridged networking option when you install GSX Server.
If your host computer is on an Ethernet network, bridged networking is often the easiest way to give your virtual machine access to that network. On a Windows host, you can use bridged networking to connect to either a wired or a wireless network. On a Linux host, you can use bridged networking to connect to a wired network.
If you use bridged networking, your virtual machine needs to have its own identity on the network. For example, on a TCP/IP network, the virtual machine needs its own IP address. Your network administrator can tell you whether IP addresses are available for your virtual machine and what networking settings you should use in the guest operating system. Generally, your guest operating system may acquire an IP address and other network details automatically from a DHCP server, or you may need to set the IP address and other details manually in the guest operating system.
If you use bridged networking, the virtual machine is a full participant in the network. It has access to other machines on the network and can be contacted by other machines on the network as if it were a physical computer on the network.
Be aware that if the host computer is set up to boot multiple operating systems and you run one or more of them in virtual machines, you need to configure each operating system with a unique network address. People who boot multiple operating systems often assign all systems the same address, since they assume only one operating system will run at a time. If you use one or more of the operating systems in a virtual machine, this assumption is no longer true.
If you make some other selection in the New Virtual Machine Wizard and later decide you want to use bridged networking, you can make that change in the virtual machine settings editor (VM > Settings). For details, see Changing the Networking Configuration.
二、NAT网络
拓扑图
、
在NAT网络中，会使用到VMnet8虚拟交换机，Host上的VMware Network Adapter VMnet8虚拟网卡被连接到VMnet8交换机上，来与Guest进行通信，但是VMware Network Adapter VMnet8虚拟网卡仅仅是用于和VMnet8网段通信用的，它并不为VMnet8网段提供路由功能，处于虚拟NAT网络下的Guest是使用虚拟的NAT服务器连接的Internet的。
参看VMware中关于NAT网络的描述：
NAT gives a virtual machine access to network resources using the host computer's IP address.
A network address translation connection is set up automatically if you follow the Custom path in the New Virtual Machine Wizard and select Use network address translation.
If you want to connect to the Internet or other TCP/IP network using the host computer's dial-up networking or broadband connection and you are not able to give your virtual machine an IP address on the external network, NAT is often the easiest way to give your virtual machine access to that network.
NAT also allows you to connect to a TCP/IP network using a Token Ring adapter on the host computer.
If you use NAT, your virtual machine does not have its own IP address on the external network. Instead, a separate private network is set up on the host computer. Your virtual machine gets an address on that network from the VMware virtual DHCP server. The VMware NAT device passes network data between one or more virtual machines and the external network. It identifies incoming data packets intended for each virtual machine and sends them to the correct destination.
If you select NAT, the virtual machine can use many standard TCP/IP protocols to connect to other machines on the external network. For example, you can use HTTP to browse Web sites, FTP to transfer files and Telnet to log on to other computers. In the default configuration, computers on the external network cannot initiate connections to the virtual machine. That means, for example, that the default configuration does not let you use the virtual machine as a Web server to send Web pages to computers on the external network.
If you make some other selection in the New Virtual Machine Wizard and later decide you want to use NAT, you can make that change in the virtual machine settings editor (VM > Settings). For details, see Changing the Networking Configuration.
For a more thorough discussion of NAT, see Understanding NAT
三、Host-Only网络
拓扑图
在Host-Only网络中，Host-Only网络被用来设计成一个与外界隔绝的网络，其实Host-Only网络和NAT网络非常相似，唯一不同的地方就是在Host-Only网络中，没有用到NAT服务，没有服务器为VMnet1做路由，它当然就没有办法访问Internet啦，可是如果我的Host要和Guest通信呢？怎么办？对了！当然就要用到VMware Network Adapter VMnet1这块虚拟网卡了。
可以看看VMware中关于Host-Only网络的描述：
Host-only networking creates a network that is completely contained within the host computer.
A host-only network is set up automatically if you select Use Host-Only Networking in the New Virtual Machine Wizard. On Linux hosts, this selection is available only if you enabled the host-only networking option when you installed GSX Server.
Host-only networking provides a network connection between the virtual machine and the host computer, using a virtual Ethernet adapter that is visible to the host operating system. This approach can be useful if you need to set up an isolated virtual network.
If you use host-only networking, your virtual machine and the host virtual adapter are connected to a private TCP/IP network. Addresses on this network are provided by the VMware DHCP server.
If you make some other selection in the New Virtual Machine Wizard and later decide you want to use host-only networking, you can make that change in the virtual machine settings editor (VM > Settings). For details, see Changing the Networking Configuration.
Routing and Connection Sharing
If you install the proper routing or proxy software on your host computer, you can establish a connection between the host virtual Ethernet adapter and a physical network adapter on the host computer. This allows you, for example, to connect the virtual machine to a Token Ring or other non-Ethernet network.
On a Windows 2000 or Windows Server 2003 host computer, you can use host-only networking in combination with the Internet connection sharing feature in Windows to allow a virtual machine to use the host's dial-up networking adapter or other connection to the Internet. See your Windows documentation for details on configuring Internet connection sharing.