chapter06
1．为主机增加80G SCSI 接口硬盘
2．划分三个各20G的主分区
[root@localhost ~]# fdisk -l /dev/sde
磁盘 /dev/sde：85.9 GB, 85899345920 字节，167772160 个扇区
Units = 扇区 of 1 * 512 = 512 bytes
扇区大小(逻辑/物理)：512 字节 / 512 字节
I/O 大小(最小/最佳)：512 字节 / 512 字节
磁盘标签类型：dos
磁盘标识符：0xeb49d65d
设备 Boot Start End Blocks Id System
/dev/sde1 2048 41945087 20971520 83 Linux
/dev/sde2 41945088 83888127 20971520 83 Linux
/dev/sde3 83888128 125831167 20971520 83 Linux
3．将三个主分区转换为物理卷（pvcreate），扫描系统中的物理卷
[root@localhost ~]# pvcreate /dev/sdb1
Physical volume "/dev/sde1" successfully created
[root@localhost ~]# pvcreate /dev/sdb2
Physical volume "/dev/sde2" successfully created
[root@localhost ~]# pvcreate /dev/sdb3
Physical volume "/dev/sde3" successfully created
[root@localhost ~]# pvscan
PV /dev/sda2 VG centos lvm2 [39.51 GiB / 44.00 MiB free]
PV /dev/sdb1 lvm2 [20.00 GiB]
PV /dev/sdb2 lvm2 [20.00 GiB]
PV /dev/sdb3 lvm2 [20.00 GiB]
Total: 4 [99.51 GiB] / in use: 1 [39.51 GiB] / in no VG: 3 [60.00 GiB]
4．使用两个物理卷创建卷组，名字为myvg，查看卷组大小
[root@localhost ~]# vgcreate myvg /dev/sdb[12]
Volume group "myvg" successfully created
[root@localhost ~]# vgdisplay myvg
--- Volume group ---
VG Name myvg
System ID
Format lvm2
Metadata Areas 2
Metadata Sequence No 1
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 0
Open LV 0
Max PV 0
Cur PV 2
Act PV 2
VG Size 39.99 GiB
PE Size 4.00 MiB
Total PE 10238
Alloc PE / Size 0 / 0
Free PE / Size 10238 / 39.99 GiB
VG UUID o0hTSa-LaKS-w0r7-H2I7-p14g-JO3D-Sh7j0H
5．创建逻辑卷mylv，大小为30G
[root@localhost ~]# lvcreate -L 30G -n mylv myvg
Logical volume "mylv" created.
6．将逻辑卷格式化成xfs文件系统，并挂载到/data目录上，创建文件测试
[root@localhost ~]# mkdir /data
[root@localhost ~]# mkfs -t xfs /dev/myvg/mylv
meta-data=/dev/myvg/mylv isize=256 agcount=4, agsize=1966080 blks
= sectsz=512 attr=2, projid32bit=1
= crc=0 finobt=0
data = bsize=4096 blocks=7864320, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=0
log =internal log bsize=4096 blocks=3840, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
[root@localhost ~]# echo "1234567" >/data/text.txt
[root@localhost ~]# cat /data/text.txt
1234567
[root@localhost ~]# mount /dev/myvg/mylv /data
[root@localhost ~]# df -Th
文件系统 类型 容量 已用 可用 已用% 挂载点
/dev/mapper/centos-root xfs 38G 4.0G 34G 11% /
devtmpfs devtmpfs 985M 0 985M 0% /dev
tmpfs tmpfs 994M 84K 994M 1% /dev/shm
tmpfs tmpfs 994M 8.9M 985M 1% /run
tmpfs tmpfs 994M 0 994M 0% /sys/fs/cgroup
/dev/sda1 xfs 497M 107M 391M 22% /boot
/dev/sr0 iso9660 4.1G 4.1G 0 100% /run/media/root/CentOS 7 x86_64
/dev/mapper/myvg-mylv xfs 30G 33M 30G 1% /data
7．增大逻辑卷到35G
[root@localhost ~]# lvextend -L +5G /dev/myvg/mylv
Size of logical volume myvg/mylv changed from 30.00 GiB (7680 extents) to 35.00 GiB (8960 extents).
Logical volume mylv successfully resized
[root@localhost ~]# xfs_growfs /dev/myvg/mylv
meta-data=/dev/mapper/myvg-mylv isize=256 agcount=4, agsize=1966080 blks
= sectsz=512 attr=2, projid32bit=1
= crc=0 finobt=0
data = bsize=4096 blocks=7864320, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=0
log =internal bsize=4096 blocks=3840, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
data blocks changed from 7864320 to 9175040
[root@localhost ~]# lvdisplay /dev/myvg/mylv
--- Logical volume ---
LV Path /dev/myvg/mylv
LV Name mylv
VG Name myvg
LV UUID W3cZJj-qEjB-F3Fa-depC-sMSQ-tVhk-1dP1u1
LV Write Access read/write
LV Creation host, time localhost.localdomain, 2019-08-02 12:24:59 +0800
LV Status available
# open 1
LV Size 35.00 GiB
Current LE 8960
Segments 2
Allocation inherit
Read ahead sectors auto
- currently set to 8192
Block device 253:2
[root@localhost ~]# df -Th
文件系统 类型 容量 已用 可用 已用% 挂载点
/dev/mapper/centos-root xfs 38G 4.7G 33G 13% /
devtmpfs devtmpfs 985M 0 985M 0% /dev
tmpfs tmpfs 994M 84K 994M 1% /dev/shm
tmpfs tmpfs 994M 9.0M 985M 1% /run
tmpfs tmpfs 994M 0 994M 0% /sys/fs/cgroup
/dev/sda1 xfs 497M 107M 391M 22% /boot
/dev/sr0 iso9660 4.1G 4.1G 0 100% /run/media/root/CentOS 7 x86_64
/dev/mapper/myvg-mylv xfs 35G 33M 35G 1% /data
8．编辑/etc/fstab文件挂载逻辑卷，并支持磁盘配额选项
[root@localhost ~]#
/dev/myvg1/mylv /data xfs defaults,usrquota,grpquota 00
[root@localhost ~]# mount /data
mount: /dev/mapper/myvg1-mylv 已经挂载或 /data 忙
/dev/mapper/myvg1-mylv 已经挂载到 /data 上
[root@localhost ~]# df -h
文件系统 容量 已用 可用 已用% 挂载点
/dev/mapper/centos-root 38G 5.4G 33G 15% /
devtmpfs 985M 0 985M 0% /dev
tmpfs 994M 84K 994M 1% /dev/shm
tmpfs 994M 9.0M 985M 1% /run
tmpfs 994M 0 994M 0% /sys/fs/cgroup
/dev/sdb2 5.0G 33M 5.0G 1% /data2
/dev/mapper/myvg-mylv 34G 33M 34G 1% /lvm
/dev/sdb1 4.8G 20M 4.6G 1% /data1
/dev/sda1 497M 107M 391M 22% /boot
/dev/sr0 4.1G 4.1G 0 100% /run/media/root/CentOS 7 x86_64
/dev/mapper/myvg1-mylv 35G 33M 35G 1% /data
9．创建磁盘配额，crushlinux用户在/data目录下文件大小软限制为80M，硬限制为100M，
crushlinux用户在/data目录下文件数量软限制为80个，硬限制为100个。
[root@localhost ~]# useradd crushlinux
▽oot@localhost ~]# mkdir /data1
[root@localhost ~]# mkfs.ext4 /dev/sdb3
mke2fs 1.42.9 (28-Dec-2013)
文件系统标签=
OS type: Linux
块大小=4096 (log=2)
分块大小=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
1310720 inodes, 5242880 blocks
262144 blocks (5.00%) reserved for the super user
第一个数据块=0
Maximum filesystem blocks=2153775104
160 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
Allocating group tables: 完成
正在写入inode表: 完成
Creating journal (32768 blocks): 完成
Writing superblocks and filesystem accounting information: 完成
[root@localhost ~]# mount /dev/sdb3 /data1
[root@localhost ~]# mount -o remount,usrquota,grpquota /data1
[root@localhost ~]# vim /etc/fstab
/dev/sdb3 /data1 ext4 defaults,usrquota,grpquota 0 0
[root@localhost ~]# quotacheck -avug
quotacheck: Your kernel probably supports journaled quota but you are not using it. Consider switching to journaled quota to avoid running quotacheck after an unclean shutdown.
quotacheck: Scanning /dev/sdb3 [/data1] done
quotacheck: Cannot stat old user quota file /data1/aquota.user: 没有那个文件或目录. Usage will not be subtracted.
quotacheck: Cannot stat old group quota file /data1/aquota.group: 没有那个文件或目录. Usage will not be subtracted.
quotacheck: Cannot stat old user quota file /data1/aquota.user: 没有那个文件或目录. Usage will not be subtracted.
quotacheck: Cannot stat old group quota file /data1/aquota.group: 没有那个文件或目录. Usage will not be subtracted.
quotacheck: Checked 2 directories and 0 files
quotacheck: Old file not found.
quotacheck: Old file not found.
[root@localhost ~]# quotaon -auvg
/dev/sdb3 [/data1]: group quotas turned on
/dev/sdb3 [/data1]: user quotas turned on
[root@localhost ~]# edquota -u crushlinux
Disk quotas for user crushlinux (uid 1001):
Filesystem blocks soft hard inodes soft hard
/dev/sdb3 0 8000 10000 0 80 100
10．使用touch dd 命令在/data目录下测试
[root@localhost ~]# chmod -R 777 /data1
chmod: 更改"/data1/aquota.user" 的权限: 不允许的操作
chmod: 更改"/data1/aquota.group" 的权限: 不允许的操作
[root@localhost ~]# ll /data1
总用量 32
-rw------- 1 root root 6144 8月 3 15:12 aquota.group
-rw------- 1 root root 7168 8月 3 15:12 aquota.user
drwxrwxrwx 2 root root 16384 8月 3 15:10 lost+found
[root@localhost ~]# su crushlinux
[crushlinux@localhost root]$ dd if=/dev/zero of=/data1/ceshi bs=1M count=90
sdb3: warning, user block quota exceeded.
sdb3: write failed, user block limit reached.
dd: 写入"/data1/ceshi" 出错: 超出磁盘限额
记录了10+0 的读入
记录了9+0 的写出
10240000字节(10 MB)已复制，0.00650797 秒，1.6 GB/秒
[crushlinux@localhost root]$ touch /data1/{1..90}
sdb3: warning, user file quota exceeded.
11．查看配额的使用情况：用户角度
[root@localhost ~]# quota -uvs crushlinux
Disk quotas for user crushlinux (uid 1001):
Filesystem space quota limit grace files quota limit grace
/dev/sdb3 10000K* 8000K 10000K 6days 91* 80 100 6days
12．查看配额的使用情况：文件系统角度
[root@localhost ~]# repquota -auvs
*** Report for user quotas on device /dev/sdb3
Block grace time: 7days; Inode grace time: 7days
Space limits File limits
User used soft hard grace used soft hard grace
----------------------------------------------------------------------
root -- 20K 0K 0K 2 0 0
crushlinux ++ 10000K 8000K 10000K 6days 91 80 100 6days
Statistics:
Total blocks: 7
Data blocks: 1
Entries: 2
Used average: 2.000000