zoukankan      html  css  js  c++  java
  • Linux vsftpd服务配置具体解释

    【背景】

              近日。一朋友dominoserver要进行升级、迁移,搭建了linux測试系统,也开启vsftpd服务,但是配置的ftp账号,程序无法正常下载附件。

    【问题跟踪】

              通过ftpclient连接工具登录。发现未跳转到ftp账号指定的文件夹以下。

              cat /etc/vsftpd.config发现开启了:
              local_root=/home/test

              将此凝视重新启动ftp服务正常。


    附录(vsftpd配置具体解释):

    vsftpdserver配置文件“/etc/vsftpd/vsftpd.conf”。以此为例。 
    ###——每一句中文解释的对象为紧接着以下的语句。 
    # Example config file /etc/vsftpd/vsftpd.conf
    #
    # The default compiled in settings are fairly paranoid. This sample file
    # loosens things up a bit, to make the ftp daemon more usable.
    # Please see vsftpd.conf.5 for all compiled in defaults.
    #
    # READ THIS: This example file is NOT an exhaustive list of vsftpd options.
    # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
    # capabilities.
    #
    # Allow anonymous FTP? (Beware - allowed by default if you comment this out).
    #  ####——是否同意匿名用户登录此FTPserver。默认下是“YES”同意登录。
    anonymous_enable=YES

    #
    # Uncomment this to allow local users to log in.
    #  ####——是否同意本地用户登录此FTPserver。默认下是“YES”同意登录。
    local_enable=YES
    #
    #
    # Uncomment this to enable any form of FTP write command.
    #  ####——是否同意本地登录用户具有“写入”的权限。默认下是“YES”同意。


    write_enable=YES

    #
    #
    # Default umask for local users is 077. You may wish to change this to 022,
    # if your users expect that (022 is used by most other ftpd's)
    #  ####——设置本地用户的文件生成掩码为022。默觉得077
    local_umask=022
    #
    #
    # Uncomment this to allow the anonymous FTP user to upload files. This only
    # has an effect if the above global write enable is activated. Also, you will
    # obviously need to create a directory writable by the FTP user.
    #  ####——是否同意匿名登录用户具有“上传”的权限。默认下是“YES”同意。当须要启用时须要将此句前面的“#”去掉就可以。
    #anon_upload_enable=YES
    #
    #
    # Uncomment this if you want the anonymous FTP user to be able to create
    # new directories.
    #  ####——是否同意匿名登录用户具有“创建文件夹”的权限。

    默认下是“YES”同意。当须要启用时须要将此句前面的“#”去掉就可以。


    #anon_mkdir_write_enable=YES
    #
    #
    # Activate directory messages - messages given to remote users when they  
    # go into a certain directory.
    #  ####——激活文件夹信息,当远程用户更改文件夹时,将出现提示信息。
    dirmessage_enable=YES
    #
    #
    # Activate logging of uploads/downloads.
    #  ####——启用上传和下载日志功能。
    xferlog_enable=YES
    #
    #
    # Make sure PORT transfer connections originate from port 20 (ftp-data).
    #  ####——启用FTPserver数据port的连接请求。


    connect_from_port_20=YES
    #
    #
    # If you want, you can arrange for uploaded anonymous files to be owned by
    # a different user. Note! Using "root" for uploaded files is not
    # recommended!
    #chown_uploads=YES
    #chown_username=whoever
    #
    #
    # You may override where the log file goes if you like. The default is shown
    # below.
    #  ####——设置日志文件的文件名称及存储路径。默认是/var/log/vsftpd.log。启用时须要将此句前面的“#”去掉。
    #xferlog_file=/var/log/vsftpd.log
    #
    #
    # If you want, you can have your log file in standard ftpd xferlog format
    #  ####——是否使用标准的ftpd xferlog日志文件格式。默认是启用的。
    xferlog_std_format=YES
    #
    #
    # You may change the default value for timing out an idle session.
    #  ####——设置空暇的用户会话中断时间,默认是10分钟。启用时须要将此句前面的“#”去掉。
    #idle_session_timeout=600
    #
    #
    # You may change the default value for timing out a data connection.
    #  ####——设置连接超时的时间。默认是120秒。

    启用时须要将此句前面的“#”去掉。
    #data_connection_timeout=120
    #
    #
    # It is recommended that you define on your system a unique user which the
    # ftp server can use as a totally isolated and unprivileged user.
    #nopriv_user=ftpsecure
    #
    #
    # Enable this and the server will recognise asynchronous ABOR requests. Not
    # recommended for security (the code is non-trivial). Not enabling it,
    # however, may confuse older FTP clients. #async_abor_enable=YES
    #
    #
    # By default the server will pretend to allow ASCII mode but in fact ignore
    # the request. Turn on the below options to have the server actually do ASCII
    # mangling on files when in ASCII mode.
    # Beware that on some FTP servers, ASCII support allows a denial of service
    # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
    # predicted this attack and has always been safe, reporting the size of the
    # raw file.
    # ASCII mangling is a horrible feature of the protocol.
    #  ####——是否同意使用ascii格式上传和下载文件。默认下是“YES”同意。当须要启用时须要将此句前面的“#”去掉就可以。
    #ascii_upload_enable=YES
    #ascii_download_enable=YES
    #
    #
    # You may fully customise the login banner string:
    #  ####——设置FTP用户登录server时显示的欢迎信息。

    当须要启用时须要将此句前面的“#”去掉就可以。
    #ftpd_banner=Welcome to blah FTP service.
    #
    #
    # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks.
    #deny_email_enable=YES
    # (default follows)
    #banned_email_file=/etc/vsftpd/banned_emails
    #
    #
    # You may specify an explicit list of local users to chroot() to their home
    # directory. If chroot_local_user is YES, then this list becomes a list of
    # users to NOT chroot().
    #  ####——假设希望用户登录后不能切换到自己文件夹以外的其它文件夹,须要去掉此句前面的“#”,启用此句。假设启用此项功能,那么仅仅同意/etc/vsftpd.chroot_list中列出的用户具有该功能。假设希望全部的本地用户都具有此功能。能够在后面添加一行代码:chroot_local_user=YES。
    #chroot_list_enable=YES
    # (default follows)
    #chroot_list_file=/etc/vsftpd/chroot_list
    #
    #
    # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large
    # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES
    #

    #  ####——设置PAM认证服务的配置文件名,该文件存放在/etc/pam.d/文件夹下。


    pam_service_name=vsftpd
    #  ####——用户列表中的用户是否同意登录到FTPserver。默认是不同意。


    userlist_enable=YES
    #enable for standalone mode
    #  ####——使vsftpd处于独立启动模式。


    listen=YES
    #  ####——使用tcp_wrappers作为主机訪问控制方式。


    tcp_wrappers=YES   
    ####——额外配置
    #
    #
    #  ####——设置连接server的最大并发连接数和用户的最大线程
    #max_clients=100      //设置同一时候连接FTPserver的并发用户为100
    #max_per_ip=2         //设置每用户同一时段并发下载线程数为2,同一时候仅仅可下面载两个文件
    #
    #
    #  ####——设置匿名用户和本地用户的最大传输速率
    #anon_max_rate=20000     //设置匿名用户的最大传输速率为20Kbps
    #local_max_rate=1000000  //设置本地用户的最大传输速率为1Mbps
    #
    #
    #  ####——禁止某些IP段的匿名用户訪问FTPserver
    #首先确认配置文件/etc/vsftpd/vsftpd.conf中有例如以下语句且是启用的:
    #tcp_wrappers=YES
    #用gedit改动文件/etc/hosts.allow例如以下所看到的:
    #hosts.allow This file describes the names of the hosts which are
    #      allowed to use the local INET services,as decided
    #      by the '/usr/sbin/tcpd' server.
    vsftpd:192.168.1.9:DENY       //限制IP地址为192.168.1.9和192.168.1.12的主机訪问FTPserver,
    vsftpd:192.168.1.12:DENY        切记,一定要在IP地址前面加上“vsftpd:”。


    #
    #
    # ####——同意用户列表中的用户訪问FTPserver。其它不在列表中的用户禁止訪问
    #userlist_enable=yes
    #userlist_deny=NO
    #userlist_file=/etc/vsftpd/user_list
    #
    #
    # ####——更改FTPserver默认的port号和IP地址,在配置文件/etc/vsftpd/vsftpd.conf中加入例如以下语句(去除凝视符号):
    #listen_port=5555       //指定serverport号为“5555”,注意:port号要尽量大于4000
    #listen_address=192.168.0.3  //指定server监听的IP地址为192.168.0.3

    # ####——基本操作命令
    1、查询vsftpd是否安装命令   rpm -qa | grep vsftpd
    2、关闭、启动、重新启动、状态命令
      /etc/rc.d/init.d/vsftpd stop|start|restart|status  
    service vsftpd stop|start|restart|status # #  
    server性能优化命令集:
    One_process_model=YES  ——每一个IP单一进程模式
    Idle_session_timeout=120  ——踢出空暇2分钟后的用户
    Data_connection_timeout=300  ——踢出空暇5分钟后的下载
    Accept_timeout=60   ——踢出挂起1分钟后的被动连接
    Connect_timeout=60   ——踢出挂起1分钟后的活动连接
    Anon_max_rate=50000   ——匿名用户最大传输速率为50kb/s 
    匿名账户配置命令集:
    anonymous_enable=YES           ——同意匿名账户登录
    anon_mkdir_write_enable=YES      ——开启匿名账户创建文件夹和写入文件权限
    anon_upload_enable=YES          ——开启匿名账户上传权限
    anon_world_readable_only=NO      ——匿名账户不仅仅仅有下载权限
    anon_umask=022                 ——新增文件的权限
    anon_other_write_enable=NO       ——关闭匿名账户删除、改名权限
    anon_max_rate=50000             ——限制最大传输速率
    anon_root=/var/ftp/                ——设定匿名账户登录的根文件夹
    no_anon_password=YES           ——匿名用户不用输入密码
    ftp_username=test                 ——指定匿名账户的相应本地账户
    chown_uploads=YES              ——匿名上传文件的属主为以下指定账户
    chown_username=test              ——匿名上传文件的属主的账户 
    本地账户配置命令集
    local_enable=YES                     ——同意本地账户登录
    write_enable=YES                     ——开启本地账户的写权限
    local_umask=022                      ——新增文件的权限
    chroot_local_enable=YES               ——本地账户不能切换到家文件夹之外
    chroot_list_enable=YES                 ——同意某些本地账户能够切换到外面
    chroot_list_file=/etc/vsftpd/chroot_list      ——同意切换到外面的本地账户列表
    local_root=/home/test                   ——设定本地账户登录的根文件夹
    chmod_enable=YES                    ——本地账户可改动文件权限(SITE CHMOD)
    local_max_rate=1000000                ——本地账户的最大传输速率 
    虚拟用户配置命令集
    guest_enable=yes   ——启用虚拟用户
    guest_username=ftp   ——指定虚拟用户映射的本地用户,默觉得ftp,能够更改

    
  • 相关阅读:
    HTML 照片从模糊到清晰的渐变加载显示方法
    Vue -- 从vue-cli 到@vue/cli 安装
    Vue -- highcharts map使用
    Vue -- admin
    EXCEL根据行列值查询得到交叉点值的方法
    如何使用curl命令测试负载均衡SLB会话保持的有效性
    centos7 pdsh安装
    selenium调用Chrome时自动选择证书
    jenkins使用 HTML Publisher插件后查看 html 报告显示不正常
    spring boot Jackson忽略字段不序列化字段
  • 原文地址:https://www.cnblogs.com/bhlsheji/p/5238507.html
Copyright © 2011-2022 走看看