zoukankan      html  css  js  c++  java
  • HDU 4635 Strongly connected(强连通)经典

    Strongly connected

    Time Limit: 2000/1000 MS (Java/Others)    Memory Limit: 32768/32768 K (Java/Others)
    Total Submission(s): 1828    Accepted Submission(s): 752


    Problem Description
    Give a simple directed graph with N nodes and M edges. Please tell me the maximum number of the edges you can add that the graph is still a simple directed graph. Also, after you add these edges, this graph must NOT be strongly connected.
    A simple directed graph is a directed graph having no multiple edges or graph loops.
    A strongly connected digraph is a directed graph in which it is possible to reach any node starting from any other node by traversing edges in the direction(s) in which they point.
     

    Input
    The first line of date is an integer T, which is the number of the text cases.
    Then T cases follow, each case starts of two numbers N and M, 1<=N<=100000, 1<=M<=100000, representing the number of nodes and the number of edges, then M lines follow. Each line contains two integers x and y, means that there is a edge from x to y.
     

    Output
    For each case, you should output the maximum number of the edges you can add.
    If the original graph is strongly connected, just output -1.
     

    Sample Input
    3 3 3 1 2 2 3 3 1 3 3 1 2 2 3 1 3 6 6 1 2 2 3 3 1 4 5 5 6 6 4
     

    Sample Output
    Case 1: -1 Case 2: 1 Case 3: 15
     

    Source
    题意:给一个n个点的简单有向图,问最多能加多少条边使得该图仍然是简单有向图,且不是强连通图。简单有向图定义:没有重边。无自环。 强连通图:整个图缩点后就仅仅有一个点。里面包括n个原点,也就是一个连通分量。

    假设一開始就是一个强连通图。则输出-1。

    解题:要加边最多那么加边后的图连通分量越少越好,那么连通分量最少也就是2个。先用n个点构造一个全然图(有向图有:n*(n-1)条边,无向图有:n*(n-1)/2条边)。再用构造的边 减去原来有的m条边=ans。再用强连通算法缩点。记录每一个新点包括点的个数,从入度为0或出度为0的新点中找出包括点数最小的minnum,再用上面剩余的边ans - minnum*(n-minnum)就是所要的答案。

    由于假设不减入度为0或出度为0相关的边,那么该点本身包括有入边和出边。加的边永远都是强连通图。所以仅仅能去掉与入度为0或出度为0点的相关边,仅仅减掉一个方向的边,要么全是(n-minnum)点数到minnum点数的入边,那么是minnum点数到(n-minnum)点数的出边。

    #include<stdio.h>
    #include<string.h>
    #include<algorithm>
    using namespace std;
    #define ll __int64
    const int N = 100005;
    struct EDG{
        int to,next;
    }edg[N];
    int eid,head[N];
    int low[N],dfn[N],vist[N],num[N],id[N],deep,stack1[N],tn,top;
    int in[N],out[N];
    
    void init(){
        eid=tn=top=deep=0;
        memset(head,-1,sizeof(head));
        memset(vist,0,sizeof(vist));
        memset(in,0,sizeof(in));
        memset(out,0,sizeof(out));
        memset(num,0,sizeof(num));
    }
    void addEdg(int u,int v){
        edg[eid].to=v; edg[eid].next=head[u]; head[u]=eid++;
    }
    void tarjer(int u){
        stack1[++top]=u;
        vist[u]=1;
        deep++;
        low[u]=dfn[u]=deep;
        for(int i=head[u]; i!=-1; i=edg[i].next){
            int v=edg[i].to;
            if(vist[v]==0){
                vist[v]=1;
                tarjer(v);
                low[u]=min(low[u],low[v]);
            }
            else if(vist[v]==1)
                low[u]=min(low[u],dfn[v]);
        }
        if(low[u]==dfn[u]){
            tn++;
            do{
                vist[stack1[top]]=2;
                num[tn]++;
                id[stack1[top]]=tn;
            }while(stack1[top--]!=u);
    
        }
    }
    ll solve(int n,int m){
        ll ans=n*(n-1)-m;
        int minnum=N;
        for(int i=1; i<=n; i++)
            if(vist[i]==0)
             tarjer(i);
        if(tn==1) return -1;
        for(int u=1; u<=n; u++)
        for(int i=head[u]; i!=-1; i=edg[i].next){
            int v=edg[i].to;
            if(id[u]!=id[v])
                in[id[v]]++,out[id[u]]++;
        }
        for(int i=1; i<=tn; i++)
        if(in[i]==0||out[i]==0){
            minnum=min(minnum,num[i]);
        }
        ans-=minnum*(n-minnum);
        
        return ans;
    }
    int main(){
        int T,n,m,c=0,a,b;
        scanf("%d",&T);
        while(T--){
            scanf("%d%d",&n,&m);
            init();
            for(int i=1; i<=m; i++)
            {
                scanf("%d%d",&a,&b);
                addEdg(a,b);
            }
            printf("Case %d: %I64d
    ",++c,solve(n,m));
        }
    }
    


  • 相关阅读:
    快速排序
    常见的正则表达式验证(更新中)
    中介者模式
    RadioButtonList控件如何取得选中的值
    职责链模式
    设计模式之GOF23建造者模式
    设计模式之GOF23工厂模式02
    设计模式GOF23之工厂模式01
    多线程测试时的辅助类--CountDownLatch
    设计模式GOF23之单例模式
  • 原文地址:https://www.cnblogs.com/brucemengbm/p/6792282.html
Copyright © 2011-2022 走看看