zoukankan      html  css  js  c++  java
  • 各版本CRM所需端口号

    以下是微软官方提供的CRM端口号列表,收藏一下:

    4.0 :https://msdn.microsoft.com/en-us/library/dd979226(v=crm.6).aspx

    This section describes the ports that are used for Microsoft Dynamics CRM. This information is useful and helpful as you configure the network when users connect through a firewall.

    Network ports for the Microsoft Dynamics CRM Web application

    The following table lists the ports used for a server that is running a full-server installation of Microsoft Dynamics CRM. Moreover, except for the Microsoft SQL Server role, and the Microsoft Dynamics CRM Connector for SQL Server Reporting Services server role, all server roles are installed on the same computer.

    Protocol

    Port

    Description

    Explanation

    TCP

    80

    HTTP

    Default Web application port. This port may be different as it can be changed during Microsoft Dynamics CRM Setup. For new Web sites, the default port number is 5555.

    TCP

    135

    MSRPC

    RPC endpoint resolution.

    TCP

    139

    NETBIOS-SSN

    NETBIOS session service.

    TCP

    443

    HTTPS

    Default secure HTTP port. The port number may differ from the default port. This secure network transport must be manually configured. Although this port is not required to run Microsoft Dynamics CRM, we strongly recommend it. For information about how to configure HTTPS for Microsoft Dynamics CRM, see Make Microsoft Dynamics CRM 4.0 client-to-server network communications more secure.

    TCP

    445

    Microsoft-DS

    Active Directory service required for Active Directory access and authentication.

    UDP

    123

    NTP

    Network Time Protocol.

    UDP

    137

    NETBIOS-NS

    NETBIOS name service.

    UDP

    138

    NETBIOS-dgm

    NETBIOS datagram service.

    UDP

    445

    Microsoft-DS

    Active Directory service required for Active Directory access and authentication.

    UDP

    1025

    Blackjack

    DCOM, used as an RPC listener

     

    Network ports that are used by the SQL Server that runs the Microsoft Dynamics CRM Connector for SQL Server Reporting Services server roles

    The following table lists the ports that are used for a computer that is running SQL Server and has only SQL Server and the Microsoft Dynamics CRM Connector for SQL Server Reporting Services server roles installed.

    Protocol

    Port

    Description

    Explanation

    TCP

    135

    MSRPC

    RPC endpoint resolution.

    TCP

    139

    NETBIOS-SSN

    NETBIOS session service.

    TCP

    445

    Microsoft-DS

    Active Directory required for Active Directory access and authentication.

    TCP

    1433

    ms-sql-s

    SQL Server sockets service. This port is required for access to SQL Server. Note that, this number may be different if you have configured your SQL Server to use a different port number.

    UDP

    123

    NTP

    Network Time Protocol.

    UDP

    137

    NETBIOS-NS

    NETBIOS name service.

    UDP

    138

    NETBIOS-dgm

    NETBIOS datagram service.

    UDP

    445

    Microsoft-DS

    Active Directory directory service required for Active Directory access and authentication.

    UDP

    1025

    Blackjack

    DCOM, used as an RPC listener

     

    2011:https://technet.microsoft.com/en-us/library/hh699823(v=crm.5).aspx

    This section describes the ports that are used for Microsoft Dynamics CRM. This information is helpful as you configure the network when users connect through a firewall.

    In This Topic

    Network ports for the Microsoft Dynamics CRM Web application

    The following table lists the ports used for a server that is running a Full Server installation of Microsoft Dynamics CRM. Moreover, except for the Microsoft SQL Server role, and the Microsoft Dynamics CRM Connector for SQL Server Reporting Services server role, all server roles are installed on the same computer.

     

    ProtocolPortDescriptionExplanation

    TCP

    80

    HTTP

    Default Web application port. This port may be different as it can be changed during Microsoft Dynamics CRM Server Setup. For new Web sites, the default port number is 5555.

    TCP

    135

    MSRPC

    RPC endpoint resolution.

    TCP

    139

    NETBIOS-SSN

    NETBIOS session service.

    TCP

    443

    HTTPS

    Default secure HTTP port. The port number may differ from the default port. This secure network transport must be manually configured. Although this port is not required to run Microsoft Dynamics CRM, we strongly recommend it. For information about how to configure HTTPS for Microsoft Dynamics CRM, see “Make Microsoft Dynamics CRM client-to-server network communications more secure” in Microsoft Dynamics CRM 2011 Post-Installation and Configuration Guidelines in the Installing Guide.

    TCP

    445

    Microsoft-DS

    Active Directory service required for Active Directory access and authentication.

    UDP

    123

    NTP

    Network Time Protocol.

    UDP

    137

    NETBIOS-NS

    NETBIOS name service.

    UDP

    138

    NETBIOS-dgm

    NETBIOS datagram service.

    UDP

    445

    Microsoft-DS

    Active Directory service required for Active Directory access and authentication.

    UDP

    1025

    Blackjack

    DCOM, used as an RPC listener.

    ImportantImportant
    Depending on your domain trust configuration, additional network ports may need to be available for Microsoft Dynamics CRM to work correctly. For more information, see How to configure a firewall for domains and trusts.

    Network ports for the Asynchronous Service, Web Application Server, and Sandbox Processing Service server roles

    The following table lists the additional ports that are used for a deployment where the Sandbox Processing Service is running on a separate computer.

     

    ProtocolPortDescriptionExplanation

    TCP

    808

    CRM server role communication

    The Asynchronous Service and Web Application Server services communicate to the Sandbox Processing Service through this channel. The default port is 808, but can be changed in the Windows registry by adding the DWORD registry value TcpPort in the key HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSCRM.

    Network ports that are used by the SQL Server that runs the Microsoft Dynamics CRM Reporting Extensions server roles

    The following table lists the ports that are used for a computer that is running SQL Server and has only SQL Server and the Microsoft Dynamics CRM Reporting Extensions server roles installed.

     

    ProtocolPortDescriptionExplanation

    TCP

    135

    MSRPC

    RPC endpoint resolution.

    TCP

    139

    NETBIOS-SSN

    NETBIOS session service.

    TCP

    445

    Microsoft-DS

    Active Directory service required for Active Directory access and authentication.

    TCP

    1433

    ms-sql-s

    SQL Server sockets service. This port is required for access to SQL Server.This number may be different if you have configured your default instance of SQL Server to use a different port number or you are using a named instance.

    UDP

    123

    NTP

    Network Time Protocol.

    UDP

    137

    NETBIOS-NS

    NETBIOS name service.

    UDP

    138

    NETBIOS-dgm

    NETBIOS datagram service.

    UDP

    445

    Microsoft-DS

    Active Directory service required for Active Directory access and authentication.

    UDP

    1025

    Blackjack

    DCOM, used as an RPC listener.

     

    2013:https://technet.microsoft.com/en-us/library/hh699823(v=crm.6).aspx

    This section describes the ports that are used for Microsoft Dynamics CRM. This information is helpful as you configure the network when users connect through a firewall.

    Network ports for the Microsoft Dynamics CRM web application


    The following table lists the ports used for a server that is running a Full Server installation of Microsoft Dynamics CRM. Moreover, except for the Microsoft SQL Server role, and the Microsoft Dynamics CRM Reporting Extensions server role, all server roles are installed on the same computer.

     

    ProtocolPortDescriptionExplanation

    TCP

    80

    HTTP

    Default web application port. This port may be different as it can be changed during Microsoft Dynamics CRM Server Setup. For new websites, the default port number is 5555.

    TCP

    135

    MSRPC

    RPC endpoint resolution.

    TCP

    139

    NETBIOS-SSN

    NETBIOS session service.

    TCP

    443

    HTTPS

    Default secure HTTP port. The port number may differ from the default port. This secure network transport must be manually configured. Although this port is not required to run Microsoft Dynamics CRM, we strongly recommend it. For information about how to configure HTTPS for CRM, see “Make Microsoft Dynamics CRM client-to-server network communications more secure” in Post-Installation and Configuration Guidelines in the Installing Guide.

    TCP

    445

    Microsoft-DS

    Active Directory service required for Active Directory access and authentication.

    UDP

    123

    NTP

    Network Time Protocol.

    UDP

    137

    NETBIOS-NS

    NETBIOS name service.

    UDP

    138

    NETBIOS-dgm

    NETBIOS datagram service.

    UDP

    445

    Microsoft-DS

    Active Directory service required for Active Directory access and authentication.

    UDP

    1025

    Blackjack

    DCOM, used as an RPC listener.

    ImportantImportant
    Depending on your domain trust configuration, additional network ports may need to be available for Microsoft Dynamics CRM to work correctly. More information: How to configure a firewall for domains and trusts

    Network ports for the Asynchronous Service, Web Application Server, and Sandbox Processing Service server roles


    The following table lists the additional ports that are used for a deployment where the Sandbox Processing Service is running on a separate computer.

     

    ProtocolPortDescriptionExplanation

    TCP

    808

    CRM server role communication

    The Asynchronous Service and Web Application Server services communicate to the Sandbox Processing Service through this channel. The default port is 808, but can be changed in the Windows registry by adding the DWORD registry value TcpPort in the key HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSCRM.

    Network ports for the Deployment Web Service server role


    The following table lists the additional port that is used by the Deployment Web Service server role.

     

    ProtocolPortDescriptionExplanation

    TCP

    808

    Used for Fetch-based reports

    Client computers that are running Fetch-based reports communicate over this port when communicating with the computer that is running the Deployment Web Service server role.

    Network ports that are used by the SQL Server that runs the SQL Server and Microsoft Dynamics CRM Reporting Extensions server roles


    The following table lists the ports that are used for a computer that is running SQL Server and has only SQL Server and the Microsoft Dynamics CRM Reporting Extensions (SRS Data Connector) server roles installed.

     

    ProtocolPortDescriptionExplanation

    TCP

    135

    MSRPC

    RPC endpoint resolution.

    TCP

    139

    NETBIOS-SSN

    NETBIOS session service.

    TCP

    445

    Microsoft-DS

    Active Directory service required for Active Directory access and authentication.

    TCP

    1433

    ms-sql-s

    SQL Server sockets service. This port is required for access to SQL Server. This number may be different if you have configured your default instance of SQL Server to use a different port number or you are using a named instance.

    UDP

    123

    NTP

    Network Time Protocol.

    UDP

    137

    NETBIOS-NS

    NETBIOS name service.

    UDP

    138

    NETBIOS-dgm

    NETBIOS datagram service.

    UDP

    445

    Microsoft-DS

    Active Directory service required for Active Directory access and authentication.

    UDP

    1025

    Blackjack

    DCOM, used as an RPC listener.

    ImportantImportant
    In addition to the ports listed previously, UDP port 1434 (SQL Server Browser Service) on the SQL Server is required by Microsoft Dynamics CRM Server Setup to return a list of the computers that are running SQL Server during the installation of Microsoft Dynamics CRM Server. To work around this, specify the SQLServerInstanceName during Setup.

     
     
     

    This section describes the ports that are used for Microsoft Dynamics CRM. This information is helpful as you configure the network when users connect through a firewall.

    Network ports for the Microsoft Dynamics CRM web application

    The following table lists the ports used for a server that is running a Full Server installation of Microsoft Dynamics CRM. Moreover, except for the Microsoft SQL Server role, and the Microsoft Dynamics CRM Reporting Extensions server role, all server roles are installed on the same computer.

     

    ProtocolPortDescriptionExplanation

    TCP

    80

    HTTP

    Default web application port. This port may be different as it can be changed during Microsoft Dynamics CRM Server Setup. For new websites, the default port number is 5555.

    TCP

    135

    MSRPC

    RPC endpoint resolution.

    TCP

    139

    NETBIOS-SSN

    NETBIOS session service.

    TCP

    443

    HTTPS

    Default secure HTTP port. The port number may differ from the default port. This secure network transport must be manually configured. Although this port is not required to run Microsoft Dynamics CRM, we strongly recommend it. For information about how to configure HTTPS for CRM, see “Make Microsoft Dynamics CRM client-to-server network communications more secure” in Post-installation and configuration guidelines for Microsoft Dynamics CRM in the Installing Guide.

    TCP

    445

    Microsoft-DS

    Active Directory service required for Active Directory access and authentication.

    UDP

    123

    NTP

    Network Time Protocol.

    UDP

    137

    NETBIOS-NS

    NETBIOS name service.

    UDP

    138

    NETBIOS-dgm

    NETBIOS datagram service.

    UDP

    445

    Microsoft-DS

    Active Directory service required for Active Directory access and authentication.

    UDP

    1025

    Blackjack

    DCOM, used as an RPC listener.

    ImportantImportant
    Depending on your domain trust configuration, additional network ports may need to be available for Microsoft Dynamics CRM to work correctly. More information: How to configure a firewall for domains and trusts

    Network ports for the Asynchronous Service, Web Application Server, and Sandbox Processing Service server roles

    The following table lists the additional ports that are used for a deployment where the Sandbox Processing Service is running on a separate computer.

     

    ProtocolPortDescriptionExplanation

    TCP

    808

    CRM server role communication

    The Asynchronous Service and Web Application Server services communicate to the Sandbox Processing Service through this channel. The default port is 808, but can be changed in the Windows registry by adding the DWORD registry value TcpPort in the key HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSCRM.

    Network ports for the Deployment Web Service server role

    The following table lists the additional port that is used by the Deployment Web Service server role.

     

    ProtocolPortDescriptionExplanation

    TCP

    808

    Used for Fetch-based reports

    Client computers that are running Fetch-based reports communicate over this port when communicating with the computer that is running the Deployment Web Service server role.

    Network ports that are used by the SQL Server that runs the SQL Server and Microsoft Dynamics CRM Reporting Extensions server roles

    The following table lists the ports that are used for a computer that is running SQL Server and has only SQL Server and the Microsoft Dynamics CRM Reporting Extensions (SRS Data Connector) server roles installed.

     

    ProtocolPortDescriptionExplanation

    TCP

    135

    MSRPC

    RPC endpoint resolution.

    TCP

    139

    NETBIOS-SSN

    NETBIOS session service.

    TCP

    445

    Microsoft-DS

    Active Directory service required for Active Directory access and authentication.

    TCP

    1433

    ms-sql-s

    SQL Server sockets service. This port is required for access to SQL Server. This number may be different if you have configured your default instance of SQL Server to use a different port number or you are using a named instance.

    UDP

    123

    NTP

    Network Time Protocol.

    UDP

    137

    NETBIOS-NS

    NETBIOS name service.

    UDP

    138

    NETBIOS-dgm

    NETBIOS datagram service.

    UDP

    445

    Microsoft-DS

    Active Directory service required for Active Directory access and authentication.

    UDP

    1025

    Blackjack

    DCOM, used as an RPC listener.

    ImportantImportant
    In addition to the ports listed previously, UDP port 1434 (SQL Server Browser Service) on the SQL Server is required by Microsoft Dynamics CRM Server Setup to return a list of the computers that are running SQL Server during the installation of Microsoft Dynamics CRM Server. To work around this, specify the SQLServerInstanceName during Setup.
  • 相关阅读:
    铁锨,挖土机,
    viewwillapear ,viewdidload,
    调用方法,for 选好调用方法,要避免哦
    原来多行就这么容易被我搞定了,自动的哈,
    睡觉会,
    小程序运行时相关信息
    小程序框架之视图层 View~获取界面节点信息
    小程序框架之视图层 View~基础组件
    微信小程序使用本地图片在真机不显示的问题
    小程序生命周期(onLaunch、onShow、onHide、onReady、onLoad、onUnloa)
  • 原文地址:https://www.cnblogs.com/caizhidao/p/4747672.html
Copyright © 2011-2022 走看看