kubernetes1.9 手动安装

一、创建TLS证书和秘钥：

1、安装 CFSSL：

wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64
chmod +x cfssl_linux-amd64
mv cfssl_linux-amd64 /usr/local/bin/cfssl

wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
chmod +x cfssljson_linux-amd64
mv cfssljson_linux-amd64 /usr/local/bin/cfssljson

wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64
chmod +x cfssl-certinfo_linux-amd64
mv cfssl-certinfo_linux-amd64 /usr/local/bin/cfssl-certinfo

export PATH=/usr/local/bin:$PATH

2、创建 CA 配置文件：

mkdir /root/ssl
cd /root/ssl
cfssl print-defaults config > config.json
cfssl print-defaults csr > csr.json

# 根据config.json文件的格式创建如下的ca-config.json文件

# 过期时间设置成了 87600h

cat > ca-config.json <<EOF
{
  "signing": {
    "default": {
      "expiry": "87600h"
    },
    "profiles": {
      "kubernetes": {
        "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ],
        "expiry": "87600h"
      }
    }
  }
}
EOF

3、创建 CA 证书签名请求：

cat > ca-csr.json <<EOF
{
  "CN": "kubernetes",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "k8s",
      "OU": "System"
    }
  ]
}
EOF

4、生成 CA 证书和私钥：

$ cfssl gencert -initca ca-csr.json | cfssljson -bare ca
$ ls ca*
ca-config.json  ca.csr  ca-csr.json  ca-key.pem  ca.pem

5、创建 kubernetes 证书:

cat > kubernetes-csr.json <<EOF
{
    "CN": "kubernetes",
    "hosts": [
      "127.0.0.1",
      "192.168.73.61",
      "192.168.73.62",
      "192.168.73.63",
      "10.254.0.1",
      "kubernetes",
      "kubernetes.default",
      "kubernetes.default.svc",
      "kubernetes.default.svc.cluster",
      "kubernetes.default.svc.cluster.local"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "ST": "BeiJing",
            "L": "BeiJing",
            "O": "k8s",
            "OU": "System"
        }
    ]
}
EOF

6、生成 kubernetes 证书和私钥:

$ cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kubernetes-csr.json | cfssljson -bare kubernetes
$ ls kubernetes*
kubernetes.csr  kubernetes-csr.json  kubernetes-key.pem  kubernetes.pem

7、创建 admin 证书

cat > admin-csr.json <<EOF 
{
  "CN": "admin",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "system:masters",
      "OU": "System"
    }
  ]
}
EOF

8、生成 admin 证书和私钥：

$ cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes admin-csr.json | cfssljson -bare admin
$ ls admin*
admin.csr  admin-csr.json  admin-key.pem  admin.pem

9、创建 kube-proxy 证书:

cat > kube-proxy-csr.json <<EOF
{
  "CN": "system:kube-proxy",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "k8s",
      "OU": "System"
    }
  ]
}
EOF

10、生成 kube-proxy 客户端证书和私钥:

$ cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes  kube-proxy-csr.json | cfssljson -bare kube-proxy
$ ls kube-proxy*
kube-proxy.csr  kube-proxy-csr.json  kube-proxy-key.pem  kube-proxy.pem

校验证书:

$ openssl x509  -noout -text -in  kubernetes.pem
Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            6a:10:a0:d1:dc:43:c5:0a:a3:4f:d7:7e:d5:b8:3b:40:36:dc:71:40
    Signature Algorithm: sha256WithRSAEncryption
        Issuer: C=CN, ST=BeiJing, L=BeiJing, O=k8s, OU=System, CN=kubernetes
        Validity
            Not Before: Feb  6 07:59:00 2018 GMT
            Not After : Feb  4 07:59:00 2028 GMT
        Subject: C=CN, ST=BeiJing, L=BeiJing, O=k8s, OU=System, CN=kubernetes
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
                Public-Key: (2048 bit)
                Modulus:
                    00:b3:91:7d:a9:24:4d:5b:18:5a:ba:ad:e5:1f:e6:
                    7f:8b:3e:38:d6:b9:21:0e:d6:32:83:b5:1d:16:9f:
                    5f:13:5c:43:a8:ef:46:24:f6:70:47:9e:a8:00:32:
                    9a:18:e6:dd:18:a2:a5:9c:22:31:fe:17:ba:64:65:
                    86:3d:63:d4:d3:94:95:a9:56:2f:6c:66:ce:12:a9:
                    4e:e8:51:c1:c7:ed:91:13:f8:c4:05:4b:2b:4c:da:
                    e8:d6:9e:b6:8e:27:3e:cd:a5:ea:bd:00:bf:84:4a:
                    c5:ed:18:7b:ae:d8:fc:17:de:4c:98:3f:81:2c:56:
                    d9:0a:a1:1f:73:18:58:a7:14:ee:9f:60:a7:38:b5:
                    63:b8:15:84:a6:e0:de:73:f3:e4:ac:20:1b:8b:26:
                    02:1a:28:b1:dc:d9:ed:c4:04:88:ca:6d:9c:aa:fb:
                    3a:26:7d:cb:2d:4b:86:1b:2a:d5:8c:4d:62:9a:ea:
                    7c:56:a7:44:5b:af:13:83:e6:6f:c2:61:d0:a0:58:
                    6c:e6:43:dd:9b:a1:26:a7:ef:8f:a5:7c:3c:79:23:
                    bc:dc:1d:2f:6b:63:d5:c7:4a:92:db:20:b0:66:81:
                    ac:85:0c:04:2c:17:e5:02:f2:41:cd:44:76:87:e3:
                    45:91:aa:f3:fb:62:8a:de:14:fe:07:75:79:9f:ce:
                    d9:3b
...................

分发证书:

将生成的证书和秘钥文件（后缀名为.pem）拷贝到所有机器的 /etc/kubernetes/ssl 目录下备用；

mkdir -p /etc/kubernetes/ssl
cp *.pem /etc/kubernetes/ssl
scp *.pem root@192.168.78.62:/etc/kubernetes/ssl
scp *.pem root@192.168.78.63:/etc/kubernetes/ssl

二、安装配置高可用etcd：

 1、下载安装etcd

1、修改host文件及修改主机名：
192.168.73.61 k8s-master
192.168.73.62 k8s-node1
192.168.73.63 k8s-node2

hostnamectl set-hostname k8s-master
hostnamectl set-hostname k8s-node1
hostnamectl set-hostname k8s-node2

2、下载安装etd：
wget https://github.com/coreos/etcd/releases/download/v3.3.0/etcd-v3.3.0-linux-amd64.tar.gz
tar zxvf etcd-v3.3.0-linux-amd64.tar.gz 
cp etcd-v3.3.0-linux-amd64/etcd* /usr/local/bin/
mkdir /var/lib/etcd     #etcd的数据目录
mkdir /etc/etcd        #etcd的配置文件目录

2、编写etcd的配置文件/etc/etcd/etcd.conf：
k8s-master：

# [member]
ETCD_NAME=infra1
ETCD_DATA_DIR="/var/lib/etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.73.61:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.73.61:2379"

#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.73.61:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.73.61:2379"

k8s-node1：

# [member]
ETCD_NAME=infra2
ETCD_DATA_DIR="/var/lib/etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.73.62:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.73.62:2379"

#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.73.62:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.73.62:2379"

k8s-node2：

# [member]
ETCD_NAME=infra3
ETCD_DATA_DIR="/var/lib/etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.73.63:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.73.63:2379"

#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.73.63:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.73.63:2379"

3、编写etcd的启动文件/usr/lib/systemd/system/etcd.service：

[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
Documentation=https://github.com/coreos

[Service]
Type=notify
WorkingDirectory=/var/lib/etcd/
EnvironmentFile=-/etc/etcd/etcd.conf
ExecStart=/usr/local/bin/etcd 
  --name ${ETCD_NAME} 
  --cert-file=/etc/kubernetes/ssl/kubernetes.pem 
  --key-file=/etc/kubernetes/ssl/kubernetes-key.pem 
  --peer-cert-file=/etc/kubernetes/ssl/kubernetes.pem 
  --peer-key-file=/etc/kubernetes/ssl/kubernetes-key.pem 
  --trusted-ca-file=/etc/kubernetes/ssl/ca.pem 
  --peer-trusted-ca-file=/etc/kubernetes/ssl/ca.pem 
  --initial-advertise-peer-urls ${ETCD_INITIAL_ADVERTISE_PEER_URLS} 
  --listen-peer-urls ${ETCD_LISTEN_PEER_URLS} 
  --listen-client-urls ${ETCD_LISTEN_CLIENT_URLS},http://127.0.0.1:2379 
  --advertise-client-urls ${ETCD_ADVERTISE_CLIENT_URLS} 
  --initial-cluster-token ${ETCD_INITIAL_CLUSTER_TOKEN} 
  --initial-cluster infra1=https://192.168.73.61:2380,infra2=https://192.168.73.62:2380,infra3=https://192.168.73.63:2380 
  --initial-cluster-state new 
  --data-dir=${ETCD_DATA_DIR}
Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

 4、启动etcd及检查：

1、启动：
systemctl daemon-reload
systemctl enable etcd
systemctl start etcd
systemctl status etcd
2、检查：
$ etcdctl   --ca-file=/etc/kubernetes/ssl/ca.pem   --cert-file=/etc/kubernetes/ssl/kubernetes.pem   --key-file=/etc/kubernetes/ssl/kubernetes-key.pem   cluster-health
member 52908acb5b27845e is healthy: got healthy result from https://192.168.73.63:2379
member 5d00203b8ec1e6c4 is healthy: got healthy result from https://192.168.73.62:2379
member d47f2b47509db50a is healthy: got healthy result from https://192.168.73.61:2379
cluster is healthy

 三、在master上安装 kubectl及生成配置文件

 1、下载安装kubectl：

wget https://dl.k8s.io/v1.9.2/kubernetes-client-linux-amd64.tar.gz
tar -xzvf kubernetes-client-linux-amd64.tar.gz
cp kubernetes/client/bin/kube* /usr/bin/
chmod a+x /usr/bin/kube*

2、创建 kubectl kubeconfig 文件：

export KUBE_APISERVER="https://192.168.73.61:6443"
# 设置集群参数
kubectl config set-cluster kubernetes 
  --certificate-authority=/etc/kubernetes/ssl/ca.pem 
  --embed-certs=true 
  --server=${KUBE_APISERVER}
# 设置客户端认证参数
kubectl config set-credentials admin 
  --client-certificate=/etc/kubernetes/ssl/admin.pem 
  --embed-certs=true 
  --client-key=/etc/kubernetes/ssl/admin-key.pem
# 设置上下文参数
kubectl config set-context kubernetes 
  --cluster=kubernetes 
  --user=admin
# 设置默认上下文
kubectl config use-context kubernetes

3、创建 TLS Bootstrapping Token：

export BOOTSTRAP_TOKEN=$(head -c 16 /dev/urandom | od -An -t x | tr -d ' ')
cat > token.csv <<EOF
${BOOTSTRAP_TOKEN},kubelet-bootstrap,10001,"system:kubelet-bootstrap"
EOF

cp token.csv /etc/kubernetes/

scp token.csv root@192.168.73.62:/etc/kubernetes/

scp token.csv root@192.168.73.63:/etc/kubernetes/

4、创建 kubelet bootstrapping kubeconfig 文件：

cd /etc/kubernetes
export KUBE_APISERVER="https://192.168.73.61:6443"

# 设置集群参数
kubectl config set-cluster kubernetes 
  --certificate-authority=/etc/kubernetes/ssl/ca.pem 
  --embed-certs=true 
  --server=${KUBE_APISERVER} 
  --kubeconfig=bootstrap.kubeconfig

# 设置客户端认证参数
kubectl config set-credentials kubelet-bootstrap 
  --token=${BOOTSTRAP_TOKEN} 
  --kubeconfig=bootstrap.kubeconfig

# 设置上下文参数
kubectl config set-context default 
  --cluster=kubernetes 
  --user=kubelet-bootstrap 
  --kubeconfig=bootstrap.kubeconfig

# 设置默认上下文
kubectl config use-context default --kubeconfig=bootstrap.kubeconfig

5、创建 kube-proxy kubeconfig 文件：

export KUBE_APISERVER="https://192.168.73.61:6443"
# 设置集群参数
kubectl config set-cluster kubernetes 
  --certificate-authority=/etc/kubernetes/ssl/ca.pem 
  --embed-certs=true 
  --server=${KUBE_APISERVER} 
  --kubeconfig=kube-proxy.kubeconfig
# 设置客户端认证参数
kubectl config set-credentials kube-proxy 
  --client-certificate=/etc/kubernetes/ssl/kube-proxy.pem 
  --client-key=/etc/kubernetes/ssl/kube-proxy-key.pem 
  --embed-certs=true 
  --kubeconfig=kube-proxy.kubeconfig
# 设置上下文参数
kubectl config set-context default 
  --cluster=kubernetes 
  --user=kube-proxy 
  --kubeconfig=kube-proxy.kubeconfig
# 设置默认上下文
kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig

6、分发 kubeconfig 文件：

scp bootstrap.kubeconfig kube-proxy.kubeconfig root@192.168.73.62:/etc/kubernetes/
scp bootstrap.kubeconfig kube-proxy.kubeconfig root@192.168.73.63:/etc/kubernetes/

 四、在master安装kube-apiserver，kube-scheduler，kube-controller-manager

1、下载最新的二进制文件：

wget https://dl.k8s.io/v1.9.2/kubernetes-server-linux-amd64.tar.gz

tar -xzvf kubernetes-server-linux-amd64.tar.gz
cd kubernetes
tar -xzvf  kubernetes-src.tar.gz

cp -r server/bin/{kube-apiserver,kube-controller-manager,kube-scheduler,kubectl,kube-proxy,kubelet} /usr/local/bin/

 2、配置和启动kube-apiserver：

1）、配置文件：/usr/lib/systemd/system/kube-apiserver.service

[Unit]
Description=Kubernetes API Service
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target
After=etcd.service

[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/apiserver
ExecStart=/usr/local/bin/kube-apiserver 
        $KUBE_LOGTOSTDERR 
        $KUBE_LOG_LEVEL 
        $KUBE_ETCD_SERVERS 
        $KUBE_API_ADDRESS 
        $KUBE_API_PORT 
        $KUBELET_PORT 
        $KUBE_ALLOW_PRIV 
        $KUBE_SERVICE_ADDRESSES 
        $KUBE_ADMISSION_CONTROL 
        $KUBE_API_ARGS
Restart=on-failure
Type=notify
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

2）、配置文件：/etc/kubernetes/config

###
# kubernetes system config
#
# The following values are used to configure various aspects of all
# kubernetes services, including
#
#   kube-apiserver.service
#   kube-controller-manager.service
#   kube-scheduler.service
#   kubelet.service
#   kube-proxy.service
# logging to stderr means we get it in the systemd journal
KUBE_LOGTOSTDERR="--logtostderr=true"

# journal message level, 0 is debug
KUBE_LOG_LEVEL="--v=0"

# Should this cluster be allowed to run privileged docker containers
KUBE_ALLOW_PRIV="--allow-privileged=true"

# How the controller-manager, scheduler, and proxy find the apiserver
KUBE_MASTER="--master=http://192.168.73.71:8080"

3）、配置文件：/etc/kubernetes/apiserver

###
## kubernetes system config
##
## The following values are used to configure the kube-apiserver
##
#
## The address on the local server to listen to.
KUBE_API_ADDRESS="--advertise-address=192.168.73.71 --bind-address=192.168.73.71 --insecure-bind-address=192.168.73.71"
#
## The port on the local server to listen on.
#KUBE_API_PORT="--port=8080"
#
## Port minions listen on
#KUBELET_PORT="--kubelet-port=10250"
#
## Comma separated list of nodes in the etcd cluster
KUBE_ETCD_SERVERS="--etcd-servers=https://192.168.73.71:2379,https://192.168.73.72:2379,https://192.168.73.73:2379"
#
## Address range to use for services
KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16"
#
## default admission control policies
KUBE_ADMISSION_CONTROL="--admission-control=ServiceAccount,NamespaceLifecycle,NamespaceExists,LimitRanger,ResourceQuota"
#
## Add your own!
KUBE_API_ARGS="--authorization-mode=Node,RBAC --runtime-config=rbac.authorization.k8s.io/v1beta1 --kubelet-https=true --enable-bootstrap-token-auth --token-auth-file=/etc/kubernetes/token.csv --service-node-port-range=30000-32767 --tls-cert-file=/etc/kubernetes/ssl/kubernetes.pem --tls-private-key-file=/etc/kubernetes/ssl/kubernetes-key.pem --client-ca-file=/etc/kubernetes/ssl/ca.pem --service-account-key-file=/etc/kubernetes/ssl/ca-key.pem --etcd-cafile=/etc/kubernetes/ssl/ca.pem --etcd-certfile=/etc/kubernetes/ssl/kubernetes.pem --etcd-keyfile=/etc/kubernetes/ssl/kubernetes-key.pem --enable-swagger-ui=true --apiserver-count=3 --audit-log-maxage=30 --audit-log-maxbackup=3 --audit-log-maxsize=100 --audit-log-path=/var/lib/audit.log --event-ttl=1h"

4）、启动 kube-apiserver

systemctl daemon-reload
systemctl enable kube-apiserver
systemctl start kube-apiserver
systemctl status kube-apiserver

3、配置和启动 kube-controller-manager：

1）、配置文件：/usr/lib/systemd/system/kube-controller-manager.service  

[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/GoogleCloudPlatform/kubernetes

[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/controller-manager
ExecStart=/usr/local/bin/kube-controller-manager 
        $KUBE_LOGTOSTDERR 
        $KUBE_LOG_LEVEL 
        $KUBE_MASTER 
        $KUBE_CONTROLLER_MANAGER_ARGS
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

2）、配置文件：/etc/kubernetes/controller-manager

###
# The following values are used to configure the kubernetes controller-manager

# defaults from config and apiserver should be adequate

# Add your own!
KUBE_CONTROLLER_MANAGER_ARGS="--address=127.0.0.1 --service-cluster-ip-range=10.254.0.0/16 --cluster-name=kubernetes --cluster-signing-cert-file=/etc/kubernetes/ssl/ca.pem --cluster-signing-key-file=/etc/kubernetes/ssl/ca-key.pem  --service-account-private-key-file=/etc/kubernetes/ssl/ca-key.pem --root-ca-file=/etc/kubernetes/ssl/ca.pem --leader-elect=true"

3）、启动 kube-controller-manager

systemctl daemon-reload
systemctl enable kube-controller-manager
systemctl start kube-controller-manager
systemctl status kube-controller-manager

 4、配置和启动 kube-scheduler

1）、配置文件：/usr/lib/systemd/system/kube-scheduler.service

[Unit]
Description=Kubernetes Scheduler Plugin
Documentation=https://github.com/GoogleCloudPlatform/kubernetes

[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/scheduler
ExecStart=/usr/local/bin/kube-scheduler 
            $KUBE_LOGTOSTDERR 
            $KUBE_LOG_LEVEL 
            $KUBE_MASTER 
            $KUBE_SCHEDULER_ARGS
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

2）、配置文件：/etc/kubernetes/scheduler

###
# kubernetes scheduler config

# default config should be adequate

# Add your own!
KUBE_SCHEDULER_ARGS="--leader-elect=true --address=127.0.0.1"

3）、启动 kube-scheduler

systemctl daemon-reload
systemctl enable kube-scheduler
systemctl start kube-scheduler
systemctl status kube-scheduler

 5、验证功能：

$ kubectl get componentstatuses
NAME                 STATUS    MESSAGE             ERROR
controller-manager   Healthy   ok                  
scheduler            Healthy   ok                  
etcd-0               Healthy   {"health":"true"}   
etcd-1               Healthy   {"health":"true"}   
etcd-2               Healthy   {"health":"true"}   

 五、在所有节点安装flannel网络插件

1、安装（没有对版本有特殊要求）：

1、yum安装：
yum install -y flannel

2、二进制包安装：
wget https://github.com/coreos/flannel/releases/download/v0.10.0/flannel-v0.10.0-linux-amd64.tar.gz
tar zxvf flannel-v0.10.0-linux-amd64.tar.gz 
mkdir /usr/libexec/flannel/
cp mk-docker-opts.sh /usr/libexec/flannel/
cp flanneld /usr/local/bin

 2、配置和启动fannel：

1）、配置文件 /usr/lib/systemd/system/flanneld.service

[Unit]
Description=Flanneld overlay address etcd agent
After=network.target
After=network-online.target
Wants=network-online.target
After=etcd.service
Before=docker.service

[Service]
Type=notify
EnvironmentFile=/etc/sysconfig/flanneld
EnvironmentFile=-/etc/sysconfig/docker-network
ExecStart=/usr/local/bin/flanneld  
  -etcd-endpoints=${FLANNEL_ETCD_ENDPOINTS} 
  -etcd-prefix=${FLANNEL_ETCD_PREFIX} 
  $FLANNEL_OPTIONS
ExecStartPost=/usr/libexec/flannel/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/docker
Restart=on-failure

[Install]
WantedBy=multi-user.target
RequiredBy=docker.service

2）、配置文件 /etc/sysconfig/flanneld

# Flanneld configuration options  

# etcd url location.  Point this to the server where etcd runs
FLANNEL_ETCD_ENDPOINTS="https://192.168.73.71:2379,https://192.168.73.72:2379,https://192.168.73.73:2379"

# etcd config key.  This is the configuration key that flannel queries
# For address range assignment
FLANNEL_ETCD_PREFIX="/kube-centos/network"

# Any additional options that you want to pass
FLANNEL_OPTIONS="-etcd-cafile=/etc/kubernetes/ssl/ca.pem -etcd-certfile=/etc/kubernetes/ssl/kubernetes.pem -etcd-keyfile=/etc/kubernetes/ssl/kubernetes-key.pem"

3）、在etcd中创建网络配置（在master配置就行）

etcdctl --endpoints=https://192.168.73.71:2379,https://192.168.73.72:2379,https://192.168.73.73:2379 
  --ca-file=/etc/kubernetes/ssl/ca.pem 
  --cert-file=/etc/kubernetes/ssl/kubernetes.pem 
  --key-file=/etc/kubernetes/ssl/kubernetes-key.pem 
  mkdir /kube-centos/network
etcdctl --endpoints=https://192.168.73.71:2379,https://192.168.73.72:2379,https://192.168.73.73:2379 
  --ca-file=/etc/kubernetes/ssl/ca.pem 
  --cert-file=/etc/kubernetes/ssl/kubernetes.pem 
  --key-file=/etc/kubernetes/ssl/kubernetes-key.pem 
  mk /kube-centos/network/config '{"Network":"172.30.0.0/16","SubnetLen":24,"Backend":{"Type":"vxlan"}}'

4）、启动flannel

systemctl daemon-reload
systemctl enable flanneld
systemctl start flanneld
systemctl status flanneld

3、验证：

[root@k8s-master ~]# etcdctl --endpoints=${ETCD_ENDPOINTS} 
   --ca-file=/etc/kubernetes/ssl/ca.pem 
   --cert-file=/etc/kubernetes/ssl/kubernetes.pem 
   --key-file=/etc/kubernetes/ssl/kubernetes-key.pem 
   ls /kube-centos/network/subnets
/kube-centos/network/subnets/172.30.79.0-24
/kube-centos/network/subnets/172.30.47.0-24
/kube-centos/network/subnets/172.30.65.0-24

[root@k8s-master ~]# etcdctl --endpoints=${ETCD_ENDPOINTS} 
   --ca-file=/etc/kubernetes/ssl/ca.pem 
   --cert-file=/etc/kubernetes/ssl/kubernetes.pem 
   --key-file=/etc/kubernetes/ssl/kubernetes-key.pem 
   get /kube-centos/network/config
{"Network":"172.30.0.0/16","SubnetLen":24,"Backend":{"Type":"vxlan"}}

六、在所有节点安装配置docker、kubelet、kube-proxy

1、修改配置及安装docker

1）、注释掉swap及创建目录：

对于1.8以上的版本，需要修改/etc/fstab将，swap系统注释掉（重启系统才能生效，不然kubelet）

mkdir /var/lib/kubele

2）、安装docker：

docker17.03 安装：

yum remove docker docker-common container-selinux docker-selinux docker-engine  #移除旧的docker

yum install -y yum-utils 
yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
yum makecache
yum install -y policycoreutils-python
wget https://download.docker.com/linux/centos/7/x86_64/stable/Packages/docker-ce-selinux-17.03.2.ce-1.el7.centos.noarch.rpm
rpm -ivh docker-ce-selinux-17.03.2.ce-1.el7.centos.noarch.rpm
yum list docker-ce --showduplicates | sort -r     #查看所有所有版本包
yum -y install docker-ce-17.03.2.ce

3）、配置文件：/usr/lib/systemd/system/docker.service：

[Unit]
Description=Docker Application Container Engine
Documentation=https://docs.docker.com
After=network-online.target firewalld.service
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=-/run/flannel/docker
ExecStart=/usr/bin/dockerd  --insecure-registry=192.168.78.4 
                             --exec-opt native.cgroupdriver=systemd 
                             $OPTIONS 
                             $DOCKER_STORAGE_OPTIONS 
                             $DOCKER_NETWORK_OPTIONS 
                             $ADD_REGISTRY 
                             $BLOCK_REGISTRY 
                             $REGISTRIES

ExecReload=/bin/kill -s HUP $MAINPID

LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
TimeoutStartSec=0
Delegate=yes
KillMode=process
Restart=on-failure
StartLimitBurst=3
StartLimitInterval=60s

[Install]
WantedBy=multi-user.target

4）、启动docker：

systemctl daemon-reload
systemctl enable docker
systemctl start docker
systemctl status docker

2、给kubelet赋予权限（主节点执行）

cd /etc/kubernetes
kubectl create clusterrolebinding kubelet-bootstrap 
  --clusterrole=system:node-bootstrapper 
  --user=kubelet-bootstrap

3、分发kubelet和kube-proxy二进制文件

scp /root/kubernetes/server/bin/{kube-proxy,kubelet} root@192.168.73.72:/usr/local/bin/
scp /root/kubernetes/server/bin/{kube-proxy,kubelet} root@192.168.73.72:/usr/local/bin/
mkdir /var/lib/kubelet

 4、配置和启动kubelet

1）、配置文件（把地址改为本机地址） ：/usr/lib/systemd/system/kubelet.service

[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=docker.service
Requires=docker.service
[Service]
WorkingDirectory=/var/lib/kubelet
ExecStart=/usr/local/bin/kubelet 
--address=192.168.78.71 
--hostname-override=192.168.78.71 
--pod-infra-container-image=docker.io/kubernetes/pause 
--experimental-bootstrap-kubeconfig=/etc/kubernetes/bootstrap.kubeconfig 
--kubeconfig=/etc/kubernetes/ssl/kubelet.kubeconfig 
--cert-dir=/etc/kubernetes/ssl 
--hairpin-mode promiscuous-bridge 
--allow-privileged=true 
--serialize-image-pulls=false 
--logtostderr=true 
--cgroup-driver=systemd 
--cluster_dns=10.254.0.2 
--cluster_domain=cluster.local 
--v=2
Restart=on-failure
RestartSec=5
[Install]
WantedBy=multi-user.target

2）、启动kublet

systemctl daemon-reload
systemctl enable kubelet
systemctl start kubelet
systemctl status kubelet

3）、通过 kublet 的 TLS 证书请求

kubelet 首次启动时向 kube-apiserver 发送证书签名请求，必须通过后 kubernetes 系统才会将该 Node 加入到集群。
1、查看未授权的请求：
 kubectl get csr

2、通过csr请求：
kubectl get csr | awk '/Pending/ {print $1}' | xargs kubectl certificate approve
$ kubectl get nodes
NAME            STATUS    ROLES     AGE       VERSION
192.168.73.71   Ready     <none>    11m       v1.9.2
192.168.73.72   Ready     <none>    8m        v1.9.2
192.168.73.73   Ready     <none>    6m        v1.9.2

5、配置启动 kube-proxy

1）、安装conntrack

yum install -y conntrack-tools

2）、配置文件（把地址改为本机地址）：/usr/lib/systemd/system/kube-proxy.service

[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target

[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/proxy
ExecStart=/usr/local/bin/kube-proxy 
         --bind-address=192.168.73.71 
         --hostname-override=192.168.73.71 
         --kubeconfig=/etc/kubernetes/kube-proxy.kubeconfig 
         --cluster-cidr=10.254.0.0/16
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

3）、启动kube-proxy

systemctl daemon-reload
systemctl enable kube-proxy
systemctl start kube-proxy
systemctl status kube-proxy

 参考文档：https://jimmysong.io/kubernetes-handbook/