Netty源码分析——Channel注册

这一节与上一节关联比较大，已经设计到netty比较核心的内容了，继续加油！

首先说一下，这里说的“注册”是什么意思，我当时看源码的时候对这里也比较困惑，纠结了好长时间。

其实简单来说就是将初始化好的channel与创建好的EventLoop关联起来，就是让EventLoop的线程run起来，一直监听这个channel，这么说明白了吧。

下面来说具体怎么做的。

    final ChannelFuture initAndRegister() {
        Channel channel = null;
        try {
            channel = channelFactory.newChannel();
            init(channel);
        } catch (Throwable t) {
            if (channel != null) {
                // channel can be null if newChannel crashed (eg SocketException("too many open files"))
                channel.unsafe().closeForcibly();
            }
            // as the Channel is not registered yet we need to force the usage of the GlobalEventExecutor
            return new DefaultChannelPromise(channel, GlobalEventExecutor.INSTANCE).setFailure(t);
        }

        ChannelFuture regFuture = config().group().register(channel);  //本节的流程是从这里开始的
        if (regFuture.cause() != null) {
            if (channel.isRegistered()) {
                channel.close();
            } else {
                channel.unsafe().closeForcibly();
            }
        }

        // If we are here and the promise is not failed, it's one of the following cases:
        // 1) If we attempted registration from the event loop, the registration has been completed at this point.
        //    i.e. It's safe to attempt bind() or connect() now because the channel has been registered.
        // 2) If we attempted registration from the other thread, the registration request has been successfully
        //    added to the event loop's task queue for later execution.
        //    i.e. It's safe to attempt bind() or connect() now:
        //         because bind() or connect() will be executed *after* the scheduled registration task is executed
        //         because register(), bind(), and connect() are all bound to the same thread.

        return regFuture;
    }

追进到MultithreadEventLoopGroup类的register方法，这个next()方法其实我在之前提过，就是通过选择器找到下一个要注册的EventLoop

    @Override
    public ChannelFuture register(Channel channel) {
        return next().register(channel);
    }

继续走几步，这里需要debug走，不然有点乱，走到这里停住，在AbstractChannel的内部类AbstractUnsafe中

        @Override
        public final void register(EventLoop eventLoop, final ChannelPromise promise) {
            if (eventLoop == null) {   //这些检查代码，不多说明
                throw new NullPointerException("eventLoop");
            }
            if (isRegistered()) {
                promise.setFailure(new IllegalStateException("registered to an event loop already"));
                return;
            }
            if (!isCompatible(eventLoop)) {
                promise.setFailure(
                        new IllegalStateException("incompatible event loop type: " + eventLoop.getClass().getName()));
                return;
            }

            AbstractChannel.this.eventLoop = eventLoop;

            if (eventLoop.inEventLoop()) {
                register0(promise);
            } else {
                try {
                    eventLoop.execute(new Runnable() {  //重点来了，线程开始了
                        @Override
                        public void run() {
                            register0(promise);
                        }
                    });
                } catch (Throwable t) {
                    logger.warn(
                            "Force-closing a channel whose registration task was not accepted by an event loop: {}",
                            AbstractChannel.this, t);
                    closeForcibly();
                    closeFuture.setClosed();
                    safeSetFailure(promise, t);
                }
            }
        }

当走到eventLoop.execute方法时，要进去execute方法看一下，回过头再来看上面的代码，这里开启其他线程了，不太容易调试了，两个线程都要关注。

execute方法在SingleThreadEventExecutor类中，是NioEventLoop的父类。

    @Override
    public void execute(Runnable task) {
        if (task == null) {
            throw new NullPointerException("task");
        }

        boolean inEventLoop = inEventLoop();
        if (inEventLoop) {
            addTask(task);
        } else {
            startThread();  //这里开启线程
            addTask(task);　//这里添加传过来的task到task队列，注意这里的task中是要执行一个register0(promise)方法的，注意上面的代码
            if (isShutdown() && removeTask(task)) {
                reject();
            }
        }

        if (!addTaskWakesUp && wakesUpForTask(task)) {
            wakeup(inEventLoop);
        }
    }

继续执行，到doStartThread()方法，

    private void doStartThread() {
        assert thread == null;
        executor.execute(new Runnable() {
            @Override
            public void run() {
                thread = Thread.currentThread();
                if (interrupted) {
                    thread.interrupt();
                }

                boolean success = false;
                updateLastExecutionTime();
                try {
                    SingleThreadEventExecutor.this.run(); //真正开始线程的
                    success = true;
                } catch (Throwable t) {
                    logger.warn("Unexpected exception from an event executor: ", t);
                } finally {
                    for (;;) {
                        int oldState = STATE_UPDATER.get(SingleThreadEventExecutor.this);
                        if (oldState >= ST_SHUTTING_DOWN || STATE_UPDATER.compareAndSet(
                                SingleThreadEventExecutor.this, oldState, ST_SHUTTING_DOWN)) {
                            break;
                        }
                    }

                    // Check if confirmShutdown() was called at the end of the loop.
                    if (success && gracefulShutdownStartTime == 0) {
                        logger.error("Buggy " + EventExecutor.class.getSimpleName() + " implementation; " +
                                SingleThreadEventExecutor.class.getSimpleName() + ".confirmShutdown() must be called " +
                                "before run() implementation terminates.");
                    }

                    try {
                        // Run all remaining tasks and shutdown hooks.
                        for (;;) {
                            if (confirmShutdown()) {
                                break;
                            }
                        }
                    } finally {
                        try {
                            cleanup();
                        } finally {
                            STATE_UPDATER.set(SingleThreadEventExecutor.this, ST_TERMINATED);
                            threadLock.release();
                            if (!taskQueue.isEmpty()) {
                                logger.warn(
                                        "An event executor terminated with " +
                                                "non-empty task queue (" + taskQueue.size() + ')');
                            }

                            terminationFuture.setSuccess(null);
                        }
                    }
                }
            }
        });
    }

进入SingleThreadEventExecutor.this.run()方法，走到下面代码。这里的代码就是监控channel和执行task，注意这时还没有channel被监控。实际上这里的task队列只有一个刚刚传进来的register0任务。

    @Override
    protected void run() {
        for (;;) {   //看见没，死循环！！！这个线程不错出不终止的话不会再出去了
            try {
                switch (selectStrategy.calculateStrategy(selectNowSupplier, hasTasks())) {
                    case SelectStrategy.CONTINUE:
                        continue;
                    case SelectStrategy.SELECT:
                        select(wakenUp.getAndSet(false));

                        // 'wakenUp.compareAndSet(false, true)' is always evaluated
                        // before calling 'selector.wakeup()' to reduce the wake-up
                        // overhead. (Selector.wakeup() is an expensive operation.)
                        //
                        // However, there is a race condition in this approach.
                        // The race condition is triggered when 'wakenUp' is set to
                        // true too early.
                        //
                        // 'wakenUp' is set to true too early if:
                        // 1) Selector is waken up between 'wakenUp.set(false)' and
                        //    'selector.select(...)'. (BAD)
                        // 2) Selector is waken up between 'selector.select(...)' and
                        //    'if (wakenUp.get()) { ... }'. (OK)
                        //
                        // In the first case, 'wakenUp' is set to true and the
                        // following 'selector.select(...)' will wake up immediately.
                        // Until 'wakenUp' is set to false again in the next round,
                        // 'wakenUp.compareAndSet(false, true)' will fail, and therefore
                        // any attempt to wake up the Selector will fail, too, causing
                        // the following 'selector.select(...)' call to block
                        // unnecessarily.
                        //
                        // To fix this problem, we wake up the selector again if wakenUp
                        // is true immediately after selector.select(...).
                        // It is inefficient in that it wakes up the selector for both
                        // the first case (BAD - wake-up required) and the second case
                        // (OK - no wake-up required).

                        if (wakenUp.get()) {
                            selector.wakeup();
                        }
                    default:
                        // fallthrough
                }

                cancelledKeys = 0;
                needsToSelectAgain = false;
                final int ioRatio = this.ioRatio;
                if (ioRatio == 100) {
                    try {
                        processSelectedKeys();
                    } finally {
                        // Ensure we always run tasks.
                        runAllTasks();
                    }
                } else {
                    final long ioStartTime = System.nanoTime();
                    try {
                        processSelectedKeys();
                    } finally {
                        // Ensure we always run tasks.
                        final long ioTime = System.nanoTime() - ioStartTime;
                        runAllTasks(ioTime * (100 - ioRatio) / ioRatio);   //这里会回调上面提到的提交的task，也就是register0(channel);
                    }
                }
            } catch (Throwable t) {
                handleLoopException(t);
            }
            // Always handle shutdown even if the loop processing threw an exception.
            try {
                if (isShuttingDown()) {
                    closeAll();
                    if (confirmShutdown()) {
                        return;
                    }
                }
            } catch (Throwable t) {
                handleLoopException(t);
            }
        }
    }

继续执行register0方法，进入doRegister()方法

        private void register0(ChannelPromise promise) {
            try {
                // check if the channel is still open as it could be closed in the mean time when the register
                // call was outside of the eventLoop
                if (!promise.setUncancellable() || !ensureOpen(promise)) {
                    return;
                }
                boolean firstRegistration = neverRegistered;
                doRegister();                 //执行注册
                neverRegistered = false;
                registered = true;

                // Ensure we call handlerAdded(...) before we actually notify the promise. This is needed as the
                // user may already fire events through the pipeline in the ChannelFutureListener.
                pipeline.invokeHandlerAddedIfNeeded();   //调用pipline中channelhandler的方法，这里要继续追下去

                safeSetSuccess(promise);
                pipeline.fireChannelRegistered();  //调用channehandler的ChannelRegister事件
                // Only fire a channelActive if the channel has never been registered. This prevents firing
                // multiple channel actives if the channel is deregistered and re-registered.
                if (isActive()) {
                    if (firstRegistration) {
                        pipeline.fireChannelActive();  //调用channelhandler的ChannelACtive事件，通过这里就能看出，通道是先注册后激活的
                    } else if (config().isAutoRead()) {
                        // This channel was registered before and autoRead() is set. This means we need to begin read
                        // again so that we process inbound data.
                        //
                        // See https://github.com/netty/netty/issues/4805
                        beginRead();
                    }
                }
            } catch (Throwable t) {
                // Close the channel directly to avoid FD leak.
                closeForcibly();
                closeFuture.setClosed();
                safeSetFailure(promise, t);
            }
        }

到selectionKey = javaChannel().register(eventLoop().selector, 0, this);才是真正的注册，这里涉及到nio知识，将包装的channel注册到一个selector，看到吧，nio的selector才是这正的灵魂

这是一个死循环，当注册成功后，会推出循环。

    @Override
    protected void doRegister() throws Exception {
        boolean selected = false;
        for (;;) {
            try {
                selectionKey = javaChannel().register(eventLoop().selector, 0, this);
                return;
            } catch (CancelledKeyException e) {
                if (!selected) {
                    // Force the Selector to select now as the "canceled" SelectionKey may still be
                    // cached and not removed because no Select.select(..) operation was called yet.
                    eventLoop().selectNow();
                    selected = true;
                } else {
                    // We forced a select operation on the selector before but the SelectionKey is still cached
                    // for whatever reason. JDK bug ?
                    throw e;
                }
            }
        }
    }

继续追pipeline.invokeHandlerAddedIfNeeded()方法，会进入下面代码，这里的task不是空的，为什么呢？

    private void callHandlerAddedForAllHandlers() {
        final PendingHandlerCallback pendingHandlerCallbackHead;
        synchronized (this) {
            assert !registered;

            // This Channel itself was registered.
            registered = true;

            pendingHandlerCallbackHead = this.pendingHandlerCallbackHead;
            // Null out so it can be GC'ed.
            this.pendingHandlerCallbackHead = null;
        }

        // This must happen outside of the synchronized(...) block as otherwise handlerAdded(...) may be called while
        // holding the lock and so produce a deadlock if handlerAdded(...) will try to add another handler from outside
        // the EventLoop.
        PendingHandlerCallback task = pendingHandlerCallbackHead;
        while (task != null) {
            task.execute();
            task = task.next;
        }
    }

记得在很远之前，我们在初始化通道的时候，在channelpipline中加了一个ChannelInitializer，这里会回调里面的initChanne方法，我在初始化那一节提到过，说“我还会回来的”，现在把当时的代码拿过来看一下

    @Override
    void init(Channel channel) throws Exception {
        final Map<ChannelOption<?>, Object> options = options0();
        synchronized (options) {
            channel.config().setOptions(options);
        }

        final Map<AttributeKey<?>, Object> attrs = attrs0();
        synchronized (attrs) {
            for (Entry<AttributeKey<?>, Object> e: attrs.entrySet()) {
                @SuppressWarnings("unchecked")
                AttributeKey<Object> key = (AttributeKey<Object>) e.getKey();
                channel.attr(key).set(e.getValue());
            }
        }

        ChannelPipeline p = channel.pipeline();

        final EventLoopGroup currentChildGroup = childGroup;
        final ChannelHandler currentChildHandler = childHandler;
        final Entry<ChannelOption<?>, Object>[] currentChildOptions;
        final Entry<AttributeKey<?>, Object>[] currentChildAttrs;
        synchronized (childOptions) {
            currentChildOptions = childOptions.entrySet().toArray(newOptionArray(childOptions.size()));
        }
        synchronized (childAttrs) {
            currentChildAttrs = childAttrs.entrySet().toArray(newAttrArray(childAttrs.size()));
        }


　　　　　//就是这里
        p.addLast(new ChannelInitializer<Channel>() {
            @Override
            public void initChannel(Channel ch) throws Exception {
                final ChannelPipeline pipeline = ch.pipeline();
                ChannelHandler handler = config.handler();
                if (handler != null) {
                    pipeline.addLast(handler);
                }

                // We add this handler via the EventLoop as the user may have used a ChannelInitializer as handler.
                // In this case the initChannel(...) method will only be called after this method returns. Because
                // of this we need to ensure we add our handler in a delayed fashion so all the users handler are
                // placed in front of the ServerBootstrapAcceptor.
                ch.eventLoop().execute(new Runnable() {
                    @Override
                    public void run() {
                        pipeline.addLast(new ServerBootstrapAcceptor(
                                currentChildGroup, currentChildHandler, currentChildOptions, currentChildAttrs));
                    }
                });
            }
        });
    }

会执行红色的代码，就是在channelpipline中加入一个ServerBootstrapAcceptor，他其实也是一个入站处理器，通过名字就能看出来，他就是客户端的socketchannel注册进来。

至此，服务器的NioServerSocketChannel的被注册完成，会对应ServerBootStrap下的一个EventLoop线程，该线程一直在监控当前channel的注册事件，当有新的NIoSocketChannel注册进来时，会被ServerBootstrapAcceptor处理器处理，下面来说处理的这个流程。