hbase-site.xml
<?xml version="1.0"?> <?xml-stylesheet type="text/xsl" href="configuration.xsl"?> <!-- /** * * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ --> <configuration> <property> <name>hbase.rootdir</name> <value>hdfs://10.0.192.30:9000/hbase</value> </property> <property> <name>hbase.cluster.distributed</name> <value>true</value> </property> <property> <name>hbase.zookeeper.property.clientPort</name> <value>2181</value> </property> <property> <name>hbase.zookeeper.quorum</name> <value>10.0.192.30</value> </property> <property> <name>zookeeper.session.timeout</name> <value>120000</value> </property> <property> <name>hbase.tmp.dir</name> <value>/data/hbase/tmp</value> </property> <property> <name>hbase.unsafe.stream.capability.enforce</name> <value>false</value> </property> <property> <name>phoenix.transactions.enabled</name> <value>true</value> </property> <property> <name>data.tx.snapshot.dir</name> <value>/tmp/tephra/snapshots</value> </property> <property> <name>data.tx.timeout</name> <value>6000</value> </property> </configuration>
hbase-env.sh
#!/usr/bin/env bash # #/** # * Licensed to the Apache Software Foundation (ASF) under one # * or more contributor license agreements. See the NOTICE file # * distributed with this work for additional information # * regarding copyright ownership. The ASF licenses this file # * to you under the Apache License, Version 2.0 (the # * "License"); you may not use this file except in compliance # * with the License. You may obtain a copy of the License at # * # * http://www.apache.org/licenses/LICENSE-2.0 # * # * Unless required by applicable law or agreed to in writing, software # * distributed under the License is distributed on an "AS IS" BASIS, # * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # * See the License for the specific language governing permissions and # * limitations under the License. # */ # Set environment variables here. # This script sets variables multiple times over the course of starting an hbase process, # so try to keep things idempotent unless you want to take an even deeper look # into the startup scripts (bin/hbase, etc.) # The java implementation to use. Java 1.8+ required. export JAVA_HOME=/opt/jdk1.8.0_192 # Extra Java CLASSPATH elements. Optional. export HBASE_CLASSPATH=/opt/hadoop-3.2.0/etc/hadoop # The maximum amount of heap to use. Default is left to JVM default. # export HBASE_HEAPSIZE=1G # Uncomment below if you intend to use off heap cache. For example, to allocate 8G of # offheap, set the value to "8G". # export HBASE_OFFHEAPSIZE=1G # Extra Java runtime options. # Below are what we set by default. May only work with SUN JVM. # For more on why as well as other possible settings, # see http://hbase.apache.org/book.html#performance export HBASE_OPTS="$HBASE_OPTS -XX:+UseConcMarkSweepGC" # Uncomment one of the below three options to enable java garbage collection logging for the server-side processes. # This enables basic gc logging to the .out file. # export SERVER_GC_OPTS="-verbose:gc -XX:+PrintGCDetails -XX:+PrintGCDateStamps" # This enables basic gc logging to its own file. # If FILE-PATH is not replaced, the log file(.gc) would still be generated in the HBASE_LOG_DIR . # export SERVER_GC_OPTS="-verbose:gc -XX:+PrintGCDetails -XX:+PrintGCDateStamps -Xloggc:<FILE-PATH>" # This enables basic GC logging to its own file with automatic log rolling. Only applies to jdk 1.6.0_34+ and 1.7.0_2+. # If FILE-PATH is not replaced, the log file(.gc) would still be generated in the HBASE_LOG_DIR . # export SERVER_GC_OPTS="-verbose:gc -XX:+PrintGCDetails -XX:+PrintGCDateStamps -Xloggc:<FILE-PATH> -XX:+UseGCLogFileRotation -XX:NumberOfGCLogFiles=1 -XX:GCLogFileSize=512M" # Uncomment one of the below three options to enable java garbage collection logging for the client processes. # This enables basic gc logging to the .out file. # export CLIENT_GC_OPTS="-verbose:gc -XX:+PrintGCDetails -XX:+PrintGCDateStamps" # This enables basic gc logging to its own file. # If FILE-PATH is not replaced, the log file(.gc) would still be generated in the HBASE_LOG_DIR . # export CLIENT_GC_OPTS="-verbose:gc -XX:+PrintGCDetails -XX:+PrintGCDateStamps -Xloggc:<FILE-PATH>" # This enables basic GC logging to its own file with automatic log rolling. Only applies to jdk 1.6.0_34+ and 1.7.0_2+. # If FILE-PATH is not replaced, the log file(.gc) would still be generated in the HBASE_LOG_DIR . # export CLIENT_GC_OPTS="-verbose:gc -XX:+PrintGCDetails -XX:+PrintGCDateStamps -Xloggc:<FILE-PATH> -XX:+UseGCLogFileRotation -XX:NumberOfGCLogFiles=1 -XX:GCLogFileSize=512M" # See the package documentation for org.apache.hadoop.hbase.io.hfile for other configurations # needed setting up off-heap block caching. # Uncomment and adjust to enable JMX exporting # See jmxremote.password and jmxremote.access in $JRE_HOME/lib/management to configure remote password access. # More details at: http://java.sun.com/javase/6/docs/technotes/guides/management/agent.html # NOTE: HBase provides an alternative JMX implementation to fix the random ports issue, please see JMX # section in HBase Reference Guide for instructions. # export HBASE_JMX_BASE="-Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false" # export HBASE_MASTER_OPTS="$HBASE_MASTER_OPTS $HBASE_JMX_BASE -Dcom.sun.management.jmxremote.port=10101" # export HBASE_REGIONSERVER_OPTS="$HBASE_REGIONSERVER_OPTS $HBASE_JMX_BASE -Dcom.sun.management.jmxremote.port=10102" # export HBASE_THRIFT_OPTS="$HBASE_THRIFT_OPTS $HBASE_JMX_BASE -Dcom.sun.management.jmxremote.port=10103" # export HBASE_ZOOKEEPER_OPTS="$HBASE_ZOOKEEPER_OPTS $HBASE_JMX_BASE -Dcom.sun.management.jmxremote.port=10104" # export HBASE_REST_OPTS="$HBASE_REST_OPTS $HBASE_JMX_BASE -Dcom.sun.management.jmxremote.port=10105" # File naming hosts on which HRegionServers will run. $HBASE_HOME/conf/regionservers by default. # export HBASE_REGIONSERVERS=${HBASE_HOME}/conf/regionservers # Uncomment and adjust to keep all the Region Server pages mapped to be memory resident #HBASE_REGIONSERVER_MLOCK=true #HBASE_REGIONSERVER_UID="hbase" # File naming hosts on which backup HMaster will run. $HBASE_HOME/conf/backup-masters by default. # export HBASE_BACKUP_MASTERS=${HBASE_HOME}/conf/backup-masters # Extra ssh options. Empty by default. # export HBASE_SSH_OPTS="-o ConnectTimeout=1 -o SendEnv=HBASE_CONF_DIR" # Where log files are stored. $HBASE_HOME/logs by default. # export HBASE_LOG_DIR=${HBASE_HOME}/logs # Enable remote JDWP debugging of major HBase processes. Meant for Core Developers # export HBASE_MASTER_OPTS="$HBASE_MASTER_OPTS -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=8070" # export HBASE_REGIONSERVER_OPTS="$HBASE_REGIONSERVER_OPTS -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=8071" # export HBASE_THRIFT_OPTS="$HBASE_THRIFT_OPTS -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=8072" # export HBASE_ZOOKEEPER_OPTS="$HBASE_ZOOKEEPER_OPTS -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=8073" # export HBASE_REST_OPTS="$HBASE_REST_OPTS -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=8074" # A string representing this instance of hbase. $USER by default. # export HBASE_IDENT_STRING=$USER # The scheduling priority for daemon processes. See 'man nice'. # export HBASE_NICENESS=10 # The directory where pid files are stored. /tmp by default. # export HBASE_PID_DIR=/var/hadoop/pids # Seconds to sleep between slave commands. Unset by default. This # can be useful in large clusters, where, e.g., slave rsyncs can # otherwise arrive faster than the master can service them. # export HBASE_SLAVE_SLEEP=0.1 # Tell HBase whether it should manage it's own instance of ZooKeeper or not. export HBASE_MANAGES_ZK=false # The default log rolling policy is RFA, where the log file is rolled as per the size defined for the # RFA appender. Please refer to the log4j.properties file to see more details on this appender. # In case one needs to do log rolling on a date change, one should set the environment property # HBASE_ROOT_LOGGER to "<DESIRED_LOG LEVEL>,DRFA". # For example: # HBASE_ROOT_LOGGER=INFO,DRFA # The reason for changing default to RFA is to avoid the boundary case of filling out disk space as # DRFA doesn't put any cap on the log size. Please refer to HBase-5655 for more context. # Tell HBase whether it should include Hadoop's lib when start up, # the default value is false,means that includes Hadoop's lib. # export HBASE_DISABLE_HADOOP_CLASSPATH_LOOKUP="true"