zoukankan      html  css  js  c++  java
  • Eth-Trunk配置-手动模式

    手工模式

    SW1配置:


    [SW1]interface et
    [SW1]interface Eth-Trunk 10 #设置trunk虚拟端口
    [SW1-Eth-Trunk10]trunkport gi
    [SW1-Eth-Trunk10]trunkport GigabitEthernet 0/0/1 to 0/0/3 #将1-3物理端口加入trunk虚拟端口
    Info: This operation may take a few seconds. Please wait for a moment...done.
    [SW1-Eth-Trunk10]
    Oct 30 2020 01:48:44-08:00 SW1 %%01IFNET/4/IF_STATE(l)[0]:Interface Eth-Trunk10
    has turned into UP state.
    Oct 30 2020 01:48:45-08:00 SW1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
    .191.3.1 configurations have been changed. The current change number is 5, the c
    hange loop count is 0, and the maximum number of records is 4095.
    [SW1-Eth-Trunk10]q
    [SW1]dis eth-trunk 10 #查看trunk配置
    Eth-Trunk10's state information is:
    WorkingMode: NORMAL Hash arithmetic: According to SIP-XOR-DIP
    Least Active-linknumber: 1 Max Bandwidth-affected-linknumber: 8
    Operate status: up Number Of Up Port In Trunk: 3
    --------------------------------------------------------------------------------
    PortName Status Weight
    GigabitEthernet0/0/1 Up 1       #手动配置的端口自动up,不管对端有没有up
    GigabitEthernet0/0/2 Up 1
    GigabitEthernet0/0/3 Up 1

    SW2配置:

    <Huawei>sys
    Enter system view, return user view with Ctrl+Z.
    [Huawei]sys SW2    #命名SW2
    [SW2]int
    [SW2]interface et
    [SW2]interface Eth-Trunk
    Oct 30 2020 01:59:17-08:00 SW2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
    .191.3.1 configurations have been changed. The current change number is 4, the c
    hange loop count is 0, and the maximum number of records is 409
    ^
    Error:Incomplete command found at '^' position.
    [SW2]interface Eth-Trun
    [SW2]interface Eth-Trunk 12    #创建trunk12端口
    [SW2-Eth-Trunk12]int g 0/0/1    #切换至0/0/1端口
    [SW2-GigabitEthernet0/0/1]et
    [SW2-GigabitEthernet0/0/1]eth-trunk 12  #在0/0/1端口直接输入eth-trunk 12就加入了trunk口
    Info: This operation may take a few seconds. Please wait for a moment...
    Oct 30 2020 02:00:08-08:00 SW2 %%01IFNET/4/IF_STATE(l)[0]:Interface Eth-Trunk12
    has turned into UP state.done.
    [SW2-GigabitEthernet0/0/1]int g 0/0
    Oct 30 2020 02:00:17-08:00 SW2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
    .191.3.1 configurations have been changed. The current change number is 5, the c
    hange loop count is 0, and the maximum number of records is 4095.
    ^
    Error: Unrecognized command found at '^' position.
    [SW2-GigabitEthernet0/0/1]int g 0/0/2
    [SW2-GigabitEthernet0/0/2]et
    [SW2-GigabitEthernet0/0/2]eth-trunk 12
    Info: This operation may take a few seconds. Please wait for a moment...done.
    [SW2-GigabitEthernet0/0/2]int g 0/0/
    Oct 30 2020 02:00:47-08:00 SW2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
    .191.3.1 configurations have been changed. The current change number is 6, the c
    hange loop count is 0, and the maximum number of record
    [SW2-GigabitEthernet0/0/2]
    [SW2-GigabitEthernet0/0/2]int g 0/0/3
    [SW2-GigabitEthernet0/0/3]et
    [SW2-GigabitEthernet0/0/3]eth-trunk 12
    Info: This operation may take a few seconds. Please wait for a moment...done.
    [SW2-GigabitEthernet0/0/3]
    Oct 30 2020 02:01:17-08:00 SW2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
    .191.3.1 configurations have been changed. The current change number is 7, the c
    hange loop count is 0, and the maximum number of records is 4095.
    [SW2-GigabitEthernet0/0/3]q     
    [SW2]dis et
    [SW2]dis eth-trunk 12      #查看trunk口配置
    Eth-Trunk12's state information is:
    WorkingMode: NORMAL Hash arithmetic: According to SIP-XOR-DIP
    Least Active-linknumber: 1 Max Bandwidth-affected-linknumber: 8
    Operate status: up Number Of Up Port In Trunk: 3
    --------------------------------------------------------------------------------
    PortName Status Weight
    GigabitEthernet0/0/1 Up 1     #自动up 权重默认为1
    GigabitEthernet0/0/2 Up 1
    GigabitEthernet0/0/3 Up 1

    --------------------------------------------------------------------------------------------------------------------

    shutdown一个端口测试

    [SW1-GigabitEthernet0/0/1]shu
    [SW1-GigabitEthernet0/0/1]shutdown
    [SW1-GigabitEthernet0/0/1]
    Oct 30 2020 02:17:45-08:00 SW1 %%01PHY/1/PHY(l)[0]: GigabitEthernet0/0/1: cha
    nge status to down
    Oct 30 2020 02:17:46-08:00 SW1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25
    .191.3.1 configurations have been changed. The current change number is 6, the c
    hange loop count is 0, and the maximum number of records is 4095.
    [SW1-GigabitEthernet0/0/1]dis eth 10
    Eth-Trunk10's state information is:
    WorkingMode: NORMAL Hash arithmetic: According to SIP-XOR-DIP
    Least Active-linknumber: 1 Max Bandwidth-affected-linknumber: 8
    Operate status: up Number Of Up Port In Trunk: 2
    --------------------------------------------------------------------------------
    PortName Status Weight
    GigabitEthernet0/0/1 Down 1
    GigabitEthernet0/0/2 Up 1
    GigabitEthernet0/0/3 Up 1

    <SW2>dis eth 12
    Eth-Trunk12's state information is:
    WorkingMode: NORMAL Hash arithmetic: According to SIP-XOR-DIP
    Least Active-linknumber: 1 Max Bandwidth-affected-linknumber: 8
    Operate status: up Number Of Up Port In Trunk: 2
    --------------------------------------------------------------------------------
    PortName Status Weight
    GigabitEthernet0/0/1 Down 1
    GigabitEthernet0/0/2 Up 1
    GigabitEthernet0/0/3 Up 1

     关闭eth-trunk

    进入端口 undo eth-trunk

     

  • 相关阅读:
    取得窗口大小和窗口位置兼容所有浏览器的js代码
    一个简单易用的导出Excel类
    如何快速启动chrome插件
    网页表单设计案例
    Ubuntu下的打包解包
    The source file is different from when the module was built. Would you like the debugger to use it anyway?
    FFisher分布
    kalman filter
    Group delay Matlab simulate
    24位位图格式解析
  • 原文地址:https://www.cnblogs.com/coolruo/p/13900115.html
Copyright © 2011-2022 走看看