Noxim - the NoC Simulator that is implemented by SystemC
第一步：
C++ compiler installation
第二步：
YAML installation
1 The name of the package depends on the Unix version you are using.
2
3 On Ubuntu 14.04, for example, it is possible to install yaml (and the required boost
4 libraries) with:
5
6 sudo apt-get install libyaml-cpp-dev libboost-dev
7
8 If the packet libyaml-cpp-dev is not available just build yaml-cpp:
9 Prerequisites:
10 - CMake
11 sudo apt-get install cmake
12
13 - Boost libs
14 sudo apt-get install libboost-dev
15
16 Then download the code at https://github.com/jbeder/yaml-cpp/archive/master.zip
17 and execute the folloqing commands:
18
19 unzip yaml-cpp-master.zip
20 mv yaml-cpp-master yaml-cpp
21 cd yaml-cpp
22 mkdir lib
23 cd lib
24 cmake ..
25 make
26 sudo make install
27
28
29 On MacOSX, when using macports, just type:
30
31 sudo port install yaml-cpp
32
33 Please also set properly the YAML path in the Makefile, as follows:
34 YAML := /opt/local/
第三步：
SystemC installation
1 - Download SystemC (currently at version 2.3.1) from
2 http://www.accellera.org/downloads/standards/systemc (a free registration is required).
3 - Unpack it:
4 tar -xzf systemc-2.3.1.tgz
5
6 - Enter the newly created directory and refer to the file INSTALL which details all the steps
7 required for building. Basically they are:
8
9 mkdir objdir
10 cd objdir
11 export CXX=g++
12 ../configure
13 make
14 make install
15 cd ..
16 rm -rf objdir
17
18 Once you have installed SystemC correctly, you may then jump to the next step.
第四步：
Build Noxim
If SystemC is installed correctly, then you just have to compile Noxim. 1) Extract the source files and go to the "bin" directory. 2) In that directory edit the file Makefile to modify "SYSTEMC" and "YAML" environment variables according to your installation paths. Please, note that the values already set in the Makefile should be fine if you are using Ubuntu 3) Just run "make". [cp@Server203 bin]$ export LD_LIBRARY_PATH=/home/cp/SystemC/systemc-2.3.1a/lib-linux64 （非常重要，
当路径改变的时候都要运行一下，防止systemc-2.3.1.so库在当前工程文件外面。）
解决问题：./noxim: error while loading shared libraries: libsystemc-2.3.1.so: cannot open shared object file: No such file or directory
You may ignore warning messages (if any), so if you don't get any error you are ready to run Noxim for the first time using the command: ./noxim -config ../config_examples/default_config.yaml If everything works fine, it is now safe for you to copy or move this executable elsewhere; if you are a maniac of cleaning please note that "make clean" will also delete the executable... so move it before cleaning! That's all, folks!