Solaris10配置iscsi initiator

存储采用openfiler，已经配置好lun。

openfiler配置信息表

配置项	取值
IP地址	10.0.22.1
target	iqn.2006-01.com.openfiler:tsn.9a0dc3413c15

主机端采用静态配置target的方式。

设置initiator别名

此步骤不是必须的。

root@test2 # iscsiadm modify initiator-node -A test2
root@test2 # iscsiadm list initiator-node
Initiator node name: iqn.1986-03.com.sun:01:eacfccf7ffff.50403c2b
Initiator node alias: test2
        Login Parameters (Default/Configured):
                Header Digest: NONE/-
                Data Digest: NONE/-
        Authentication Type: NONE
        RADIUS Server: NONE
        RADIUS access: unknown
        Tunable Parameters (Default/Configured):
                Session Login Response Time: 60/-
                Maximum Connection Retry Time: 180/-
                Login Retry Time Interval: 60/-
        Configured Sessions: 1

增加静态配置target

root@test2 # iscsiadm add static-config iqn.2006-01.com.openfiler:tsn.9a0dc3413c15,10.0.22.1
root@test2 # iscsiadm list static-config
Static Configuration Target: iqn.2006-01.com.openfiler:tsn.9a0dc3413c15,10.0.22.1:3260

修改discovery，启用static配置

root@test2 # iscsiadm list discovery
Discovery:
        Static: disabled
        Send Targets: disabled
        iSNS: disabled
root@test2 # iscsiadm modify discovery -s enable
root@test2 # iscsiadm list discovery
Discovery:
        Static: enabled
        Send Targets: disabled
        iSNS: disabled

让solaris扫描iscsi设备

root@test2 # devfsadm -c iscisi
root@test2 # format
Searching for disks...done

AVAILABLE DISK SELECTIONS:
       0. c1t0d0 <DEFAULT cyl 4174 alt 2 hd 255 sec 63>
          /pci@0,0/pci15ad,1976@10/sd@0,0
       1. c3t2d0 <DEFAULT cyl 2045 alt 2 hd 128 sec 32>
         /iscsi/disk@0000iqn.2006-01.com.openfiler%3Atsn.9a0dc3413c150001,0
       2. c3t3d0 <DEFAULT cyl 2045 alt 2 hd 128 sec 32>
         /iscsi/disk@0000iqn.2006-01.com.openfiler%3Atsn.9a0dc3413c150001,1