zoukankan      html  css  js  c++  java
  • 网卡命名

    /* SPDX-License-Identifier: LGPL-2.1+ */

    /*
    * Predictable network interface device names based on:
    * - firmware/bios-provided index numbers for on-board devices
    * - firmware-provided pci-express hotplug slot index number
    * - physical/geographical location of the hardware
    * - the interface's MAC address
    *
    * http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
    *
    * Two character prefixes based on the type of interface:
    * en — Ethernet
    * ib — InfiniBand
    * sl — serial line IP (slip)
    * wl — wlan
    * ww — wwan
    *
    * Type of names:
    * b<number> — BCMA bus core number
    * c<bus_id> — bus id of a grouped CCW or CCW device,
    * with all leading zeros stripped [s390]
    * o<index>[n<phys_port_name>|d<dev_port>]
    * — on-board device index number
    * s<slot>[f<function>][n<phys_port_name>|d<dev_port>]
    * — hotplug slot index number
    * x<MAC> — MAC address
    * [P<domain>]p<bus>s<slot>[f<function>][n<phys_port_name>|d<dev_port>]
    * — PCI geographical location
    * [P<domain>]p<bus>s<slot>[f<function>][u<port>][..][c<config>][i<interface>]
    * — USB port number chain
    * v<slot> - VIO slot number (IBM PowerVM)
    * a<vendor><model>i<instance> — Platform bus ACPI instance id
    *
    * All multi-function PCI devices will carry the [f<function>] number in the
    * device name, including the function 0 device.
    *
    * SR-IOV virtual devices are named based on the name of the parent interface,
    * with a suffix of "v<N>", where <N> is the virtual device number.
    *
    * When using PCI geography, The PCI domain is only prepended when it is not 0.
    *
    * For USB devices the full chain of port numbers of hubs is composed. If the
    * name gets longer than the maximum number of 15 characters, the name is not
    * exported.
    * The usual USB configuration == 1 and interface == 0 values are suppressed.
    *
    * PCI Ethernet card with firmware index "1":
    * ID_NET_NAME_ONBOARD=eno1
    * ID_NET_NAME_ONBOARD_LABEL=Ethernet Port 1
    *
    * PCI Ethernet card in hotplug slot with firmware index number:
    * /sys/devices/pci0000:00/0000:00:1c.3/0000:05:00.0/net/ens1
    * ID_NET_NAME_MAC=enx000000000466
    * ID_NET_NAME_PATH=enp5s0
    * ID_NET_NAME_SLOT=ens1
    *
    * PCI Ethernet multi-function card with 2 ports:
    * /sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/net/enp2s0f0
    * ID_NET_NAME_MAC=enx78e7d1ea46da
    * ID_NET_NAME_PATH=enp2s0f0
    * /sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.1/net/enp2s0f1
    * ID_NET_NAME_MAC=enx78e7d1ea46dc
    * ID_NET_NAME_PATH=enp2s0f1
    *
    * PCI wlan card:
    * /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/net/wlp3s0
    * ID_NET_NAME_MAC=wlx0024d7e31130
    * ID_NET_NAME_PATH=wlp3s0
    *
    * PCI IB host adapter with 2 ports:
    * /sys/devices/pci0000:00/0000:00:03.0/0000:15:00.0/net/ibp21s0f0
    * ID_NET_NAME_PATH=ibp21s0f0
    * /sys/devices/pci0000:00/0000:00:03.0/0000:15:00.1/net/ibp21s0f1
    * ID_NET_NAME_PATH=ibp21s0f1
    *
    * USB built-in 3G modem:
    * /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.6/net/wwp0s29u1u4i6
    * ID_NET_NAME_MAC=wwx028037ec0200
    * ID_NET_NAME_PATH=wwp0s29u1u4i6
    *
    * USB Android phone:
    * /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/net/enp0s29u1u2
    * ID_NET_NAME_MAC=enxd626b3450fb5
    * ID_NET_NAME_PATH=enp0s29u1u2
    *
    * s390 grouped CCW interface:
    * /sys/devices/css0/0.0.0007/0.0.f5f0/group_device/net/encf5f0
    * ID_NET_NAME_MAC=enx026d3c00000a
    * ID_NET_NAME_PATH=encf5f0
    */

    https://github.com/systemd/systemd/blob/master/src/udev/udev-builtin-net_id.c#L20

    https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames/


    上面一段是systemd源码的注释


    p3s0代表PCI接口的物理位置为(3, 0), 其中横坐标代表bus,纵坐标代表slot


    [root@ka1che225 ~]# rpm -qa|grep biosdev
    biosdevname-0.7.2-2.el7.x86_64
    [root@ka1che225 ~]# rpm -ql biosdevname
    /usr/lib/udev/rules.d/71-biosdevname.rules
    /usr/sbin/biosdevname
    /usr/share/doc/biosdevname-0.7.2
    /usr/share/doc/biosdevname-0.7.2/COPYING
    /usr/share/doc/biosdevname-0.7.2/README
    /usr/share/man/man1/biosdevname.1.gz


    [root@ali-1 ~]# ip addr
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
    valid_lft forever preferred_lft forever
    2: enp50s0f 0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond2 portid 0894ef73ea6e state UP qlen 1000
    link/ether 08:94:ef:73:ea:6e brd ff:ff:ff:ff:ff:ff
    3: enp50s0f 1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq portid 0894ef73ea6f state UP qlen 1000
    link/ether 08:94:ef:73:ea:6f brd ff:ff:ff:ff:ff:ff
    inet6 fe80::a94:efff:fe73:ea6f/64 scope link
    valid_lft forever preferred_lft forever
    4: enp50s0f 2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq portid 0894ef73ea70 state DOWN qlen 1000
    link/ether 08:94:ef:73:ea:70 brd ff:ff:ff:ff:ff:ff
    5: enp28s0f 0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000
    link/ether 90:e2:ba:88:f0:a4 brd ff:ff:ff:ff:ff:ff
    6: enp50s0f 3: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq portid 0894ef73ea71 state DOWN qlen 1000
    link/ether 08:94:ef:73:ea:71 brd ff:ff:ff:ff:ff:ff
    7: enp28s0f 1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond1 state UP qlen 1000
    link/ether 90:e2:ba:88:f0:a5 brd ff:ff:ff:ff:ff:ff
    8: enp46s0f 0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000
    link/ether 90:e2:ba:88:f0:a4 brd ff:ff:ff:ff:ff:ff
    9: enp46s0f 1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond1 state UP qlen 1000
    link/ether 90:e2:ba:88:f0:a5 brd ff:ff:ff:ff:ff:ff

  • 相关阅读:
    jQury+Ajax与C#后台交换数据
    loadrunner 测试问题汇总
    Loadrunner脚本学习总结
    sar命令详解
    用sar进行CPU利用率的分析
    centos7-sar工具的安装过程及其简单应用
    shell if [ -d filename]
    shell脚本自带变量的含义
    Sublime Text2使用规则
    selenium grid结构图
  • 原文地址:https://www.cnblogs.com/createyuan/p/10601175.html
Copyright © 2011-2022 走看看