zoukankan      html  css  js  c++  java

  • Flume1.5.0入门：安装、部署、及flume的案例

    转自：http://www.aboutyun.com/thread-8917-1-1.html

    问题导读
    1.什么是flume
    2.flume的官方网站在哪里？
    3.flume有哪些术语？
    4.如何配置flume数据源码？






    　　一、什么是Flume?
    　　flume 作为 cloudera 开发的实时日志收集系统，受到了业界的认可与广泛应用。Flume 初始的发行版本目前被统称为 Flume OG（original generation），属于 cloudera。但随着 FLume 功能的扩展，Flume OG 代码工程臃肿、核心组件设计不合理、核心配置不标准等缺点暴露出来，尤其是在 Flume OG 的最后一个发行版本 0.94.0 中，日志传输不稳定的现象尤为严重，为了解决这些问题，2011 年 10 月 22 号，cloudera 完成了 Flume-728，对 Flume 进行了里程碑式的改动：重构核心组件、核心配置以及代码架构，重构后的版本统称为 Flume NG（next generation）；改动的另一原因是将 Flume 纳入 apache 旗下，cloudera Flume 改名为 Apache Flume。

            flume的特点：
    　　flume是一个分布式、可靠、和高可用的海量日志采集、聚合和传输的系统。支持在日志系统中定制各类数据发送方，用于收集数据;同时，Flume提供对数据进行简单处理，并写到各种数据接受方(比如文本、HDFS、Hbase等)的能力 。
    　　flume的数据流由事件(Event)贯穿始终。事件是Flume的基本数据单位，它携带日志数据(字节数组形式)并且携带有头信息，这些Event由Agent外部的Source生成，当Source捕获事件后会进行特定的格式化，然后Source会把事件推入(单个或多个)Channel中。你可以把Channel看作是一个缓冲区，它将保存事件直到Sink处理完该事件。Sink负责持久化日志或者把事件推向另一个Source。

            flume的可靠性 
    　　当节点出现故障时，日志能够被传送到其他节点上而不会丢失。Flume提供了三种级别的可靠性保障，从强到弱依次分别为：end-to-end（收到数据agent首先将event写到磁盘上，当数据传送成功后，再删除；如果数据发送失败，可以重新发送。），Store on failure（这也是scribe采用的策略，当数据接收方crash时，将数据写到本地，待恢复后，继续发送），Besteffort（数据发送到接收方后，不会进行确认）。

            flume的可恢复性：
    　　还是靠Channel。推荐使用FileChannel，事件持久化在本地文件系统里(性能较差)。 

    　　flume的一些核心概念：

    • Agent        使用JVM 运行Flume。每台机器运行一个agent，但是可以在一个agent中包含多个sources和sinks。
    • Client        生产数据，运行在一个独立的线程。
    • Source        从Client收集数据，传递给Channel。
    • Sink        从Channel收集数据，运行在一个独立线程。
    • Channel        连接 sources 和 sinks ，这个有点像一个队列。
    • Events        可以是日志记录、 avro 对象等。



    　　Flume以agent为最小的独立运行单位。一个agent就是一个JVM。单agent由Source、Sink和Channel三大组件构成，如下图：

    <ignore_js_op> 


    　　值得注意的是，Flume提供了大量内置的Source、Channel和Sink类型。不同类型的Source,Channel和Sink可以自由组合。组合方式基于用户设置的配置文件，非常灵活。比如：Channel可以把事件暂存在内存里，也可以持久化到本地硬盘上。Sink可以把日志写入HDFS, HBase，甚至是另外一个Source等等。Flume支持用户建立多级流，也就是说，多个agent可以协同工作，并且支持Fan-in、Fan-out、Contextual Routing、Backup Routes，这也正是NB之处。如下图所示:

    <ignore_js_op> 



    　　二、flume的官方网站在哪里？
    　　http://flume.apache.org/

    　　三、在哪里下载？
    　　http://www.apache.org/dyn/closer.cgi/flume/1.5.0/apache-flume-1.5.0-bin.tar.gz

    　　四、如何安装？
    　　　　1)将下载的flume包，解压到/home/hadoop目录中，你就已经完成了50%：）简单吧
    　　　　2)修改 flume-env.sh 配置文件,主要是JAVA_HOME变量设置

    1. root@m1:/home/hadoop/flume-1.5.0-bin# cp conf/flume-env.sh.template conf/flume-env.sh
    2. root@m1:/home/hadoop/flume-1.5.0-bin# vi conf/flume-env.sh
    3. # Licensed to the Apache Software Foundation (ASF) under one
    4. # or more contributor license agreements.  See the NOTICE file
    5. # distributed with this work for additional information
    6. # regarding copyright ownership.  The ASF licenses this file
    7. # to you under the Apache License, Version 2.0 (the
    8. # "License"); you may not use this file except in compliance
    9. # with the License.  You may obtain a copy of the License at
    10. #
    11. #     http://www.apache.org/licenses/LICENSE-2.0
    12. #
    13. # Unless required by applicable law or agreed to in writing, software
    14. # distributed under the License is distributed on an "AS IS" BASIS,
    15. # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    16. # See the License for the specific language governing permissions and
    17. # limitations under the License.
    19. # If this file is placed at FLUME_CONF_DIR/flume-env.sh, it will be sourced
    20. # during Flume startup.
    22. # Enviroment variables can be set here.
    24. JAVA_HOME=/usr/lib/jvm/java-7-oracle
    26. # Give Flume more memory and pre-allocate, enable remote monitoring via JMX
    27. #JAVA_OPTS="-Xms100m -Xmx200m -Dcom.sun.management.jmxremote"
    29. # Note that the Flume conf directory is always included in the classpath.
    30. #FLUME_CLASSPATH=""
    复制代码


                  3)验证是否安装成功

    1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng version
    2. Flume 1.5.0
    3. Source code repository: https://git-wip-us.apache.org/repos/asf/flume.git
    4. Revision: 8633220df808c4cd0c13d1cf0320454a94f1ea97
    5. Compiled by hshreedharan on Wed May  7 14:49:18 PDT 2014
    6. From source with checksum a01fe726e4380ba0c9f7a7d222db961f
    7. root@m1:/home/hadoop#
    复制代码

    　　　　出现上面的信息，表示安装成功了


    　　五、flume的案例
    　　　　1)案例1：Avro
    　　　　Avro可以发送一个给定的文件给Flume，Avro 源使用AVRO RPC机制。
    　　　　　　a)创建agent配置文件

    1. root@m1:/home/hadoop#vi /home/hadoop/flume-1.5.0-bin/conf/avro.conf
    3. a1.sources = r1
    4. a1.sinks = k1
    5. a1.channels = c1
    7. # Describe/configure the source
    8. a1.sources.r1.type = avro
    9. a1.sources.r1.channels = c1
    10. a1.sources.r1.bind = 0.0.0.0
    11. a1.sources.r1.port = 4141
    13. # Describe the sink
    14. a1.sinks.k1.type = logger
    16. # Use a channel which buffers events in memory
    17. a1.channels.c1.type = memory
    18. a1.channels.c1.capacity = 1000
    19. a1.channels.c1.transactionCapacity = 100
    21. # Bind the source and sink to the channel
    22. a1.sources.r1.channels = c1
    23. a1.sinks.k1.channel = c1
    复制代码




    　　　　　　b)启动flume agent a1

    1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/avro.conf -n a1 -Dflume.root.logger=INFO,console
    复制代码


    　　　　　　c)创建指定文件

    1. root@m1:/home/hadoop# echo "hello world" > /home/hadoop/flume-1.5.0-bin/log.00
    复制代码


    　　　　　　d)使用avro-client发送文件

    1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng avro-client -c . -H m1 -p 4141 -F /home/hadoop/flume-1.5.0-bin/log.00
    复制代码


    　　　　　　d)使用avro-client发送文件


    1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng avro-client -c . -H m1 -p 4141 -F /
    复制代码


    　　　　　　f)在m1的控制台，可以看到以下信息，注意最后一行：


    1. root@m1:/home/hadoop/flume-1.5.0-bin/conf# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/avro.conf -n a1 -Dflume.root.logger=INFO,console
    2. Info: Sourcing environment configuration script /home/hadoop/flume-1.5.0-bin/conf/flume-env.sh
    3. Info: Including Hadoop libraries found via (/home/hadoop/hadoop-2.2.0/bin/hadoop) for HDFS access
    4. Info: Excluding /home/hadoop/hadoop-2.2.0/share/hadoop/common/lib/slf4j-api-1.7.5.jar from classpath
    5. Info: Excluding /home/hadoop/hadoop-2.2.0/share/hadoop/common/lib/slf4j-log4j12-1.7.5.jar from classpath
    6. ...
    7. 2014-08-10 10:43:25,112 (New I/O  worker #1) [INFO - org.apache.avro.ipc.NettyServer$NettyServerAvroHandler.handleUpstream(NettyServer.java:171)] [id: 0x92464c4f, /192.168.1.50:59850 :> /192.168.1.50:4141] UNBOUND
    8. 2014-08-10 10:43:25,112 (New I/O  worker #1) [INFO - org.apache.avro.ipc.NettyServer$NettyServerAvroHandler.handleUpstream(NettyServer.java:171)] [id: 0x92464c4f, /192.168.1.50:59850 :> /192.168.1.50:4141] CLOSED
    9. 2014-08-10 10:43:25,112 (New I/O  worker #1) [INFO - org.apache.avro.ipc.NettyServer$NettyServerAvroHandler.channelClosed(NettyServer.java:209)] Connection to /192.168.1.50:59850 disconnected.
    10. 2014-08-10 10:43:26,718 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 68 65 6C 6C 6F 20 77 6F 72 6C 64                hello world }
    复制代码



    　　　　2)案例2：Spool
    　　　　Spool监测配置的目录下新增的文件，并将文件中的数据读取出来。需要注意两点：
    　　　　1) 拷贝到spool目录下的文件不可以再打开编辑。
    　　　　2) spool目录下不可包含相应的子目录


    　　　　　　a)创建agent配置文件

    1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/spool.conf
    3. a1.sources = r1
    4. a1.sinks = k1
    5. a1.channels = c1
    7. # Describe/configure the source
    8. a1.sources.r1.type = spooldir
    9. a1.sources.r1.channels = c1
    10. a1.sources.r1.spoolDir = /home/hadoop/flume-1.5.0-bin/logs
    11. a1.sources.r1.fileHeader = true
    13. # Describe the sink
    14. a1.sinks.k1.type = logger
    16. # Use a channel which buffers events in memory
    17. a1.channels.c1.type = memory
    18. a1.channels.c1.capacity = 1000
    19. a1.channels.c1.transactionCapacity = 100
    21. # Bind the source and sink to the channel
    22. a1.sources.r1.channels = c1
    23. a1.sinks.k1.channel = c1
    复制代码


    　　　　　　b)启动flume agent a1

    1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/spool.conf -n a1 -Dflume.root.logger=INFO,console
    复制代码


    　　　　　　c)追加文件到/home/hadoop/flume-1.5.0-bin/logs目录

    1. root@m1:/home/hadoop# echo "spool test1" > /home/hadoop/flume-1.5.0-bin/logs/spool_text.log
    复制代码


    　　　　　d)在m1的控制台，可以看到以下相关信息：

    1. 14/08/10 11:37:13 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
    2. 14/08/10 11:37:13 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
    3. 14/08/10 11:37:14 INFO avro.ReliableSpoolingFileEventReader: Preparing to move file /home/hadoop/flume-1.5.0-bin/logs/spool_text.log to /home/hadoop/flume-1.5.0-bin/logs/spool_text.log.COMPLETED
    4. 14/08/10 11:37:14 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
    5. 14/08/10 11:37:14 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
    6. 14/08/10 11:37:14 INFO sink.LoggerSink: Event: { headers:{file=/home/hadoop/flume-1.5.0-bin/logs/spool_text.log} body: 73 70 6F 6F 6C 20 74 65 73 74 31                spool test1 }
    7. 14/08/10 11:37:15 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
    8. 14/08/10 11:37:15 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
    9. 14/08/10 11:37:16 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
    10. 14/08/10 11:37:16 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
    11. 14/08/10 11:37:17 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
    复制代码




    　　　　3)案例3：Exec
    　　　　EXEC执行一个给定的命令获得输出的源,如果要使用tail命令，必选使得file足够大才能看到输出内容

    　　　　　　a)创建agent配置文件

    1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/exec_tail.conf
    3. a1.sources = r1
    4. a1.sinks = k1
    5. a1.channels = c1
    7. # Describe/configure the source
    8. a1.sources.r1.type = exec
    9. a1.sources.r1.channels = c1
    10. a1.sources.r1.command = tail -F /home/hadoop/flume-1.5.0-bin/log_exec_tail
    12. # Describe the sink
    13. a1.sinks.k1.type = logger
    15. # Use a channel which buffers events in memory
    16. a1.channels.c1.type = memory
    17. a1.channels.c1.capacity = 1000
    18. a1.channels.c1.transactionCapacity = 100
    20. # Bind the source and sink to the channel
    21. a1.sources.r1.channels = c1
    22. a1.sinks.k1.channel = c1
    复制代码


    　　　　　　b)启动flume agent a1

    1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/exec_tail.conf -n a1 -Dflume.root.logger=INFO,console
    复制代码


    　　　　　　c)生成足够多的内容在文件里

    1. root@m1:/home/hadoop# for i in {1..100};do echo "exec tail$i" >> /home/hadoop/flume-1.5.0-bin/log_
    复制代码


    　　　　　　e)在m1的控制台，可以看到以下信息：

    1. 2014-08-10 10:59:25,513 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 20 74 65 73 74       exec tail test }
    2. 2014-08-10 10:59:34,535 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 20 74 65 73 74       exec tail test }
    3. 2014-08-10 11:01:40,557 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 31                   exec tail1 }
    4. 2014-08-10 11:01:41,180 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 32                   exec tail2 }
    5. 2014-08-10 11:01:41,180 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 33                   exec tail3 }
    6. 2014-08-10 11:01:41,181 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 34                   exec tail4 }
    7. 2014-08-10 11:01:41,181 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 35                   exec tail5 }
    8. 2014-08-10 11:01:41,181 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 36                   exec tail6 }
    9. ....
    10. ....
    11. ....
    12. 2014-08-10 11:01:51,550 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 39 36                exec tail96 }
    13. 2014-08-10 11:01:51,550 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 39 37                exec tail97 }
    14. 2014-08-10 11:01:51,551 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 39 38                exec tail98 }
    15. 2014-08-10 11:01:51,551 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 39 39                exec tail99 }
    16. 2014-08-10 11:01:51,551 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 31 30 30             exec tail100 }
    复制代码




    　　　　4)案例4：Syslogtcp
    　　　　Syslogtcp监听TCP的端口做为数据源

    　　　　　　a)创建agent配置文件

    1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/syslog_tcp.conf
    3. a1.sources = r1
    4. a1.sinks = k1
    5. a1.channels = c1
    7. # Describe/configure the source
    8. a1.sources.r1.type = syslogtcp
    9. a1.sources.r1.port = 5140
    10. a1.sources.r1.host = localhost
    11. a1.sources.r1.channels = c1
    13. # Describe the sink
    14. a1.sinks.k1.type = logger
    16. # Use a channel which buffers events in memory
    17. a1.channels.c1.type = memory
    18. a1.channels.c1.capacity = 1000
    19. a1.channels.c1.transactionCapacity = 100
    21. # Bind the source and sink to the channel
    22. a1.sources.r1.channels = c1
    23. a1.sinks.k1.channel = c1
    复制代码


    　　　　　　b)启动flume agent a1


    1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/syslog_tcp.conf -n a1 -Dflume.root.logger=INFO,console
    复制代码


    　　　　　　c)测试产生syslog

    1. root@m1:/home/hadoop# echo "hello idoall.org syslog" | nc localhost 5140
    复制代码


    　　　　　　d)在m1的控制台，可以看到以下信息：

    1. 14/08/10 11:41:45 INFO node.PollingPropertiesFileConfigurationProvider: Reloading configuration file:/home/hadoop/flume-1.5.0-bin/conf/syslog_tcp.conf
    2. 14/08/10 11:41:45 INFO conf.FlumeConfiguration: Added sinks: k1 Agent: a1
    3. 14/08/10 11:41:45 INFO conf.FlumeConfiguration: Processing:k1
    4. 14/08/10 11:41:45 INFO conf.FlumeConfiguration: Processing:k1
    5. 14/08/10 11:41:45 INFO conf.FlumeConfiguration: Post-validation flume configuration contains configuration for agents: [a1]
    6. 14/08/10 11:41:45 INFO node.AbstractConfigurationProvider: Creating channels
    7. 14/08/10 11:41:45 INFO channel.DefaultChannelFactory: Creating instance of channel c1 type memory
    8. 14/08/10 11:41:45 INFO node.AbstractConfigurationProvider: Created channel c1
    9. 14/08/10 11:41:45 INFO source.DefaultSourceFactory: Creating instance of source r1, type syslogtcp
    10. 14/08/10 11:41:45 INFO sink.DefaultSinkFactory: Creating instance of sink: k1, type: logger
    11. 14/08/10 11:41:45 INFO node.AbstractConfigurationProvider: Channel c1 connected to [r1, k1]
    12. 14/08/10 11:41:45 INFO node.Application: Starting new configuration:{ sourceRunners:{r1=EventDrivenSourceRunner: { source:org.apache.flume.source.SyslogTcpSource{name:r1,state:IDLE} }} sinkRunners:{k1=SinkRunner: { policy:org.apache.flume.sink.DefaultSinkProcessor@6538b14 counterGroup:{ name:null counters:{} } }} channels:{c1=org.apache.flume.channel.MemoryChannel{name: c1}} }
    13. 14/08/10 11:41:45 INFO node.Application: Starting Channel c1
    14. 14/08/10 11:41:45 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: CHANNEL, name: c1: Successfully registered new MBean.
    15. 14/08/10 11:41:45 INFO instrumentation.MonitoredCounterGroup: Component type: CHANNEL, name: c1 started
    16. 14/08/10 11:41:45 INFO node.Application: Starting Sink k1
    17. 14/08/10 11:41:45 INFO node.Application: Starting Source r1
    18. 14/08/10 11:41:45 INFO source.SyslogTcpSource: Syslog TCP Source starting...
    19. 14/08/10 11:42:15 WARN source.SyslogUtils: Event created from Invalid Syslog data.
    20. 14/08/10 11:42:15 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 68 65 6C 6C 6F 20 69 64 6F 61 6C 6C 2E 6F 72 67 hello idoall.org }
    复制代码




    　　　　5)案例5：JSONHandler
    　　　　　　a)创建agent配置文件

    1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/post_json.conf
    3. a1.sources = r1
    4. a1.sinks = k1
    5. a1.channels = c1
    7. # Describe/configure the source
    8. a1.sources.r1.type = org.apache.flume.source.http.HTTPSource
    9. a1.sources.r1.port = 8888
    10. a1.sources.r1.channels = c1
    12. # Describe the sink
    13. a1.sinks.k1.type = logger
    15. # Use a channel which buffers events in memory
    16. a1.channels.c1.type = memory
    17. a1.channels.c1.capacity = 1000
    18. a1.channels.c1.transactionCapacity = 100
    20. # Bind the source and sink to the channel
    21. a1.sources.r1.channels = c1
    22. a1.sinks.k1.channel = c1
    复制代码


    　　　　　　b)启动flume agent a1


    1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/post_json.conf -n a1 -Dflume.root.logger=INFO,console
    复制代码


    　　　　　　c)生成JSON 格式的POST request

    1. root@m1:/home/hadoop# curl -X POST -d '[{ "headers" :{"a" : "a1","b" : "b1"},"body" : "idoall.org_body"}]' http://localhost:8888
    复制代码


    　　　　　　d)在m1的控制台，可以看到以下信息：

    1. 14/08/10 11:49:59 INFO node.Application: Starting Channel c1
    2. 14/08/10 11:49:59 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: CHANNEL, name: c1: Successfully registered new MBean.
    3. 14/08/10 11:49:59 INFO instrumentation.MonitoredCounterGroup: Component type: CHANNEL, name: c1 started
    4. 14/08/10 11:49:59 INFO node.Application: Starting Sink k1
    5. 14/08/10 11:49:59 INFO node.Application: Starting Source r1
    6. 14/08/10 11:49:59 INFO mortbay.log: Logging to org.slf4j.impl.Log4jLoggerAdapter(org.mortbay.log) via org.mortbay.log.Slf4jLog
    7. 14/08/10 11:49:59 INFO mortbay.log: jetty-6.1.26
    8. 14/08/10 11:50:00 INFO mortbay.log: Started SelectChannelConnector@0.0.0.0:8888
    9. 14/08/10 11:50:00 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SOURCE, name: r1: Successfully registered new MBean.
    10. 14/08/10 11:50:00 INFO instrumentation.MonitoredCounterGroup: Component type: SOURCE, name: r1 started
    11. 14/08/10 12:14:32 INFO sink.LoggerSink: Event: { headers:{b=b1, a=a1} body: 69 64 6F 61 6C 6C 2E 6F 72 67 5F 62 6F 64 79    idoall.org_body }
    复制代码


    　　　　6)案例6：Hadoop sink
    　　　　　　a)创建agent配置文件

    1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/hdfs_sink.conf
    3. a1.sources = r1
    4. a1.sinks = k1
    5. a1.channels = c1
    7. # Describe/configure the source
    8. a1.sources.r1.type = syslogtcp
    9. a1.sources.r1.port = 5140
    10. a1.sources.r1.host = localhost
    11. a1.sources.r1.channels = c1
    13. # Describe the sink
    14. a1.sinks.k1.type = hdfs
    15. a1.sinks.k1.channel = c1
    16. a1.sinks.k1.hdfs.path = hdfs://m1:9000/user/flume/syslogtcp
    17. a1.sinks.k1.hdfs.filePrefix = Syslog
    18. a1.sinks.k1.hdfs.round = true
    19. a1.sinks.k1.hdfs.roundValue = 10
    20. a1.sinks.k1.hdfs.roundUnit = minute
    22. # Use a channel which buffers events in memory
    23. a1.channels.c1.type = memory
    24. a1.channels.c1.capacity = 1000
    25. a1.channels.c1.transactionCapacity = 100
    27. # Bind the source and sink to the channel
    28. a1.sources.r1.channels = c1
    29. a1.sinks.k1.channel = c1
    复制代码


    　　　　　　b)启动flume agent a1

    1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/hdfs_sink.conf -n a1 -Dflume.root.logger=INFO,console
    复制代码


    　　　　　　c)测试产生syslog

    1. root@m1:/home/hadoop# echo "hello idoall flume -> hadoop testing one" | nc localhost 5140
    复制代码


    　　　　　　d)在m1的控制台，可以看到以下信息：

    1. 14/08/10 12:20:39 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: CHANNEL, name: c1: Successfully registered new MBean.
    2. 14/08/10 12:20:39 INFO instrumentation.MonitoredCounterGroup: Component type: CHANNEL, name: c1 started
    3. 14/08/10 12:20:39 INFO node.Application: Starting Sink k1
    4. 14/08/10 12:20:39 INFO node.Application: Starting Source r1
    5. 14/08/10 12:20:39 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SINK, name: k1: Successfully registered new MBean.
    6. 14/08/10 12:20:39 INFO instrumentation.MonitoredCounterGroup: Component type: SINK, name: k1 started
    7. 14/08/10 12:20:39 INFO source.SyslogTcpSource: Syslog TCP Source starting...
    8. 14/08/10 12:21:46 WARN source.SyslogUtils: Event created from Invalid Syslog data.
    9. 14/08/10 12:21:49 INFO hdfs.HDFSSequenceFile: writeFormat = Writable, UseRawLocalFileSystem = false
    10. 14/08/10 12:21:49 INFO hdfs.BucketWriter: Creating hdfs://m1:9000/user/flume/syslogtcp//Syslog.1407644509504.tmp
    11. 14/08/10 12:22:20 INFO hdfs.BucketWriter: Closing hdfs://m1:9000/user/flume/syslogtcp//Syslog.1407644509504.tmp
    12. 14/08/10 12:22:20 INFO hdfs.BucketWriter: Close tries incremented
    13. 14/08/10 12:22:20 INFO hdfs.BucketWriter: Renaming hdfs://m1:9000/user/flume/syslogtcp/Syslog.1407644509504.tmp to hdfs://m1:9000/user/flume/syslogtcp/Syslog.1407644509504
    14. 14/08/10 12:22:20 INFO hdfs.HDFSEventSink: Writer callback called.
    复制代码


    　　　　　　e)在m1上再打开一个窗口，去hadoop上检查文件是否生成

    1. root@m1:/home/hadoop# /home/hadoop/hadoop-2.2.0/bin/hadoop fs -ls /user/flume/syslogtcp
    2. Found 1 items
    3. -rw-r--r--   3 root supergroup        155 2014-08-10 12:22 /user/flume/syslogtcp/Syslog.1407644509504
    4. root@m1:/home/hadoop# /home/hadoop/hadoop-2.2.0/bin/hadoop fs -cat /user/flume/syslogtcp/Syslog.1407644509504
    5. SEQ!org.apache.hadoop.io.LongWritable"org.apache.hadoop.io.BytesWritable^;>Gv$hello idoall flume -> hadoop testing one
    复制代码




    　　　　7)案例7：File Roll Sink
    　　　　　　a)创建agent配置文件

    1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/file_roll.conf
    3. a1.sources = r1
    4. a1.sinks = k1
    5. a1.channels = c1
    7. # Describe/configure the source
    8. a1.sources.r1.type = syslogtcp
    9. a1.sources.r1.port = 5555
    10. a1.sources.r1.host = localhost
    11. a1.sources.r1.channels = c1
    13. # Describe the sink
    14. a1.sinks.k1.type = file_roll
    15. a1.sinks.k1.sink.directory = /home/hadoop/flume-1.5.0-bin/logs
    17. # Use a channel which buffers events in memory
    18. a1.channels.c1.type = memory
    19. a1.channels.c1.capacity = 1000
    20. a1.channels.c1.transactionCapacity = 100
    22. # Bind the source and sink to the channel
    23. a1.sources.r1.channels = c1
    24. a1.sinks.k1.channel = c1
    复制代码


    　　　　　　b)启动flume agent a1

    1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/file_roll.conf -n a1 -Dflume.root.logger=INFO,console
    复制代码


    　　　　　　c)测试产生log

    1. root@m1:/home/hadoop# echo "hello idoall.org syslog" | nc localhost 5555
    2. root@m1:/home/hadoop# echo "hello idoall.org syslog 2" | nc localhost 5555
    复制代码


    　　　　　　d)查看/home/hadoop/flume-1.5.0-bin/logs下是否生成文件,默认每30秒生成一个新文件

    1. root@m1:/home/hadoop# ll /home/hadoop/flume-1.5.0-bin/logs
    2. 总用量 272
    3. drwxr-xr-x 3 root root   4096 Aug 10 12:50 ./
    4. drwxr-xr-x 9 root root   4096 Aug 10 10:59 ../
    5. -rw-r--r-- 1 root root     50 Aug 10 12:49 1407646164782-1
    6. -rw-r--r-- 1 root root      0 Aug 10 12:49 1407646164782-2
    7. -rw-r--r-- 1 root root      0 Aug 10 12:50 1407646164782-3
    8. root@m1:/home/hadoop# cat /home/hadoop/flume-1.5.0-bin/logs/1407646164782-1 /home/hadoop/flume-1.5.0-bin/logs/1407646164782-2
    9. hello idoall.org syslog
    10. hello idoall.org syslog 2
    复制代码




    　　　　8)案例8：Replicating Channel Selector
    　　　　Flume支持Fan out流从一个源到多个通道。有两种模式的Fan out，分别是复制和复用。在复制的情况下，流的事件被发送到所有的配置通道。在复用的情况下，事件被发送到可用的渠道中的一个子集。Fan out流需要指定源和Fan out通道的规则。

    　　　　这次我们需要用到m1,m2两台机器

    　　　　　　a)在m1创建replicating_Channel_Selector配置文件

    1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector.conf
    3. a1.sources = r1
    4. a1.sinks = k1 k2
    5. a1.channels = c1 c2
    7. # Describe/configure the source
    8. a1.sources.r1.type = syslogtcp
    9. a1.sources.r1.port = 5140
    10. a1.sources.r1.host = localhost
    11. a1.sources.r1.channels = c1 c2
    12. a1.sources.r1.selector.type = replicating
    14. # Describe the sink
    15. a1.sinks.k1.type = avro
    16. a1.sinks.k1.channel = c1
    17. a1.sinks.k1.hostname = m1
    18. a1.sinks.k1.port = 5555
    20. a1.sinks.k2.type = avro
    21. a1.sinks.k2.channel = c2
    22. a1.sinks.k2.hostname = m2
    23. a1.sinks.k2.port = 5555
    25. # Use a channel which buffers events in memory
    26. a1.channels.c1.type = memory
    27. a1.channels.c1.capacity = 1000
    28. a1.channels.c1.transactionCapacity = 100
    30. a1.channels.c2.type = memory
    31. a1.channels.c2.capacity = 1000
    32. a1.channels.c2.transactionCapacity = 100
    复制代码


    　　　　　　b)在m1创建replicating_Channel_Selector_avro配置文件

    1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector_avro.conf
    3. a1.sources = r1
    4. a1.sinks = k1
    5. a1.channels = c1
    7. # Describe/configure the source
    8. a1.sources.r1.type = avro
    9. a1.sources.r1.channels = c1
    10. a1.sources.r1.bind = 0.0.0.0
    11. a1.sources.r1.port = 5555
    13. # Describe the sink
    14. a1.sinks.k1.type = logger
    16. # Use a channel which buffers events in memory
    17. a1.channels.c1.type = memory
    18. a1.channels.c1.capacity = 1000
    19. a1.channels.c1.transactionCapacity = 100
    21. # Bind the source and sink to the channel
    22. a1.sources.r1.channels = c1
    23. a1.sinks.k1.channel = c1
    复制代码


    　　　　　　c)在m1上将2个配置文件复制到m2上一份

    1. root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector.conf
    2. root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector_avro.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector_avro.conf
    复制代码

    　　　　　　d)打开4个窗口，在m1和m2上同时启动两个flume agent

    1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector_avro.conf -n a1 -Dflume.root.logger=INFO,console
    2. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector.conf -n a1 -Dflume.root.logger=INFO,console
    复制代码


    　　　　　　e)然后在m1或m2的任意一台机器上，测试产生syslog

    1. root@m1:/home/hadoop# echo "hello idoall.org syslog" | nc localhost 5140
    复制代码


    　　　　　　f)在m1和m2的sink窗口，分别可以看到以下信息,这说明信息得到了同步：

    1. 14/08/10 14:08:18 INFO ipc.NettyServer: Connection to /192.168.1.51:46844 disconnected.
    2. 14/08/10 14:08:52 INFO ipc.NettyServer: [id: 0x90f8fe1f, /192.168.1.50:35873 => /192.168.1.50:5555] OPEN
    3. 14/08/10 14:08:52 INFO ipc.NettyServer: [id: 0x90f8fe1f, /192.168.1.50:35873 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555
    4. 14/08/10 14:08:52 INFO ipc.NettyServer: [id: 0x90f8fe1f, /192.168.1.50:35873 => /192.168.1.50:5555] CONNECTED: /192.168.1.50:35873
    5. 14/08/10 14:08:59 INFO ipc.NettyServer: [id: 0xd6318635, /192.168.1.51:46858 => /192.168.1.50:5555] OPEN
    6. 14/08/10 14:08:59 INFO ipc.NettyServer: [id: 0xd6318635, /192.168.1.51:46858 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555
    7. 14/08/10 14:08:59 INFO ipc.NettyServer: [id: 0xd6318635, /192.168.1.51:46858 => /192.168.1.50:5555] CONNECTED: /192.168.1.51:46858
    8. 14/08/10 14:09:20 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 68 65 6C 6C 6F 20 69 64 6F 61 6C 6C 2E 6F 72 67 hello idoall.org }
    复制代码




    　　　　9)案例9：Multiplexing Channel Selector
    　　　　　　a)在m1创建Multiplexing_Channel_Selector配置文件

    1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector.conf
    3. a1.sources = r1
    4. a1.sinks = k1 k2
    5. a1.channels = c1 c2
    7. # Describe/configure the source
    8. a1.sources.r1.type = org.apache.flume.source.http.HTTPSource
    9. a1.sources.r1.port = 5140
    10. a1.sources.r1.channels = c1 c2
    11. a1.sources.r1.selector.type = multiplexing
    13. a1.sources.r1.selector.header = type
    14. #映射允许每个值通道可以重叠。默认值可以包含任意数量的通道。
    15. a1.sources.r1.selector.mapping.baidu = c1
    16. a1.sources.r1.selector.mapping.ali = c2
    17. a1.sources.r1.selector.default = c1
    19. # Describe the sink
    20. a1.sinks.k1.type = avro
    21. a1.sinks.k1.channel = c1
    22. a1.sinks.k1.hostname = m1
    23. a1.sinks.k1.port = 5555
    25. a1.sinks.k2.type = avro
    26. a1.sinks.k2.channel = c2
    27. a1.sinks.k2.hostname = m2
    28. a1.sinks.k2.port = 5555
    30. # Use a channel which buffers events in memory
    31. a1.channels.c1.type = memory
    32. a1.channels.c1.capacity = 1000
    33. a1.channels.c1.transactionCapacity = 100
    35. a1.channels.c2.type = memory
    36. a1.channels.c2.capacity = 1000
    37. a1.channels.c2.transactionCapacity = 100
    复制代码




    　　　　　　b)在m1创建Multiplexing_Channel_Selector_avro配置文件

    1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector_avro.conf
    3. a1.sources = r1
    4. a1.sinks = k1
    5. a1.channels = c1
    7. # Describe/configure the source
    8. a1.sources.r1.type = avro
    9. a1.sources.r1.channels = c1
    10. a1.sources.r1.bind = 0.0.0.0
    11. a1.sources.r1.port = 5555
    13. # Describe the sink
    14. a1.sinks.k1.type = logger
    16. # Use a channel which buffers events in memory
    17. a1.channels.c1.type = memory
    18. a1.channels.c1.capacity = 1000
    19. a1.channels.c1.transactionCapacity = 100
    21. # Bind the source and sink to the channel
    22. a1.sources.r1.channels = c1
    23. a1.sinks.k1.channel = c1
    复制代码




    　　　　　　c)将2个配置文件复制到m2上一份

    1. root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector.conf  root@m2:/home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector.conf
    2. root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector_avro.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector_avro.conf
    复制代码




    　　　　　　d)打开4个窗口，在m1和m2上同时启动两个flume agent

    1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector_avro.conf -n a1 -Dflume.root.logger=INFO,console
    2. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector.conf -n a1 -Dflume.root.logger=INFO,console
    复制代码




    　　　　　　e)然后在m1或m2的任意一台机器上，测试产生syslog

    1. root@m1:/home/hadoop# curl -X POST -d '[{ "headers" :{"type" : "baidu"},"body" : "idoall_TEST1"}]' http://localhost:5140 && curl -X POST -d '[{ "headers" :{"type" : "ali"},"body" : "idoall_TEST2"}]' http://localhost:5140 && curl -X POST -d '[{ "headers" :{"type" : "qq"},"body" : "idoall_TEST3"}]' http://localhost:5140
    复制代码


    　　　　　f)在m1的sink窗口，可以看到以下信息：

    1. 14/08/10 14:32:21 INFO node.Application: Starting Sink k1
    2. 14/08/10 14:32:21 INFO node.Application: Starting Source r1
    3. 14/08/10 14:32:21 INFO source.AvroSource: Starting Avro source r1: { bindAddress: 0.0.0.0, port: 5555 }...
    4. 14/08/10 14:32:21 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SOURCE, name: r1: Successfully registered new MBean.
    5. 14/08/10 14:32:21 INFO instrumentation.MonitoredCounterGroup: Component type: SOURCE, name: r1 started
    6. 14/08/10 14:32:21 INFO source.AvroSource: Avro source r1 started.
    7. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0xcf00eea6, /192.168.1.50:35916 => /192.168.1.50:5555] OPEN
    8. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0xcf00eea6, /192.168.1.50:35916 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555
    9. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0xcf00eea6, /192.168.1.50:35916 => /192.168.1.50:5555] CONNECTED: /192.168.1.50:35916
    10. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x432f5468, /192.168.1.51:46945 => /192.168.1.50:5555] OPEN
    11. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x432f5468, /192.168.1.51:46945 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555
    12. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x432f5468, /192.168.1.51:46945 => /192.168.1.50:5555] CONNECTED: /192.168.1.51:46945
    13. 14/08/10 14:34:11 INFO sink.LoggerSink: Event: { headers:{type=baidu} body: 69 64 6F 61 6C 6C 5F 54 45 53 54 31             idoall_TEST1 }
    14. 14/08/10 14:34:57 INFO sink.LoggerSink: Event: { headers:{type=qq} body: 69 64 6F 61 6C 6C 5F 54 45 53 54 33             idoall_TEST3 }
    复制代码


    　　　　　g)在m2的sink窗口，可以看到以下信息：

    1. 14/08/10 14:32:27 INFO node.Application: Starting Sink k1
    2. 14/08/10 14:32:27 INFO node.Application: Starting Source r1
    3. 14/08/10 14:32:27 INFO source.AvroSource: Starting Avro source r1: { bindAddress: 0.0.0.0, port: 5555 }...
    4. 14/08/10 14:32:27 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SOURCE, name: r1: Successfully registered new MBean.
    5. 14/08/10 14:32:27 INFO instrumentation.MonitoredCounterGroup: Component type: SOURCE, name: r1 started
    6. 14/08/10 14:32:27 INFO source.AvroSource: Avro source r1 started.
    7. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0x7c2f0aec, /192.168.1.50:38104 => /192.168.1.51:5555] OPEN
    8. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0x7c2f0aec, /192.168.1.50:38104 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555
    9. 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0x7c2f0aec, /192.168.1.50:38104 => /192.168.1.51:5555] CONNECTED: /192.168.1.50:38104
    10. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x3d36f553, /192.168.1.51:48599 => /192.168.1.51:5555] OPEN
    11. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x3d36f553, /192.168.1.51:48599 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555
    12. 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x3d36f553, /192.168.1.51:48599 => /192.168.1.51:5555] CONNECTED: /192.168.1.51:48599
    13. 14/08/10 14:34:33 INFO sink.LoggerSink: Event: { headers:{type=ali} body: 69 64 6F 61 6C 6C 5F 54 45 53 54 32             idoall_TEST2 }
    复制代码




    　　　　可以看到，根据header中不同的条件分布到不同的channel上

    　　　　10)案例10：Flume Sink Processors
    　　　　failover的机器是一直发送给其中一个sink，当这个sink不可用的时候，自动发送到下一个sink。

    　　　　　　a)在m1创建Flume_Sink_Processors配置文件

    1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors.conf
    3. a1.sources = r1
    4. a1.sinks = k1 k2
    5. a1.channels = c1 c2
    7. #这个是配置failover的关键，需要有一个sink group
    8. a1.sinkgroups = g1
    9. a1.sinkgroups.g1.sinks = k1 k2
    10. #处理的类型是failover
    11. a1.sinkgroups.g1.processor.type = failover
    12. #优先级，数字越大优先级越高，每个sink的优先级必须不相同
    13. a1.sinkgroups.g1.processor.priority.k1 = 5
    14. a1.sinkgroups.g1.processor.priority.k2 = 10
    15. #设置为10秒，当然可以根据你的实际状况更改成更快或者很慢
    16. a1.sinkgroups.g1.processor.maxpenalty = 10000
    18. # Describe/configure the source
    19. a1.sources.r1.type = syslogtcp
    20. a1.sources.r1.port = 5140
    21. a1.sources.r1.channels = c1 c2
    22. a1.sources.r1.selector.type = replicating
    25. # Describe the sink
    26. a1.sinks.k1.type = avro
    27. a1.sinks.k1.channel = c1
    28. a1.sinks.k1.hostname = m1
    29. a1.sinks.k1.port = 5555
    31. a1.sinks.k2.type = avro
    32. a1.sinks.k2.channel = c2
    33. a1.sinks.k2.hostname = m2
    34. a1.sinks.k2.port = 5555
    36. # Use a channel which buffers events in memory
    37. a1.channels.c1.type = memory
    38. a1.channels.c1.capacity = 1000
    39. a1.channels.c1.transactionCapacity = 100
    41. a1.channels.c2.type = memory
    42. a1.channels.c2.capacity = 1000
    43. a1.channels.c2.transactionCapacity = 100
    复制代码


    　　　　　　b)在m1创建Flume_Sink_Processors_avro配置文件

    1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf
    3. a1.sources = r1
    4. a1.sinks = k1
    5. a1.channels = c1
    7. # Describe/configure the source
    8. a1.sources.r1.type = avro
    9. a1.sources.r1.channels = c1
    10. a1.sources.r1.bind = 0.0.0.0
    11. a1.sources.r1.port = 5555
    13. # Describe the sink
    14. a1.sinks.k1.type = logger
    16. # Use a channel which buffers events in memory
    17. a1.channels.c1.type = memory
    18. a1.channels.c1.capacity = 1000
    19. a1.channels.c1.transactionCapacity = 100
    21. # Bind the source and sink to the channel
    22. a1.sources.r1.channels = c1
    23. a1.sinks.k1.channel = c1
    复制代码


    　　　　　　c)将2个配置文件复制到m2上一份

    1. root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors.conf  root@m2:/home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors.conf
    2. root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf
    复制代码


    　　　　　　d)打开4个窗口，在m1和m2上同时启动两个flume agent

    1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf -n a1 -Dflume.root.logger=INFO,console
    2. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors.conf -n a1 -Dflume.root.logger=INFO,console
    复制代码


    　　　　　　e)然后在m1或m2的任意一台机器上，测试产生log

    1. root@m1:/home/hadoop# echo "idoall.org test1 failover" | nc localhost 5140
    复制代码


    　　　　　　f)因为m2的优先级高，所以在m2的sink窗口，可以看到以下信息，而m1没有：

    1. 14/08/10 15:02:46 INFO ipc.NettyServer: Connection to /192.168.1.51:48692 disconnected.
    2. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0x09a14036, /192.168.1.51:48704 => /192.168.1.51:5555] OPEN
    3. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0x09a14036, /192.168.1.51:48704 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555
    4. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0x09a14036, /192.168.1.51:48704 => /192.168.1.51:5555] CONNECTED: /192.168.1.51:48704
    5. 14/08/10 15:03:26 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 31 idoall.org test1 }
    复制代码


    　　　　　　g)这时我们停止掉m2机器上的sink(ctrl+c)，再次输出测试数据：

    1. root@m1:/home/hadoop# echo "idoall.org test2 failover" | nc localhost 5140
    复制代码


    　　　　　　h)可以在m1的sink窗口，看到读取到了刚才发送的两条测试数据：

    1. 14/08/10 15:02:46 INFO ipc.NettyServer: Connection to /192.168.1.51:47036 disconnected.
    2. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0xbcf79851, /192.168.1.51:47048 => /192.168.1.50:5555] OPEN
    3. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0xbcf79851, /192.168.1.51:47048 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555
    4. 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0xbcf79851, /192.168.1.51:47048 => /192.168.1.50:5555] CONNECTED: /192.168.1.51:47048
    5. 14/08/10 15:07:56 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 31 idoall.org test1 }
    6. 14/08/10 15:07:56 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 32 idoall.org test2 }
    复制代码


    　　　　　　i)我们再在m2的sink窗口中，启动sink：

    1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf -n a1 -Dflume.root.logger=INFO,console
    复制代码


    　　　　　　j)输入两批测试数据：

    1. root@m1:/home/hadoop# echo "idoall.org test3 failover" | nc localhost 5140 && echo "idoall.org test4 failover" | nc localhost 5140
    复制代码


    　　　　　k)在m2的sink窗口，我们可以看到以下信息，因为优先级的关系，log消息会再次落到m2上：

    1. 14/08/10 15:09:47 INFO node.Application: Starting Sink k1
    2. 14/08/10 15:09:47 INFO node.Application: Starting Source r1
    3. 14/08/10 15:09:47 INFO source.AvroSource: Starting Avro source r1: { bindAddress: 0.0.0.0, port: 5555 }...
    4. 14/08/10 15:09:47 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SOURCE, name: r1: Successfully registered new MBean.
    5. 14/08/10 15:09:47 INFO instrumentation.MonitoredCounterGroup: Component type: SOURCE, name: r1 started
    6. 14/08/10 15:09:47 INFO source.AvroSource: Avro source r1 started.
    7. 14/08/10 15:09:54 INFO ipc.NettyServer: [id: 0x96615732, /192.168.1.51:48741 => /192.168.1.51:5555] OPEN
    8. 14/08/10 15:09:54 INFO ipc.NettyServer: [id: 0x96615732, /192.168.1.51:48741 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555
    9. 14/08/10 15:09:54 INFO ipc.NettyServer: [id: 0x96615732, /192.168.1.51:48741 => /192.168.1.51:5555] CONNECTED: /192.168.1.51:48741
    10. 14/08/10 15:09:57 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 32 idoall.org test2 }
    11. 14/08/10 15:10:43 INFO ipc.NettyServer: [id: 0x12621f9a, /192.168.1.50:38166 => /192.168.1.51:5555] OPEN
    12. 14/08/10 15:10:43 INFO ipc.NettyServer: [id: 0x12621f9a, /192.168.1.50:38166 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555
    13. 14/08/10 15:10:43 INFO ipc.NettyServer: [id: 0x12621f9a, /192.168.1.50:38166 => /192.168.1.51:5555] CONNECTED: /192.168.1.50:38166
    14. 14/08/10 15:10:43 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 33 idoall.org test3 }
    15. 14/08/10 15:10:43 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 34 idoall.org test4 }
    复制代码




    　　　　11)案例11：Load balancing Sink Processor
    　　　　load balance type和failover不同的地方是，load balance有两个配置，一个是轮询，一个是随机。两种情况下如果被选择的sink不可用，就会自动尝试发送到下一个可用的sink上面。

    　　　　　　a)在m1创建Load_balancing_Sink_Processors配置文件

    1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors.conf
    3. a1.sources = r1
    4. a1.sinks = k1 k2
    5. a1.channels = c1
    7. #这个是配置Load balancing的关键，需要有一个sink group
    8. a1.sinkgroups = g1
    9. a1.sinkgroups.g1.sinks = k1 k2
    10. a1.sinkgroups.g1.processor.type = load_balance
    11. a1.sinkgroups.g1.processor.backoff = true
    12. a1.sinkgroups.g1.processor.selector = round_robin
    14. # Describe/configure the source
    15. a1.sources.r1.type = syslogtcp
    16. a1.sources.r1.port = 5140
    17. a1.sources.r1.channels = c1
    20. # Describe the sink
    21. a1.sinks.k1.type = avro
    22. a1.sinks.k1.channel = c1
    23. a1.sinks.k1.hostname = m1
    24. a1.sinks.k1.port = 5555
    26. a1.sinks.k2.type = avro
    27. a1.sinks.k2.channel = c1
    28. a1.sinks.k2.hostname = m2
    29. a1.sinks.k2.port = 5555
    31. # Use a channel which buffers events in memory
    32. a1.channels.c1.type = memory
    33. a1.channels.c1.capacity = 1000
    34. a1.channels.c1.transactionCapacity = 100
    复制代码




    　　　　　　b)在m1创建Load_balancing_Sink_Processors_avro配置文件

    1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors_avro.conf
    3. a1.sources = r1
    4. a1.sinks = k1
    5. a1.channels = c1
    7. # Describe/configure the source
    8. a1.sources.r1.type = avro
    9. a1.sources.r1.channels = c1
    10. a1.sources.r1.bind = 0.0.0.0
    11. a1.sources.r1.port = 5555
    13. # Describe the sink
    14. a1.sinks.k1.type = logger
    16. # Use a channel which buffers events in memory
    17. a1.channels.c1.type = memory
    18. a1.channels.c1.capacity = 1000
    19. a1.channels.c1.transactionCapacity = 100
    21. # Bind the source and sink to the channel
    22. a1.sources.r1.channels = c1
    23. a1.sinks.k1.channel = c1
    复制代码


    　　　　　　c)将2个配置文件复制到m2上一份

    1. root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors.conf  root@m2:/home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors.conf
    2. root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors_avro.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors_avro.conf
    复制代码


    　　　　　　d)打开4个窗口，在m1和m2上同时启动两个flume agent

    1. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors_avro.conf -n a1 -Dflume.root.logger=INFO,console
    2. root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors.conf -n a1 -Dflume.root.logger=INFO,console
    复制代码


    　　　　　　e)然后在m1或m2的任意一台机器上，测试产生log，一行一行输入，输入太快，容易落到一台机器上

    1. root@m1:/home/hadoop# echo "idoall.org test1" | nc localhost 5140
    2. root@m1:/home/hadoop# echo "idoall.org test2" | nc localhost 5140
    3. root@m1:/home/hadoop# echo "idoall.org test3" | nc localhost 5140
    4. root@m1:/home/hadoop# echo "idoall.org test4" | nc localhost 5140
    复制代码


    　　　　　　f)在m1的sink窗口，可以看到以下信息：

    1. 14/08/10 15:35:29 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 32 idoall.org test2 }
    2. 14/08/10 15:35:33 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 34 idoall.org test4 }
    复制代码


    　　　　　　g)在m2的sink窗口，可以看到以下信息：

    1. 14/08/10 15:35:27 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 31 idoall.org test1 }
    2. 14/08/10 15:35:29 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 33 idoall.org test3 }
    复制代码




    　　　　说明轮询模式起到了作用。

    　　　　12)案例12：Hbase sink


    　　　　　　a)在测试之前，请先参考《ubuntu12.04+hadoop2.2.0+zookeeper3.4.5+hbase0.96.2+hive0.13.1分布式环境部署》将hbase启动

    　　　　　　b)然后将以下文件复制到flume中：

    1. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/protobuf-java-2.5.0.jar /home/hadoop/flume-1.5.0-bin/lib
    2. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-client-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib
    3. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-common-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib
    4. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-protocol-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib
    5. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-server-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib
    6. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-hadoop2-compat-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib
    7. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-hadoop-compat-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib@@@
    8. cp /home/hadoop/hbase-0.96.2-hadoop2/lib/htrace-core-2.04.jar /home/hadoop/flume-1.5.0-bin/lib
    复制代码


    　　　　　　c)确保test_idoall_org表在hbase中已经存在

    　　　　　　d)在m1创建hbase_simple配置文件

    1. root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/hbase_simple.conf
    3. a1.sources = r1
    4. a1.sinks = k1
    5. a1.channels = c1
    7. # Describe/configure the source
    8. a1.sources.r1.type = syslogtcp
    9. a1.sources.r1.port = 5140
    10. a1.sources.r1.host = localhost
    11. a1.sources.r1.channels = c1
    13. # Describe the sink
    14. a1.sinks.k1.type = logger
    15. a1.sinks.k1.type = hbase
    16. a1.sinks.k1.table = test_idoall_org
    17. a1.sinks.k1.columnFamily = name
    18. a1.sinks.k1.column = idoall
    19. a1.sinks.k1.serializer =  org.apache.flume.sink.hbase.RegexHbaseEventSerializer
    20. a1.sinks.k1.channel = memoryChannel
    22. # Use a channel which buffers events in memory
    23. a1.channels.c1.type = memory
    24. a1.channels.c1.capacity = 1000
    25. a1.channels.c1.transactionCapacity = 100
    27. # Bind the source and sink to the channel
    28. a1.sources.r1.channels = c1
    29. a1.sinks.k1.channel = c1
    复制代码


    　　　　　　e)启动flume agent

    1. /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/hbase_simple.conf -n a1 -Dflume.root.logger=INFO,console
    复制代码


    　　　　　　f)测试产生syslog

    1. root@m1:/home/hadoop# echo "hello idoall.org from flume" | nc localhost 5140
    复制代码


    　　　　　　g)这时登录到hbase中，可以发现新数据已经插入

    1. root@m1:/home/hadoop# /home/hadoop/hbase-0.96.2-hadoop2/bin/hbase shell
    2. 2014-08-10 16:09:48,984 INFO  [main] Configuration.deprecation: hadoop.native.lib is deprecated. Instead, use io.native.lib.available
    3. HBase Shell; enter 'help<RETURN>' for list of supported commands.
    4. Type "exit<RETURN>" to leave the HBase Shell
    5. Version 0.96.2-hadoop2, r1581096, Mon Mar 24 16:03:18 PDT 2014
    7. hbase(main):001:0> list
    8. TABLE                                                                                                                                                                                                                  
    9. SLF4J: Class path contains multiple SLF4J bindings.
    10. SLF4J: Found binding in [jar:file:/home/hadoop/hbase-0.96.2-hadoop2/lib/slf4j-log4j12-1.6.4.jar!/org/slf4j/impl/StaticLoggerBinder.class]
    11. SLF4J: Found binding in [jar:file:/home/hadoop/hadoop-2.2.0/share/hadoop/common/lib/slf4j-log4j12-1.7.5.jar!/org/slf4j/impl/StaticLoggerBinder.class]
    12. SLF4J: See http://www.slf4j.org/codes.html#multiple_bindings for an explanation.
    13. hbase2hive_idoall                                                                                                                                                                                                      
    14. hive2hbase_idoall                                                                                                                                                                                                      
    15. test_idoall_org                                                                                                                                                                                                        
    16. 3 row(s) in 2.6880 seconds
    18. => ["hbase2hive_idoall", "hive2hbase_idoall", "test_idoall_org"]
    19. hbase(main):002:0> scan "test_idoall_org"
    20. ROW                                                    COLUMN+CELL                                                                                                                                                     
    21. 10086                                                 column=name:idoall, timestamp=1406424831473, value=idoallvalue                                                                                                  
    22. 1 row(s) in 0.0550 seconds
    24. hbase(main):003:0> scan "test_idoall_org"
    25. ROW                                                    COLUMN+CELL                                                                                                                                                     
    26. 10086                                                 column=name:idoall, timestamp=1406424831473, value=idoallvalue                                                                                                  
    27. 1407658495588-XbQCOZrKK8-0                            column=name:payload, timestamp=1407658498203, value=hello idoall.org from flume                                                                                 
    28. 2 row(s) in 0.0200 seconds
    30. hbase(main):004:0> quit
    复制代码


    经过这么多flume的例子测试，如果你全部做完后，会发现flume的功能真的很强大，可以进行各种搭配来完成你想要的工作，俗话说师傅领进门，修行在个人，如何能够结合你的产品业务，将flume更好的应用起来，快去动手实践吧。






    迦壹
    http://idoall.org/home.php?mod=s ... ;do=blog&id=550
  • 相关阅读:
    约瑟夫问题
    再谈Bellman-Ford
    Uva 11478 Halum操作
    Uva 11090 在环中
    Bellman-Ford
    Uva 10537 过路费
    Uva 10917
    LA 3713 宇航员分组
    2-SAT
    LA 3211 飞机调度
  • 原文地址：https://www.cnblogs.com/cxzdy/p/5134419.html
Copyright © 2011-2022 走看看