zoukankan      html  css  js  c++  java
  • Linux_磁盘管理

    一、linux磁盘管理

    1. 命令:fdisk -l
    2. brwx-rw--- 其中b(占位符)代表block,块设备文件
    3. sda,sdb... --> 硬盘 其中sda1,sda2..sdb1,sdb2...-->硬盘分区 (s:硬盘接口;d:disk)
      • 了解硬盘接口:stata,sas --> 服务器借口
      •          scsi,ide   --> 个人电脑接口
      • fdisk -l 后有个  cylinder     : 磁柱
        • 起始与结束
        • 查看硬盘是否分区
    4. 虚拟机添加新硬盘(单个文件),重新启动,分区
      1. 概念:主分区(格式化后直接使用),扩展分区(格式化后还要进行逻辑分区才能使用),逻辑分区(与主分区类似,但非系统分区)
      2. 利用fdisk /dev/sdb来对sdb(新加的硬盘)进行分区
      3. 分区步骤:分一个10G的主分区,剩下的为扩展分区,再从扩展分区中分出两块逻辑分区,结构为2+1
      4. 分区保存后,重启使分区文件加载生效
      5. 格式化:mkfs.文件系统(ext1,ext2,ext3,ext4,centos 7 使用的文件系统xfs) 例:mkfs.ext4 /dev/sdb6
      6. 格式化完毕,还需要挂载磁盘(mount临时的,用法mount /dev/sdb6 /mnt/(一般挂载点)),才能使用
      7. 若要永久挂载,需要写入配置文件/etc/fstab
      8. 取消挂载 umount /mnt/
      9. 查看挂载信息,容量等信息(df -h)

    二、实际操作

    [root@hadoop09-linux ~]# fdisk /dev/sdb
    Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
    Building a new DOS disklabel with disk identifier 0x2859532e.
    Changes will remain in memory only, until you decide to write them.
    After that, of course, the previous content won't be recoverable.
    
    Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
    
    WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
             switch off the mode (command 'c') and change display units to
             sectors (command 'u').
    
    Command (m for help): m
    Command action
       a   toggle a bootable flag
       b   edit bsd disklabel
       c   toggle the dos compatibility flag
       d   delete a partition
       l   list known partition types
       m   print this menu
       n   add a new partition
       o   create a new empty DOS partition table
       p   print the partition table
       q   quit without saving changes
       s   create a new empty Sun disklabel
       t   change a partition's system id
       u   change display/entry units
       v   verify the partition table
       w   write table to disk and exit
       x   extra functionality (experts only)
    
    Command (m for help): n
    Command action
       e   extended
       p   primary partition (1-4)
    p
    Partition number (1-4): 1
    First cylinder (1-2610, default 1): 
    Using default value 1
    Last cylinder, +cylinders or +size{K,M,G} (1-2610, default 2610): +10G
    
    Command (m for help): p
    
    Disk /dev/sdb: 21.5 GB, 21474836480 bytes
    255 heads, 63 sectors/track, 2610 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x2859532e
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdb1               1        1306    10490413+  83  Linux
    
    Command (m for help): n
    Command action
       e   extended
       p   primary partition (1-4)
    e
    Partition number (1-4): 2
    First cylinder (1307-2610, default 1307): 
    Using default value 1307
    Last cylinder, +cylinders or +size{K,M,G} (1307-2610, default 2610): 
    Using default value 2610
    
    Command (m for help): p
    
    Disk /dev/sdb: 21.5 GB, 21474836480 bytes
    255 heads, 63 sectors/track, 2610 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x2859532e
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdb1               1        1306    10490413+  83  Linux
    /dev/sdb2            1307        2610    10474380    5  Extended
    
    Command (m for help): n
    Command action
       l   logical (5 or over)
       p   primary partition (1-4)
    l
    First cylinder (1307-2610, default 1307): 
    Using default value 1307
    Last cylinder, +cylinders or +size{K,M,G} (1307-2610, default 2610): +4G
    
    Command (m for help): p
    
    Disk /dev/sdb: 21.5 GB, 21474836480 bytes
    255 heads, 63 sectors/track, 2610 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x2859532e
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdb1               1        1306    10490413+  83  Linux
    /dev/sdb2            1307        2610    10474380    5  Extended
    /dev/sdb5            1307        1829     4200966   83  Linux
    
    Command (m for help): n
    Command action
       l   logical (5 or over)
       p   primary partition (1-4)
    l
    First cylinder (1830-2610, default 1830): 
    Using default value 1830
    Last cylinder, +cylinders or +size{K,M,G} (1830-2610, default 2610): +4G
    
    Command (m for help): p
    
    Disk /dev/sdb: 21.5 GB, 21474836480 bytes
    255 heads, 63 sectors/track, 2610 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x2859532e
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdb1               1        1306    10490413+  83  Linux
    /dev/sdb2            1307        2610    10474380    5  Extended
    /dev/sdb5            1307        1829     4200966   83  Linux
    /dev/sdb6            1830        2352     4200966   83  Linux
    
    Command (m for help): m
    Command action
       a   toggle a bootable flag
       b   edit bsd disklabel
       c   toggle the dos compatibility flag
       d   delete a partition
       l   list known partition types
       m   print this menu
       n   add a new partition
       o   create a new empty DOS partition table
       p   print the partition table
       q   quit without saving changes
       s   create a new empty Sun disklabel
       t   change a partition's system id
       u   change display/entry units
       v   verify the partition table
       w   write table to disk and exit
       x   extra functionality (experts only)
    
    Command (m for help): w
    The partition table has been altered!
    
    Calling ioctl() to re-read partition table.
    Syncing disks.
    [root@hadoop09-linux ~]# fdisk -l
    
    Disk /dev/sda: 21.5 GB, 21474836480 bytes
    255 heads, 63 sectors/track, 2610 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x00062208
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/sda1   *           1          39      307200   83  Linux
    Partition 1 does not end on cylinder boundary.
    /dev/sda2              39        2358    18631680   83  Linux
    /dev/sda3            2358        2611     2031616   82  Linux swap / Solaris
    
    Disk /dev/sdb: 21.5 GB, 21474836480 bytes
    255 heads, 63 sectors/track, 2610 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x2859532e
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdb1               1        1306    10490413+  83  Linux
    /dev/sdb2            1307        2610    10474380    5  Extended
    /dev/sdb5            1307        1829     4200966   83  Linux
    /dev/sdb6            1830        2352     4200966   83  Linux
    [root@hadoop09-linux ~]# reboot
    
    Broadcast message from root@hadoop09-linux.ibeifeng.com
    	(/dev/pts/0) at 8:51 ...
    
    The system is going down for reboot NOW!
    [root@hadoop09-linux ~]# 
    Connection closed by foreign host.
    
    Disconnected from remote host(CentOs_64) at 23:52:01.
    
    Type `help' to learn how to use Xshell prompt.
    [d:~]$ 
    
    Connecting to 192.168.0.108:22...
    Connection established.
    To escape to local shell, press 'Ctrl+Alt+]'.
    
    Last login: Wed Sep  7 08:27:29 2016 from 192.168.0.105
    [root@hadoop09-linux ~]# fdisk -l
    
    Disk /dev/sda: 21.5 GB, 21474836480 bytes
    255 heads, 63 sectors/track, 2610 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x00062208
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/sda1   *           1          39      307200   83  Linux
    Partition 1 does not end on cylinder boundary.
    /dev/sda2              39        2358    18631680   83  Linux
    /dev/sda3            2358        2611     2031616   82  Linux swap / Solaris
    
    Disk /dev/sdb: 21.5 GB, 21474836480 bytes
    255 heads, 63 sectors/track, 2610 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x2859532e
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdb1               1        1306    10490413+  83  Linux
    /dev/sdb2            1307        2610    10474380    5  Extended
    /dev/sdb5            1307        1829     4200966   83  Linux
    /dev/sdb6            1830        2352     4200966   83  Linux
    [root@hadoop09-linux ~]# mkfs.ext4 /dev/sdb6
    mke2fs 1.41.12 (17-May-2010)
    Filesystem label=
    OS type: Linux
    Block size=4096 (log=2)
    Fragment size=4096 (log=2)
    Stride=0 blocks, Stripe width=0 blocks
    262944 inodes, 1050241 blocks
    52512 blocks (5.00%) reserved for the super user
    First data block=0
    Maximum filesystem blocks=1077936128
    33 block groups
    32768 blocks per group, 32768 fragments per group
    7968 inodes per group
    Superblock backups stored on blocks: 
    	32768, 98304, 163840, 229376, 294912, 819200, 884736
    
    Writing inode tables: done                            
    Creating journal (32768 blocks): done
    Writing superblocks and filesystem accounting information: done
    
    This filesystem will be automatically checked every 34 mounts or
    180 days, whichever comes first.  Use tune2fs -c or -i to override.
    [root@hadoop09-linux ~]# mount /dev/sdb6 /mnt/
    [root@hadoop09-linux ~]# df -h
    Filesystem            Size  Used Avail Use% Mounted on
    /dev/sda2              18G  2.5G   15G  15% /
    tmpfs                 495M   72K  495M   1% /dev/shm
    /dev/sda1             291M   33M  243M  12% /boot
    /dev/sdb6             4.0G  137M  3.7G   4% /mnt
    

      永久挂载

    [root@hadoop09-linux ~]# vi /etc/fstab 
    
    #
    # /etc/fstab
    # Created by anaconda on Fri Sep  2 08:10:36 2016
    #
    # Accessible filesystems, by reference, are maintained under '/dev/disk'
    # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
    #
    UUID=517d46c1-d4c6-41ba-94f7-b0cac93f178b /                       ext4    defaults        1 1
    UUID=75090abd-0581-411d-863a-73d735fb90df /boot                   ext4    defaults        1 2
    UUID=25865ffd-404c-49c2-afba-374d7a5a81df swap                    swap    defaults        0 0
    tmpfs                   /dev/shm                tmpfs   defaults        0 0
    devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
    sysfs                   /sys                    sysfs   defaults        0 0
    proc                    /proc                   proc    defaults        0 0
    /etc/sdb6               /mnt                    ext4    defaults        0 0
    

      

  • 相关阅读:
    操作mysql的指令
    linux下安装mongodb
    linux将指令加入开机启动或加入环境变量
    php请求远程url内容方法
    nosql基本了解
    堆排序的实现
    转:导出csv文件数字会自动变科学计数法的解决方法
    jQuery筛选结果等于true的筛选
    转:Jquery的parent和parents(找到某一特定的祖先元素)
    drupal7 带表达式条件的update
  • 原文地址:https://www.cnblogs.com/eRrsr/p/5851591.html
Copyright © 2011-2022 走看看