一、环境安装（10.0.0）
1、安装依赖软件
yum -y install policycoreutils policycoreutils-python openssh-server openssh-clients postfix
2、设置postfix开机自启，并启动，postfix支持gitlab发信功能（可选操作安装支持发信功能）
systemctl enable postfix && systemctl start postfix
如果报错：
Job for postfix.service failed because the control process exited with error code. See "systemctl status postfix.service" and "journalctl -xe" for details.
这是因为防火墙或者配置文件导致，无法启动的邮件服务！！
1、首先关闭防火墙！
#systemctl stop firewalld && systemctl mask firewalld
2、修改main.cf配置文件设置
#cat /etc/postfix/main.cf //查看main.cf配置文件设置 #vim /etc/postfix/main.cf //更改
更改：
inet_protocols = ipv4 inet_interfaces = all
3、下载镜像
Centos 6 : 清华大学镜像站
Centos 7 : 清华大学镜像站
下载gitlab安装包，然后安装
命令如下：
# wget https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el7/gitlab-ce-10.0.0-ce.0.el7.x86_64.rpm
如图：
安装命令：
rpm -i gitlab-ce-10.0.0-ce.0.el7.x86_64.rpm
如图：
4、修改gitlab配置文件指定服务器ip和自定义端口
vim /etc/gitlab/gitlab.rb
设置
external_url 'http://localhost:9090'
5、重置并启动GitLab
执行以下命令 #gitlab-ctl reconfigure #gitlab-ctl restart
访问：IP+9090即可（记得开启防火墙）
这是由于我配置过低导致毕竟，restart 都是ok:run的状态
二、gitlab的发信配置
1、环境查看
代码如下：
# gitlab-rake gitlab:env:info 或者以下这种 # cat /opt/gitlab/embedded/service/gitlab-rails/VERSION
2、更改cat /etc/gitlab/gitlab.rb
# vim /etc/gitlab/gitlab.rb
更改部分
gitlab_rails['gitlab_email_from'] = '614350682@qq.com' //邮箱@qq.com 配置gitlab的发信人
gitlab_rails['smtp_enable'] = true
gitlab_rails['smtp_address'] = "smtp.qq.com"
gitlab_rails['smtp_port'] = 465
gitlab_rails['smtp_user_name'] = "614350682@qq.com" //邮箱@qq.com
gitlab_rails['smtp_password'] = "dpssmzkeksusbbag" //开通smtp时返回的授权码
gitlab_rails['smtp_domain'] = "qq.com"
gitlab_rails['smtp_authentication'] = "login"
gitlab_rails['smtp_enable_starttls_auto'] = true
gitlab_rails['smtp_tls'] = true
user['git_user_email'] = "614350682@qq.com" //邮箱@qq.com
发送命令：
#gitlab-rails console #Notify.test_email('623072681@qq.com','邮件标题','邮件内容').deliver_now
效果如图：
linux下gitlab.rb文件
#yum install lrzsz //安装se命令从linux下载到本地 #sz /etc/gitlab/gitlab.rb //保存文件夹弹出窗口保存的路径
全部代码：
## GitLab configuration settings ##! This file is generated during initial installation and **is not** modified ##! during upgrades. ##! Check out the latest version of this file to know about the different ##! settings that can be configured by this file, which may be found at: ##! https://gitlab.com/gitlab-org/omnibus-gitlab/raw/master/files/gitlab-config-template/gitlab.rb.template ## GitLab URL ##! URL on which GitLab will be reachable. ##! For more details on configuring external_url see: ##! https://docs.gitlab.com/omnibus/settings/configuration.html#configuring-the-external-url-for-gitlab external_url 'http://localhost:9090' ## Legend ##! The following notations at the beginning of each line may be used to ##! differentiate between components of this file and to easily select them using ##! a regex. ##! ## Titles, subtitles etc ##! ##! More information - Description, Docs, Links, Issues etc. ##! Configuration settings have a single # followed by a single space at the ##! beginning; Remove them to enable the setting. ##! **Configuration settings below are optional.** ##! **The values currently assigned are only examples and ARE NOT the default ##! values.** ################################################################################ ################################################################################ ## Configuration Settings for GitLab CE and EE ## ################################################################################ ################################################################################ ################################################################################ ## gitlab.yml configuration ##! Docs: https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/doc/settings/gitlab.yml.md ################################################################################ # gitlab_rails['gitlab_ssh_host'] = 'ssh.host_example.com' # gitlab_rails['time_zone'] = 'UTC' ### Email Settings # gitlab_rails['gitlab_email_enabled'] = true gitlab_rails['gitlab_email_from'] = '614350682@qq.com' # gitlab_rails['gitlab_email_display_name'] = 'Example' # gitlab_rails['gitlab_email_reply_to'] = 'noreply@example.com' # gitlab_rails['gitlab_email_subject_suffix'] = '' ### GitLab user privileges # gitlab_rails['gitlab_default_can_create_group'] = true # gitlab_rails['gitlab_username_changing_enabled'] = true ### Default Theme # gitlab_rails['gitlab_default_theme'] = 2 ### Default project feature settings # gitlab_rails['gitlab_default_projects_features_issues'] = true # gitlab_rails['gitlab_default_projects_features_merge_requests'] = true # gitlab_rails['gitlab_default_projects_features_wiki'] = true # gitlab_rails['gitlab_default_projects_features_snippets'] = true # gitlab_rails['gitlab_default_projects_features_builds'] = true # gitlab_rails['gitlab_default_projects_features_container_registry'] = true ### Automatic issue closing ###! See https://docs.gitlab.com/ce/customization/issue_closing.html for more ###! information about this pattern. # gitlab_rails['gitlab_issue_closing_pattern'] = "((?:[Cc]los(?:e[sd]?|ing)|[Ff]ix(?:e[sd]|ing)?|[Rr]esolv(?:e[sd]?|ing))(:?) +(?:(?:issues? +)?%{issue_ref}(?:(?:, *| +and +)?)|([A-Z][A-Z0-9_]+-d+))+)" ### Download location ###! When a user clicks e.g. 'Download zip' on a project, a temporary zip file ###! is created in the following directory. # gitlab_rails['gitlab_repository_downloads_path'] = 'tmp/repositories' ### Gravatar Settings # gitlab_rails['gravatar_plain_url'] = 'http://www.gravatar.com/avatar/%{hash}?s=%{size}&d=identicon' # gitlab_rails['gravatar_ssl_url'] = 'https://secure.gravatar.com/avatar/%{hash}?s=%{size}&d=identicon' ### Auxiliary jobs ###! Periodically executed jobs, to self-heal Gitlab, do external ###! synchronizations, etc. ###! Docs: https://github.com/ondrejbartas/sidekiq-cron#adding-cron-job ###! https://docs.gitlab.com/ce/ci/yaml/README.html#artifacts:expire_in # gitlab_rails['stuck_ci_jobs_worker_cron'] = "0 0 * * *" # gitlab_rails['expire_build_artifacts_worker_cron'] = "50 * * * *" # gitlab_rails['pipeline_schedule_worker_cron'] = "41 * * * *" # gitlab_rails['repository_check_worker_cron'] = "20 * * * *" # gitlab_rails['admin_email_worker_cron'] = "0 0 * * 0" # gitlab_rails['repository_archive_cache_worker_cron'] = "0 * * * *" ### Webhook Settings ###! Number of seconds to wait for HTTP response after sending webhook HTTP POST ###! request (default: 10) # gitlab_rails['webhook_timeout'] = 10 ### Trusted proxies ###! Customize if you have GitLab behind a reverse proxy which is running on a ###! different machine. ###! **Add the IP address for your reverse proxy to the list, otherwise users ###! will appear signed in from that address.** # gitlab_rails['trusted_proxies'] = [] ### Monitoring settings ###! IP whitelist controlling access to monitoring endpoints # gitlab_rails['monitoring_whitelist'] = ['127.0.0.0/8'] ###! Time between sampling of unicorn socket metrics, in seconds # gitlab_rails['monitoring_unicorn_sampler_interval'] = 10 ### Reply by email ###! Allow users to comment on issues and merge requests by replying to ###! notification emails. ###! Docs: https://docs.gitlab.com/ce/administration/reply_by_email.html # gitlab_rails['incoming_email_enabled'] = true #### Incoming Email Address ####! The email address including the `%{key}` placeholder that will be replaced ####! to reference the item being replied to. ####! **The placeholder can be omitted but if present, it must appear in the ####! "user" part of the address (before the `@`).** # gitlab_rails['incoming_email_address'] = "gitlab-incoming+%{key}@gmail.com" #### Email account username ####! **With third party providers, this is usually the full email address.** ####! **With self-hosted email servers, this is usually the user part of the ####! email address.** # gitlab_rails['incoming_email_email'] = "gitlab-incoming@gmail.com" #### Email account password # gitlab_rails['incoming_email_password'] = "[REDACTED]" #### IMAP Settings # gitlab_rails['incoming_email_host'] = "imap.gmail.com" # gitlab_rails['incoming_email_port'] = 993 # gitlab_rails['incoming_email_ssl'] = true # gitlab_rails['incoming_email_start_tls'] = false #### Incoming Mailbox Settings ####! The mailbox where incoming mail will end up. Usually "inbox". # gitlab_rails['incoming_email_mailbox_name'] = "inbox" ####! The IDLE command timeout. # gitlab_rails['incoming_email_idle_timeout'] = 60 ### Job Artifacts # gitlab_rails['artifacts_enabled'] = true # gitlab_rails['artifacts_path'] = "/mnt/storage/artifacts" # gitlab_rails['artifacts_object_store_enabled'] = false # EE only # gitlab_rails['artifacts_object_store_remote_directory'] = "artifacts" # gitlab_rails['artifacts_object_store_connection'] = { # 'provider' => 'AWS', # 'region' => 'eu-west-1', # 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID', # 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY', # # # The below options configure an S3 compatible host instead of AWS # # 'host' => 's3.amazonaws.com', # # 'endpoint' => nil, # # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object' # } ### Git LFS # gitlab_rails['lfs_enabled'] = true # gitlab_rails['lfs_storage_path'] = "/mnt/storage/lfs-objects" # gitlab_rails['lfs_object_store_enabled'] = false # EE only # gitlab_rails['lfs_object_store_background_upload'] = true # gitlab_rails['lfs_object_store_remote_directory'] = "lfs-objects" # gitlab_rails['lfs_object_store_connection'] = { # 'provider' => 'AWS', # 'region' => 'eu-west-1', # 'aws_access_key_id' => 'AWS_ACCESS_KEY_ID', # 'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY', # # # The below options configure an S3 compatible host instead of AWS # # 'host' => 's3.amazonaws.com', # # 'endpoint' => nil, # # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object' # } ### Usage Statistics # gitlab_rails['usage_ping_enabled'] = true ### GitLab Mattermost ###! These settings are void if Mattermost is installed on the same omnibus ###! install # gitlab_rails['mattermost_host'] = "https://mattermost.example.com" ### LDAP Settings ###! Docs: https://docs.gitlab.com/omnibus/settings/ldap.html ###! **Be careful not to break the indentation in the ldap_servers block. It is ###! in yaml format and the spaces must be retained. Using tabs will not work.** # gitlab_rails['ldap_enabled'] = false ###! **remember to close this block with 'EOS' below** # gitlab_rails['ldap_servers'] = YAML.load <<-'EOS' # main: # 'main' is the GitLab 'provider ID' of this LDAP server # label: 'LDAP' # host: '_your_ldap_server' # port: 389 # uid: 'sAMAccountName' # bind_dn: '_the_full_dn_of_the_user_you_will_bind_with' # password: '_the_password_of_the_bind_user' # encryption: 'plain' # "start_tls" or "simple_tls" or "plain" # verify_certificates: true # ca_file: '' # ssl_version: '' # active_directory: true # allow_username_or_email_login: false # block_auto_created_users: false # base: '' # user_filter: '' # attributes: # username: ['uid', 'userid', 'sAMAccountName'] # email: ['mail', 'email', 'userPrincipalName'] # name: 'cn' # first_name: 'givenName' # last_name: 'sn' # ## EE only # group_base: '' # admin_group: '' # sync_ssh_keys: false # # secondary: # 'secondary' is the GitLab 'provider ID' of second LDAP server # label: 'LDAP' # host: '_your_ldap_server' # port: 389 # uid: 'sAMAccountName' # bind_dn: '_the_full_dn_of_the_user_you_will_bind_with' # password: '_the_password_of_the_bind_user' # encryption: 'plain' # "start_tls" or "simple_tls" or "plain" # verify_certificates: true # ca_file: '' # ssl_version: '' # active_directory: true # allow_username_or_email_login: false # block_auto_created_users: false # base: '' # user_filter: '' # attributes: # username: ['uid', 'userid', 'sAMAccountName'] # email: ['mail', 'email', 'userPrincipalName'] # name: 'cn' # first_name: 'givenName' # last_name: 'sn' # ## EE only # group_base: '' # admin_group: '' # sync_ssh_keys: false # EOS ### OmniAuth Settings ###! Docs: https://docs.gitlab.com/ce/integration/omniauth.html # gitlab_rails['omniauth_enabled'] = false # gitlab_rails['omniauth_allow_single_sign_on'] = ['saml'] # gitlab_rails['omniauth_sync_email_from_provider'] = 'saml' # gitlab_rails['omniauth_sync_profile_from_provider'] = ['saml'] # gitlab_rails['omniauth_sync_profile_attributes'] = ['email'] # gitlab_rails['omniauth_auto_sign_in_with_provider'] = 'saml' # gitlab_rails['omniauth_block_auto_created_users'] = true # gitlab_rails['omniauth_auto_link_ldap_user'] = false # gitlab_rails['omniauth_auto_link_saml_user'] = false # gitlab_rails['omniauth_external_providers'] = ['twitter', 'google_oauth2'] # gitlab_rails['omniauth_providers'] = [ # { # "name" => "google_oauth2", # "app_id" => "YOUR APP ID", # "app_secret" => "YOUR APP SECRET", # "args" => { "access_type" => "offline", "approval_prompt" => "" } # } # ] ### Backup Settings ###! Docs: https://docs.gitlab.com/omnibus/settings/backups.html # gitlab_rails['manage_backup_path'] = true # gitlab_rails['backup_path'] = "/var/opt/gitlab/backups" ###! Docs: https://docs.gitlab.com/ce/raketasks/backup_restore.html#backup-archive-permissions # gitlab_rails['backup_archive_permissions'] = 0644 # gitlab_rails['backup_pg_schema'] = 'public' ###! The duration in seconds to keep backups before they are allowed to be deleted # gitlab_rails['backup_keep_time'] = 604800 # gitlab_rails['backup_upload_connection'] = { # 'provider' => 'AWS', # 'region' => 'eu-west-1', # 'aws_access_key_id' => 'AKIAKIAKI', # 'aws_secret_access_key' => 'secret123' # } # gitlab_rails['backup_upload_remote_directory'] = 'my.s3.bucket' # gitlab_rails['backup_multipart_chunk_size'] = 104857600 ###! **Turns on AWS Server-Side Encryption with Amazon S3-Managed Keys for ###! backups** # gitlab_rails['backup_encryption'] = 'AES256' ###! **Specifies Amazon S3 storage class to use for backups. Valid values ###! include 'STANDARD', 'STANDARD_IA', 'GLACIER', and ###! 'REDUCED_REDUNDANCY'** # gitlab_rails['backup_storage_class'] = 'STANDARD' ### For setting up different data storing directory ###! Docs: https://docs.gitlab.com/omnibus/settings/configuration.html#storing-git-data-in-an-alternative-directory ###! **If you want to use a single non-default directory to store git data use a ###! path that doesn't contain symlinks.** # git_data_dirs({ # "default" => { # "path" => "/mnt/nfs-01/git-data", # "failure_count_threshold" => 10, # "failure_wait_time" => 30, # "failure_reset_time" => 1800, # "storage_timeout" => 30 # } # }) ### Gitaly settings # gitlab_rails['gitaly_token'] = 'secret token' ### For storing GitLab application uploads, eg. LFS objects, build artifacts ###! Docs: https://docs.gitlab.com/ce/development/shared_files.html # gitlab_rails['shared_path'] = '/var/opt/gitlab/gitlab-rails/shared' ### GitLab Shell settings for GitLab # gitlab_rails['gitlab_shell_ssh_port'] = 22 # gitlab_rails['git_max_size'] = 20971520 # gitlab_rails['git_timeout'] = 10 # gitlab_rails['gitlab_shell_git_timeout'] = 800 ### Extra customization # gitlab_rails['extra_google_analytics_id'] = '_your_tracking_id' # gitlab_rails['extra_piwik_url'] = '_your_piwik_url' # gitlab_rails['extra_piwik_site_id'] = '_your_piwik_site_id' ##! Docs: https://docs.gitlab.com/omnibus/settings/environment-variables.html # gitlab_rails['env'] = { # 'BUNDLE_GEMFILE' => "/opt/gitlab/embedded/service/gitlab-rails/Gemfile", # 'PATH' => "/opt/gitlab/bin:/opt/gitlab/embedded/bin:/bin:/usr/bin" # } # gitlab_rails['rack_attack_git_basic_auth'] = { # 'enabled' => true, # 'ip_whitelist' => ["127.0.0.1"], # 'maxretry' => 10, # 'findtime' => 60, # 'bantime' => 3600 # } # gitlab_rails['rack_attack_protected_paths'] = [ # '/users/password', # '/users/sign_in', # '/api/#{API::API.version}/session.json', # '/api/#{API::API.version}/session', # '/users', # '/users/confirmation', # '/unsubscribes/', # '/import/github/personal_access_token' # ] ###! **We do not recommend changing these directories.** # gitlab_rails['dir'] = "/var/opt/gitlab/gitlab-rails" # gitlab_rails['log_directory'] = "/var/log/gitlab/gitlab-rails" ### GitLab application settings # gitlab_rails['uploads_directory'] = "/var/opt/gitlab/gitlab-rails/uploads" # gitlab_rails['rate_limit_requests_per_period'] = 10 # gitlab_rails['rate_limit_period'] = 60 #### Change the initial default admin password and shared runner registraion tokens. ####! **Only applicable on initial setup, changing these settings after database ####! is created and seeded won't yield any change.** # gitlab_rails['initial_root_password'] = "password" # gitlab_rails['initial_shared_runners_registration_token'] = "token" #### Enable or disable automatic database migrations # gitlab_rails['auto_migrate'] = true #### This is advanced feature used by large gitlab deployments where loading #### whole RAILS env takes a lot of time. # gitlab_rails['rake_cache_clear'] = true ### GitLab database settings ###! Docs: https://docs.gitlab.com/omnibus/settings/database.html ###! **Only needed if you use an external database.** # gitlab_rails['db_adapter'] = "postgresql" # gitlab_rails['db_encoding'] = "unicode" # gitlab_rails['db_collation'] = nil # gitlab_rails['db_database'] = "gitlabhq_production" # gitlab_rails['db_pool'] = 10 # gitlab_rails['db_username'] = "gitlab" # gitlab_rails['db_password'] = nil # gitlab_rails['db_host'] = nil # gitlab_rails['db_port'] = 5432 # gitlab_rails['db_socket'] = nil # gitlab_rails['db_sslmode'] = nil # gitlab_rails['db_sslrootcert'] = nil # gitlab_rails['db_prepared_statements'] = true # gitlab_rails['db_statements_limit'] = 1000 ### GitLab Redis settings ###! Connect to your own Redis instance ###! Docs: https://docs.gitlab.com/omnibus/settings/redis.html #### Redis TCP connection # gitlab_rails['redis_host'] = "127.0.0.1" # gitlab_rails['redis_port'] = 6379 # gitlab_rails['redis_password'] = nil # gitlab_rails['redis_database'] = 0 #### Redis local UNIX socket (will be disabled if TCP method is used) # gitlab_rails['redis_socket'] = "/var/opt/gitlab/redis/redis.socket" #### Sentinel support ####! To have Sentinel working, you must enable Redis TCP connection support ####! above and define a few Sentinel hosts below (to get a reliable setup ####! at least 3 hosts). ####! **You don't need to list every sentinel host, but the ones not listed will ####! not be used in a fail-over situation to query for the new master.** # gitlab_rails['redis_sentinels'] = [ # {'host' => '127.0.0.1', 'port' => 26379}, # ] ### GitLab email server settings ###! Docs: https://docs.gitlab.com/omnibus/settings/smtp.html ###! **Use smtp instead of sendmail/postfix.** gitlab_rails['smtp_enable'] = true gitlab_rails['smtp_address'] = "smtp.qq.com" gitlab_rails['smtp_port'] = 465 gitlab_rails['smtp_user_name'] = "614350682@qq.com" gitlab_rails['smtp_password'] = "dpssmzkeksusbbag" gitlab_rails['smtp_domain'] = "qq.com" gitlab_rails['smtp_authentication'] = "login" gitlab_rails['smtp_enable_starttls_auto'] = true gitlab_rails['smtp_tls'] = true ###! **Can be: 'none', 'peer', 'client_once', 'fail_if_no_peer_cert'** ###! Docs: http://api.rubyonrails.org/classes/ActionMailer/Base.html # gitlab_rails['smtp_openssl_verify_mode'] = 'none' # gitlab_rails['smtp_ca_path'] = "/etc/ssl/certs" # gitlab_rails['smtp_ca_file'] = "/etc/ssl/certs/ca-certificates.crt" ################################################################################ ## Container Registry settings ##! Docs: https://docs.gitlab.com/ce/administration/container_registry.html ################################################################################ # registry_external_url 'https://registry.gitlab.example.com' ### Settings used by GitLab application # gitlab_rails['registry_enabled'] = true # gitlab_rails['registry_host'] = "registry.gitlab.example.com" # gitlab_rails['registry_port'] = "5005" # gitlab_rails['registry_path'] = "/var/opt/gitlab/gitlab-rails/shared/registry" ###! **Do not change the following 3 settings unless you know what you are ###! doing** # gitlab_rails['registry_api_url'] = "http://localhost:5000" # gitlab_rails['registry_key_path'] = "/var/opt/gitlab/gitlab-rails/certificate.key" # gitlab_rails['registry_issuer'] = "omnibus-gitlab-issuer" ### Settings used by Registry application # registry['enable'] = true # registry['username'] = "registry" # registry['group'] = "registry" # registry['uid'] = nil # registry['gid'] = nil # registry['dir'] = "/var/opt/gitlab/registry" # registry['registry_http_addr'] = "localhost:5000" # registry['debug_addr'] = "localhost:5001" # registry['log_directory'] = "/var/log/gitlab/registry" # registry['log_level'] = "info" # registry['rootcertbundle'] = "/var/opt/gitlab/registry/certificate.crt" # registry['storage_delete_enabled'] = true ### Registry backend storage ###! Docs: https://docs.gitlab.com/ce/administration/container_registry.html#container-registry-storage-driver # registry['storage'] = { # 's3' => { # 'accesskey' => 'AKIAKIAKI', # 'secretkey' => 'secret123', # 'bucket' => 'gitlab-registry-bucket-AKIAKIAKI' # } # } ### Registry notifications endpoints # registry['notifications'] = [ # { # 'name' => 'test_endpoint', # 'url' => 'https://gitlab.example.com/notify2', # 'timeout' => '500ms', # 'threshold' => 5, # 'backoff' => '1s', # 'headers' => { # "Authorization" => ["AUTHORIZATION_EXAMPLE_TOKEN"] # } # } # ] ### Default registry notifications # registry['default_notifications_timeout'] = "500ms" # registry['default_notifications_threshold'] = 5 # registry['default_notifications_backoff'] = "1s" # registry['default_notifications_headers'] = {} ################################################################################ ## GitLab Workhorse ##! Docs: https://gitlab.com/gitlab-org/gitlab-workhorse/blob/master/README.md ################################################################################ # gitlab_workhorse['enable'] = true # gitlab_workhorse['ha'] = false # gitlab_workhorse['listen_network'] = "unix" # gitlab_workhorse['listen_umask'] = 000 # gitlab_workhorse['listen_addr'] = "/var/opt/gitlab/gitlab-workhorse/socket" # gitlab_workhorse['auth_backend'] = "http://localhost:8080" ##! the empty string is the default in gitlab-workhorse option parser # gitlab_workhorse['auth_socket'] = "''" ##! put an empty string on the command line # gitlab_workhorse['pprof_listen_addr'] = "''" ##! put an empty string on the command line # gitlab_workhorse['prometheus_listen_addr'] = "''" # gitlab_workhorse['dir'] = "/var/opt/gitlab/gitlab-workhorse" # gitlab_workhorse['log_directory'] = "/var/log/gitlab/gitlab-workhorse" # gitlab_workhorse['proxy_headers_timeout'] = "1m0s" ##! limit number of concurrent API requests, defaults to 0 which is unlimited # gitlab_workhorse['api_limit'] = 0 ##! limit number of API requests allowed to be queued, defaults to 0 which ##! disables queuing # gitlab_workhorse['api_queue_limit'] = 0 ##! duration after which we timeout requests if they sit too long in the queue # gitlab_workhorse['api_queue_duration'] = "30s" ##! Long polling duration for job requesting for runners # gitlab_workhorse['api_ci_long_polling_duration'] = "60s" # gitlab_workhorse['env'] = { # 'PATH' => "/opt/gitlab/bin:/opt/gitlab/embedded/bin:/bin:/usr/bin" # } ################################################################################ ## GitLab User Settings ##! Modify default git user. ##! Docs: https://docs.gitlab.com/omnibus/settings/configuration.html#changing-the-name-of-the-git-user-group ################################################################################ # user['username'] = "git" # user['group'] = "git" # user['uid'] = nil # user['gid'] = nil ##! The shell for the git user # user['shell'] = "/bin/sh" ##! The home directory for the git user # user['home'] = "/var/opt/gitlab" # user['git_user_name'] = "GitLab" user['git_user_email'] = "614350682@qq.com" ################################################################################ ## GitLab Unicorn ##! Tweak unicorn settings. ##! Docs: https://docs.gitlab.com/omnibus/settings/unicorn.html ################################################################################ # unicorn['worker_timeout'] = 60 ###! Minimum worker_processes is 2 at this moment ###! See https://gitlab.com/gitlab-org/gitlab-ce/issues/18771 # unicorn['worker_processes'] = 2 ### Advanced settings # unicorn['listen'] = '127.0.0.1' # unicorn['port'] = 8080 # unicorn['socket'] = '/var/opt/gitlab/gitlab-rails/sockets/gitlab.socket' # unicorn['pidfile'] = '/opt/gitlab/var/unicorn/unicorn.pid' # unicorn['tcp_nopush'] = true # unicorn['backlog_socket'] = 1024 ###! **Make sure somaxconn is equal or higher then backlog_socket** # unicorn['somaxconn'] = 1024 ###! **We do not recommend changing this setting** # unicorn['log_directory'] = "/var/log/gitlab/unicorn" ### **Only change these settings if you understand well what they mean** ###! Docs: https://about.gitlab.com/2015/06/05/how-gitlab-uses-unicorn-and-unicorn-worker-killer/ ###! https://github.com/kzk/unicorn-worker-killer # unicorn['worker_memory_limit_min'] = "400 * 1 << 20" # unicorn['worker_memory_limit_max'] = "650 * 1 << 20" ################################################################################ ## GitLab Sidekiq ################################################################################ # sidekiq['log_directory'] = "/var/log/gitlab/sidekiq" # sidekiq['shutdown_timeout'] = 4 # sidekiq['concurrency'] = 25 ################################################################################ ## gitlab-shell ################################################################################ # gitlab_shell['audit_usernames'] = false # gitlab_shell['log_level'] = 'INFO' # gitlab_shell['http_settings'] = { user: 'username', password: 'password', ca_file: '/etc/ssl/cert.pem', ca_path: '/etc/pki/tls/certs', self_signed_cert: false} # gitlab_shell['log_directory'] = "/var/log/gitlab/gitlab-shell/" # gitlab_shell['custom_hooks_dir'] = "/opt/gitlab/embedded/service/gitlab-shell/hooks" # gitlab_shell['auth_file'] = "/var/opt/gitlab/.ssh/authorized_keys" ### Git trace log file. ###! If set, git commands receive GIT_TRACE* environment variables ###! Docs: https://git-scm.com/book/es/v2/Git-Internals-Environment-Variables#Debugging ###! An absolute path starting with / – the trace output will be appended to ###! that file. It needs to exist so we can check permissions and avoid ###! throwing warnings to the users. # gitlab_shell['git_trace_log_file'] = "/var/log/gitlab/gitlab-shell/gitlab-shell-git-trace.log" ##! **We do not recommend changing this directory.** # gitlab_shell['dir'] = "/var/opt/gitlab/gitlab-shell" ################################################################ ## GitLab PostgreSQL ################################################################ ###! Changing any of these settings requires a restart of postgresql. ###! By default, reconfigure reloads postgresql if it is running. If you ###! change any of these settings, be sure to run `gitlab-ctl restart postgresql` ###! after reconfigure in order for the changes to take effect. # postgresql['enable'] = true # postgresql['listen_address'] = nil # postgresql['port'] = 5432 # postgresql['data_dir'] = "/var/opt/gitlab/postgresql/data" ##! **recommend value is 1/4 of total RAM, up to 14GB.** # postgresql['shared_buffers'] = "256MB" ### Advanced settings # postgresql['ha'] = false # postgresql['dir'] = "/var/opt/gitlab/postgresql" # postgresql['log_directory'] = "/var/log/gitlab/postgresql" # postgresql['username'] = "gitlab-psql" # postgresql['uid'] = nil # postgresql['gid'] = nil # postgresql['shell'] = "/bin/sh" # postgresql['home'] = "/var/opt/gitlab/postgresql" # postgresql['user_path'] = "/opt/gitlab/embedded/bin:/opt/gitlab/bin:$PATH" # postgresql['sql_user'] = "gitlab" # postgresql['max_connections'] = 200 # postgresql['md5_auth_cidr_addresses'] = [] # postgresql['trust_auth_cidr_addresses'] = [] # postgresql['wal_buffers'] = "-1" # postgresql['autovacuum_max_workers'] = "3" # postgresql['autovacuum_freeze_max_age'] = "200000000" # postgresql['track_activity_query_size'] = "1024" # postgresql['shared_preload_libraries'] = nil # postgresql['dynamic_shared_memory_type'] = nil # postgresql['hot_standby'] = "off" ### Replication settings ###! Note, some replication settings do not require a full restart. They are documented below. # postgresql['wal_level'] = "hot_standby" # postgresql['max_wal_senders'] = 5 # postgresql['max_replication_slots'] = 0 # postgresql['max_locks_per_transaction'] = 128 # Backup/Archive settings # default['gitlab']['postgresql']['archive_mode'] = "off" ###! Changing any of these settings only requires a reload of postgresql. You do not need to ###! restart postgresql if you change any of these and run reconfigure. # postgresql['work_mem'] = "16MB" # postgresql['maintenance_work_mem'] = "16MB" # postgresql['checkpoint_segments'] = 10 # postgresql['checkpoint_timeout'] = "5min" # postgresql['checkpoint_completion_target'] = 0.9 # postgresql['checkpoint_warning'] = "30s" # postgresql['effective_cache_size'] = "1MB" # postgresql['shmmax'] = 17179869184 # or 4294967295 # postgresql['shmall'] = 4194304 # or 1048575 # postgresql['autovacuum'] = "on" # postgresql['log_autovacuum_min_duration'] = "-1" # postgresql['autovacuum_naptime'] = "1min" # postgresql['autovacuum_vacuum_threshold'] = "50" # postgresql['autovacuum_analyze_threshold'] = "50" # postgresql['autovacuum_vacuum_scale_factor'] = "0.02" # postgresql['autovacuum_analyze_scale_factor'] = "0.01" # postgresql['autovacuum_vacuum_cost_delay'] = "20ms" # postgresql['autovacuum_vacuum_cost_limit'] = "-1" # postgresql['statement_timeout'] = "60000" # postgresql['idle_in_transaction_session_timeout'] = "60000" # postgresql['log_line_prefix'] = "%a" ### Available in PostgreSQL 9.6 and later # postgresql['min_wal_size'] = 80MB # postgresql['max_wal_size'] = 1GB # Backup/Archive settings # default['gitlab']['postgresql']['archive_command'] = nil # default['gitlab']['postgresql']['archive_timeout'] = "60" ### Replication settings # postgresql['sql_replication_user'] = "gitlab_replicator" # postgresql['wal_keep_segments'] = 10 # postgresql['max_standby_archive_delay'] = "30s" # postgresql['max_standby_streaming_delay'] = "30s" # postgresql['synchronous_commit'] = on # postgresql['synchronous_standby_names'] = '' # postgresql['hot_standby_feedback'] = 'off' # postgresql['random_page_cost'] = 2.0 # postgresql['log_temp_files'] = -1 # postgresql['log_checkpoints'] = 'off' # To add custom entries to pg_hba.conf use the following # postgresql['custom_pg_hba_entries'] = { # APPLICATION: { # APPLICATION should identify what the settings are used for # type: example, # database: example, # user: example, # cidr: example, # method: example, # option: exmple # } # } # See https://www.postgresql.org/docs/9.6/static/auth-pg-hba-conf.html for an explanation # of the values ################################################################################ ## GitLab Redis ##! **Can be disabled if you are using your own Redis instance.** ##! Docs: https://docs.gitlab.com/omnibus/settings/redis.html ################################################################################ # redis['enable'] = true # redis['username'] = "gitlab-redis" # redis['maxclients'] = "10000" # redis['tcp_timeout'] = "60" # redis['tcp_keepalive'] = "300" # redis['uid'] = nil # redis['gid'] = nil ###! **To enable only Redis service in this machine, uncomment ###! one of the lines below (choose master or slave instance types).** ###! Docs: https://docs.gitlab.com/omnibus/settings/redis.html ###! https://docs.gitlab.com/ce/administration/high_availability/redis.html # redis_master_role['enable'] = true # redis_slave_role['enable'] = true ### Redis TCP support (will disable UNIX socket transport) # redis['bind'] = '0.0.0.0' # or specify an IP to bind to a single one # redis['port'] = 6379 # redis['password'] = 'redis-password-goes-here' ### Redis Sentinel support ###! **You need a master slave Redis replication to be able to do failover** ###! **Please read the documentation before enabling it to understand the ###! caveats:** ###! Docs: https://docs.gitlab.com/ce/administration/high_availability/redis.html ### Replication support #### Slave Redis instance # redis['master'] = false # by default this is true #### Slave and Sentinel shared configuration ####! **Both need to point to the master Redis instance to get replication and ####! heartbeat monitoring** # redis['master_name'] = 'gitlab-redis' # redis['master_ip'] = nil # redis['master_port'] = 6379 ####! **Master password should have the same value defined in ####! redis['password'] to enable the instance to transition to/from ####! master/slave in a failover event.** # redis['master_password'] = 'redis-password-goes-here' ####! Increase these values when your slaves can't catch up with master # redis['client_output_buffer_limit_normal'] = '0 0 0' # redis['client_output_buffer_limit_slave'] = '256mb 64mb 60' # redis['client_output_buffer_limit_pubsub'] = '32mb 8mb 60' ################################################################################ ## GitLab Web server ##! Docs: https://docs.gitlab.com/omnibus/settings/nginx.html#using-a-non-bundled-web-server ################################################################################ ##! When bundled nginx is disabled we need to add the external webserver user to ##! the GitLab webserver group. # web_server['external_users'] = [] # web_server['username'] = 'gitlab-www' # web_server['group'] = 'gitlab-www' # web_server['uid'] = nil # web_server['gid'] = nil # web_server['shell'] = '/bin/false' # web_server['home'] = '/var/opt/gitlab/nginx' ################################################################################ ## GitLab NGINX ##! Docs: https://docs.gitlab.com/omnibus/settings/nginx.html ################################################################################ # nginx['enable'] = true # nginx['client_max_body_size'] = '250m' # nginx['redirect_http_to_https'] = false # nginx['redirect_http_to_https_port'] = 80 ##! Most root CA's are included by default # nginx['ssl_client_certificate'] = "/etc/gitlab/ssl/ca.crt" ##! enable/disable 2-way SSL client authentication # nginx['ssl_verify_client'] = "off" ##! if ssl_verify_client on, verification depth in the client certificates chain # nginx['ssl_verify_depth'] = "1" # nginx['ssl_certificate'] = "/etc/gitlab/ssl/#{node['fqdn']}.crt" # nginx['ssl_certificate_key'] = "/etc/gitlab/ssl/#{node['fqdn']}.key" # nginx['ssl_ciphers'] = "ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256" # nginx['ssl_prefer_server_ciphers'] = "on" ##! **Recommended by: https://raymii.org/s/tutorials/Strong_SSL_Security_On_nginx.html ##! https://cipherli.st/** # nginx['ssl_protocols'] = "TLSv1.1 TLSv1.2" ##! **Recommended in: https://nginx.org/en/docs/http/ngx_http_ssl_module.html** # nginx['ssl_session_cache'] = "builtin:1000 shared:SSL:10m" ##! **Default according to https://nginx.org/en/docs/http/ngx_http_ssl_module.html** # nginx['ssl_session_timeout'] = "5m" # nginx['ssl_dhparam'] = nil # Path to dhparams.pem, eg. /etc/gitlab/ssl/dhparams.pem # nginx['listen_addresses'] = ['*', '[::]'] ##! **Defaults to forcing web browsers to always communicate using only HTTPS** ##! Docs: https://docs.gitlab.com/omnibus/settings/nginx.html#setting-http-strict-transport-security # nginx['hsts_max_age'] = 31536000 # nginx['hsts_include_subdomains'] = false ##! **Override only if you use a reverse proxy** ##! Docs: https://docs.gitlab.com/omnibus/settings/nginx.html#setting-the-nginx-listen-port # nginx['listen_port'] = nil ##! **Override only if your reverse proxy internally communicates over HTTP** ##! Docs: https://docs.gitlab.com/omnibus/settings/nginx.html#supporting-proxied-ssl # nginx['listen_https'] = nil # nginx['custom_gitlab_server_config'] = "location ^~ /foo-namespace/bar-project/raw/ { deny all; } " # nginx['custom_nginx_config'] = "include /etc/nginx/conf.d/example.conf;" # nginx['proxy_read_timeout'] = 3600 # nginx['proxy_connect_timeout'] = 300 # nginx['proxy_set_headers'] = { # "Host" => "$http_host_with_default", # "X-Real-IP" => "$remote_addr", # "X-Forwarded-For" => "$proxy_add_x_forwarded_for", # "X-Forwarded-Proto" => "https", # "X-Forwarded-Ssl" => "on", # "Upgrade" => "$http_upgrade", # "Connection" => "$connection_upgrade" # } # nginx['proxy_cache_path'] = 'proxy_cache keys_zone=gitlab:10m max_size=1g levels=1:2' # nginx['proxy_cache'] = 'gitlab' # nginx['http2_enabled'] = true # nginx['real_ip_trusted_addresses'] = [] # nginx['real_ip_header'] = nil # nginx['real_ip_recursive'] = nil # nginx['custom_error_pages'] = { # '404' => { # 'title' => 'Example title', # 'header' => 'Example header', # 'message' => 'Example message' # } # } ### Advanced settings # nginx['dir'] = "/var/opt/gitlab/nginx" # nginx['log_directory'] = "/var/log/gitlab/nginx" # nginx['worker_processes'] = 4 # nginx['worker_connections'] = 10240 # nginx['log_format'] = '$remote_addr - $remote_user [$time_local] "$request" $status $body_bytes_sent "$http_referer" "$http_user_agent"' # nginx['sendfile'] = 'on' # nginx['tcp_nopush'] = 'on' # nginx['tcp_nodelay'] = 'on' # nginx['gzip'] = "on" # nginx['gzip_http_version'] = "1.0" # nginx['gzip_comp_level'] = "2" # nginx['gzip_proxied'] = "any" # nginx['gzip_types'] = [ "text/plain", "text/css", "application/x-javascript", "text/xml", "application/xml", "application/xml+rss", "text/javascript", "application/json" ] # nginx['keepalive_timeout'] = 65 # nginx['cache_max_size'] = '5000m' # nginx['server_names_hash_bucket_size'] = 64 ### Nginx status # nginx['status'] = { # "enable" => true, # "listen_addresses" => ["127.0.0.1"], # "fqdn" => "dev.example.com", # "port" => 9999, # "options" => { # "stub_status" => "on", # Turn on stats # "server_tokens" => "off", # Don't show the version of NGINX # "access_log" => "off", # Disable logs for stats # "allow" => "127.0.0.1", # Only allow access from localhost # "deny" => "all" # Deny access to anyone else # } # } ################################################################################ ## GitLab Logging ##! Docs: https://docs.gitlab.com/omnibus/settings/logs.html ################################################################################ # logging['svlogd_size'] = 200 * 1024 * 1024 # rotate after 200 MB of log data # logging['svlogd_num'] = 30 # keep 30 rotated log files # logging['svlogd_timeout'] = 24 * 60 * 60 # rotate after 24 hours # logging['svlogd_filter'] = "gzip" # compress logs with gzip # logging['svlogd_udp'] = nil # transmit log messages via UDP # logging['svlogd_prefix'] = nil # custom prefix for log messages # logging['logrotate_frequency'] = "daily" # rotate logs daily # logging['logrotate_size'] = nil # do not rotate by size by default # logging['logrotate_rotate'] = 30 # keep 30 rotated logs # logging['logrotate_compress'] = "compress" # see 'man logrotate' # logging['logrotate_method'] = "copytruncate" # see 'man logrotate' # logging['logrotate_postrotate'] = nil # no postrotate command by default # logging['logrotate_dateformat'] = nil # use date extensions for rotated files rather than numbers e.g. a value of "-%Y-%m-%d" would give rotated files like production.log-2016-03-09.gz ### UDP log forwarding ##! Docs: http://docs.gitlab.com/omnibus/settings/logs.html#udp-log-forwarding ##! remote host to ship log messages to via UDP # logging['udp_log_shipping_host'] = nil ##! override the hostname used when logs are shipped via UDP, ## by default the system hostname will be used. # logging['udp_log_shipping_hostname'] = nil ##! remote port to ship log messages to via UDP # logging['udp_log_shipping_port'] = 514 ################################################################################ ## Logrotate ##! Docs: https://docs.gitlab.com/omnibus/settings/logs.html#logrotate ##! You can disable built in logrotate feature. ################################################################################ # logrotate['enable'] = true ################################################################################ ## Users and groups accounts ##! Disable management of users and groups accounts. ##! **Set only if creating accounts manually** ##! Docs: https://docs.gitlab.com/omnibus/settings/configuration.html#disable-user-and-group-account-management ################################################################################ # manage_accounts['enable'] = false ################################################################################ ## Storage directories ##! Disable managing storage directories ##! Docs: https://docs.gitlab.com/omnibus/settings/configuration.html#disable-storage-directories-management ################################################################################ ##! **Set only if the select directories are created manually** # manage_storage_directories['enable'] = false # manage_storage_directories['manage_etc'] = false ################################################################################ ## Runtime directory ##! Docs: https://docs.gitlab.com//omnibus/settings/configuration.html#configuring-runtime-directory ################################################################################ # runtime_dir '/run' ################################################################################ ## Git ##! Advanced setting for configuring git system settings for omnibus-gitlab ##! internal git ################################################################################ ##! For multiple options under one header use array of comma separated values, ##! eg.: ##! { "receive" => ["fsckObjects = true"], "alias" => ["st = status", "co = checkout"] } # omnibus_gitconfig['system'] = { # "pack" => ["threads = 1"], # "receive" => ["fsckObjects = true"], # "repack" => ["writeBitmaps = true"], # "transfer" => ["hideRefs=^refs/tmp/", "hideRefs=^refs/keep-around/"], # } ################################################################################ ## GitLab Pages ##! Docs: https://docs.gitlab.com/ce/pages/administration.html ################################################################################ ##! Define to enable GitLab Pages # pages_external_url "http://pages.example.com/" # gitlab_pages['enable'] = false ##! Configure to expose GitLab Pages on external IP address, serving the HTTP # gitlab_pages['external_http'] = [] ##! Configure to expose GitLab Pages on external IP address, serving the HTTPS # gitlab_pages['external_https'] = [] # gitlab_pages['listen_proxy'] = "localhost:8090" # gitlab_pages['redirect_http'] = true # gitlab_pages['use_http2'] = true # gitlab_pages['dir'] = "/var/opt/gitlab/gitlab-pages" # gitlab_pages['log_directory'] = "/var/log/gitlab/gitlab-pages" ##! Prometheus metrics for Pages docs: https://gitlab.com/gitlab-org/gitlab-pages/#enable-prometheus-metrics # gitlab_pages['metrics_address'] = ":9235" ################################################################################ ## GitLab Pages NGINX ################################################################################ # All the settings defined in the "GitLab Nginx" section are also available in this "GitLab Pages NGINX" section # You just have to change the key "nginx['some_settings']" with "pages_nginx['some_settings']" # Below you can find settings that are exclusive to "GitLab Pages NGINX" # pages_nginx['enable'] = false # gitlab_rails['pages_path'] = "/mnt/storage/pages" ################################################################################ ## GitLab CI ##! Docs: https://docs.gitlab.com/ce/ci/quick_start/README.html ################################################################################ # gitlab_ci['gitlab_ci_all_broken_builds'] = true # gitlab_ci['gitlab_ci_add_pusher'] = true # gitlab_ci['builds_directory'] = '/var/opt/gitlab/gitlab-ci/builds' ################################################################################ ## GitLab Mattermost ##! Docs: https://docs.gitlab.com/omnibus/gitlab-mattermost ################################################################################ # mattermost_external_url 'http://mattermost.example.com' # mattermost['enable'] = false # mattermost['username'] = 'mattermost' # mattermost['group'] = 'mattermost' # mattermost['uid'] = nil # mattermost['gid'] = nil # mattermost['home'] = '/var/opt/gitlab/mattermost' # mattermost['database_name'] = 'mattermost_production' # mattermost['env'] = {} # mattermost['service_use_ssl'] = false # mattermost['service_address'] = "127.0.0.1" # mattermost['service_port'] = "8065" # mattermost['service_site_url'] = nil # mattermost['service_maximum_login_attempts'] = 10 # mattermost['service_google_developer_key'] = nil # mattermost['service_enable_incoming_webhooks'] = true # mattermost['service_enable_post_username_override'] = true # mattermost['service_enable_post_icon_override'] = true # mattermost['service_enable_testing'] = false # mattermost['service_enable_security_fix_alert'] = true # mattermost['service_enable_insecure_outgoing_connections'] = false # mattermost['service_allowed_untrusted_internal_connections'] = "" # mattermost['service_allow_cors_from'] = "" # mattermost['service_enable_outgoing_webhooks'] = true # mattermost['service_enable_commands'] = true # mattermost['service_enable_custom_emoji'] = false # mattermost['service_enable_only_admin_integrations'] = true # mattermost['service_enable_oauth_service_provider'] = false # mattermost['service_enable_developer'] = false # mattermost['service_session_length_web_in_days'] = 30 # mattermost['service_session_length_mobile_in_days'] = 30 # mattermost['service_session_length_sso_in_days'] = 30 # mattermost['service_session_cache_in_minutes'] = 10 # mattermost['service_connection_security'] = nil # mattermost['service_tls_cert_file'] = nil # mattermost['service_tls_key_file'] = nil # mattermost['service_use_lets_encrypt'] = false # mattermost['service_lets_encrypt_cert_cache_file'] = "./config/letsencrypt.cache" # mattermost['service_forward_80_to_443'] = false # mattermost['service_read_timeout'] = 300 # mattermost['service_write_timeout'] = 300 # mattermost['service_time_between_user_typing_updates_milliseconds'] = 5000 # mattermost['service_enable_link_previews'] = false # mattermost['service_enable_user_typing_messages'] = true # mattermost['service_enable_post_search'] = true # mattermost['service_enable_user_statuses'] = true # mattermost['service_enable_emoji_picker'] = true # mattermost['service_enable_channel_viewed_messages'] = true # mattermost['service_enable_apiv3'] = true # mattermost['service_goroutine_health_threshold'] = -1 # mattermost['service_user_access_tokens'] = false # mattermost['team_site_name'] = "GitLab Mattermost" # mattermost['team_max_users_per_team'] = 150 # mattermost['team_enable_team_creation'] = true # mattermost['team_enable_user_creation'] = true # mattermost['team_enable_open_server'] = false # mattermost['team_allow_public_link'] = true # mattermost['team_allow_valet_default'] = false # mattermost['team_restrict_creation_to_domains'] = "gmail.com" # mattermost['team_restrict_team_names'] = true # mattermost['team_restrict_direct_message'] = "any" # mattermost['team_max_channels_per_team'] = 2000 # mattermost['team_enable_x_to_leave_channels_from_lhs'] = false # mattermost['team_user_status_away_timeout'] = 300 # mattermost['team_teammate_name_display'] = "full_name" # mattermost['sql_driver_name'] = 'mysql' # mattermost['sql_data_source'] = "mmuser:mostest@tcp(dockerhost:3306)/mattermost_test?charset=utf8mb4,utf8" # mattermost['sql_data_source_replicas'] = ["mmuser:mostest@tcp(dockerhost:3306)/mattermost_test?charset=utf8mb4,utf8"] # mattermost['sql_max_idle_conns'] = 10 # mattermost['sql_max_open_conns'] = 10 # mattermost['sql_trace'] = false # mattermost['sql_data_source_search_replicas'] = [] # mattermost['sql_query_timeout'] = 30 # mattermost['log_file_directory'] = '/var/log/gitlab/mattermost/' # mattermost['log_console_enable'] = true # mattermost['log_console_level'] = 'INFO' # mattermost['log_enable_file'] = false # mattermost['log_file_level'] = 'INFO' # mattermost['log_file_format'] = nil # mattermost['log_enable_diagnostics'] = true # mattermost['gitlab_enable'] = false # mattermost['gitlab_id'] = "12345656" # mattermost['gitlab_secret'] = "123456789" # mattermost['gitlab_scope'] = "" # mattermost['gitlab_auth_endpoint'] = "http://gitlab.example.com/oauth/authorize" # mattermost['gitlab_token_endpoint'] = "http://gitlab.example.com/oauth/token" # mattermost['gitlab_user_api_endpoint'] = "http://gitlab.example.com/api/v4/user" # mattermost['aws'] = {'S3AccessKeyId' => '123', 'S3SecretAccessKey' => '123', 'S3Bucket' => 'aa', 'S3Region' => 'bb'} # mattermost['email_enable_sign_up_with_email'] = true # mattermost['email_enable_sign_in_with_email'] = true # mattermost['email_enable_sign_in_with_username'] = false # mattermost['email_send_email_notifications'] = false # mattermost['email_require_email_verification'] = false # mattermost['email_smtp_username'] = nil # mattermost['email_smtp_password'] = nil # mattermost['email_smtp_server'] = nil # mattermost['email_smtp_port'] = nil # mattermost['email_connection_security'] = nil # mattermost['email_feedback_name'] = nil # mattermost['email_feedback_email'] = nil # mattermost['email_feedback_organization'] = nil # mattermost['email_send_push_notifications'] = true # mattermost['email_push_notification_server'] = "" # mattermost['email_push_notification_contents'] = "generic" # mattermost['email_enable_batching'] = false # mattermost['email_batching_buffer_size'] = 256 # mattermost['email_batching_interval'] = 30 # mattermost['email_skip_server_certificate_verification'] = false # mattermost['email_smtp_auth'] = false # mattermost['email_notification_content_type'] = "full" # mattermost['file_max_file_size'] = 52428800 # mattermost['file_driver_name'] = "local" # mattermost['file_directory'] = "/var/opt/gitlab/mattermost/data" # mattermost['file_enable_public_link'] = true # mattermost['file_initial_font'] = 'luximbi.ttf' # mattermost['file_amazon_s3_access_key_id'] = nil # mattermost['file_amazon_s3_bucket'] = nil # mattermost['file_amazon_s3_secret_access_key'] = nil # mattermost['file_amazon_s3_region'] = nil # mattermost["file_amazon_s3_endpoint"] = nil # mattermost["file_amazon_s3_bucket_endpoint"] = nil # mattermost["file_amazon_s3_location_constraint"] = false # mattermost["file_amazon_s3_lowercase_bucket"] = false # mattermost["file_amazon_s3_ssl"] = true # mattermost["file_amazon_s3_sign_v2"] = false # mattermost['file_enable_file_attachments'] = true # mattermost["file_amazon_s3_trace"] = false # mattermost['ratelimit_enable_rate_limiter'] = false # mattermost['ratelimit_per_sec'] = 10 # mattermost['ratelimit_memory_store_size'] = 10000 # mattermost['ratelimit_vary_by_remote_addr'] = true # mattermost['ratelimit_vary_by_header'] = nil # mattermost['ratelimit_max_burst'] = 100 # mattermost['support_terms_of_service_link'] = "/static/help/terms.html" # mattermost['support_privacy_policy_link'] = "/static/help/privacy.html" # mattermost['support_about_link'] = "/static/help/about.html" # mattermost['support_report_a_problem_link'] = "/static/help/report_problem.html" # mattermost['support_email'] = "support@example.com" # mattermost['privacy_show_email_address'] = true # mattermost['privacy_show_full_name'] = true # mattermost['localization_server_locale'] = "en" # mattermost['localization_client_locale'] = "en" # mattermost['localization_available_locales'] = "en,es,fr,ja,pt-BR" # mattermost['webrtc_enable'] = false # mattermost['webrtc_gateway_websocket_url'] = nil # mattermost['webrtc_gateway_admin_url'] = nil # mattermost['webrtc_gateway_admin_secret'] = nil # mattermost['webrtc_gateway_stun_uri'] = nil # mattermost['webrtc_gateway_turn_uri'] = nil # mattermost['webrtc_gateway_turn_username'] = nil # mattermost['webrtc_gateway_turn_shared_key'] = nil ################################################################################ ## Mattermost NGINX ################################################################################ # All the settings defined in the "GitLab NGINX" section are also available in this "Mattermost NGINX" section # You just have to change the key "nginx['some_settings']" with "mattermost_nginx['some_settings']" # Below you can find settings that are exclusive to "Mattermost NGINX" # mattermost_nginx['enable'] = false # mattermost_nginx['custom_gitlab_mattermost_server_config'] = "location ^~ /foo-namespace/bar-project/raw/ { deny all; } " # mattermost_nginx['proxy_set_headers'] = { # "Host" => "$http_host", # "X-Real-IP" => "$remote_addr", # "X-Forwarded-For" => "$proxy_add_x_forwarded_for", # "X-Frame-Options" => "SAMEORIGIN", # "X-Forwarded-Proto" => "https", # "X-Forwarded-Ssl" => "on", # "Upgrade" => "$http_upgrade", # "Connection" => "$connection_upgrade" # } ################################################################################ ## Registry NGINX ################################################################################ # All the settings defined in the "GitLab NGINX" section are also available in this "Registry NGINX" section # You just have to change the key "nginx['some_settings']" with "registry_nginx['some_settings']" # Below you can find settings that are exclusive to "Registry NGINX" # registry_nginx['enable'] = false # registry_nginx['proxy_set_headers'] = { # "Host" => "$http_host", # "X-Real-IP" => "$remote_addr", # "X-Forwarded-For" => "$proxy_add_x_forwarded_for", # "X-Forwarded-Proto" => "https", # "X-Forwarded-Ssl" => "on" # } ################################################################################ ## Prometheus ##! Docs: https://docs.gitlab.com/ce/administration/monitoring/prometheus/ ################################################################################ # prometheus['enable'] = true # prometheus['monitor_kubernetes'] = true # prometheus['username'] = 'gitlab-prometheus' # prometheus['uid'] = nil # prometheus['gid'] = nil # prometheus['shell'] = '/bin/sh' # prometheus['home'] = '/var/opt/gitlab/prometheus' # prometheus['log_directory'] = '/var/log/gitlab/prometheus' # prometheus['scrape_interval'] = 15 # prometheus['scrape_timeout'] = 15 # prometheus['chunk_encoding_version'] = 2 # ### Custom scrape configs # # Prometheus can scrape additional jobs via scrape_configs. The default automatically # includes all of the exporters supported by the omnibus config. # # See: https://prometheus.io/docs/operating/configuration/#<scrape_config> # # Example: # # prometheus['scrape_configs'] = [ # { # 'job_name': 'example', # 'static_configs' => [ # 'targets' => ['hostname:port'], # ], # }, # ] # ### Prometheus Memory Management # # Prometheus needs to be configured for how much memory is used. # * This sets the target heap size. # * This value accounts for approximately 2/3 of the memory used by the server. # * The recommended memory is 4kb per unique metrics time-series. # See: https://prometheus.io/docs/operating/storage/#memory-usage # # prometheus['target_heap_size'] = ( # # Use 25mb + 2% of total memory for Prometheus memory. # 26_214_400 + (node['memory']['total'].to_i * 1024 * 0.02 ) # ).to_i # # prometheus['flags'] = { # 'storage.local.path' => "#{node['gitlab']['prometheus']['home']}/data", # 'storage.local.chunk-encoding-version' => user_config['chunk-encoding-version'], # 'storage.local.target-heap-size' => node['gitlab']['prometheus']['target-heap-size'], # 'config.file' => "#{node['gitlab']['prometheus']['home']}/prometheus.yml" # } ##! Advanced settings. Should be changed only if absolutely needed. # prometheus['listen_address'] = 'localhost:9090' ################################################################################ ## Prometheus Node Exporter ##! Docs: https://docs.gitlab.com/ce/administration/monitoring/prometheus/node_exporter.html ################################################################################ # node_exporter['enable'] = true # node_exporter['home'] = '/var/opt/gitlab/node-exporter' # node_exporter['log_directory'] = '/var/log/gitlab/node-exporter' # node_exporter['flags'] = { # 'collector.textfile.directory' => "#{node['gitlab']['node-exporter']['home']}/textfile_collector" # } ##! Advanced settings. Should be changed only if absolutely needed. # node_exporter['listen_address'] = 'localhost:9100' ################################################################################ ## Prometheus Redis exporter ##! Docs: https://docs.gitlab.com/ce/administration/monitoring/prometheus/redis_exporter.html ################################################################################ # redis_exporter['enable'] = true # redis_exporter['log_directory'] = '/var/log/gitlab/redis-exporter' # redis_exporter['flags'] = { # 'redis.addr' => "unix://#{node['gitlab']['gitlab-rails']['redis_socket']}", # } ##! Advanced settings. Should be changed only if absolutely needed. # redis_exporter['listen_address'] = 'localhost:9121' ################################################################################ ## Prometheus Postgres exporter ##! Docs: https://docs.gitlab.com/ce/administration/monitoring/prometheus/postgres_exporter.html ################################################################################ # postgres_exporter['enable'] = true # postgres_exporter['home'] = '/var/opt/gitlab/postgres-exporter' # postgres_exporter['log_directory'] = '/var/log/gitlab/postgres-exporter' # postgres_exporter['flags'] = {} # postgres_exporter['listen_address'] = 'localhost:9187' ################################################################################ ## Prometheus Gitlab monitor ##! Docs: https://docs.gitlab.com/ce/administration/monitoring/prometheus/gitlab_monitor_exporter.html ################################################################################ # gitlab_monitor['enable'] = true # gitlab_monitor['log_directory'] = "/var/log/gitlab/gitlab-monitor" # gitlab_monitor['home'] = "/var/opt/gitlab/gitlab-monitor" ##! Advanced settings. Should be changed only if absolutely needed. # gitlab_monitor['listen_address'] = 'localhost' # gitlab_monitor['listen_port'] = '9168' # To completely disable prometheus, and all of it's exporters, set to false # prometheus_monitoring['enable'] = true ################################################################################ ## Gitaly ##! Docs: ################################################################################ # gitaly['enable'] = false # gitaly['dir'] = "/var/opt/gitlab/gitaly" # gitaly['log_directory'] = "/var/log/gitlab/gitaly" # gitaly['bin_path'] = "/opt/gitlab/embedded/bin/gitaly" # gitaly['env_directory'] = "/opt/gitlab/etc/gitaly" # gitaly['env'] = { # 'PATH' => "/opt/gitlab/bin:/opt/gitlab/embedded/bin:/bin:/usr/bin", # 'HOME' => '/var/opt/gitlab' # } # gitaly['socket_path'] = "/var/opt/gitlab/gitaly/gitaly.socket" # gitaly['listen_addr'] = "localhost:8075" # gitaly['prometheus_listen_addr'] = "localhost:9175" # gitaly['logging_format'] = "json" # gitaly['logging_sentry_dsn'] = "https://<key>:<secret>@sentry.io/<project>" # gitaly['prometheus_grpc_latency_buckets'] = "[0.001, 0.005, 0.025, 0.1, 0.5, 1.0, 10.0, 30.0, 60.0, 300.0, 1500.0]" # gitaly['auth_token'] = '<secret>' # gitaly['auth_transitioning'] = false # When true, auth is logged to Prometheus but NOT enforced ################################################################################ ################################################################################ ## Configuration Settings for GitLab EE only ## ################################################################################ ################################################################################ ################################################################################ ## Auxiliary cron jobs applicable to GitLab EE only ################################################################################ # # gitlab_rails['geo_file_download_dispatch_worker_cron'] = "*/10 * * * *" # gitlab_rails['geo_repository_sync_worker_cron'] = "*/5 * * * *" # gitlab_rails['ldap_sync_worker_cron'] = "30 1 * * *" # gitlab_rails['ldap_group_sync_worker_cron'] = "0 * * * *" # gitlab_rails['historical_data_worker_cron'] = "0 12 * * *" ################################################################################ ## Kerberos (EE Only) ##! Docs: https://docs.gitlab.com/ee/integration/kerberos.html#http-git-access ################################################################################ # gitlab_rails['kerberos_enabled'] = true # gitlab_rails['kerberos_keytab'] = /etc/http.keytab # gitlab_rails['kerberos_service_principal_name'] = HTTP/gitlab.example.com@EXAMPLE.COM # gitlab_rails['kerberos_use_dedicated_port'] = true # gitlab_rails['kerberos_port'] = 8443 # gitlab_rails['kerberos_https'] = true ################################################################################ ## GitLab Sentinel (EE Only) ##! Docs: http://docs.gitlab.com/ce/administration/high_availability/redis.html#high-availability-with-sentinel ################################################################################ ##! **Make sure you configured all redis['master_*'] keys above before ##! continuing.** ##! To enable Sentinel and disable all other services in this machine, ##! uncomment the line below (if you've enabled Redis role, it will keep it). ##! Docs: https://docs.gitlab.com/ce/administration/high_availability/redis.html # redis_sentinel_role['enable'] = true # sentinel['enable'] = true ##! Bind to all interfaces, uncomment to specify an IP and bind to a single one # sentinel['bind'] = '0.0.0.0' ##! Uncomment to change default port # sentinel['port'] = 26379 ##! Quorum must reflect the amount of voting sentinels it take to start a ##! failover. ##! **Value must NOT be greater then the amount of sentinels.** ##! The quorum can be used to tune Sentinel in two ways: ##! 1. If a the quorum is set to a value smaller than the majority of Sentinels ##! we deploy, we are basically making Sentinel more sensible to master ##! failures, triggering a failover as soon as even just a minority of ##! Sentinels is no longer able to talk with the master. ##! 2. If a quorum is set to a value greater than the majority of Sentinels, we ##! are making Sentinel able to failover only when there are a very large ##! number (larger than majority) of well connected Sentinels which agree ##! about the master being down. # sentinel['quorum'] = 1 ### Consider unresponsive server down after x amount of ms. # sentinel['down_after_milliseconds'] = 10000 ### Specifies the failover timeout in milliseconds. ##! It is used in many ways: ##! ##! - The time needed to re-start a failover after a previous failover was ##! already tried against the same master by a given Sentinel, is two ##! times the failover timeout. ##! ##! - The time needed for a slave replicating to a wrong master according ##! to a Sentinel current configuration, to be forced to replicate ##! with the right master, is exactly the failover timeout (counting since ##! the moment a Sentinel detected the misconfiguration). ##! ##! - The time needed to cancel a failover that is already in progress but ##! did not produced any configuration change (SLAVEOF NO ONE yet not ##! acknowledged by the promoted slave). ##! ##! - The maximum time a failover in progress waits for all the slaves to be ##! reconfigured as slaves of the new master. However even after this time ##! the slaves will be reconfigured by the Sentinels anyway, but not with ##! the exact parallel-syncs progression as specified. # sentinel['failover_timeout'] = 60000 ################################################################################ ## GitLab Sidekiq Cluster (EE only) ################################################################################ ##! GitLab Enterprise Edition allows one to start an extra set of Sidekiq processes ##! besides the default one. These processes can be used to consume a dedicated set ##! of queues. This can be used to ensure certain queues always have dedicated ##! workers, no matter the amount of jobs that need to be processed. # sidekiq_cluster['enable'] = false # sidekiq_cluster['ha'] = false # sidekiq_cluster['log_directory'] = "/var/log/gitlab/sidekiq-cluster" # sidekiq_cluster['interval'] = 5 # The number of seconds to wait between worker checks ##! Each entry in the queue_groups array denotes a group of queues that have to be processed by a ##! Sidekiq process. Multiple queues can be processed by the same process by ##! separating them with a comma within the group entry # sidekiq_cluster['queue_groups'] = [ # "process_commit,post_receive", # "gitlab_shell" # ] # ##! If negate is enabled then sidekiq-cluster will process all the queues that ##! don't match those in queue_groups. # sidekiq_cluster['negate'] = false ################################################################################ ## Additional Database Settings (EE only) ##! Docs: https://docs.gitlab.com/ee/administration/database_load_balancing.html ################################################################################ # gitlab_rails['db_load_balancing'] = { 'hosts' => ['secondary1.example.com'] } ################################################################################ ## GitLab Geo ##! Docs: https://docs.gitlab.com/ee/gitlab-geo ################################################################################ # geo_primary_role['enable'] = false # geo_secondary_role['enable'] = false ################################################################################ ## GitLab Geo Secondary (EE only) ################################################################################ # geo_secondary['auto_migrate'] = true # geo_secondary['db_adapter'] = "postgresql" # geo_secondary['db_encoding'] = "unicode" # geo_secondary['db_collation'] = nil # geo_secondary['db_database'] = "gitlabhq_geo_production" # geo_secondary['db_pool'] = 10 # geo_secondary['db_username'] = "gitlab_geo" # geo_secondary['db_password'] = nil # geo_secondary['db_host'] = "/var/opt/gitlab/geo-postgresql" # geo_secondary['db_port'] = 5431 # geo_secondary['db_socket'] = nil # geo_secondary['db_sslmode'] = nil # geo_secondary['db_sslrootcert'] = nil # geo_secondary['db_sslca'] = nil ################################################################################ ## GitLab Geo Secondary Tracking Database (EE only) ################################################################################ # geo_postgresql['enable'] = false # geo_postgresql['ha'] = false # geo_postgresql['dir'] = '/var/opt/gitlab/geo-postgresql' # geo_postgresql['data_dir'] = '/var/opt/gitlab/geo-postgresql/data' ################################################################################ # Pgbouncer (EE only) # See [GitLab PgBouncer documentation](http://docs.gitlab.com/omnibus/settings/database.html#enabling-pgbouncer-ee-only) # See the [PgBouncer page](https://pgbouncer.github.io/config.html) for details ################################################################################ # pgbouncer['enable'] = false # pgbouncer['log_directory'] = '/var/log/gitlab/pgbouncer' # pgbouncer['data_directory'] = '/var/opt/gitlab/pgbouncer' # pgbouncer['listen_addr'] = '0.0.0.0' # pgbouncer['listen_port'] = '6432' # pgbouncer['pool_mode'] = 'session' # pgbouncer['server_reset_query'] = 'DISCARD ALL' # pgbouncer['max_client_conn'] = '100' # pgbouncer['default_pool_size'] = '20' # pgbouncer['min_pool_size'] = '0' # pgbouncer['reserve_pool_size'] = '0' # pgbouncer['reserve_pool_timeout'] = '5.0' # pgbouncer['server_round_robin'] = '0' # pgbouncer['log_connections'] = '0' # pgbouncer['server_idle_timeout'] = '600.0' # pgbouncer['dns_max_ttl'] = '15.0' # pgbouncer['dns_zone_check_period'] = '0' # pgbouncer['dns_nxdomain_ttl'] = '15.0' # pgbouncer['admin_users'] = %w(gitlab-psql postgres pgbouncer) # pgbouncer['stats_users'] = %w(gitlab-psql postgres pgbouncer) # pgbouncer['ignore_startup_parameters'] = 'extra_float_digits' # pgbouncer['databases'] = { # DATABASE_NAME: { # host: HOSTNAME, # port: PORT # user: USERNAME, # password: PASSWORD ###! generate this with `echo -n '$password + $username' | md5sum` # } # ... # } # pgbouncer['logfile'] = nil # pgbouncer['auth_type'] = 'md5' # pgbouncer['auth_hba_file'] = nil # pgbouncer['auth_query'] = 'SELECT username, password FROM public.pg_shadow_lookup($1)' # pgbouncer['users'] = [ # { # name: USERNAME, # password: MD5_PASSWORD_HASH # } # ] # postgresql['pgbouncer_user'] = nil # postgresql['pgbouncer_user_password'] = nil # ################################################################################ # Repmgr (EE only) ################################################################################ # repmgr['enable'] = false # repmgr['cluster'] = 'gitlab_cluster' # repmgr['database'] = 'gitlab_repmgr' # repmgr['host'] = nil # repmgr['node_number'] = nil # repmgr['port'] = 5432 # repmgr['trust_auth_cidr_addresses'] = [] # repmgr['user'] = 'gitlab_repmgr' # repmgr['failover'] = 'automatic' # repmgr['log_directory'] = '/var/log/gitlab/repmgrd' # repmgr['node_name'] = nil # repmgr['pg_bindir'] = '/opt/gitlab/embedded/bin' # repmgr['service_start_command'] = '/opt/gitlab/bin/gitlab-ctl start postgresql' # repmgr['service_stop_command'] = '/opt/gitlab/bin/gitlab-ctl stop postgresql' # repmgr['service_reload_command'] = '/opt/gitlab/bin/gitlab-ctl hup postgresql' # repmgr['service_restart_command'] = '/opt/gitlab/bin/gitlab-ctl restart postgresql' # repmgr['service_promote_command'] = nil # repmgr['promote_command'] = '/opt/gitlab/embedded/bin/repmgr standby promote -f /var/opt/gitlab/postgresql/repmgr.conf' # repmgr['follow_command'] = '/opt/gitlab/embedded/bin/repmgr standby follow -f /var/opt/gitlab/postgresql/repmgr.conf' # repmgr['upstream_node'] = nil # repmgr['use_replication_slots'] = false # repmgr['loglevel'] = 'INFO' # repmgr['logfacility'] = 'STDERR' # repmgr['logfile'] = nil # repmgr['event_notification_command'] = nil # repmgr['event_notifications'] = nil # repmgr['rsync_options'] = nil # repmgr['ssh_options'] = nil # repmgr['priority'] = nil # repmgr['retry_promote_interval_secs'] = 300 # repmgr['witness_repl_nodes_sync_interval_secs'] = 15 # repmgr['reconnect_attempts'] = 6 # repmgr['reconnect_interval'] = 10 # repmgr['monitor_interval_secs'] = 2 # repmgr['master_response_timeout'] = 60 # repmgr['daemon'] = true # repmgrd['enable'] = true ################################################################################ # Consul (EEP only) ################################################################################ # consul['enable'] = false # consul['dir'] = '/var/opt/gitlab/consul' # consul['user'] = 'gitlab-consul' # consul['config_file'] = '/var/opt/gitlab/consul/config.json' # consul['config_dir'] = '/var/opt/gitlab/consul/config.d' # consul['data_dir'] = '/var/opt/gitlab/consul/data' # consul['log_directory'] = '/var/log/gitlab/consul' # consul['script_directory'] = '/var/opt/gitlab/consul/scripts' # consul['configuration'] = { # 'client_addr' => nil, # 'datacenter' => 'gitlab_consul', # 'enable_script_checks' => true, # 'server' => false # } # consul['services'] = [] # consul['service_config'] = { # 'postgresql' => { # 'service' => { # 'name' => "postgresql", # 'address' => '', # 'port' => 5432, # 'checks' => [ # { # 'script' => "/var/opt/gitlab/consul/scripts/check_postgresql", # 'interval' => "10s" # } # ] # } # } # } # consul['watchers'] = { # 'postgresql' => { # enable: false, # handler: 'failover_pgbouncer' # } # }
二、常错误示范
form
#gitlab_rails['gitlab_email_from'] = '614350682@qq.com' //邮箱@qq.com配置gitlab的发信人 #user['git_user_email'] = "614350682@qq.com" //邮箱@qq.com #这两个必须配置