docker网络管理

查看docker支持的网络驱动

[root@localhost ~]# docker info |grep "Network"
WARNING: bridge-nf-call-iptables is disabled
WARNING: bridge-nf-call-ip6tables is disabled
  Network: bridge host macvlan null overlay

解决上面WARNING问题

vim /etc/sysctl.conf

.....

net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-arptables = 1

 docker所支持的所有网络驱动

1、bridge：docker默认的网络模式，当docker进程启动之后，宿主机上会创建一个docker0的虚拟网桥，同主机启动的容器会连接到这个虚拟网桥上，从docker0子网中分配一个IP给容器使用，并把docker0当作它的网关;

2、host：使用host网络模式时，该容器并不会获得独立的network namespace而是和主机共用一个，直接使用主机的IP和端口，所以网络隔离性并不是很好，但是文件系统和进程等还是和主机隔离。

3、container模式：和已存在的容器共享一个network namespace，创建时不会创建自己的网卡、IP等，而是和启动时指定的一个容器共享IP、端口等，也就是说容器之间没有网络隔离；

4、macvlan：Macvlan网络允许您为容器分配MAC地址，使其显示为网络上的物理设备。Docker守护程序通过其MAC地址将流量路由到容器。macvlan 在处理期望直接连接到物理网络的传统应用程序时，使用驱动程序有时是最佳选择，而不是通过Docker主机的网络堆栈进行路由。

5、none：对于此容器，禁用所有网络，不对容器进行任何网络配置，只有lo本地回环，没有其他网卡。--network=none来设置，none不适用于群组服务。

 bridge

[root@web2 ~]# docker run -it --name br --rm busybox
/ # ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
8: eth0@if9: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue 
    link/ether 02:42:ac:11:00:03 brd ff:ff:ff:ff:ff:ff
    inet 172.17.0.3/16 brd 172.17.255.255 scope global eth0
       valid_lft forever preferred_lft forever
/ # 

另一个终端重起一个容器测试

 说明默认的bridge网络可以和宿主机和其他容器之间进行通信

host

[root@web2 ~]# docker run -it --name h1 --network=host --rm busybox
/ # ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:0c:29:06:37:3e brd ff:ff:ff:ff:ff:ff
    inet 192.168.53.8/24 brd 192.168.53.255 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe06:373e/64 scope link 
       valid_lft forever preferred_lft forever
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue qlen 1000
    link/ether 52:54:00:24:97:33 brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 qlen 1000
    link/ether 52:54:00:24:97:33 brd ff:ff:ff:ff:ff:ff
5: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue 
    link/ether 02:42:99:02:5c:9f brd ff:ff:ff:ff:ff:ff
    inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
       valid_lft forever preferred_lft forever
    inet6 fe80::42:99ff:fe02:5c9f/64 scope link 
       valid_lft forever preferred_lft forever
7: vetha0bcff7@if6: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue master docker0 
    link/ether a2:8a:b0:d7:14:67 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::a08a:b0ff:fed7:1467/64 scope link 
       valid_lft forever preferred_lft forever
/ # echo "<h1>hello</h1>" > /tmp/index.html　　　　　　　###在容器上开启80端口宿主机查看访问
/ # httpd -h /tmp/
/ # 

  container

终端1
[root@web2 ~]# docker run -it --name c1 --rm busybox
/ # ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
12: eth0@if13: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue 
    link/ether 02:42:ac:11:00:03 brd ff:ff:ff:ff:ff:ff
    inet 172.17.0.3/16 brd 172.17.255.255 scope global eth0
       valid_lft forever preferred_lft forever
/ # 

终端2
[root@web2 ~]# docker container run -it --name c2 --network=container:c1 --rm busybox
/ # ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
12: eth0@if13: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue 
    link/ether 02:42:ac:11:00:03 brd ff:ff:ff:ff:ff:ff
    inet 172.17.0.3/16 brd 172.17.255.255 scope global eth0
       valid_lft forever preferred_lft forever

 

 none

[root@web2 ~]# docker run -it --name n1 --network=none --rm busybox
/ # ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
/ #

用户自定义网络

[root@web2 ~]# docker network create -d macvlan --gateway 192.168.53.1 --subnet 192.168.53.0/24 my_net
ebce8ca4e07aab20c0b3594c981c2c647e48faddd0e166dd33618fb256a8ee5b
[root@web2 ~]# docker network ls
NETWORK ID          NAME                DRIVER              SCOPE
d8662ca85d00        bridge              bridge              local
42561d5708e2        host                host                local
ebce8ca4e07a        my_net              macvlan             local
cb5f9c520285        none                null                local

-d　　加载模块名

--gateway　　指定网段所在网关

--subnet　　指定网段

-o　　指定继承网段的网卡