通过Keepalived实现Redis Failover自动故障切换功能

通过Keepalived实现Redis Failover自动故障切换功能[实践分享]

 

参考资料：

http://patrick-tang.blogspot.com/2012/06/redis-keepalived-failover-system.html

http://deidara.blog.51cto.com/400447/302402

目前，Redis还没有一个类似于MySQL Proxy或Oracle RAC的官方HA方案。
Redis作者有一个名为Redis Sentinel的计划(http://redis.io/topics/sentinel)，据称将会有监控，报警和自动故障转移三大功能，非常不错。
但可惜的是短期内恐怕还不能开发完成。

因此，如何在出现故障时自动转移是一个需要解决的问题。

通过对网上一些资料的搜索，有建议采用HAProxy或Keepalived来实现的，事实上如果是做Failover而非负载均衡的话，Keepalived的效率肯定是超过HAProxy的，所以我决定采用Keepalived的方案。

环境介绍：
Master: 10.6.1.143
Slave: 10.6.1.144
Virtural IP Address (VIP): 10.6.1.200

设计思路：
当 Master 与 Slave 均运作正常时, Master负责服务，Slave负责Standby；
当 Master 挂掉，Slave 正常时, Slave接管服务，同时关闭主从复制功能；
当 Master 恢复正常，则从Slave同步数据，同步数据之后关闭主从复制功能，恢复Master身份，于此同时Slave等待Master同步数据完成之后，恢复Slave身份。
然后依次循环。

需要注意的是，这样做需要在Master与Slave上都开启本地化策略，否则在互相自动切换的过程中，未开启本地化的一方会将另一方的数据清空，造成数据完全丢失。

下面，是具体的实施步骤：

在Master和Slave上安装Keepalived
$ sudo apt-get install keepalived

修改Master和Slave的/etc/hosts文件
$ sudo vim /etc/hosts

127.0.0.1 localhost 10.6.1.143 redis 10.6.1.144 redis-slave

默认安装完成keepalived之后是没有配置文件的，因此我们需要手动创建：

首先，在Master上创建如下配置文件：
$ sudo vim /etc/keepalived/keepalived.conf

vrrp_script chk_redis { script "/etc/keepalived/scripts/redis_check.sh" ###监控脚本 interval 2 ###监控时间 } vrrp_instance VI_1 { state MASTER ###设置为MASTER interface eth0 ###监控网卡 virtual_router_id 51 priority 101 ###权重值 authentication { auth_type PASS ###加密 auth_pass redis ###密码 } track_script { chk_redis ###执行上面定义的chk_redis } virtual_ipaddress { 10.6.1.200 ###VIP } notify_master /etc/keepalived/scripts/redis_master.sh notify_backup /etc/keepalived/scripts/redis_backup.sh notify_fault /etc/keepalived/scripts/redis_fault.sh notify_stop /etc/keepalived/scripts/redis_stop.sh }

然后，在Slave上创建如下配置文件：
$ sudo vim /etc/keepalived/keepalived.conf

vrrp_script chk_redis { script "/etc/keepalived/scripts/redis_check.sh" ###监控脚本 interval 2 ###监控时间 } vrrp_instance VI_1 { state BACKUP ###设置为BACKUP interface eth0 ###监控网卡 virtual_router_id 51 priority 100 ###比MASTRE权重值低 authentication { auth_type PASS auth_pass redis ###密码与MASTRE相同 } track_script { chk_redis ###执行上面定义的chk_redis } virtual_ipaddress { 10.6.1.200 ###VIP } notify_master /etc/keepalived/scripts/redis_master.sh notify_backup /etc/keepalived/scripts/redis_backup.sh notify_fault /etc/keepalived/scripts/redis_fault.sh notify_stop /etc/keepalived/scripts/redis_stop.sh }

在Master和Slave上创建监控Redis的脚本
$ sudo mkdir /etc/keepalived/scripts
$ sudo vim /etc/keepalived/scripts/redis_check.sh

#!/bin/bash ALIVE=`/opt/redis/bin/redis-cli PING` if [ "$ALIVE" == "PONG" ]; then echo $ALIVE exit 0 else echo $ALIVE exit 1 fi

编写以下负责运作的关键脚本：
notify_master /etc/keepalived/scripts/redis_master.sh
notify_backup /etc/keepalived/scripts/redis_backup.sh
notify_fault /etc/keepalived/scripts/redis_fault.sh
notify_stop /etc/keepalived/scripts/redis_stop.sh

因为Keepalived在转换状态时会依照状态来呼叫：
当进入Master状态时会呼叫notify_master
当进入Backup状态时会呼叫notify_backup
当发现异常情况时进入Fault状态呼叫notify_fault
当Keepalived程序终止时则呼叫notify_stop

首先，在Redis Master上创建notity_master与notify_backup脚本：
$ sudo vim /etc/keepalived/scripts/redis_master.sh

#!/bin/bash REDISCLI="/opt/redis/bin/redis-cli" LOGFILE="/var/log/keepalived-redis-state.log" echo "[master]" >> $LOGFILE date >> $LOGFILE echo "Being master...." >> $LOGFILE 2>&1 echo "Run SLAVEOF cmd ..." >> $LOGFILE $REDISCLI SLAVEOF 10.6.1.144 6379 >> $LOGFILE 2>&1 sleep 10 #延迟10秒以后待数据同步完成后再取消同步状态 echo "Run SLAVEOF NO ONE cmd ..." >> $LOGFILE $REDISCLI SLAVEOF NO ONE >> $LOGFILE 2>&1

$ sudo vim /etc/keepalived/scripts/redis_backup.sh

#!/bin/bash REDISCLI="/opt/redis/bin/redis-cli" LOGFILE="/var/log/keepalived-redis-state.log" echo "[backup]" >> $LOGFILE date >> $LOGFILE echo "Being slave...." >> $LOGFILE 2>&1 sleep 15 #延迟15秒待数据被对方同步完成之后再切换主从角色 echo "Run SLAVEOF cmd ..." >> $LOGFILE $REDISCLI SLAVEOF 10.6.1.144 6379 >> $LOGFILE 2>&1

接着，在Redis Slave上创建notity_master与notify_backup脚本：

$ sudo vim /etc/keepalived/scripts/redis_master.sh

#!/bin/bash REDISCLI="/opt/redis/bin/redis-cli" LOGFILE="/var/log/keepalived-redis-state.log" echo "[master]" >> $LOGFILE date >> $LOGFILE echo "Being master...." >> $LOGFILE 2>&1 echo "Run SLAVEOF cmd ..." >> $LOGFILE $REDISCLI SLAVEOF 10.6.1.143 6379 >> $LOGFILE 2>&1 sleep 10 #延迟10秒以后待数据同步完成后再取消同步状态 echo "Run SLAVEOF NO ONE cmd ..." >> $LOGFILE $REDISCLI SLAVEOF NO ONE >> $LOGFILE 2>&1

$ sudo vim /etc/keepalived/scripts/redis_backup.sh

#!/bin/bash REDISCLI="/opt/redis/bin/redis-cli" LOGFILE="/var/log/keepalived-redis-state.log" echo "[backup]" >> $LOGFILE date >> $LOGFILE echo "Being slave...." >> $LOGFILE 2>&1 sleep 15 #延迟15秒待数据被对方同步完成之后再切换主从角色 echo "Run SLAVEOF cmd ..." >> $LOGFILE $REDISCLI SLAVEOF 10.6.1.143 6379 >> $LOGFILE 2>&1

然后在Master与Slave创建如下相同的脚本：
$ sudo vim /etc/keepalived/scripts/redis_fault.sh

#!/bin/bash LOGFILE=/var/log/keepalived-redis-state.log echo "[fault]" >> $LOGFILE date >> $LOGFILE

$ sudo vim /etc/keepalived/scripts/redis_stop.sh

#!/bin/bash LOGFILE=/var/log/keepalived-redis-state.log echo "[stop]" >> $LOGFILE date >> $LOGFILE

给脚本都加上可执行权限：
$ sudo chmod +x /etc/keepalived/scripts/*.sh

脚本创建完成以后，我们开始按照如下流程进行测试：
1.启动Master上的Redis
$ sudo /etc/init.d/redis start

2.启动Slave上的Redis
$ sudo /etc/init.d/redis start

3.启动Master上的Keepalived
$ sudo /etc/init.d/keepalived start

4.启动Slave上的Keepalived
$ sudo /etc/init.d/keepalived start

5.尝试通过VIP连接Redis:
$ redis-cli -h 10.6.1.200 INFO

连接成功，Slave也连接上来了。
role:master
slave0:10.6.1.144,6379,online

6.尝试插入一些数据：
$ redis-cli -h 10.6.1.200 SET Hello Redis
OK

从VIP读取数据
$ redis-cli -h 10.6.1.200 GET Hello
"Redis"

从Master读取数据
$ redis-cli -h 10.6.1.143 GET Hello
"Redis"

从Slave读取数据
$ redis-cli -h 10.6.1.144 GET Hello
"Redis"

下面，模拟故障产生：
将Master上的Redis进程杀死：
$ sudo killall -9 redis-server

查看Master上的Keepalived日志
$ tailf /var/log/keepalived-redis-state.log
[fault]
Thu Sep 27 08:29:01 CST 2012

同时Slave上的日志显示：
$ tailf /var/log/keepalived-redis-state.log
[master]
Fri Sep 28 14:14:09 CST 2012
Being master....
Run SLAVEOF cmd ...
OK
Run SLAVEOF NO ONE cmd ...
OK

然后我们可以发现，Slave已经接管服务，并且担任Master的角色了。
$ redis-cli -h 10.6.1.200 INFO
$ redis-cli -h 10.6.1.144 INFO
role:master

然后我们恢复Master的Redis进程
$ sudo /etc/init.d/redis start

查看Master上的Keepalived日志
$ tailf /var/log/keepalived-redis-state.log
[master]
Thu Sep 27 08:31:33 CST 2012
Being master....
Run SLAVEOF cmd ...
OK
Run SLAVEOF NO ONE cmd ...
OK

同时Slave上的日志显示：
$ tailf /var/log/keepalived-redis-state.log
[backup]
Fri Sep 28 14:16:37 CST 2012
Being slave....
Run SLAVEOF cmd ...
OK

可以发现目前的Master已经再次恢复了Master的角色，故障切换以及自动恢复都成功了

摘自：http://heylinux.com/archives/1942.html