zoukankan      html  css  js  c++  java
  • hdu4770 Lights Against Dudely

    Time Limit: 2000/1000 MS (Java/Others)    Memory Limit: 32768/32768 K (Java/Others)
    Total Submission(s): 2653    Accepted Submission(s): 795


    Problem Description
    Harry: "But Hagrid. How am I going to pay for all of this? I haven't any money." 
    Hagrid: "Well there's your money, Harry! Gringotts, the wizard bank! Ain't no safer place. Not one. Except perhaps Hogwarts." 
    — Rubeus Hagrid to Harry Potter. 
      Gringotts Wizarding Bank is the only bank of the wizarding world, and is owned and operated by goblins. It was created by a goblin called Gringott. Its main offices are located in the North Side of Diagon Alley in London, England. In addition to storing money and valuables for wizards and witches, one can go there to exchange Muggle money for wizarding money. The currency exchanged by Muggles is later returned to circulation in the Muggle world by goblins. According to Rubeus Hagrid, other than Hogwarts School of Witchcraft and Wizardry, Gringotts is the safest place in the wizarding world.
      The text above is quoted from Harry Potter Wiki. But now Gringotts Wizarding Bank is not safe anymore. The stupid Dudley, Harry Potter's cousin, just robbed the bank. Of course, uncle Vernon, the drill seller, is behind the curtain because he has the most advanced drills in the world. Dudley drove an invisible and soundless drilling machine into the bank, and stole all Harry Potter's wizarding money and Muggle money. Dumbledore couldn't stand with it. He ordered to put some magic lights in the bank rooms to detect Dudley's drilling machine. The bank can be considered as a N × M grid consisting of N × M rooms. Each room has a coordinate. The coordinates of the upper-left room is (1,1) , the down-right room is (N,M) and the room below the upper-left room is (2,1)..... A 3×4 bank grid is shown below:

      Some rooms are indestructible and some rooms are vulnerable. Dudely's machine can only pass the vulnerable rooms. So lights must be put to light up all vulnerable rooms. There are at most fifteen vulnerable rooms in the bank. You can at most put one light in one room. The light of the lights can penetrate the walls. If you put a light in room (x,y), it lights up three rooms: room (x,y), room (x-1,y) and room (x,y+1). Dumbledore has only one special light whose lighting direction can be turned by 0 degree,90 degrees, 180 degrees or 270 degrees. For example, if the special light is put in room (x,y) and its lighting direction is turned by 90 degrees, it will light up room (x,y), room (x,y+1 ) and room (x+1,y). Now please help Dumbledore to figure out at least how many lights he has to use to light up all vulnerable rooms.
      Please pay attention that you can't light up any indestructible rooms, because the goblins there hate light. 

     

    Input
      There are several test cases.
      In each test case:
      The first line are two integers N and M, meaning that the bank is a N × M grid(0<N,M <= 200).
      Then a N×M matrix follows. Each element is a letter standing for a room. '#' means a indestructible room, and '.' means a vulnerable room. 
      The input ends with N = 0 and M = 0
     

    Output
      For each test case, print the minimum number of lights which Dumbledore needs to put.
      If there are no vulnerable rooms, print 0.
      If Dumbledore has no way to light up all vulnerable rooms, print -1.
     

    Sample Input
    2 2 ## ## 2 3 #.. ..# 3 3 ### #.# ### 0 0
     

    Sample Output
    0 2 -1
     
    这题可以用状压的思想做,因为题目中说要照明的点的个数不超过15个,所以可以枚举所有情况,复杂度为4*15*(2^15)*10,是可以接受的。先枚举特殊的灯以及其放的位置,然后枚举其余灯放其他点的状态,看是否符合。

    #include<iostream>
    #include<stdio.h>
    #include<stdlib.h>
    #include<string.h>
    #include<vector>
    #include<map>
    #include<set>
    #include<queue>
    #include<stack>
    #include<string>
    #include<algorithm>
    using namespace std;
    typedef long long ll;
    #define inf 0x7fffffff
    #define maxn 205
    char gra[maxn][maxn],lit[maxn][maxn],vis[maxn][maxn];
    int a[30][5],c[30];
    int tot;
    
    int check()
    {
        int i,j,x,y;
        int flag=1;
        for(i=1;i<=tot;i++){
            x=a[i][0];
            y=a[i][1];
            if(lit[x][y])continue;
            else flag=0;
        }
        return flag;
    }
    
    
    int main()
    {
        int n,m,i,j,h,k;
        int x1,x2,x3,y1,y2,y3,x,y,now,xx1,xx2,yy1,yy2,xx,yy,s,zt;
        while(scanf("%d%d",&n,&m)!=EOF)
        {
            if(n==0 && m==0)break;
            tot=0;
            for(i=1;i<=n;i++){
                scanf("%s",gra[i]+1);
                for(j=1;j<=m;j++){
                    if(gra[i][j]=='.'){
                        tot++;
                        a[tot][0]=i;
                        a[tot][1]=j;
                        a[tot][2]=(1<<(tot-1) );
                    }
                }
    
            }
            if(tot==0){
                printf("0
    ");continue;
            }
            int ans=inf;
            for(h=1;h<=4;h++){
                for(k=1;k<=tot;k++){
                    for(i=1;i<=tot;i++){
                        vis[a[i][0] ][a[i][1]  ]=0;
                        lit[a[i][0] ][a[i][1]  ]=0;
                    }
                    x=a[k][0];
                    y=a[k][1];
                    if(h==1){
                        x1=x-1; y1=y;
                        x2=x;   y2=y+1;
                    }
                    else if(h==2){
                        x1=x+1; y1=y;
                        x2=x; y2=y+1;
                    }
                    else if(h==3){
                        x1=x+1; y1=y;
                        x2=x; y2=y-1;
    
                    }
                    else if(h==4){
                        x1=x-1; y1=y;
                        x2=x; y2=y-1 ;
                    }
    
    
                    if(x1>=1 && x1<=n && y1>=1 && y1<=m){
                        if(gra[x1][y1]=='#')continue;
                    }
                    if(x2>=1 && x2<=n && y2>=1 && y2<=m){
                        if(gra[x2][y2]=='#')continue;
                    }
                    vis[x][y]=1;lit[x][y]=1;
                    if(x1>=1 && x1<=n && y1>=1 && y1<=m){
                        lit[x1][y1]=1;
                    }
                    if(x2>=1 && x2<=n && y2>=1 && y2<=m){
                        lit[x2][y2]=1;
                    }
    
                    if(check()){
                        ans=min(ans,1);break;
                    }
    
                    for(zt=1;zt<=(1<<tot)-1;zt++){
                        int s=zt;
                        for(i=1;i<=tot;i++){
                            vis[a[i][0] ][a[i][1]  ]=0;
                            lit[a[i][0] ][a[i][1]  ]=0;
    
                        }
                        if(x1>=1 && x1<=n && y1>=1 && y1<=m){
                        if(gra[x1][y1]=='#')continue;
                        }
                        if(x2>=1 && x2<=n && y2>=1 && y2<=m){
                            if(gra[x2][y2]=='#')continue;
                        }
                        vis[x][y]=1;lit[x][y]=1;
                        if(x1>=1 && x1<=n && y1>=1 && y1<=m){
                            lit[x1][y1]=1;
                        }
                        if(x2>=1 && x2<=n && y2>=1 && y2<=m){
                            lit[x2][y2]=1;
                        }
                        if(s&(a[k][2] ))continue;
                        int wei=0;
                        int geshu=0;
                        while(s)
                        {
                            wei++;
                            c[wei]=s%2;
                            if(c[wei]==1)geshu++;
                            s/=2;
                        }
                        if(geshu+1>ans)continue;
                        int flag1=1;
                        for(i=1;i<=wei;i++){
                            if(c[i]==1){
                                xx=a[i][0];
                                yy=a[i][1];
                                xx1=xx-1;yy1=yy;
                                xx2=xx;yy2=yy+1;
                                if(xx1>=1 && xx1<=n && yy1>=1 && yy1<=m){
                                    if(gra[xx1][yy1]=='#'){
                                        flag1=0;break;
                                    }
                                }
                                if(xx2>=1 && xx2<=n && yy2>=1 && yy2<=m){
                                    if(gra[xx2][yy2]=='#'){
                                        flag1=0;break;
                                    }
                                }
                                vis[xx][yy]=1;lit[xx][yy]=1;
                                if(xx1>=1 && xx1<=n && yy1>=1 && yy1<=m){
                                    lit[xx1][yy1]=1;
                                }
                                if(xx2>=1 && xx2<=n && yy2>=1 && yy2<=m){
                                    lit[xx2][yy2]=1;
                                }
                            }
                        }
                        if(flag1){
                            if(check()){
                                ans=min(ans,geshu+1);
                            }
                        }
                    }
    
                }
                if(ans==1)break;
            }
            if(ans==inf)printf("-1
    ");
            else printf("%d
    ",ans);
        }
        return 0;
    }
    




  • 相关阅读:
    IOS开发中实现UITableView按照首字母将集合进行检索分组
    IOS开发中设置导航栏主题
    IOS中使用.xib文件封装一个自定义View
    IOS中将字典转成模型对象
    WindowsPhone8中LongListSelector的扩展解决其不能绑定SelectdeItem的问题
    WindowsPhone8.1 开发-- 二维码扫描
    tomcat 开机自启
    redis ubuntu 开机自启
    webStorm 中使用 supervisor 调试
    ubuntu 14.04 tab失效问题
  • 原文地址:https://www.cnblogs.com/herumw/p/9464613.html
Copyright © 2011-2022 走看看