zoukankan      html  css  js  c++  java
  • [redis] redis

    redis是什么?

    wiki

    redis官方介绍:introduction to redis

    安装:

    install 拉到最下面的install小节

    wget http://download.redis.io/releases/redis-4.0.11.tar.gz
    tar zxvf redis-4.0.11.tar.gz 
    cd redis-4.0.11
    make

    运行:

    [root@T9 redis-4.0.11]# ./src/redis-server 
    14015:C 12 Oct 15:17:21.602 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo
    14015:C 12 Oct 15:17:21.602 # Redis version=4.0.11, bits=64, commit=00000000, modified=0, pid=14015, just started
    14015:C 12 Oct 15:17:21.602 # Warning: no config file specified, using the default config. In order to specify a config file use ./src/redis-server /path/to/redis.conf
    14015:M 12 Oct 15:17:21.603 * Increased maximum number of open files to 10032 (it was originally set to 1024).
                    _._                                                  
               _.-``__ ''-._                                             
          _.-``    `.  `_.  ''-._           Redis 4.0.11 (00000000/0) 64 bit
      .-`` .-```.  ```/    _.,_ ''-._                                   
     (    '      ,       .-`  | `,    )     Running in standalone mode
     |`-._`-...-` __...-.``-._|'` _.-'|     Port: 6379
     |    `-._   `._    /     _.-'    |     PID: 14015
      `-._    `-._  `-./  _.-'    _.-'                                   
     |`-._`-._    `-.__.-'    _.-'_.-'|                                  
     |    `-._`-._        _.-'_.-'    |           http://redis.io        
      `-._    `-._`-.__.-'_.-'    _.-'                                   
     |`-._`-._    `-.__.-'    _.-'_.-'|                                  
     |    `-._`-._        _.-'_.-'    |                                  
      `-._    `-._`-.__.-'_.-'    _.-'                                   
          `-._    `-.__.-'    _.-'                                       
              `-._        _.-'                                           
                  `-.__.-'                                               
    
    14015:M 12 Oct 15:17:21.603 # WARNING: The TCP backlog setting of 511 cannot be enforced because /proc/sys/net/core/somaxconn is set to the lower value of 128.
    14015:M 12 Oct 15:17:21.603 # Server initialized
    14015:M 12 Oct 15:17:21.603 # WARNING overcommit_memory is set to 0! Background save may fail under low memory condition. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect.
    14015:M 12 Oct 15:17:21.603 # WARNING you have Transparent Huge Pages (THP) support enabled in your kernel. This will create latency and memory usage issues with Redis. To fix this issue run the command 'echo never > /sys/kernel/mm/transparent_hugepage/enabled' as root, and add it to your /etc/rc.local in order to retain the setting after a reboot. Redis must be restarted after THP is disabled.
    14015:M 12 Oct 15:17:21.604 * Ready to accept connections

    测试:

    [root@T9 redis-4.0.11]# ./src/redis-cli 
    127.0.0.1:6379> set foo bar
    OK
    127.0.0.1:6379> get foo
    "bar"
    127.0.0.1:6379> get bar
    (nil)
    127.0.0.1:6379> 

    tutorial

    <<The Little Redis Book>>

    The book is many years old, but still relevant. Redis has evolved a lot, but most of that has been in the form of internal improvements,
    new advanced features (like lua scripting) and awesome new data types. The best way to learn Redis is still to start by understanding
    the fundamentals presented in this book.

    读书笔记:

    [redis] <<The little Redis book>>的读书笔记

    其他内容摘要

    在cli上查看server状态

    127.0.0.1:6379> info
    # Server
    redis_version:4.0.11
    redis_git_sha1:00000000
    redis_git_dirty:0
    。。。 

    摘录:

    # 传统关系型数据库,用表,表示一切。
    If we were to apply this data structure concept to the relational world, we could say that databases expose a single data structure - tables.
    # redis,用五种基本数据结构。 To me, that defines Redis’ approach. If you are dealing with scalars, lists, hashes, or sets, why not store them
    as scalars, lists, hashes and sets?

    概念

    数据库

    用数字代表,默认是0。用select命令切换。如下:

    127.0.0.1:6379> select 1
    OK
    127.0.0.1:6379[1]> select 0
    OK
    127.0.0.1:6379> 

    关于K-V

    While Redis is more than just a key-value store, at its core, every one of Redis’ five data structures has at least a
    key and a value. 

    全部redis命令的详细列表

    https://redis.io/commands

    redis cluster的文档

    HA:https://redis.io/topics/sentinel

    https://redis.io/topics/cluster-tutorial

    https://redis.io/topics/cluster-spec

    创建redis cluster

    1. 创建配置文件

    [root@T9 cluster]# pwd
    /root/worklist/20181012-redis/cluster
    [root@T9 cluster]# cat redis.conf 
    port 7000
    cluster-enabled yes
    cluster-config-file nodes.conf
    cluster-node-timeout 5000
    appendonly yes
    [root@T9 cluster]# 

    2. 为6个实例创建配置文件

    [root@T9 cluster]# tree
    .
    ├── 7000
    │   └── redis.conf
    ├── 7001
    │   └── redis.conf
    ├── 7002
    │   └── redis.conf
    ├── 7003
    │   └── redis.conf
    ├── 7004
    │   └── redis.conf
    ├── 7005
    │   └── redis.conf

    3. 分别启动6个实例

    [root@T9 7000]# ../../redis-4.0.11/src/redis-server ./redis.conf

    4. 创建

    [root@T9 redis-4.0.11]# ./src/redis-cli --cluster create 127.0.0.1:7000 127.0.0.1:7001 127.0.0.1:7002 127.0.0.1:7003 127.0.0.1:7004 127.0.0.1:7005 --cluster-replicas 1
    Unrecognized option or bad number of args for: '--cluster'
    [root@T9 redis-4.0.11]# 

    创建没成功。 redis-cli不支持这个命令了,可能。

    看了create-cluster脚本,里边是这样的:

    [root@T9 redis-4.0.11]# ./src/redis-trib.rb create --replicas 1 127.0.0.1:7000 127.0.0.1:7001 127.0.0.1:7002 127.0.0.1:7003 127.0.0.1:7004 127.0.0.1:7005

    在此之前,还需要安装:

    yum install ruby
    yum install rubygem-redis

    上边的命令在5.0里也旧了。最新的写法是这样的(所以上边那两个ruby,其实也可以不装):

    redis-cli --cluster create 
    >         192.168.2.205:7000 192.168.2.205:7001 192.168.2.205:7002 192.168.2.205:7003 192.168.2.205:7004 192.168.2.205:7005 
    >         --cluster-replicas 1

    成功之后,master大概会打印这些东西:

    1838:M 16 Oct 16:45:32.268 # configEpoch set to 1 via CLUSTER SET-CONFIG-EPOCH
    1838:M 16 Oct 16:45:32.284 # IP address for this node updated to 127.0.0.1
    1838:M 16 Oct 16:45:37.224 # Cluster state changed: ok
    1838:M 16 Oct 16:45:37.551 * Slave 127.0.0.1:7003 asks for synchronization
    1838:M 16 Oct 16:45:37.551 * Partial resynchronization not accepted: Replication ID mismatch (Slave asked for '333d735fee630925f6cb26009980da7c036c1be1', my replication IDs are '0afc41e9ed8a0e316dbca9051ffa1c4bdcbab8dd' and '0000000000000000000000000000000000000000')
    1838:M 16 Oct 16:45:37.551 * Starting BGSAVE for SYNC with target: disk
    1838:M 16 Oct 16:45:37.553 * Background saving started by pid 2153
    2153:C 16 Oct 16:45:37.899 * DB saved on disk
    2153:C 16 Oct 16:45:37.902 * RDB: 8 MB of memory used by copy-on-write
    1838:M 16 Oct 16:45:37.980 * Background saving terminated with success
    1838:M 16 Oct 16:45:37.981 * Synchronization with slave 127.0.0.1:7003 succeeded

    slave会打印这些:

    1851:M 16 Oct 16:45:32.269 # configEpoch set to 4 via CLUSTER SET-CONFIG-EPOCH
    1851:M 16 Oct 16:45:32.292 # IP address for this node updated to 127.0.0.1
    1851:S 16 Oct 16:45:36.989 * Before turning into a slave, using my master parameters to synthesize a cached master: I may be able to synchronize with the new master with just a partial transfer.
    1851:S 16 Oct 16:45:36.989 # Cluster state changed: ok
    1851:S 16 Oct 16:45:37.548 * Connecting to MASTER 127.0.0.1:7000
    1851:S 16 Oct 16:45:37.548 * MASTER <-> SLAVE sync started
    1851:S 16 Oct 16:45:37.548 * Non blocking connect for SYNC fired the event.
    1851:S 16 Oct 16:45:37.549 * Master replied to PING, replication can continue...
    1851:S 16 Oct 16:45:37.550 * Trying a partial resynchronization (request 333d735fee630925f6cb26009980da7c036c1be1:1).
    1851:S 16 Oct 16:45:37.900 * Full resync from master: 28607c280e263eaefb803cc88f213822187e903f:0
    1851:S 16 Oct 16:45:37.900 * Discarding previously cached master state.
    1851:S 16 Oct 16:45:37.981 * MASTER <-> SLAVE sync: receiving 176 bytes from master
    1851:S 16 Oct 16:45:37.982 * MASTER <-> SLAVE sync: Flushing old data
    1851:S 16 Oct 16:45:38.008 * MASTER <-> SLAVE sync: Loading DB in memory
    1851:S 16 Oct 16:45:38.008 * MASTER <-> SLAVE sync: Finished with success
    1851:S 16 Oct 16:45:38.012 * Background append only file rewriting started by pid 2156
    1851:S 16 Oct 16:45:38.302 * AOF rewrite child asks to stop sending diffs.
    2156:C 16 Oct 16:45:38.302 * Parent agreed to stop sending diffs. Finalizing AOF...
    2156:C 16 Oct 16:45:38.302 * Concatenating 0.00 MB of AOF diff received from parent.
    2156:C 16 Oct 16:45:38.303 * SYNC append only file rewrite performed
    2156:C 16 Oct 16:45:38.304 * AOF rewrite: 8 MB of memory used by copy-on-write
    1851:S 16 Oct 16:45:38.330 * Background AOF rewrite terminated with success
    1851:S 16 Oct 16:45:38.330 * Residual parent diff successfully flushed to the rewritten AOF (0.00 MB)
    1851:S 16 Oct 16:45:38.331 * Background AOF rewrite finished successfully

    脚本最后会打印这个:

    [OK] All 16384 slots covered

    杀掉一个master

    它的slave会升成master

    1855:S 16 Oct 16:51:11.497 # Error condition on socket for SYNC: Connection refused
    1855:S 16 Oct 16:51:11.604 # Failover election won: I'm the new master.
    1855:S 16 Oct 16:51:11.605 # configEpoch set to 7 after successful failover
    1855:M 16 Oct 16:51:11.605 # Setting secondary replication ID to a7bc292355042d4c2344f8a84503a418775018f0, valid up to offset: 463. New replication ID is 1ac1b3a40de43eb7012840543e9e50200a948334
    1855:M 16 Oct 16:51:11.605 * Discarding previously cached master state.
    1855:M 16 Oct 16:51:11.605 # Cluster state changed: ok

    再启动这个master,它会变成slave

    再杀掉新的master,slave又会变回成master。

    5. shutdown

    [root@T9 redis-4.0.11]# ./src/redis-cli -p 7000 shutdown nosave
    [root@T9 redis-4.0.11]# ./src/redis-cli -p 7001 shutdown nosave
    [root@T9 redis-4.0.11]# ./src/redis-cli -p 7002 shutdown nosave
    [root@T9 redis-4.0.11]# ./src/redis-cli -p 7003 shutdown nosave
    [root@T9 redis-4.0.11]# ./src/redis-cli -p 7004 shutdown nosave
    [root@T9 redis-4.0.11]# ./src/redis-cli -p 7005 shutdown nosave

    使用脚本创建 redis cluster

    脚本:

    utils/create-cluster/create-cluster

    启动:

    [root@T9 create-cluster]# ./create-cluster start
    [root@T9 create-cluster]# ./create-cluster create
    [root@T9 create-cluster]# ./create-cluster stop

    使用:与非cluster的区别是使用-c参数。

    [root@T9 create-cluster]# ../../src/redis-cli -c -p 30001

    gossip协议

    https://www.jianshu.com/p/133560ef28df

    其他

    为什么redis cluster最小需要6个node?

    redis cluster tutorial中写道:

    Note that the minimal cluster that works as expected requires to contain at least three master nodes. For your first tests it is strongly suggested to start a six nodes cluster with three masters and three slaves.

    用四个节点(2 master,2 slave)测试失败,错误信息如下:

    [root@T9 20181012-redis]# ./redis-4.0.11/src/redis-trib.rb create --replicas 1 127.0.0.1:7000 127.0.0.1:7001 127.0.0.1:7002 127.0.0.1:7003
    >>> Creating cluster
    *** ERROR: Invalid configuration for cluster creation.
    *** Redis Cluster requires at least 3 master nodes.
    *** This is not possible with 4 nodes and 1 replicas per node.
    *** At least 6 nodes are required.
    [root@T9 20181012-redis]# 

    可能是为了防止脑裂吧?  https://grokbase.com/t/gg/redis-db/15cbatbypm/why-a-minimal-cluster-should-require-at-least-three-master-nodes

    用sentinel也是同理最少需要三个。

    在sentinel文档里看见的一句话,应该是可以简单的解释了这个问题:

    Note that we will never show setups where just two Sentinels are used, since Sentinels always need to talk with the majority in order to start a failover.

    另外,redis部署了集群的话,就不需要部署哨兵了。

    Cluster is only for when you need sharding.
    If you only want replication + failover use Sentinel (though you still
    need 3 hosts for the Sentinels)
  • 相关阅读:
    如何在for循环中使用多线程
    解决ios10以上H5页面手势、双击缩放问题
    select标签默认选项
    vue三级联动
    手动安装composer详细教学
    密码校验:长度6位以上,至少包含一个数字,一个大写字母,一个小写字母,不包含空格
    tp5生成6位不重复验证码
    css漂亮的阴影边框
    圆形进度条css3样式
    jQuery倒计时组件(jquery.downCount.js)
  • 原文地址:https://www.cnblogs.com/hugetong/p/9778098.html
Copyright © 2011-2022 走看看