2019 SDN上机第6次作业

2019 SDN上机第6次作业

1.实验拓扑

• 实验拓扑
  见2019 SDN上机第2次作业
• 要求
  使用Python脚本完成拓扑搭建，并连接ryu控制器。

2.使用Ryu的REST API下发流表实现和第2次实验同样的VLAN

• 参考资料
  REST API：可以在线学习中国大学MOOC 《软件定义网络》第六讲 北向接口
  Ryu控制器的API文档：ryu.app.ofctl_rest
  Ryu的拓扑展示
  助教博客：基于RYU restful api实现的VLAN网络虚拟化
• 要求
  编写脚本，一键执行下发流表。

3.对比两种方法，写出你的实验体会

1.实验拓扑

python 脚本如下

from mininet.topo import Topo
class MyTopo(Topo):

    def __init__(self):

        # initilaize topology
        Topo.__init__(self)

        # add hosts and switches
        h1 = self.addHost('h1')
        h2 = self.addHost('h2')
        h3 = self.addHost('h3')
        h4 = self.addHost('h4')
        h5 = self.addHost('h5')
        h6 = self.addHost('h6')
        s1 = self.addSwitch('s1')
        s2 = self.addSwitch('s2')

        # add links
        self.addLink(h1, s1, 1, 1)
        self.addLink(h2, s1, 1, 2)
        self.addLink(h3, s1, 1, 3)
        self.addLink(s1, s2, 4, 4)
        self.addLink(h4, s2, 1, 1)
        self.addLink(h5, s2, 1, 2)
        self.addLink(h6, s2, 1, 3)
        
topos = {'mytopo': (lambda: MyTopo())}

生成拓扑

sudo mn --custom 6.py --topo mytopo --controller=remote,ip=127.0.0.1,port=6633 --switch ovsk,protocols=OpenFlow13

输入命令连接ryu控制器

ryu-manager ofctl_rest.py

查看端口情况

2.使用Ryu的REST API下发流表实现和第2次实验同样的VLAN

先查看连接端口

编写的脚本：

#对于s1

#端口号1发来数据
curl -X POST -d '{
    "dpid": 1,    #对应s1
    "priority":1,
    "match":{
        "in_port":1
    },
    "actions":[
        {
            "type": "PUSH_VLAN",     # s1将从主机发来的数据包打上vlan_tag
            "ethertype": 33024       # 帧类型0x8100(=33024): 表示IEEE 802.1Q的VLAN数据帧
        },
        {
            "type": "SET_FIELD",
            "field": "vlan_vid",     # 设置VLAN ID
            "value": 4096            # 设置vlan_id的值
        },
        {
            "type": "OUTPUT",
            "port": 4
        }
    ]
}' http://127.0.0.1:8080/stats/flowentry/add

#端口号2发来数据
curl -X POST -d '{
    "dpid": 1,
    "priority":1,
    "match":{
        "in_port":2
    },
    "actions":[
        {
            "type": "PUSH_VLAN",     # s1将从主机发来的数据包打上vlan_tag
            "ethertype": 33024       # 帧类型0x8100(=33024): 表示IEEE 802.1Q的VLAN数据帧
        },
        {
            "type": "SET_FIELD",
            "field": "vlan_vid",     # 设置VLAN ID
            "value": 4097            # 设置vlan_id的值
        },
        {
            "type": "OUTPUT",
            "port": 4
        }
    ]
}' http://127.0.0.1:8080/stats/flowentry/add

#端口号3发来数据
curl -X POST -d '{
    "dpid": 1,
    "priority":1,
    "match":{
        "in_port":3
    },
    "actions":[
        {
            "type": "PUSH_VLAN",     # s1将从主机发来的数据包打上vlan_tag
            "ethertype": 33024       # 帧类型0x8100(=33024): 表示IEEE 802.1Q的VLAN数据帧
        },
        {
            "type": "SET_FIELD",
            "field": "vlan_vid",     # 设置VLAN ID
            "value": 4098            # 设置vlan_id的值
        },
        {
            "type": "OUTPUT",
            "port": 4
        }
    ]
}' http://127.0.0.1:8080/stats/flowentry/add



#向端口1转发
curl -X POST -d '{
    "dpid": 1,
    "priority":1,
    "match":{
        "vlan_vid": "0"        #注意openflow对应版本问题
    },
    "actions":[
        {
            "type": "POP_VLAN",     # 给进入交换机的包去除 vlan_tag
        },
        {
            "type": "OUTPUT",
            "port": 1
        }
    ]
}' http://localhost:8080/stats/flowentry/add

#向端口2转发
curl -X POST -d '{
    "dpid": 1,
    "priority":1,
    "match":{
        "vlan_vid": "1"
    },
    "actions":[
        {
            "type": "POP_VLAN",     # 给进入交换机的包去除 vlan_tag
        },
        {
            "type": "OUTPUT",
            "port": 2
        }
    ]
}' http://localhost:8080/stats/flowentry/add

#向端口3转发
curl -X POST -d '{
    "dpid": 1,
    "priority":1,
    "match":{
        "vlan_vid": "2"
    },
    "actions":[
        {
            "type": "POP_VLAN",     # 给进入交换机的包去除 vlan_tag
        },
        {
            "type": "OUTPUT",
            "port": 3
        }
    ]
}' http://localhost:8080/stats/flowentry/add



#注意s2也要下发流表
#端口号1发来数据
curl -X POST -d '{
    "dpid": 2,
    "priority":1,
    "match":{
        "in_port":1
    },
    "actions":[
        {
            "type": "PUSH_VLAN",     # s1将从主机发来的数据包打上vlan_tag
            "ethertype": 33024       # 帧类型0x8100(=33024): 表示IEEE 802.1Q的VLAN数据帧
        },
        {
            "type": "SET_FIELD",
            "field": "vlan_vid",     # 设置VLAN ID
            "value": 4096            # 设置vlan_id的值
        },
        {
            "type": "OUTPUT",
            "port": 4
        }
    ]
}' http://127.0.0.1:8080/stats/flowentry/add

#端口号2发来数据
curl -X POST -d '{
    "dpid": 2,
    "priority":1,
    "match":{
        "in_port":2
    },
    "actions":[
        {
            "type": "PUSH_VLAN",     # s1将从主机发来的数据包打上vlan_tag
            "ethertype": 33024       # 帧类型0x8100(=33024): 表示IEEE 802.1Q的VLAN数据帧
        },
        {
            "type": "SET_FIELD",
            "field": "vlan_vid",     # 设置VLAN ID
            "value": 4097            # 设置vlan_id的值
        },
        {
            "type": "OUTPUT",
            "port": 4
        }
    ]
}' http://127.0.0.1:8080/stats/flowentry/add

#端口号3发来数据
curl -X POST -d '{
    "dpid": 2,
    "priority":1,
    "match":{
        "in_port":3
    },
    "actions":[
        {
            "type": "PUSH_VLAN",     # s1将从主机发来的数据包打上vlan_tag
            "ethertype": 33024       # 帧类型0x8100(=33024): 表示IEEE 802.1Q的VLAN数据帧
        },
        {
            "type": "SET_FIELD",
            "field": "vlan_vid",     # 设置VLAN ID
            "value": 4098            # 设置vlan_id的值
        },
        {
            "type": "OUTPUT",
            "port": 4
        }
    ]
}' http://127.0.0.1:8080/stats/flowentry/add



#向端口1发送数据
curl -X POST -d '{
    "dpid": 2,
    "priority":1,
    "match":{
        "vlan_vid": "0"
    },
    "actions":[
        {
            "type": "POP_VLAN",     # 给进入交换机的包去除 vlan_tag
        },
        {
            "type": "OUTPUT",
            "port": 1
        }
    ]
}' http://localhost:8080/stats/flowentry/add

#向端口2发送数据
curl -X POST -d '{
    "dpid": 2,
    "priority":1,
    "match":{
        "vlan_vid": "1"
    },
    "actions":[
        {
            "type": "POP_VLAN",     # 给进入交换机的包去除 vlan_tag
        },
        {
            "type": "OUTPUT",
            "port": 2
        }
    ]
}' http://localhost:8080/stats/flowentry/add

#向端口3发送数据
curl -X POST -d '{
    "dpid": 2,
    "priority":1,
    "match":{
        "vlan_vid": "2"
    },
    "actions":[
        {
            "type": "POP_VLAN",     # 给进入交换机的包去除 vlan_tag
        },
        {
            "type": "OUTPUT",
            "port": 3
        }
    ]
}' http://localhost:8080/stats/flowentry/add

将该脚本保存成.sh文件

安装curl

sudo apt-get install curl

下发流表

sh flow.sh      //下发流表

ryu看到的下发流表

检测连通性

3.对比两种方法，写出你的实验体会

我认为使用Ryu下发流表会简单、更容易理解和实现。流表的结构清晰明了，而Open vSwitch更难配置与理解。