六、zookeeper 事件监听机制

一、watcher概念

　　zookeeper提供了数据的发布/订阅功能，多个订阅者可同时监听某一特定主题对象，当该主题对象的自身状态发生变化时(例如节点内容改变、节点下的子节点列表改变等)，会实时、主动通知所有订阅者。

　　zookeeper采用了Watcher机制实现数据的发布/订阅功能。该机制在被订阅对象发生变化时会异步通知客户端，因此客户端不必在Watcher注册后轮询阻塞，从而减轻了客户端压力。

　　watcher机制实际上与观察者模式类似，也可看作是一种观察者模式在分布式场景下的实现方式。

二、watcher架构

　　Watcher实现由三个部分组成：

• • Zookeeper服务端

  • Zookeeper客户端

  • 客户端的ZKWatchManager对象

　　客户端首先将Watcher注册到服务端，同时将Watcher对象保存到客户端的Watch管理器中。当ZooKeeper服务端监听的数据状态发生变化时，服务端会主动通知客户端，接着客户端的Watch管理器会触发相关Watcher来回相应处理逻辑，从而完成整体的数据发布/订阅流程。

三、watcher特性

特性	说明
一次性	watcher是一次性的，一旦被触发就会移除，再次使用时需要重新注册
客户端顺序回调	watcher回调是顺序串行化执行的，只有回调后客户端才能看到最新的数据状态。一个watcher回调逻辑不应该太多，以免影响别的watcher执行
轻量级	WatchEvent是最小的通信单元，结构上只包含通知状态、事件类型和节点路径，并不会告诉数据节点变化前后的具体内容；
时效性	watcher只有在当前session彻底失效时才会无效，若在session有效期内快速重连成功，则watcher依然存在，仍可接收到通知；

四、watcher接口设计

　　Watcher是一个接口，任何实现了Watcher接口的类就是一个新的Watcher。Watcher内部包含了两个枚举类：KeeperState、EventType

• Watcher通知状态(KeeperState)

　　KeeperState是客户端与服务端连接状态发生变化时对应的通知类型。路径为org.apache.zookeeper.Watcher.Event.KeeperState，是一个枚举类，其枚举属性如下：

枚举属性	说明
SyncConnected	客户端与服务器正常连接时
Disconnected	客户端与服务器断开连接时
Expired	会话session失效时
AuthFailed	身份认证失败时

• Watcher事件类型(EventType)

　　EventType是数据节点(znode)发生变化时对应的通知类型。EventType变化时KeeperState永远处于SyncConnected通知状态下；当KeeperState发生变化时，EventType永远为None。其路径为org.apache.zookeeper.Watcher.Event.EventType，是一个枚举类，枚举属性如下：

枚举属性	说明
None	无
NodeCreated	Watcher监听的数据节点被创建时
NodeDeleted	Watcher监听的数据节点被删除时
NodeDataChanged	Watcher监听的数据节点内容发生变更时(无论内容数据 是否变化)
NodeChildrenChanged	Watcher监听的数据节点的子节点列表发生变更时

　　注：客户端接收到的相关事件通知中只包含状态及类型等信息，不包括节点变化前后的具体内容，变化前的数据需业务自身存储，变化后的数据需调用get等方法重新获取；

五、捕获相应的事件

　　上面讲到zookeeper客户端连接的状态和zookeeper对znode节点监听的事件类型，下面我们来讲解如何建立zookeeper的watcher监听。在zookeeper中采用zk.getChildren(path, watch)、zk.exists(path, watch)、zk.getData(path, watcher, stat)这样的方式为某个znode注册监听。

　　下表以node-x节点为例，说明调用的注册方法和可监听事件间的关系：

注册方式	Created	ChildrenChanged	Changed	Deleted
zk.exists(“/node- x”,watcher)	可监控		可监控	可监控
zk.getData(“/node- x”,watcher)			可监控	可监控
zk.getChildren(“/node- x”,watcher)		可监控		可监控

 六、注册watcher的方法

6.1、客服端与服务器的连接状态

KeeperState 通知状态
SyncConnected:客户端与服务器正常连接时
Disconnected:客户端与服务器断开连接时
Expired:会话session失效时
AuthFailed:身份认证失败时
事件类型为:None

public class ZKConnectionWatcher implements Watcher {
    private static final String IP = "192.168.126.141:2181,192.168.126.142:2181,192.168.126.143:2181";
    private static final int TIME_OUT = 5000;
    // 计数器对象
    static CountDownLatch countDownLatch = new CountDownLatch(1);
    // 连接对象
    static ZooKeeper zooKeeper;

    @Override
    public void process(WatchedEvent event) {
        try {
            // 事件类型
            if (event.getType() == Event.EventType.None) {
                if (event.getState() == Event.KeeperState.SyncConnected) {
                    System.out.println("连接创建成功!");
                    countDownLatch.countDown();
                } else if (event.getState() == Event.KeeperState.Disconnected) {
                    System.out.println("断开连接！");
                } else if (event.getState() == Event.KeeperState.Expired) {
                    System.out.println("会话超时!");
                    zooKeeper = new ZooKeeper("192.168.60.130:2181", 5000, new ZKConnectionWatcher());
                } else if (event.getState() == Event.KeeperState.AuthFailed) {
                    System.out.println("认证失败！");
                }
            }
        } catch (Exception ex) {
            ex.printStackTrace();
        }
    }

    public static void main(String[] args) {
        try {
            zooKeeper = new ZooKeeper(IP, TIME_OUT, new ZKConnectionWatcher());
            // 阻塞线程等待连接的创建
            countDownLatch.await();
            // 会话id
            System.out.println(zooKeeper.getSessionId());
            // 添加授权用户
            zooKeeper.addAuthInfo("digest", "wss:12345".getBytes());
            byte[] bs = zooKeeper.getData("/hello", false, null);
            System.out.println(new String(bs));
            Thread.sleep(50000);
            zooKeeper.close();
            System.out.println("结束");
        } catch (Exception ex) {
            ex.printStackTrace();
        }
    }
}

 6.2、检查节点是否存在

// 使用连接对象的监视器
exists(String path, boolean b)
// 自定义监视器
exists(String path, Watcher w)
   
// NodeCreated:节点创建
// NodeDeleted:节点删除
// NodeDataChanged:节点内容发生变化

• path- znode路径。

• b- 是否使用连接对象中注册的监视器。

• w-监视器对象。

public class ZKWatcherExists {
    private static final String IP = "192.168.126.141:2181,192.168.126.142:2181,192.168.126.143:2181";
    private static final int TIME_OUT = 5000;
    ZooKeeper zooKeeper = null;

    @Before
    public void before() throws IOException, InterruptedException {
        CountDownLatch countDownLatch = new CountDownLatch(1);
        // 连接zookeeper客户端
        zooKeeper = new ZooKeeper(IP, TIME_OUT, (event)-> {
                System.out.println("连接对象的参数!");
                // 连接成功
                if (event.getState() == Watcher.Event.KeeperState.SyncConnected) {
                    countDownLatch.countDown();
                }
                System.out.println("path=" + event.getPath());
                System.out.println("eventType=" + event.getType());
        });
        countDownLatch.await();
    }

    @After
    public void after() throws InterruptedException {
        zooKeeper.close();
    }

    @Test
    public void watcherExists1() throws KeeperException, InterruptedException {
        // arg1:节点的路径
        // arg2:使用连接对象中的watcher
        Stat exists = zooKeeper.exists("/hello", true);
        Thread.sleep(50000);
        System.out.println("结束");
    }

    @Test
    public void watcherExists2() throws KeeperException, InterruptedException {
        // arg1:节点的路径
        // arg2:自定义watcher对象
        zooKeeper.exists("/watcher1", new Watcher() {
            @Override
            public void process(WatchedEvent event) {
                System.out.println("自定义watcher");
                System.out.println("path=" + event.getPath());
                System.out.println("eventType=" + event.getType());
            }
        });
        Thread.sleep(50000);
        System.out.println("结束");
    }

    @Test
    public void watcherExists3() throws KeeperException, InterruptedException {
        // watcher一次性
        Watcher watcher = new Watcher() {
            @Override
            public void process(WatchedEvent event) {
                try {
                    System.out.println("自定义watcher");
                    System.out.println("path=" + event.getPath());
                    System.out.println("eventType=" + event.getType());
                    zooKeeper.exists("/watcher1", this);
                } catch (Exception ex) {
                    ex.printStackTrace();
                }
            }
        };
        zooKeeper.exists("/watcher1", watcher);
        Thread.sleep(80000);
        System.out.println("结束");
    }

    @Test
    public void watcherExists4() throws KeeperException, InterruptedException {
        // 注册多个监听器对象
        zooKeeper.exists("/watcher1", new Watcher() {
            @Override
            public void process(WatchedEvent event) {
                System.out.println("1");
                System.out.println("path=" + event.getPath());
                System.out.println("eventType=" + event.getType());
            }
        });
        zooKeeper.exists("/watcher1", new Watcher() {
            @Override
            public void process(WatchedEvent event) {
                System.out.println("2");
                System.out.println("path=" + event.getPath());
                System.out.println("eventType=" + event.getType());
            }
        });
        Thread.sleep(80000);
        System.out.println("结束");
    }
}

 6.3、查看节点

// 使用连接对象的监视器
getData(String path, boolean b, Stat stat)
// 自定义监视器
getData(String path, Watcher w, Stat stat)
   
// NodeDeleted:节点删除
// NodeDataChanged:节点内容发生变化

• path- znode路径。

• b- 是否使用连接对象中注册的监视器。

• w-监视器对象。

• stat- 返回znode的元数据。'

public class ZKWatcherGetData {
    private static final String IP = "192.168.126.141:2181,192.168.126.142:2181,192.168.126.143:2181";
    private static final int TIME_OUT = 5000;
    ZooKeeper zooKeeper = null;

    @Before
    public void before() throws IOException, InterruptedException {
        CountDownLatch countDownLatch = new CountDownLatch(1);
        // 连接zookeeper客户端
        zooKeeper = new ZooKeeper(IP, TIME_OUT, (event) -> {
            System.out.println("连接对象的参数!");
            // 连接成功
            if (event.getState() == Watcher.Event.KeeperState.SyncConnected) {
                countDownLatch.countDown();
            }
            System.out.println("path=" + event.getPath());
            System.out.println("eventType=" + event.getType());
        });
        countDownLatch.await();
    }

    @After
    public void after() throws InterruptedException {
        zooKeeper.close();
    }

    @Test
    public void watcherGetData1() throws KeeperException, InterruptedException {
        // arg1:节点的路径
        // arg2:使用连接对象中的watcher
        zooKeeper.getData("/hello", true, null);
        Thread.sleep(50000);
        System.out.println("结束");
    }

    @Test
    public void watcherGetData2() throws KeeperException, InterruptedException {
        // arg1:节点的路径
        // arg2:自定义watcher对象
        zooKeeper.getData("/hello", (event) -> {
            System.out.println("自定义watcher");
            System.out.println("path=" + event.getPath());
            System.out.println("eventType=" + event.getType());
        }, null);
        Thread.sleep(50000);
        System.out.println("结束");
    }

    @Test
    public void watcherGetData3() throws KeeperException, InterruptedException {
        // 一次性
        Watcher watcher = new Watcher() {
            @Override
            public void process(WatchedEvent event) {
                try {
                    System.out.println("自定义watcher");
                    System.out.println("path=" + event.getPath());
                    System.out.println("eventType=" + event.getType());
                    if (event.getType() == Event.EventType.NodeDataChanged) {
                        zooKeeper.getData("/hello", this, null);
                    }
                } catch (Exception ex) {
                    ex.printStackTrace();
                }
            }
        };
        zooKeeper.getData("/hello", watcher, null);
        Thread.sleep(50000);
        System.out.println("结束");
    }

    @Test
    public void watcherGetData4() throws KeeperException, InterruptedException {
        // 注册多个监听器对象
        zooKeeper.getData("/hello", new Watcher() {
            @Override
            public void process(WatchedEvent event) {
                try {
                    System.out.println("1");
                    System.out.println("path=" + event.getPath());
                    System.out.println("eventType=" + event.getType());
                    if (event.getType() == Event.EventType.NodeDataChanged) {
                        zooKeeper.getData("/hello", this, null);
                    }
                } catch (Exception ex) {
                    ex.printStackTrace();
                }
            }
        }, null);

        zooKeeper.getData("/hello", new Watcher() {
            @Override
            public void process(WatchedEvent event) {
                try {
                    System.out.println("2");
                    System.out.println("path=" + event.getPath());
                    System.out.println("eventType=" + event.getType());
                    if (event.getType() == Event.EventType.NodeDataChanged) {
                        zooKeeper.getData("/hello", this, null);
                    }
                } catch (Exception ex) {
                    ex.printStackTrace();
                }
            }
        }, null);
        Thread.sleep(50000);
        System.out.println("结束");
    }
}

 6.4、查看子节点

// 使用连接对象的监视器
getChildren(String path, boolean b)
// 自定义监视器
getChildren(String path, Watcher w)
   
// NodeChildrenChanged:子节点发生变化
// NodeDeleted:节点删除

• path- znode路径。

• b- 是否使用连接对象中注册的监视器。

• w-监视器对象。

public class ZKWatcherGetChild {
    private static final String IP = "192.168.126.141:2181,192.168.126.142:2181,192.168.126.143:2181";
    private static final int TIME_OUT = 5000;
    ZooKeeper zooKeeper = null;

    @Before
    public void before() throws IOException, InterruptedException {
        CountDownLatch connectedSemaphore = new CountDownLatch(1);
        // 连接zookeeper客户端
        zooKeeper = new ZooKeeper(IP, TIME_OUT, (event) -> {
            System.out.println("连接对象的参数!");
            // 连接成功
            if (event.getState() == Watcher.Event.KeeperState.SyncConnected) {
                connectedSemaphore.countDown();
            }
            System.out.println("path=" + event.getPath());
            System.out.println("eventType=" + event.getType());
        });
        connectedSemaphore.await();
    }

    @After
    public void after() throws InterruptedException {
        zooKeeper.close();
    }

    @Test
    public void watcherGetChild1() throws KeeperException, InterruptedException {
        // arg1:节点的路径
        // arg2:使用连接对象中的watcher
        zooKeeper.getChildren("/hello", true);
        Thread.sleep(50000);
        System.out.println("结束");
    }

    @Test
    public void watcherGetChild2() throws KeeperException, InterruptedException {
        // arg1:节点的路径
        // arg2:自定义watcher
        zooKeeper.getChildren("/hello", (event) -> {
            System.out.println("自定义watcher");
            System.out.println("path=" + event.getPath());
            System.out.println("eventType=" + event.getType());
        });
        Thread.sleep(50000);
        System.out.println("结束");
    }

    @Test
    public void watcherGetChild3() throws KeeperException, InterruptedException {
        // 一次性
        Watcher watcher = new Watcher() {
            @Override
            public void process(WatchedEvent event) {
                try {
                    System.out.println("自定义watcher");
                    System.out.println("path=" + event.getPath());
                    System.out.println("eventType=" + event.getType());
                    if (event.getType() ==
                            Event.EventType.NodeChildrenChanged) {
                        zooKeeper.getChildren("/hello", this);
                    }
                } catch (Exception ex) {
                    ex.printStackTrace();
                }
            }
        };
        zooKeeper.getChildren("/hello", watcher);
        Thread.sleep(50000);
        System.out.println("结束");
    }

    @Test
    public void watcherGetChild4() throws KeeperException, InterruptedException {
        // 多个监视器对象
        zooKeeper.getChildren("/hello", new Watcher() {
            @Override
            public void process(WatchedEvent event) {
                try {
                    System.out.println("1");
                    System.out.println("path=" + event.getPath());
                    System.out.println("eventType=" + event.getType());
                    if (event.getType() == Event.EventType.NodeChildrenChanged) {
                        zooKeeper.getChildren("/hello", this);
                    }
                } catch (Exception ex) {
                    ex.printStackTrace();
                }
            }
        });
        zooKeeper.getChildren("/hello", new Watcher() {
            @Override
            public void process(WatchedEvent event) {
                try {
                    System.out.println("2");
                    System.out.println("path=" + event.getPath());
                    System.out.println("eventType=" + event.getType());
                    if (event.getType() ==
                            Event.EventType.NodeChildrenChanged) {
                        zooKeeper.getChildren("/hello", this);
                    }
                } catch (Exception ex) {
                    ex.printStackTrace();
                }
            }
        });
        Thread.sleep(50000);
        System.out.println("结束");
    }

}

 七、配置中心案例

　　工作中有这样的一个场景: 数据库用户名和密码信息放在一个配置文件中，应用读取该配置文件，配置文件信息放入缓存。

　　若数据库的用户名和密码改变时候，还需要重新加载缓存，比较麻烦，通过ZooKeeper可以轻松完成，当数据库发生变化时自动完成缓存同步。

　　设计思路：

1. 连接zookeeper服务器

2. 读取zookeeper中的配置信息，注册watcher监听器，存入本地变量

3. 当zookeeper中的配置信息发生变化时，通过watcher的回调方法捕获数据变化事件

4. 重新获取配置信息

public class MyConfigCenter implements Watcher {
    private static final String IP = "192.168.126.141:2181,192.168.126.142:2181,192.168.126.143:2181";
    private static final int TIME_OUT = 5000;

    CountDownLatch countDownLatch = new CountDownLatch(1);
    // 连接对象
    static ZooKeeper zooKeeper;
    // 用于本地化存储配置信息
    private String url;
    private String username;
    private String password;

    // 构造方法
    public MyConfigCenter() {
        initValue();
    }

    @Override
    public void process(WatchedEvent event) {
        try {
            // 捕获事件状态
            if (event.getType() == Event.EventType.None) {
                if (event.getState() == Event.KeeperState.SyncConnected) {
                    System.out.println("连接成功");
                    countDownLatch.countDown();
                } else if (event.getState() == Event.KeeperState.Disconnected) {
                    System.out.println("连接断开!");
                } else if (event.getState() == Event.KeeperState.Expired) {
                    System.out.println("连接超时!");
                    // 超时后服务器端已经将连接释放，需要重新连接服务器端
                    zooKeeper = new ZooKeeper(IP, TIME_OUT, new ZKConnectionWatcher());
                } else if (event.getState() == Event.KeeperState.AuthFailed) {
                    System.out.println("验证失败!");
                }
                // 当配置信息发生变化时
            } else if (event.getType() == Event.EventType.NodeDataChanged) {
                initValue();
            }
        } catch (Exception ex) {
            ex.printStackTrace();
        }
    }

    private void initValue() {
        try {
            // 创建连接对象
            zooKeeper = new ZooKeeper(IP, TIME_OUT, this);
            // 阻塞线程，等待连接的创建成功
            countDownLatch.await();
            // 读取配置信息
            this.url = new String(zooKeeper.getData("/config/url", true, null));
            this.username = new String(zooKeeper.getData("/config/username", true, null));
            this.password = new String(zooKeeper.getData("/config/password", true, null));
        } catch (Exception ex) {
            ex.printStackTrace();
        }
    }

    public static void main(String[] args) {
        try {
            MyConfigCenter myConfigCenter = new MyConfigCenter();
            for (int i = 1; i <= 20; i++) {
                Thread.sleep(5000);
                System.out.println("url:" + myConfigCenter.getUrl());
                System.out.println("username:" + myConfigCenter.getUsername());
                System.out.println("password:" + myConfigCenter.getPassword());
                System.out.println("########################################");
            }
        } catch (Exception ex) {
            ex.printStackTrace();
        }
    }

    public String getUrl() {
        return url;
    }

    public void setUrl(String url) {
        this.url = url;
    }

    public String getUsername() {
        return username;
    }

    public void setUsername(String username) {
        this.username = username;
    }

    public String getPassword() {
        return password;
    }

    public void setPassword(String password) {
        this.password = password;
    }

}

 八、生成分布式唯一ID

　　在过去的单库单表型系统中，通常可以使用数据库字段自带的auto_increment属性来自动为每条记录生成一个唯一的ID。但是分库分表后，就无法在依靠数据库的auto_increment属性来唯一标识一条记录了。此时我们就可以用zookeeper在分布式环境下生成全局唯一ID。

　　设计思路：

1. 连接zookeeper服务器

2. 指定路径生成临时有序节点

3. 取序列号及为分布式环境下的唯一ID

public class GloballyUniqueId implements Watcher {
    private static final String IP = "192.168.126.141:2181,192.168.126.142:2181,192.168.126.143:2181";
    private static final int TIME_OUT = 5000;
    //  计数器对象
    CountDownLatch countDownLatch = new CountDownLatch(1);
    //  用户生成序号的节点
    String defaultPath = "/uniqueId";
    //  连接对象
    ZooKeeper zooKeeper;

    @Override
    public void process(WatchedEvent event) {
        try {
            // 捕获事件状态
            if (event.getType() == Watcher.Event.EventType.None) {
                if (event.getState() == Watcher.Event.KeeperState.SyncConnected) {
                    System.out.println("连接成功");
                    countDownLatch.countDown();
                } else if (event.getState() == Watcher.Event.KeeperState.Disconnected) {
                    System.out.println("连接断开!");
                } else if (event.getState() == Watcher.Event.KeeperState.Expired) {
                    System.out.println("连接超时!");
                    // 超时后服务器端已经将连接释放，需要重新连接服务器端
                    zooKeeper = new ZooKeeper(IP, TIME_OUT,new ZKConnectionWatcher());
                } else if (event.getState() == Watcher.Event.KeeperState.AuthFailed) {
                    System.out.println("验证失败!");
                }
            }
        } catch (Exception ex) {
            ex.printStackTrace();
        }
    }

    // 构造方法
    public GloballyUniqueId() {
        try {
            //打开连接
            zooKeeper = new ZooKeeper(IP, TIME_OUT, this);
            // 阻塞线程，等待连接的创建成功
            countDownLatch.await();
        } catch (Exception ex) {
            ex.printStackTrace();
        }
    }

    // 生成id的方法
    public String getUniqueId() {
        String path = "";
        try {
            //创建临时有序节点
            path = zooKeeper.create(defaultPath, new byte[0], ZooDefs.Ids.OPEN_ACL_UNSAFE, CreateMode.EPHEMERAL_SEQUENTIAL);
        } catch (Exception ex) {
            ex.printStackTrace();
        }
        // /uniqueId0000000001
        return path.substring(9);
    }

    public static void main(String[] args) {
        GloballyUniqueId globallyUniqueId = new GloballyUniqueId();
        for (int i = 1; i <= 5; i++) {
            String id = globallyUniqueId.getUniqueId();
            System.out.println(id);
        }
    }
}

 九、分布式锁

　　分布式锁有多种实现方式，比如通过数据库、redis都可实现。作为分布式协同工具ZooKeeper，当然也有着标准的实现方式。下面介绍在zookeeper中如何实现排他锁。

　　设计思路：

1. 1. 每个客户端往/Locks下创建临时有序节点/Locks/Lock 000000001

   2. 客户端取得/Locks下子节点，并进行排序，判断排在最前面的是否为自己，如果自己的锁节点在第一位，代表获取锁成功

   3. 如果自己的锁节点不在第一位，则监听自己前一位的锁节点。例如，自己锁节点Lock 000000001

   4. 当前一位锁节点（Lock000000002）的逻辑

   5. 监听客户端重新执行第2步逻辑，判断自己是否获得了锁

public class MyLock {
    private static final String IP = "192.168.126.141:2181,192.168.126.142:2181,192.168.126.143:2181";
    private static final int TIME_OUT = 5000;
    //  计数器对象
    CountDownLatch countDownLatch = new CountDownLatch(1);
    //ZooKeeper配置信息
    ZooKeeper zooKeeper;
    private static final String LOCK_ROOT_PATH = "/Locks";
    private static final String LOCK_NODE_NAME = "Lock_";
    private String lockPath;

    // 打开zookeeper连接
    public MyLock() {
        try {
            zooKeeper = new ZooKeeper(IP, TIME_OUT, (event) -> {
                if (event.getType() == Watcher.Event.EventType.None) {
                    if (event.getState() == Watcher.Event.KeeperState.SyncConnected) {
                        System.out.println("连接成功!");
                        countDownLatch.countDown();
                    }
                }
            });
            countDownLatch.await();
        } catch (Exception ex) {
            ex.printStackTrace();
        }
    }

    //获取锁
    public void acquireLock() throws Exception {
        //创建锁节点
        createLock();
        //尝试获取锁
        attemptLock();
    }

    //创建锁节点
    private void createLock() throws Exception {
        //判断Locks是否存在，不存在创建
        Stat stat = zooKeeper.exists(LOCK_ROOT_PATH, false);
        if (stat == null) {
            zooKeeper.create(LOCK_ROOT_PATH, new byte[0], ZooDefs.Ids.OPEN_ACL_UNSAFE, CreateMode.PERSISTENT);
        }
        // 创建临时有序节点
        lockPath = zooKeeper.create(LOCK_ROOT_PATH + "/" + LOCK_NODE_NAME, new byte[0], ZooDefs.Ids.OPEN_ACL_UNSAFE, CreateMode.EPHEMERAL_SEQUENTIAL);
        System.out.println("节点创建成功:" + lockPath);
    }

    //监视器对象，监视上一个节点是否被删除
    Watcher watcher = new Watcher() {
        @Override
        public void process(WatchedEvent event) {
            if (event.getType() == Event.EventType.NodeDeleted) {
                synchronized (this) {
                    notifyAll();
                }
            }
        }
    };

    //尝试获取锁
    private void attemptLock() throws Exception {
        // 获取Locks节点下的所有子节点
        List<String> list = zooKeeper.getChildren(LOCK_ROOT_PATH, false);
        // 对子节点进行排序
        Collections.sort(list);
        // /Locks/Lock_000000001
        int index = list.indexOf(lockPath.substring(LOCK_ROOT_PATH.length() + 1));
        if (index == 0) {
            System.out.println("获取锁成功!");
            return;
        } else {
            // 上一个节点的路径
            String path = list.get(index - 1);
            Stat stat = zooKeeper.exists(LOCK_ROOT_PATH + "/" + path, watcher);
            if (stat == null) {
                attemptLock();
            } else {
                synchronized (watcher) {
                    watcher.wait();
                }
                attemptLock();
            }
        }
    }

    //释放锁
    public void releaseLock() throws Exception {
        //删除临时有序节点
        zooKeeper.delete(this.lockPath, -1);
        zooKeeper.close();
        System.out.println("锁已经释放:" + this.lockPath);
    }

    public static void main(String[] args) {
        try {
            MyLock myLock = new MyLock();
            myLock.createLock();
        } catch (Exception ex) {
            ex.printStackTrace();
        }
    }
}

public class TicketSeller {
    private void sell() {
        System.out.println("售票开始");
        // 线程随机休眠数毫秒，模拟现实中的费时操作
        int sleepMillis = 5000;
        try {
            //代表复杂逻辑执行了一段时间
            Thread.sleep(sleepMillis);
        } catch (InterruptedException e) {
            e.printStackTrace();
        }
        System.out.println("售票结束");
    }

    public void sellTicketWithLock() throws Exception {
        MyLock lock = new MyLock();
        // 获取锁
        lock.acquireLock();
        sell();
        //释放锁
        lock.releaseLock();
    }

    public static void main(String[] args) throws Exception {
        TicketSeller ticketSeller = new TicketSeller();
        for (int i = 0; i < 10; i++) {
            ticketSeller.sellTicketWithLock();
        }
    }
}