poj-1045（数学不好怪我咯）

Description

Consider the AC circuit below. We will assume that the circuit is in steady-state. Thus, the voltage at nodes 1 and 2 are given by v₁ = V_S coswt and v₂ = V_Rcos (wt + q ) where V_S is the voltage of the source, w is the frequency (in radians per second), and t is time. V_R is the magnitude of the voltage drop across the resistor, and q is its phase.

You are to write a program to determine V_R for different values of w. You will need two laws of electricity to solve this problem. The first is Ohm's Law, which states v₂ = iR where i is the current in the circuit, oriented clockwise. The second is i = C d/dt (v₁-v₂) which relates the current to the voltage on either side of the capacitor. "d/dt"indicates the derivative with respect to t.

Input

The input will consist of one or more lines. The first line contains three real numbers and a non-negative integer. The real numbers are V_S, R, and C, in that order. The integer, n, is the number of test cases. The following n lines of the input will have one real number per line. Each of these numbers is the angular frequency, w.

Output

For each angular frequency in the input you are to output its corresponding V_R on a single line. Each V_R value output should be rounded to three digits after the decimal point.

Sample Input

1.0 1.0 1.0 9
0.01
0.031623
0.1
0.31623
1.0
3.1623
10.0
31.623
100.0

题意：给出公式V2=iR,V2=Vr * cos(wt + q), V1=Vs * cos(wt), i = C * d(v1 - v2)/dt; d是求导数的意思。已知Vs,R,C,w，求Vr。

分析：利用V2分别等于两个式子，将i,V2和V1带入，可得方程：R*C*d(Vs * cos(wt) - Vr * cos(wt + q))/dt  = Vr * cos(wt + q)

根据求导公式：d(cos(x))/dx = -sinx可将原方程化为：R*C*w*(Vr*sin(wt + q) - Vs*sin(wt)) = Vr * cos(wt + q)

在这里三角函数的参数有两个：wt+q和wt，我们分别令他们为0,方程分别可变为：R*C *w*Vs*sin(q) = Vr; R*C * w*sin(q) = cos(q)

由2式得：cot(q) = R * C * w。

由公式：sin^2(a) = 1/(cot ^2(a) + 1)

可得：sin(q)=sqrt(1/(cot^2(q) + 1))

即：sin(q) =sqrt(1/(R^2*C^2*w^2 + 1))

#include<iomanip>
#include<iostream>
#include<cmath>
using namespace std;
int main()
{

    double vs,r,c,w;
    int n;
     cin>>vs>>r>>c>>n;
    while(n--)
    {
       cin>>w;
       cout<<fixed<<setprecision(3)<<r*c*w*vs*sqrt(1/(r*r*c*c*w*w+1))<<endl;
    }


    return 0;
}

　　

代入1式可得：Vr = R * C * w * Vs * sqrt(1/(R^2*C^2*w^2 + 1))