zoukankan      html  css  js  c++  java

  • Barcode Professional for ASP.NET使用教程：指定区域条码的显示

    需求：

    • Barcode Professional for ASP.NETv3.0以上
    • Microsoft .NET 框架（所有版本）

    由于条件的限制，条码显示位置有限，那么就需要懂得规定的区域内显示条码方法。今天将给大家简单介绍如何在规定区域内显示条码。

    我们知道在Barcode Professional有GetBarcodeImage()方法，而这种方法可以通过barsAreaSizeInInches参数实现规定区域内条码的显示。现在我们需注意以下三点：

    • 规定区域的尺寸位置（条码宽和高）
    • 规定目标区域的宽（包括条码加上左右Quiet Zones 区域的宽）
    • 规定目标区域的高（条码栏高度）

    假定：编码的数据是1234567890，使用128代码，以300DPI呈现，可供条码显示的位置面积是1*0.5英寸.

    参考代码：

    VB

     1 Private Sub SaveBarcode()
 2 'Create a Barcode Professional object
 3 Dim bcp As New Neodynamic.WebControls.BarcodeProfessional.BarcodeProfessional()
 4 'Set the barcode symbology to Code 128
 5 bcp.Symbology = Neodynamic.WebControls.BarcodeProfessional.Symbology.Code128
 6 'Set the value to encode
 7 bcp.Code = "1234567890"
 8 'Barcode dimensions settings
 9 bcp.BarHeight = 1.0F
10 bcp.BarWidth = 0.01F
11 'Resolution
12 Dim dpi As Single = 300.0F
13 'Target size in inches
14 Dim targetArea As New System.Drawing.SizeF(1.0F, 0.5F)
15 'Get the barcode image fitting the target area
16 Dim imgBarcode As System.Drawing.Image = bcp.GetBarcodeImage(dpi, targetArea)
17 'Save it on disk in PNG format
18 imgBarcode.Save("C:	emparcode128.png", System.Drawing.Imaging.ImageFormat.Png)
19 imgBarcode.Dispose()
20 End Sub

    C#

     1 private void SaveBarcode()
 2 {
 3 //Create a Barcode Professional object
 4 Neodynamic.WebControls.BarcodeProfessional.BarcodeProfessional bcp = new Neodynamic.WebControls.BarcodeProfessional.BarcodeProfessional();
 5 //Set the barcode symbology to Code 128
 6 bcp.Symbology = Neodynamic.WebControls.BarcodeProfessional.Symbology.Code128;
 7 //Set the value to encode
 8 bcp.Code = "1234567890";
 9 //Barcode dimensions settings
10 bcp.BarHeight = 1.0f;
11 bcp.BarWidth = 0.01f;
12 //Resolution
13 float dpi = 300.0f;
14 //Target size in inches
15 System.Drawing.SizeF targetArea = new System.Drawing.SizeF(1.0f, 0.5f);
16 //Get the barcode image fitting the target area
17 System.Drawing.Image imgBarcode = bcp.GetBarcodeImage(dpi, targetArea);
18 //Save it on disk in PNG format
19 imgBarcode.Save(@"C:	emparcode128.png", System.Drawing.Imaging.ImageFormat.Png);
20 imgBarcode.Dispose();
    }

    需要注意的是目标宽度是整个条码栏宽度加上左右两边的Quiet Zones (QuietZoneWidth属性 )，然而目标区域高度仅仅只是条码栏的高度，可参考下图（前面代码生成）。

    figure

    如果只想条码布满整个目标区域，需要将QuietZoneWidth属性设置为0（即除去左右两边的边距）DisplayCode属性设置为False（即隐藏可读文本），可参考下列代码

    VB

     1 Private Sub SaveBarcode()
 2 'Create a Barcode Professional object
 3 Dim bcp As New Neodynamic.WebControls.BarcodeProfessional.BarcodeProfessional()
 4 'Set the barcode symbology to Code 128
 5 bcp.Symbology = Neodynamic.WebControls.BarcodeProfessional.Symbology.Code128
 6 'Set the value to encode
 7 bcp.Code = "1234567890"
 8 'Barcode dimensions settings
 9 bcp.BarHeight = 1.0F
10 bcp.BarWidth = 0.01F
11 bcp.QuietZoneWidth = 0
12 bcp.DisplayCode = False
13 'Resolution
14 Dim dpi As Single = 300.0F
15 'Target size in inches
16 Dim targetArea As New System.Drawing.SizeF(1.0F, 0.5F)
17 'Get the barcode image fitting the target area
18 Dim imgBarcode As System.Drawing.Image = bcp.GetBarcodeImage(dpi, targetArea)
19 'Save it on disk in PNG format
20 imgBarcode.Save("C:	emparcode128_full.png", System.Drawing.Imaging.ImageFormat.Png)
21 imgBarcode.Dispose()
22 End Sub

    C#

     1 private void SaveBarcode()
 2 {
 3 //Create a Barcode Professional object
 4 Neodynamic.WebControls.BarcodeProfessional.BarcodeProfessional bcp = new Neodynamic.WebControls.BarcodeProfessional.BarcodeProfessional();
 5 //Set the barcode symbology to Code 128
 6 bcp.Symbology = Neodynamic.WebControls.BarcodeProfessional.Symbology.Code128;
 7 //Set the value to encode
 8 bcp.Code = "1234567890";
 9 //Barcode dimensions settings
10 bcp.BarHeight = 1.0f;
11 bcp.BarWidth = 0.01f;
12 bcp.QuietZoneWidth = 0;
13 bcp.DisplayCode = false;
14 //Resolution
15 float dpi = 300.0f;
16 //Target size in inches
17 SizeF targetArea = new System.Drawing.SizeF(1.0f, 0.5f);
18 //Get the barcode image fitting the target area
19 System.Drawing.Image imgBarcode = bcp.GetBarcodeImage(dpi, targetArea);
20 //Save it on disk in PNG format
21 imgBarcode.Save(@"C:	emparcode128_full.png", System.Drawing.Imaging.ImageFormat.Png);
22 imgBarcode.Dispose();
23 }
    figure
    转载需注明来自慧都控件网
  • 相关阅读:
    linux 终端光标消失问题
    linux系统中条件测试语句
    linux shell if语句
    linux shell for循环
    linux 系统中read命令
    linux中while循环语句
    linux shell脚本中流程控制语句 if 、for、while、case
    pc端WINCE的安装包
    WinCE程序的几种开发方法
    Wince 下开发技巧(一)查看内存
  • 原文地址：https://www.cnblogs.com/jp294936239/p/4979736.html
Copyright © 2011-2022 走看看