一、实验环境:
[root@node02 ~]# uname -a
Linux node02 2.6.32-504.el6.x86_64 #1 SMP Wed Oct 15 04:27:16 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
[root@node02 ~]# cat /etc/redhat-release
CentOS release 6.6 (Final)
[root@node02 ~]#
[root@node02 ~]# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:0C:29:DF:59:C7
inet addr:192.168.112.129 Bcast:192.168.112.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fedf:59c7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:37078 errors:0 dropped:0 overruns:0 frame:0
TX packets:21925 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:26850825 (25.6 MiB) TX bytes:3241796 (3.0 MiB)
[root@node02 ~]#
二、SVN Apache安装
这里我直接用yum安装
[root@node02 ~]# yum install subversion apr apr-util mod_dav_svn httpd
[root@node02 ~]#
[root@node02 ~]# rpm -qa subversion apr apr-util mod_dav_svn httpd
apr-util-1.3.9-3.el6_0.1.x86_64
subversion-1.6.11-15.el6_7.x86_64
apr-1.3.9-5.el6_2.x86_64
httpd-2.2.15-55.el6.centos.2.x86_64
mod_dav_svn-1.6.11-15.el6_7.x86_64
[root@node02 ~]#
查看目录结构:
[root@node02 ~]# tree /etc/httpd/
/etc/httpd/
├── conf
│ ├── httpd.conf
│ └── magic
├── conf.d
│ ├── passwd
│ ├── README
│ ├── subversion.conf
│ ├── subversion.conf.bak
│ └── welcome.conf
├── logs -> ../../var/log/httpd
├── modules -> ../../usr/lib64/httpd/modules
└── run -> ../../var/run/httpd
5 directories, 7 files
[root@node02 ~]#
目录配置:
(1)svn目录配置
[root@node02 ~]# mkdir -p /application/svn/svndata
[root@node02 ~]# mkdir -p /application/svn/svndata/svnpasswd/
[root@node02 ~]#
[root@node02~]# touch /application/svn/svndata/svnpasswd/authz
[root@node02 ~]# touch /application/svn/svndata/svnpasswd/passwd
注意:这里的/application/svn/svndata是SVN的项目目录，该目录下就是我们平常的项目存放位置
目录/application/svn/svndata/svnpasswd/是用用户认证和权限文件存放路径，结构如下:
[root@node02 ~]# tree /application/svn/svndata/svnpasswd/
/application/svn/svndata/svnpasswd/
├── authz
└── passwd
0 directories, 2 files
[root@node02 ~]#
（2）启动SVN
[root@node02 ~]# svnserve -d -r /application/svn/svndata/
[root@node02 ~]# ps -ef|grep svn
root 13512 1 0 18:48 ? 00:00:00 svnserve -d -r /application/svn/svndata/
root 14068 1977 0 22:49 pts/0 00:00:00 grep svn
[root@node02 ~]# netstat -lnput|grep svn
tcp 0 0 0.0.0.0:3690 0.0.0.0:* LISTEN 13512/svnserve
[root@node02 ~]#
（3）创建项目
[root@node02 ~]# svnadmin create /application/svn/svndata/project001
[root@node02 ~]# tree /application/svn/svndata/project001/
/application/svn/svndata/project001/
├── conf
│ ├── authz
│ ├── passwd
│ └── svnserve.conf
├── db
│ ├── current
│ ├── format
│ ├── fsfs.conf
│ ├── fs-type
│ ├── min-unpacked-rev
│ ├── rep-cache.db
│ ├── revprops
│ │ └── 0
│ │ └── 0
│ ├── revs
│ │ └── 0
│ │ └── 0
│ ├── transactions
│ ├── txn-current
│ ├── txn-current-lock
│ ├── txn-protorevs
│ ├── uuid
│ └── write-lock
├── format
├── hooks
│ ├── post-commit.tmpl
│ ├── post-lock.tmpl
│ ├── post-revprop-change.tmpl
│ ├── post-unlock.tmpl
│ ├── pre-commit.tmpl
│ ├── pre-lock.tmpl
│ ├── pre-revprop-change.tmpl
│ ├── pre-unlock.tmpl
│ └── start-commit.tmpl
├── locks
│ ├── db.lock
│ └── db-logs.lock
└── README.txt
10 directories, 28 files
[root@node02 ~]#
（3）修改项目配置文件
[root@node02 ~]# cd /application/svn/svndata/project001
[root@node02 project001]# ls
conf db format hooks locks README.txt
[root@node02 project001]#
[root@node02 project001]# cd conf/
[root@node02 conf]# ll
total 12
-rw-r--r-- 1 root root 1080 Dec 31 22:53 authz
-rw-r--r-- 1 root root 309 Dec 31 22:53 passwd
-rw-r--r-- 1 root root 2279 Dec 31 22:53 svnserve.conf
[root@node02 conf]#
[root@node02 conf]# vim svnserve.conf
anon-access = none ------------------->12行去掉注释,并修改read为none
auth-access = write ------------------->13行去掉注释
password-db = /application/svn/svndata/svnpasswd/passwd ------------>18行去掉注释
authz-db = /application/svn/svndata/svnpasswd/authz ---------------->25行去掉注释
[root@node02 conf]#
提示：svnserve.conf中每个参数都要顶格写，开头不能有空格
或者执行如下命令修改:
[root@node02 conf]# sed -i 's/# anon-access = read/anon-access = none/g' svnserve.conf
[root@node02 conf]# sed -i 's/# auth-access = write/auth-access = write/g' svnserve.conf
[root@node02 conf]# sed -i 's%# password-db = passwd%password-db = /application/svn/svndata/svnpasswd/passwd%g' svnserve.conf
[root@node02 conf]# sed -i 's%# authz-db = authz%authz-db = /application/svn/svndata/svnpasswd/authz%g' svnserve.conf
修改完之后可以运行如下命令进行检查
[root@node02 conf]# egrep "-access|-db =" svnserve.conf
anon-access = none
auth-access = write
password-db = /application/svn/svndata/svnpasswd/passwd
authz-db = /application/svn/svndata/svnpasswd/authz
[root@node02 conf]#
确认配置修改无误后，拷贝用户认证文件passwd和权限管理文件authz到刚才创建的目录下：
[root@node02 conf]# cp authz passwd /application/svn/svndata/svnpasswd/
[root@node02 conf]# tree /application/svn/svndata/svnpasswd/
/application/svn/svndata/svnpasswd/
├── authz
└── passwd
0 directories, 2 files
[root@node02 conf]#
（4）创建用户admin、user001并设置密码，格式:用户名 = 密码
[root@node02 svnpasswd]# cat passwd
### This file is an example password file for svnserve.
### Its format is similar to that of svnserve.conf. As shown in the
### example below it contains one section labelled [users].
### The name and password for each user follow, one account per line.
[users]
# harry = harryssecret
# sally = sallyssecret
admin = admin
user001 = 123456
[root@node02 svnpasswd]#
访问权限:
[root@node02 svnpasswd]# cat authz
-----省略部分-------------
[aliases]
# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average
[groups]
# harry_and_sally = harry,sally
# harry_sally_and_joe = harry,sally,&joe
users = admin,user001
# [/foo/bar]
# harry = rw
# &joe = r
# * =
# [repository:/baz/fuz]
# @harry_and_sally = rw
# * = r
[/]
@users = rw
[root@node02 svnpasswd]#
说明:users= admin,user001将admin、user001两个用户赋值用户组users，@user = rw 是让用户组对跟目录有读写权限，也就是说用户admin、user001这两个用户对根目录有读写的权限。
到这里svn服务器算搭建完成。
（5）客户端安装
下面进行客户端的安装和操作
这里介绍安装过程，windows下安装客户端直接双击，然后下一步下一步即可。
（6）SVN的常用操作，提交、更新、删除文件
安装好之后，鼠标置于桌面右键会有如下图标出现 SVN Checkout和TortoiseSVN两个标签
这里我在桌面创建一个文件夹，输入写入一个文件，然后提交SVN Checkout，
会弹出一个登录对话框，此时点击OK
此时会提示输入用户名和密码:
输入刚才创建的用户admin或者user001登录即可，这里用user001登录即可。如果有文件要提交，这里直接把文件放入project001里，在文件夹上右击，弹出如下对话框，然后选择文件点击"确定"即可
提交后的结果为:
这里，就将本地的文件提交到svn上，如果有意外操作。比如不小心把本地文件删除了，可以在从svn上再拉取一份即可。
删除2.xlsx文件，然后再从svn上拉取一次，
输入用户名和密码
确定后，就从svn上拉取了一份2.xlsx文件
如果要删除SVN上的某个文件，需要将本地的文件删除，然后再执行cmmit（提交）
弹出如下对话框
确定后，即可完成SVN服务器上的2.xlsx文件的删除
（7）导入SVN原始的目录树
[root@node02 ~]# cd /application/tools/
[root@node02 tools]# mkdir -p branch tags trunk/
[root@node02 tools]# ll
total 12
drwxr-xr-x 2 root root 4096 Dec 31 21:02 branch
drwxr-xr-x 2 root root 4096 Dec 31 21:02 tags
drwxr-xr-x 2 root root 4096 Dec 31 21:02 trunk
[root@node02 tools]#
[root@node02 tools]# svn import /application/tools/ file:///application/svn/svndata/project001/
svn: Could not use external editor to fetch log message; consider setting the $SVN_EDITOR environment variable or using the --message (-m) or --file (-F) options
svn: None of the environment variables SVN_EDITOR, VISUAL or EDITOR are set, and no 'editor-cmd' run-time configuration option was found
[root@node02 tools]#
报错，提示加参数 -m "xxxxx"
[root@node02 tools]# svn import /application/tools/ file:///application/svn/svndata/project001/ -m "import messages"
Adding /application/tools/trunk
Adding /application/tools/branch
Adding /application/tools/tags
Committed revision 5.
[root@node02 tools]#
导入成功，客户端检查一下
点击“版本库浏览器”
至此SVN原始目录树导入成功。
（8）打tags版本
如果我们有一个项目为ucode,开发完所有的基本功能之后，的版本问1.0，如下图所示:
以后的开发都是基于这个版本的开发，那么可以把这个版本锁定，然后定义为一个新的版本，操作如下:
选择"分支/标记（T）" 弹出如下对话框，输入"ucode_dev_1.0_release_v0001",如下图:
然后"确定"即可。
接下来可以在tags目录下看到刚才打的版本号：
(9)多项目管理，这里以project_test001和project_test002为例：
[root@node02 ~]# svnadmin create /application/svn/svndata/project_test001
[root@node02 ~]# svnadmin create /application/svn/svndata/project_test002
用户配置：
[root@node02 svnpasswd]# cat passwd
### This file is an example password file for svnserve.
### Its format is similar to that of svnserve.conf. As shown in the
### example below it contains one section labelled [users].
### The name and password for each user follow, one account per line.
[users]
# harry = harryssecret
# sally = sallyssecret
admin = admin
user001 = 123456
user002 = 123456
user003 = 123456
[root@node02 svnpasswd]#
注意，passwd文件中只定义用户和密码，用户分组以及权限控制放在authz文件中，做实验的时候一直把分组放passwd文件中，导致提交一直报错，花了不少时间；另外每个项目的配置文件中用户和认证文件都要指定到同一路径下的文件，便于集中管理，我这里两个项目project_test001和project_test002中配置文件中访问用户和认证文件都是:
password-db = /application/svn/svndata/svnpasswd/passwd
authz-db = /application/svn/svndata/svnpasswd/authz
权限控制：
[root@node02 svnpasswd]# pwd
/application/svn/svndata/svnpasswd
[root@node02 svnpasswd]# cat authz |egrep -v '^#|^$' authz
[aliases]
[groups]
dev_users = admin,user001
pro_users = user002,user003
[project_test001:/]
@dev_users = rw
@pro_users = r
[project_test002:/]
@pro_users = rw
[root@node02 svnpasswd]#
说明：dev_users对project_test001项目有读写权限，pro_users用户组对project_test002项目有读写权限，对project_test001项目有读权限，没有写权限(即不能讲本地更新代码提交到project_test001版本库中)
user001登陆project_test001，并提交内容
点击“OK”提示输入用户名和密码，这里输入user001和123456
登陆成功出现如下界面:
浏览project_test001项目目录内容：
写入文件新文件“2017年金秋联谊运动会.pdf”,然后commit提交
选中提交内容然后点击OK：
提示提交成功：
说明user001对项目project_test001有读写权限，下面测试user002对项目project_test001的读写权限
切换登陆用户为user002,(切换用户TortoiseSVN--->Settings-->Save Data--->Authentication data--->Clear all)
点击OK，提示登陆成功
点击ok，进入project_test001浏览文件
写入内容“系统垃圾清理.bat",
返回project_test001，然后提交：
弹出如下界面:
说明提交失败，即说明user002对project_test001项目只有读取权限，无修改权限。
(10)配置Apache，让svn支持http协议访问
[root@node02 conf.d]# pwd
/etc/httpd/conf.d
[root@node02 conf.d]# ll
total 20
-rw-r--r-- 1 root root 46 Dec 31 18:25 passwd
-rw-r--r-- 1 root root 392 Nov 19 07:49 README
-rw-r--r-- 1 root root 1049 Dec 31 18:35 subversion.conf
-rw-r--r-- 1 root root 1042 Dec 31 18:23 subversion.conf.bak
-rw-r--r-- 1 root root 299 Nov 3 22:33 welcome.conf
[root@node02 conf.d]#
[root@node02 conf.d]# cat subversion.conf
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so
#
# Example configuration to enable HTTP access for a directory
# containing Subversion repositories, "/var/www/svn". Each repository
# must be both:
#
# a) readable and writable by the 'apache' user, and
#
# b) labelled with the 'httpd_sys_content_t' context if using
# SELinux
#
#
# To create a new repository "http://localhost/repos/stuff" using
# this configuration, run as root:
#
# # cd /var/www/svn
# # svnadmin create stuff
# # chown -R apache.apache stuff
# # chcon -R -t httpd_sys_content_t stuff
#
<Location /repos>
DAV svn
SVNParentPath /application/svn/svndata
AuthType Basic
AuthName "Authorization Realm"
AuthUserFile /etc/httpd/conf.d/passwd
Require valid-user
</Location>
[root@node02 conf.d]#
生成认证用户和密码
[root@node02 conf.d]# htpasswd -c /etc/httpd/conf.d/passwd user001
New password:
Re-type new password:
Updating password for user user001
[root@node02 conf.d]#
另外在配置多个项目时，务必要统一配置文件，比如这里的项目是project001，则project001的配置文件必须跟其他项目文件保持同一份文件否则认证失败:
[root@node02 conf]# pwd
/application/svn/svndata/project001/conf
[root@node02 conf]# egrep -v "^#" svnserve.conf
[general]
anon-access = read
auth-access = write
password-db = /application/svn/svndata/svnpasswd/passwd
authz-db = /application/svn/svndata/svnpasswd/authz
[sasl]
[root@node02 conf]#
http访问svn时所用的认证配置文件为:
[root@node02 conf]# pwd
/application/svn/svndata/project001/conf
[root@node02 conf]# cd /etc/httpd/conf.d/
[root@node02 conf.d]# pwd
/etc/httpd/conf.d
[root@node02 conf.d]# ll
total 20
-rw-r--r-- 1 root root 22 Jan 5 01:01 passwd
-rw-r--r-- 1 root root 392 Nov 19 07:49 README
-rw-r--r-- 1 root root 1049 Dec 31 18:35 subversion.conf
-rw-r--r-- 1 root root 1042 Dec 31 18:23 subversion.conf.bak
-rw-r--r-- 1 root root 299 Nov 3 22:33 welcome.conf
[root@node02 conf.d]# cat passwd
user001:vQWeaqcB4YzpU
[root@node02 conf.d]# ll passwd
-rw-r--r-- 1 root root 22 Jan 5 01:01 passwd
[root@node02 conf.d]#
此时passwd文件中的用户名和密码要与svn的passwd中的用户名和密码保持相同
[root@node02 svnpasswd]# cat passwd
### This file is an example password file for svnserve.
### Its format is similar to that of svnserve.conf. As shown in the
### example below it contains one section labelled [users].
### The name and password for each user follow, one account per line.
[users]
# harry = harryssecret
# sally = sallyssecret
admin = admin
user001 = 123456
[root@node02 svnpasswd]#
即:passwd中的user001 密码123456要与/etc/httpd/conf.d/passwd中的是完全相同，然后重启Apache，访问即可，如果出现访问权限问题，可以在Apache的主配置文件中httpd.conf中的最后面添加如下内容:
<Directory "/application/svn/svndata">
Options Indexes FollowSymLinks
AllowOverride None
Order allow,deny
Allow from all
</Directory>