Android 快速模拟器Genymotion

genymotion是一款号称速度最快性能最好的android模拟器，它基于Oracle VM VirtualBox。支持GPS、重力感应、光、温度等诸多传感器；支持OpenGL 3D加速；电池电量模拟；能够运行在windows、linux、mac系统下；并提供的有eclipse下的插件，可以支持在eclipse下进行应用开发测试。

     （一）首先介绍下如何下载并运行genymotion模拟器

     在http://www.genymotion.com/网站上点击sign up按钮开始进行注册。

     填写相关注册信息

     完成注册后会提示你有邮件发到你上一步填写的邮箱去激活账户

     在邮箱里激活刚注册的账户

     激活刚注册的账户会提示你可以开始下载genymotion

    登陆刚注册的账户

    选择下载genymotion

    选择包含virtualbox的genymotion-1.0-vbox.exe进行下载

     下载完genymotion-1.0-vbox.exe，运行该exe按照默认的选项一路安装下去即可

     安装完成后在桌面上会发现genymotion命令行工具图标：Genymotion Shell；genymotion程序图标：Genymotion：Genymotion；以及虚拟机Oracle VM VirtualBox的图标。

 

     点击Genymotion图标运行genymotion会提示你需要创建虚拟设备,点击yes按钮开始创建虚拟设备。

     使用注册好的用户名和密码连接服务器

    连接好服务器后开始添加自己需要的虚拟机

     按Next按钮创建虚拟设备

     点击Next

     点击Create按钮

     创建完成

     运行虚拟设备

     设置android SDK目录

     再次运行genymotion中的虚拟设备

    使用起来确实比google提供的模拟器流畅不少

 

     （二）安装安兔兔进行测分

     genymotion模拟器的安兔兔测试得分

 

     google模拟器的安兔兔测试得分：

     安兔兔测得在同一台电脑上同是Nexus 480X800的虚拟设备genymotion分值高达13836，而http://blog.csdn.net/yearafteryear/article/details/9255431测试得到的google模拟器只有区区953,genymotion在各项参数上均表现好不少。

    （三）在eclipse下安装genymotion插件

     启动eclipse,选择Help->Install New Software菜单

    点击add按钮

     填入Genymobile、http://plugins.genymotion.com/eclipse点击OK按钮

     选择genymotion相关插件选项进行安装

     接受相关协议

     忽略相关警告

     提示重启eclipse即已经完成genymotion插件的安装，点击yes按钮重启eclipse

      重启eclipse会在工具栏上发现genymotion的图标，点击即可启动该插件。

     第一次启动genymotion插件需要填入genymotion的安装目录：C:Program FilesGenymobileGenymotion

      （四）调试应用程序，这里我调试一个OpenGL的程序。发现OpenGL的程序在genymotion上运行的很好。

    点击eclipse上的genymotion插件图标,在弹出的对话框选择以前创建的虚拟设备启动。

     在eclipse下的工程项目上单击鼠标右键，在弹出的菜单里选择Run as->Run Configurations.

    在Run Configurations对话框选择下面的选项即可

    之后运行工程项目即可发现当前的这个opengl项目在genymotion上能很流畅的运行

     （五）genymotion shell命令行工具

    可在genymotion shell下输入相关指令获取一些信息或者设置一些参数之类

     genymotion shell支持的命令行如下所示：

Command line options

• -h Print help
• -r ip_address Connect to specific Genymotion Virtual Device
• -c "command" Execute the given command in genyshell environment and return
• -f file Execute the content of the file. Each command per line

Available commands

• battery getmode
  Return the current battery mode of the selected virtual device. The mode can only be:           
  • host: The virtual battery reflect the host battery (if exists)
  • manual: In this mode, you can set the level and status battery values
• battery setmode
  Set the battery mode. The mode can only be:           
  • host: The virtual battery reflect the host battery (if exists)
  • manual: In this mode, you can set the level and status battery values
• battery getlevel
  Return the current battery amount of power. The value can only be between 0% and 100%.
              If the battery mode is "host", the returned value is the host value.         
• battery setlevel
              Set the current battery amount of power. The value can only be between 0% and 100%.
              Set the battery level force the "manual" mode: if the last mode was "host", then it's turned to "manual"         
• battery getstatus
  Return the current battery status. There are 4 possible status:            
  • Discharging: The power supply is disconnected and the battery is discharging.             
  • Charging: The power supply is connected and the battery is charging.             
  • Full: The battery is full.             
  • Unknown: Sometimes, the battery status cannot be established, it happens when there is no host battery.           
• battery setstatus
  Set the current battery status. There are 4 possible status:           
  • Discharging: The power supply is disconnected and the battery is discharging.             
  • Charging: The power supply is connected and the battery is charging.             
  • Full: The battery is full.             
  • Unknown: Sometimes, the battery status cannot be established, it happens when there is no host battery.           

• devices list
  List available Genymotion virtual devices and provides details like current states or IP address.
• devices ping
  Send a ping message to check if virtual device if responding
• devices refresh
  Refresh Genymotion virtual device list. Use it to keep the list up-to-date.
• devices select
  Select the Genymotion virtual device you want to interact with.
• devices show
  List available Genymotion virtual devices and provides details like current states or IP address

• gps activate
  Activate the GPS sensor (if not already activated)
• gps desactivate
  Desactivate the GPS sensor (if activated)
• gps getlatitude
  Return the actual latitude (if GPS is activated AND already has a latitude) or 0
• gps setlatitude
  Set latitude (and activate GPS if not allready activated)
• gps getlongitude
  Return the actual longitude (if GPS is activated AND allready has a longitude) or 0
• gps setlongitude
  Set longitude (and activate GPS if not allready activated)
• gps getaltitude
  Return the actual altitude (if GPS is activated AND allready has a altitude) or 0
• gps setaltitude
  Set altitude (and activate GPS if not allready activated)
• gps getaccuracy
  Return the actual accuracy in meters (if GPS is activated AND allready has a accuracy) or 0
• gps setaccuracy
  Set accuracy (and activate GPS if not allready activated)
• gps getorientation
  Return the actual orientation in meters (if GPS is activated AND allready has a orientation) or 0
• gps setorientation
  Set orientation (and activate GPS if not allready activated)

• android version
  Return the Android version of the selected virtual device
• build number
  Return the genymotion shell build number
• help
  Prompt the help.
• pause
  Pause execution (in number of seconds).
• version
  Return GenyShell version.
• exit or quit
  Close Genymotion Shell.