zoukankan      html  css  js  c++  java
  • Linux 查看系统硬件信息[转]

    原文:http://www.cnblogs.com/ggjucheng/archive/2013/01/14/2859613.html

    linux查看系统的硬件信息,并不像windows那么直观,这里我罗列了查看系统信息的实用命令,并做了分类,实例解说。

    cpu

    lscpu命令,查看的是cpu的统计信息.

    复制代码
    blue@blue-pc:~$ lscpu
    Architecture:          i686            #cpu架构
    CPU op-mode(s):        32-bit, 64-bit
    Byte Order:            Little Endian   #小尾序
    CPU(s):                4               #总共有4核
    On-line CPU(s) list:   0-3
    Thread(s) per core:    1               #每个cpu核,只能支持一个线程,即不支持超线程
    Core(s) per socket:    4               #每个cpu,有4个核
    Socket(s):             1               #总共有1一个cpu
    Vendor ID:             GenuineIntel    #cpu产商 intel
    CPU family:            6
    Model:                 42
    Stepping:              7
    CPU MHz:               1600.000
    BogoMIPS:              5986.12
    Virtualization:        VT-x            #支持cpu虚拟化技术
    L1d cache:             32K
    L1i cache:             32K
    L2 cache:              256K
    L3 cache:              6144K
    复制代码

    查看/proc/cpuinfo,可以知道每个cpu信息,如每个CPU的型号,主频等。

    复制代码
    #cat /proc/cpuinfo
    processor    : 0
    vendor_id    : GenuineIntel
    cpu family    : 6
    model        : 42
    model name    : Intel(R) Core(TM) i5-2320 CPU @ 3.00GHz
    .....
    复制代码

    上面输出的是第一个cpu部分信息,还有3个cpu信息省略了。

    内存

    概要查看内存情况

    free -m
                 total       used       free     shared    buffers     cached
    Mem:          3926       3651        274          0         12        404
    -/+ buffers/cache:       3235        691
    Swap:         9536         31       9505

    这里的单位是MB,总共的内存是3926MB。

    查看内存详细使用

    复制代码
    # cat /proc/meminfo 
    MemTotal:        4020868 kB
    MemFree:          230884 kB
    Buffers:            7600 kB
    Cached:           454772 kB
    SwapCached:          836 kB
    .....
    复制代码

    查看内存硬件信息

    复制代码
    dmidecode -t memory
    # dmidecode 2.11
    SMBIOS 2.7 present.
    
    Handle 0x0008, DMI type 16, 23 bytes
    Physical Memory Array
        Location: System Board Or Motherboard
    ....
        Maximum Capacity: 32 GB
    ....
    
    Handle 0x000A, DMI type 17, 34 bytes
    ....
    Memory Device
        Array Handle: 0x0008
        Error Information Handle: Not Provided
        Total Width: 64 bits
        Data Width: 64 bits
        Size: 4096 MB
    .....
    复制代码

    我的主板有4个槽位,只用了一个槽位,上面插了一条4096MB的内存。

    磁盘

    查看硬盘和分区分布

    复制代码
    # lsblk
    NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
    sda      8:0    0 465.8G  0 disk 
    ├─sda1   8:1    0     1G  0 part /boot
    ├─sda2   8:2    0   9.3G  0 part [SWAP]
    ├─sda3   8:3    0  74.5G  0 part /
    ├─sda4   8:4    0     1K  0 part 
    ├─sda5   8:5    0 111.8G  0 part /home
    └─sda6   8:6    0 269.2G  0 part 
    复制代码

    显示很直观

    如果要看硬盘和分区的详细信息

    复制代码
    # fdisk -l
    
    Disk /dev/sda: 500.1 GB, 500107862016 bytes
    255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    Disk identifier: 0x00023728
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/sda1   *        2048     2148351     1073152   83  Linux
    /dev/sda2         2148352    21680127     9765888   82  Linux swap / Solaris
    /dev/sda3        21680128   177930239    78125056   83  Linux
    /dev/sda4       177932286   976771071   399419393    5  Extended/dev/sda5       177932288   412305407   117186560   83  Linux
    /dev/sda6       412307456   976771071   282231808   83  Linux
    复制代码

    网卡

    查看网卡硬件信息

    # lspci | grep -i 'eth'
    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)

    查看系统的所有网络接口

    # ifconfig -a
    eth0      Link encap:以太网  硬件地址 b8:97:5a:17:b3:8f  
              .....
    
    lo        Link encap:本地环回  
              .....

    或者是

    ip link show
    1: lo: <LOOPBACK> mtu 16436 qdisc noqueue state DOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether b8:97:5a:17:b3:8f brd ff:ff:ff:ff:ff:ff

    如果要查看某个网络接口的详细信息,例如eth0的详细参数和指标

    复制代码
    # ethtool eth0
    Settings for eth0:
        Supported ports: [ TP MII ]
        Supported link modes:   10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
                                1000baseT/Half 1000baseT/Full #支持千兆半双工,全双工模式
        Supported pause frame use: No 
        Supports auto-negotiation: Yes #支持自适应模式,一般都支持
        Advertised link modes:  10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
                                1000baseT/Half 1000baseT/Full
        Advertised pause frame use: Symmetric Receive-only
        Advertised auto-negotiation: Yes #默认使用自适应模式
        Link partner advertised link modes:  10baseT/Half 10baseT/Full 
                                             100baseT/Half 100baseT/Full 
        .....
        Speed: 100Mb/s #现在网卡的速度是100Mb,网卡使用自适应模式,所以推测路由是100Mb,导致网卡从支持千兆,变成要支持百兆
        Duplex: Full   #全双工
        .....
        Link detected: yes    #表示有网线连接,和路由是通的
    复制代码

    其他

    查看pci信息,即主板所有硬件槽信息。

    复制代码
    lspci
    00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) #主板芯片
    00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) #显卡
    00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) #usb控制器
    00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04)
    00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04)
    00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) #声卡
    00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) #pci 插槽
    00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4)
    00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4)
    00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04)
    00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04)
    00:1f.2 IDE interface: Intel Corporation Panther Point 4 port SATA Controller [IDE mode] (rev 04) #硬盘接口
    00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04)
    00:1f.5 IDE interface: Intel Corporation Panther Point 2 port SATA Controller [IDE mode] (rev 04) #硬盘接口
    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) #网卡
    03:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8893 (rev 41)
    复制代码

    如果要更详细的信息:lspci -v 或者 lspci -vv

    如果要看设备树:lscpi -t

    查看bios信息

    复制代码
    # dmidecode -t bios
    ......
    BIOS Information
        Vendor: American Megatrends Inc.
        Version: 4.6.5
        Release Date: 04/25/2012
        .......
        BIOS Revision: 4.6
    ......
    复制代码

    dmidecode以一种可读的方式dump出机器的DMI(Desktop Management Interface)信息。这些信息包括了硬件以及BIOS,既可以得到当前的配置,也可以得到系统支持的最大配置,比如说支持的最大内存数等。

    如果要查看所有有用信息

    dmidecode -q

    里面包含了很多硬件信息。

  • 相关阅读:
    百度Hi之CSRF蠕虫攻击
    Portlet之讲解
    try-catch语句讲解
    unset之讲解
    MySQL bin-log 日志清理方式
    php数组array_push()和array_pop()以及array_shift()函数
    php中的func_num_args、func_get_arg与func_get_args函数
    PHP is_callable 方法
    如何实现php异步处理
    Mysql并发时经典常见的死锁原因及解决方法
  • 原文地址:https://www.cnblogs.com/lanqie/p/7994158.html
Copyright © 2011-2022 走看看