实验拓扑图如下
下一步对终端设备与路由器的端口进行基本的ip设置
配置完成后要注意检查是否有小错误,不然会对后面的测试带来麻烦。在进行基础配置的时候一定要细心细心细心。
下一步我们就要进行OSPF的配置了
我们使用OSPF 命令创建ospf 然后使用area命令创建区域并进入区域视图 然后使用network命令将相邻的网段添加进去,然后进入路由表查看,这里我们仅举例R1路由器
然后我们通过终端设备使用ping命令测试结果
各个设备都已ping通 实验成功。