Issuing Warnings¶Jython

Chapter 7:  Exception Handling and Debugging — Jython Book v1.0 documentation

Issuing Warnings¶

Warnings can be raised at any time in your program and can be used to display
some type of warning message, but they do not necessarily cause execution to
abort. A good example is when you wish to deprecate a method or implementation
but still make it usable for compatibility. You could create a warning to alert
the user and let them know that such methods are deprecated and point them to
the new definition, but the program would not abort. Warnings are easy to
define, but they can be complex if you wish to define rules on them using
filters. Warning filters are used to modify the behavior of a particular
warning. Much like exceptions, there are a number of defined warnings that can
be used for categorizing. In order to allow these warnings to be easily
converted into exceptions, they are all instances of the Exception type.
Remember that exceptions are not necessarily errors, but rather alerts or
messages. For instance, the StopIteration exception is raised by a program to
stop the iteration of a loop…not to flag an error with the program.

To issue a warning, you must first import the warnings module into your
program. Once this has been done then it is as simple as making a call to the
warnings.warn() function and passing it a string with the warning message.
However, if you’d like to control the type of warning that is issued, you can
also pass the warning class. Warnings are listed in Table 7-2.

Listing 7-21. Issuing a Warning

# Always import the warnings module first
import warnings

# A couple of examples for setting up warnings
warnings.warn("this feature will be deprecated")
warnings.warn("this is a more involved warning", RuntimeWarning)

# Using A Warning in a Function

# Suppose that use of the following function has been deprecated,
# warnings can be used to alert the function users

# The following function calculates what the year will be if we
# add the specified number of days to the current year.  Of course,
# this is pre-Y2K code so it is being deprecated.  We certainly do not
# want this code around when we get to year 3000!
>>> def add_days(current_year, days):
...     warnings.warn("This function has been deprecated as of version x.x",
DeprecationWarning)
...     num_years = 0
...     if days > 365:
...         num_years = days/365
...     return current_year + num_years
...

# Calling the function will return the warning that has been set up,
# but it does not raise an error...the expected result is still returned.
>>> add_days(2009, 450)
__main__:2: DeprecationWarning: This function has been deprecated as of version x.x
2010

Table 7-2. Python Warning Categories

Warning	Description
Warning	Root warning class
UserWarning	A user-defined warning
DeprecationWarning	Warns about use of a deprecated feature
SyntaxWarning	Syntax issues
RuntimeWarning	Runtime issues
FutureWarning	Warns that a particular feature will be changing in a future release

Importing the warnings module into your code gives you access to a number of
built-in warning functions that can be used. If you’d like to filter a warning
and change its behavior then you can do so by creating a filter. Table 7-3
lists functions that come with the warnings module.

Table 7-3. Warning Functions

Function	Description
warn(message[, category[, stacklevel]])	Issues a warning. Parameters include a message string, the optional category of warning, and the optional stack level that tells which stack frame the warning should originate from, usually either the calling function or the source of the function itself.
warn_explicit(message, category, filename, lineno[, module[, registry]])	This offers a more detailed warning message and makes category a mandatory parameter. filename, lineno, and module tell where the warning is located. registry represents all of the current warning filters that are active.
showwarning(message, category, filename, lineno[, file])	Gives you the ability to write the warning to a file.
formatwarning(message, category, filename, lineno)	Creates a formatted string representing the warning.
simplefilter(action[, category[, lineno[, append]]])	Inserts simple entry into the ordered list of warnings filters. Regular expressions are not needed for simplefilter as the filter always matches any message in any module as long as the category and line number match. filterwarnings() described below uses a regular expression to match against warnings.
resetwarnings()	Resets all of the warning filters.
filterwarnings(action[, message[, category[, module[, lineno[, append]]]]])	This adds an entry into a warning filter list. Warning filters allow you to modify the behavior of a warning. The action in the warning filter can be one from those listed in Table 7-4, message is a regular expression, category is the type of a warning to be issued, module can be a regular expression, lineno is a line number to match against all lines, append specifies whether the filter should be appended to the list of all filters.

Table 7-4. Python Filter Actions

Filter Actions
‘always’	Always print warning message
‘default’	Print warning once for each location where warning occurs
‘error’	Converts a warning into an exception
‘ignore’	Ignores the warning
‘module’	Print warning once for each module in which warning occurs
‘once’	Print warning only one time

Let’s take a look at a few ways to use warning filters in the examples below.

Listing 7-22. Warning Filter Examples

# Set up a simple warnings filter to raise a warning as an exception

>>> warnings.simplefilter('error', UserWarning)
>>> warnings.warn('This will be raised as an exception')
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
  File "/Applications/Jython/jython2.5.1rc2/Lib/warnings.py", line 63, in warn
    warn_explicit(message, category, filename, lineno, module, registry,
  File "/Applications/Jython/jython2.5.1rc2/Lib/warnings.py", line 104, in warn_explicit
    raise message
UserWarning: This will be raised as an exception

# Turn off all active filters using resetwarnings()
>>> warnings.resetwarnings()
>>> warnings.warn('This will not be raised as an exception')
__main__:1: UserWarning: This will not be raised as an exception

# Use a regular expression to filter warnings
# In this case, we ignore all warnings containing the word “one”
>>> warnings.filterwarnings('ignore', '.*one*.',)
>>> warnings.warn('This is warning number zero')
__main__:1: UserWarning: This is warning number zero
>>> warnings.warn('This is warning number one')
>>> warnings.warn('This is warning number two')
__main__:1: UserWarning: This is warning number two
>>>

There can be many different warning filters in use, and each call to the
filterwarnings() function will append another warning to the ordered list of
filters if so desired. The specific warning is matched against each filter
specification in the list in turn until a match is found. In order to see which
filters are currently in use, issue the command print warnings.filters. One can
also specify a warning filter from the command line by use of the –W option.
Lastly, all warnings can be reset to defaults by using the resetwarnings()
function.

It is also possible to set up a warnings filter using a command-line argument.
This can be quite useful for filtering warnings on a per-script or per-module
basis. For instance, if you are interested in filtering warnings on a
per-script basis then you could issue the -W command line argument while
invoking the script.