zoukankan      html  css  js  c++  java
  • centos7 ifconifg没有ip

    在安装时 设置了静态ip 但是 使用ifconfig命令时  只有 127.0.0.1的ip地址 

    这时候查看/etc/sysconfig/network-scripts  目录下是否存在ifcfg-eth0 文件如果不存在 查看是否存在ifcfg-开头的文件 

    我的系统存在ifcfg-eno16777736这样一个文件

    more ifcfg-eno16777736

    [liaomin@localhost network-scripts]$ more ifcfg-eno16777736
    TYPE=Ethernet
    BOOTPROTO=none
    DEFROUTE=yes
    IPV4_FAILURE_FATAL=no
    IPV6INIT=yes
    IPV6_AUTOCONF=yes
    IPV6_DEFROUTE=yes
    IPV6_FAILURE_FATAL=no
    NAME=eno16777736
    UUID=7170eda3-8183-41fc-b0b8-ee924d05ddc2
    ONBOOT=no
    IPADDR0=192.168.0.88
    PREFIX0=24
    HWADDR=00:0C:29:61:34:7D
    IPV6_PEERDNS=yes
    IPV6_PEERROUTES=yes

    刚好为我在安装系统时添加的ip信息

    此时 使用命令 cp  ifcfg-eno16777736 ifcfg-eth0  创建 ifcfg-eth0文件 同时将内容中的ONBOOT=no 改为 ONBOOT=yes

    执行命令 service network restart 

    执行 ifconfig 出现正确网络信息

    eno16777736: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 192.168.0.88  netmask 255.255.255.0  broadcast 192.168.0.255
            inet6 fe80::20c:29ff:fe61:347d  prefixlen 64  scopeid 0x20<link>
            ether 00:0c:29:61:34:7d  txqueuelen 1000  (Ethernet)
            RX packets 102  bytes 10385 (10.1 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 128  bytes 13681 (13.3 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


    lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
            inet 127.0.0.1  netmask 255.0.0.0
            inet6 ::1  prefixlen 128  scopeid 0x10<host>
            loop  txqueuelen 0  (Local Loopback)
            RX packets 818  bytes 71132 (69.4 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 818  bytes 71132 (69.4 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


    如果安装环境为 vm虚拟机的host-only 下 想在虚拟机中上网  

    找到win环境下的网卡vmnet1  通过属性 tcp/ip协议查看 他的ip地址 

    假设这里为 192.168.0.12 而虚拟机中设置的ip是IPADDR0=192.168.0.88 需要在 ifcfg-eth0添加网关为 当前win的vmnet1的ip地址

    即添加 GETEWAY=192.168.0.12 

    在win上必须有一个能上网的网卡 比如我的笔记本为 无线网卡 右键属性 高级 允许其他网络通过此计算机的internet来连接勾上 下拉框 选上 vmnet的网卡

    确定 如果弹出确认 选否即可

    通过ipconfig -all命令 查看 无线网卡的 dns服务器 比如我的 如下

    Ethernet adapter 无线网络连接:
           Connection-specific DNS Suffix  . :
            Description . . . . . . . . . . . : Broadcom 802.11n 网络
            Physical Address. . . . . . . . . : 08-3E-8E-4A-38-AB
            Dhcp Enabled. . . . . . . . . . . : Yes
            Autoconfiguration Enabled . . . . : Yes
            IP Address. . . . . . . . . . . . : 192.168.1.100
            Subnet Mask . . . . . . . . . . . : 255.255.255.0
            Default Gateway . . . . . . . . . : 192.168.1.1
            DHCP Server . . . . . . . . . . . : 192.168.1.1
            DNS Servers . . . . . . . . . . . : 211.162.66.66
                                                211.162.77.77

    在  ifcfg-eth0添加DNS服务器 我这里有两个 

    添加两行 

    DNS1=211.162.66.66

    DNS2=211.162.77.77

    此时在虚拟机的 linux 重启 service network restart

    ping www.baidu.com 成功


  • 相关阅读:
    splunk linux安装
    [读书笔记]-时间管理-把时间当做朋友
    [读书笔记]-技术学习-Redis
    [读书笔记]-阅读方法-王者速读法
    vuex、localStorage、sessionStorage之间的区别
    vuex的使用
    Vue常用指令总结
    vue-router参数传递
    Vue-router的基本使用
    v-on精炼
  • 原文地址:https://www.cnblogs.com/liaomin416100569/p/9331292.html
Copyright © 2011-2022 走看看