硬件开发板：STM32F103C8
软件平台
好了现在开始利用STM32CubeMX来生成我们的工程
1、新建工程
选择MCU的型号
选择选择时钟
开启usb的模块
选择USB的类
配置时钟树(主要是设置usb的48Mhz)
设置工程路径和编译环境
打开工程
我们现在在main.c进行修改
/* USER CODE BEGIN Includes */ #include "usbd_hid.h" /* USER CODE END Includes */
/* USER CODE BEGIN 1 */ // HID Mouse struct mouseHID_t { uint8_t buttons; int8_t x; int8_t y; int8_t wheel; }; struct mouseHID_t mouseHID; mouseHID.buttons = 0; mouseHID.x = 10; mouseHID.y = 0; mouseHID.wheel = 0; /* USER CODE END 1 */
/* USER CODE BEGIN 3 */
// Send HID report
mouseHID.x = 10;
USBD_HID_SendReport(&hUsbDeviceFS, (uint8_t*)&mouseHID, sizeof(struct mouseHID_t));
HAL_Delay(1000);
}
/* USER CODE END 3 */
编译下载后复位
在电脑设备管理中可以看到一个新的USB输入设备(到这部时候可以看到我们的STM32的USB枚举成功)
可以看到我们鼠标光标移动
如果出现
***JLink Error: Bad JTAG communication: Write to IR: Expected 0x1, got 0xF (TAP Command : 10) @ Off 0x5.
将在HAL_MspInit()代码中 __HAL_AFIO_REMAP_SWJ_DISABLE();给注释掉
为了回顾之前的浅析USB HID ReportDesc (HID报告描述符)
我们将对static uint8_t HID_MOUSE_ReportDesc[HID_MOUSE_REPORT_DESC_SIZE]进行分析
源码
__ALIGN_BEGIN static uint8_t HID_MOUSE_ReportDesc[HID_MOUSE_REPORT_DESC_SIZE] __ALIGN_END = { 0x05, 0x01, 0x09, 0x02, 0xA1, 0x01, 0x09, 0x01, 0xA1, 0x00, 0x05, 0x09, 0x19, 0x01, 0x29, 0x03, 0x15, 0x00, 0x25, 0x01, 0x95, 0x03, 0x75, 0x01, 0x81, 0x02, 0x95, 0x01, 0x75, 0x05, 0x81, 0x01, 0x05, 0x01, 0x09, 0x30, 0x09, 0x31, 0x09, 0x38, 0x15, 0x81, 0x25, 0x7F, 0x75, 0x08, 0x95, 0x03, 0x81, 0x06, 0xC0, 0x09, 0x3c, 0x05, 0xff, 0x09, 0x01, 0x15, 0x00, 0x25, 0x01, 0x75, 0x01, 0x95, 0x02, 0xb1, 0x22, 0x75, 0x06, 0x95, 0x01, 0xb1, 0x01, 0xc0 };
注释整理后
__ALIGN_BEGIN static uint8_t HID_MOUSE_ReportDesc[HID_MOUSE_REPORT_DESC_SIZE] __ALIGN_END = { 0x05, 0x01, // USAGE_PAGE (Generic Desktop) 0x09, 0x02, // USAGE (Mouse) 0xa1, 0x01, // COLLECTION (Application) 0x09, 0x01, // USAGE (Pointer) 0xa1, 0x00, // COLLECTION (Physical) 0x05, 0x09, // USAGE_PAGE (Button) 0x19, 0x01, // USAGE_MINIMUM (Button 1) 0x29, 0x03, // USAGE_MAXIMUM (Button 3) 0x15, 0x00, // LOGICAL_MINIMUM (0) 0x25, 0x01, // LOGICAL_MAXIMUM (1) 0x95, 0x03, // REPORT_COUNT (3) 0x75, 0x01, // REPORT_SIZE (1) 0x81, 0x02, // INPUT (Data,Var,Abs) 0x95, 0x01, // REPORT_COUNT (1) 0x75, 0x05, // REPORT_SIZE (5) 0x81, 0x03, // INPUT (Cnst,Var,Abs) 0x05, 0x01, // USAGE_PAGE (Generic Desktop) 0x09, 0x30, // USAGE (X) 0x09, 0x31, // USAGE (Y) 0x09, 0x38, // USAGE (Wheel) 0x15, 0x81, // LOGICAL_MINIMUM (-127) 0x25, 0x7f, // LOGICAL_MAXIMUM (127) 0x75, 0x08, // REPORT_SIZE (8) 0x95, 0x03, // REPORT_COUNT (3) 0x81, 0x06, // INPUT (Data,Var,Rel) 0xC0, // END_COLLECTION 0x09, 0x3c, // USAGE (Motion Wakeup) 0x05, 0xff, // USAGE_PAGE (0xff) //在HID Usage Tables 1.12中15 页中UASE PAGES表格为Reserved 0x09, 0x01, // USAGE (SMBBatteryMode) 0x15, 0x00, // LOGICAL_MINIMUM (0) 0x25, 0x01, // LOGICAL_MAXIMUM (1) 0x75, 0x01, // REPORT_SIZE (1) 0x95, 0x02, // REPORT_COUNT (2) 0xb1, 0x22, // FEATURE(Data,Var,Abs,NPrf) 0x75, 0x06, // REPORT_SIZE (6) 0x95, 0x01, // REPORT_COUNT (1) 0xb1, 0x01, // FEATURE(Cnst,Ary,Abs) 0xc0 // END_COLLECTION };
现在各位同学请翻开《Universal Serial Bus Specification Revision 2.0 》<9.5 Descriptors >
我们参考Table 9-8. Standard Device Descriptor 将__ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] 数据也按照这个表格填入数据
__ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC]的源码如下：
/* USB Standard Device Descriptor */ __ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END = { 0x12, /*bLength */ USB_DESC_TYPE_DEVICE, /*bDescriptorType*/ 0x00, /* bcdUSB */ 0x02, 0x00, /*bDeviceClass*/ 0x00, /*bDeviceSubClass*/ 0x00, /*bDeviceProtocol*/ USB_MAX_EP0_SIZE, /*bMaxPacketSize*/ LOBYTE(USBD_VID), /*idVendor*/ HIBYTE(USBD_VID), /*idVendor*/ LOBYTE(USBD_PID_FS), /*idVendor*/ HIBYTE(USBD_PID_FS), /*idVendor*/ 0x00, /*bcdDevice rel. 2.00*/ 0x02, USBD_IDX_MFC_STR, /*Index of manufacturer string*/ USBD_IDX_PRODUCT_STR, /*Index of product string*/ USBD_IDX_SERIAL_STR, /*Index of serial number string*/ USBD_MAX_NUM_CONFIGURATION /*bNumConfigurations*/ } ; /* USB_DeviceDescriptor */
这个分析起来有点麻烦
/* USB HID device Configuration Descriptor */ __ALIGN_BEGIN static uint8_t USBD_HID_CfgDesc[USB_HID_CONFIG_DESC_SIZ] __ALIGN_END = { 0x09, /* bLength: Configuration Descriptor size */ USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */ USB_HID_CONFIG_DESC_SIZ, /* wTotalLength: Bytes returned */ 0x00, 0x01, /*bNumInterfaces: 1 interface*/ 0x01, /*bConfigurationValue: Configuration value*/ 0x00, /*iConfiguration: Index of string descriptor describing the configuration*/ 0xE0, /*bmAttributes: bus powered and Support Remote Wake-up */ 0x32, /*MaxPower 100 mA: this current is used for detecting Vbus*/ /************** Descriptor of Joystick Mouse interface ****************/ /* 09 */ 0x09, /*bLength: Interface Descriptor size*/ USB_DESC_TYPE_INTERFACE,/*bDescriptorType: Interface descriptor type*/ 0x00, /*bInterfaceNumber: Number of Interface*/ 0x00, /*bAlternateSetting: Alternate setting*/ 0x01, /*bNumEndpoints*/ 0x03, /*bInterfaceClass: HID*/ 0x01, /*bInterfaceSubClass : 1=BOOT, 0=no boot*/ 0x02, /*nInterfaceProtocol : 0=none, 1=keyboard, 2=mouse*/ 0, /*iInterface: Index of string descriptor*/ /******************** Descriptor of Joystick Mouse HID ********************/ /* 18 */ 0x09, /*bLength: HID Descriptor size*/ HID_DESCRIPTOR_TYPE, /*bDescriptorType: HID*/ 0x11, /*bcdHID: HID Class Spec release number*/ 0x01, 0x00, /*bCountryCode: Hardware target country*/ 0x01, /*bNumDescriptors: Number of HID class descriptors to follow*/ 0x22, /*bDescriptorType*/ HID_MOUSE_REPORT_DESC_SIZE,/*wItemLength: Total length of Report descriptor*/ 0x00, /******************** Descriptor of Mouse endpoint ********************/ /* 27 */ 0x07, /*bLength: Endpoint Descriptor size*/ USB_DESC_TYPE_ENDPOINT, /*bDescriptorType:*/ HID_EPIN_ADDR, /*bEndpointAddress: Endpoint Address (IN)*/ 0x03, /*bmAttributes: Interrupt endpoint*/ HID_EPIN_SIZE, /*wMaxPacketSize: 4 Byte max */ 0x00, HID_FS_BINTERVAL, /*bInterval: Polling Interval (10 ms)*/ /* 34 */ } ;
Table 9-10. Standard Configuration Descriptor
Table 9-12. Standard Interface Descriptor
这边需要参考<Device Class Definition for Human Interface Devices (HID) Version 1.11 > "6.2.1 HID Descriptor"
Table 9-13. Standard Endpoint Descriptor
现在利用软件直接看这个上面的信息
| Connection Status | Device connected |
| Current Configuration | 1 |
| Speed | Full (12 Mbit/s) |
| Device Address | 12 |
| Number Of Open Pipes | 1 |
| Offset | Field | Size | Value | Description |
|---|---|---|---|---|
| 0 | bLength | 1 | 12h | |
| 1 | bDescriptorType | 1 | 01h | Device |
| 2 | bcdUSB | 2 | 0200h | USB Spec 2.0 |
| 4 | bDeviceClass | 1 | 00h | Class info in Ifc Descriptors |
| 5 | bDeviceSubClass | 1 | 00h | |
| 6 | bDeviceProtocol | 1 | 00h | |
| 7 | bMaxPacketSize0 | 1 | 40h | 64 bytes |
| 8 | idVendor | 2 | 0483h | SGS Thomson Microelectronics |
| 10 | idProduct | 2 | 572Bh | |
| 12 | bcdDevice | 2 | 0200h | 2.00 |
| 14 | iManufacturer | 1 | 01h | "STMicroelectronics" |
| 15 | iProduct | 1 | 02h | "STM32 Human interface" |
| 16 | iSerialNumber | 1 | 03h | "00000000001A" |
| 17 | bNumConfigurations | 1 | 01h |
| Offset | Field | Size | Value | Description |
|---|---|---|---|---|
| 0 | bLength | 1 | 09h | |
| 1 | bDescriptorType | 1 | 02h | Configuration |
| 2 | wTotalLength | 2 | 0022h | |
| 4 | bNumInterfaces | 1 | 01h | |
| 5 | bConfigurationValue | 1 | 01h | |
| 6 | iConfiguration | 1 | 00h | |
| 7 | bmAttributes | 1 | E0h | Self Powered, Remote Wakeup |
| 4..0: Reserved | ...00000 | |||
| 5: Remote Wakeup | ..1..... | Yes | ||
| 6: Self Powered | .1...... | Yes | ||
| 7: Reserved (set to one) (bus-powered for 1.0) |
1....... | |||
| 8 | bMaxPower | 1 | 32h | 100 mA |
| Offset | Field | Size | Value | Description |
|---|---|---|---|---|
| 0 | bLength | 1 | 09h | |
| 1 | bDescriptorType | 1 | 04h | Interface |
| 2 | bInterfaceNumber | 1 | 00h | |
| 3 | bAlternateSetting | 1 | 00h | |
| 4 | bNumEndpoints | 1 | 01h | |
| 5 | bInterfaceClass | 1 | 03h | HID |
| 6 | bInterfaceSubClass | 1 | 01h | Boot Interface |
| 7 | bInterfaceProtocol | 1 | 02h | Mouse |
| 8 | iInterface | 1 | 00h |
| Offset | Field | Size | Value | Description |
|---|---|---|---|---|
| 0 | bLength | 1 | 09h | |
| 1 | bDescriptorType | 1 | 21h | HID |
| 2 | bcdHID | 2 | 0111h | 1.11 |
| 4 | bCountryCode | 1 | 00h | |
| 5 | bNumDescriptors | 1 | 01h | |
| 6 | bDescriptorType | 1 | 22h | Report |
| 7 | wDescriptorLength | 2 | 004Ah | 74 bytes |
| Offset | Field | Size | Value | Description |
|---|---|---|---|---|
| 0 | bLength | 1 | 07h | |
| 1 | bDescriptorType | 1 | 05h | Endpoint |
| 2 | bEndpointAddress | 1 | 81h | 1 In |
| 3 | bmAttributes | 1 | 03h | Interrupt |
| 1..0: Transfer Type | ......11 | Interrupt | ||
| 7..2: Reserved | 000000.. | |||
| 4 | wMaxPacketSize | 2 | 0004h | 4 bytes |
| 6 | bInterval | 1 | 0Ah | 10 ms |
| Item Tag (Value) | Raw Data |
|---|---|
| Usage Page (Generic Desktop) | 05 01 |
| Usage (Mouse) | 09 02 |
| Collection (Application) | A1 01 |
| Usage (Pointer) | 09 01 |
| Collection (Physical) | A1 00 |
| Usage Page (Button) | 05 09 |
| Usage Minimum (Button 1) | 19 01 |
| Usage Maximum (Button 3) | 29 03 |
| Logical Minimum (0) | 15 00 |
| Logical Maximum (1) | 25 01 |
| Report Count (3) | 95 03 |
| Report Size (1) | 75 01 |
| Input (Data,Var,Abs,NWrp,Lin,Pref,NNul,Bit) | 81 02 |
| Report Count (1) | 95 01 |
| Report Size (5) | 75 05 |
| Input (Cnst,Ary,Abs) | 81 01 |
| Usage Page (Generic Desktop) | 05 01 |
| Usage (X) | 09 30 |
| Usage (Y) | 09 31 |
| Usage (Wheel) | 09 38 |
| Logical Minimum (-127) | 15 81 |
| Logical Maximum (127) | 25 7F |
| Report Size (8) | 75 08 |
| Report Count (3) | 95 03 |
| Input (Data,Var,Rel,NWrp,Lin,Pref,NNul,Bit) | 81 06 |
| End Collection | C0 |
| Usage (Motion Wakeup) | 09 3C |
| Usage Page | 05 FF |
| Usage | 09 01 |
| Logical Minimum (0) | 15 00 |
| Logical Maximum (1) | 25 01 |
| Report Size (1) | 75 01 |
| Report Count (2) | 95 02 |
| Feature (Data,Var,Abs,NWrp,Lin,NPrf,NNul,NVol,Bit) | B1 22 |
| Report Size (6) | 75 06 |
| Report Count (1) | 95 01 |
| Feature (Cnst,Ary,Abs,NWrp,Lin,Pref,NNul,NVol,Bit) | B1 01 |
| End Collection | C0 |