在Laravel中已经有内置了发送邮件的功能，通过 Mail::send 可发送邮件，但要使用这个函数必须先进行相关配置。
在 /app/config/mail.php 中设置你的邮件参数，如下：
1 1 <?php 2 2 return array( 3 3 4 4 /* 5 5 |-------------------------------------------------------------------------- 6 6 | Mail Driver 7 7 |-------------------------------------------------------------------------- 8 8 | 9 9 | Laravel supports both SMTP and PHP's "mail" function as drivers for the 10 10 | sending of e-mail. You may specify which one you're using throughout 11 11 | your application here. By default, Laravel is setup for SMTP mail. 12 12 | 13 13 | Supported: "smtp", "mail", "sendmail", "mailgun", "mandrill", "log" 14 14 | 15 15 */ 16 16 17 17 'driver' => 'smtp', 18 18 19 19 /* 20 20 |-------------------------------------------------------------------------- 21 21 | SMTP Host Address 22 22 |-------------------------------------------------------------------------- 23 23 | 24 24 | Here you may provide the host address of the SMTP server used by your 25 25 | applications. A default option is provided that is compatible with 26 26 | the Mailgun mail service which will provide reliable deliveries. 27 27 | 28 28 */ 29 29 30 30 'host' => 'smtp.163.com', 31 31 32 32 /* 33 33 |-------------------------------------------------------------------------- 34 34 | SMTP Host Port 35 35 |-------------------------------------------------------------------------- 36 36 | 37 37 | This is the SMTP port used by your application to deliver e-mails to 38 38 | users of the application. Like the host we have set this value to 39 39 | stay compatible with the Mailgun e-mail application by default. 40 40 | 41 41 */ 42 42 43 43 'port' => 25, 44 44 45 45 /* 46 46 |-------------------------------------------------------------------------- 47 47 | Global "From" Address 48 48 |-------------------------------------------------------------------------- 49 49 | 50 50 | You may wish for all e-mails sent by your application to be sent from 51 51 | the same address. Here, you may specify a name and address that is 52 52 | used globally for all e-mails that are sent by your application. 53 53 | 54 54 */ 55 55 56 56 'from' => array ( 57 57 'address' => 'xxx@163.com', 58 58 'name' => 'xxx@163.com' 59 59 ), 60 60 61 61 /* 62 62 |-------------------------------------------------------------------------- 63 63 | E-Mail Encryption Protocol 64 64 |-------------------------------------------------------------------------- 65 65 | 66 66 | Here you may specify the encryption protocol that should be used when 67 67 | the application send e-mail messages. A sensible default using the 68 68 | transport layer security protocol should provide great security. 69 69 | 70 70 */ 71 71 72 72 'encryption' => 'tls', 73 73 74 74 /* 75 75 |-------------------------------------------------------------------------- 76 76 | SMTP Server Username 77 77 |-------------------------------------------------------------------------- 78 78 | 79 79 | If your SMTP server requires a username for authentication, you should 80 80 | set it here. This will get used to authenticate with your server on 81 81 | connection. You may also set the "password" value below this one. 82 82 | 83 83 */ 84 84 85 85 'username' => 'xxx@163.com', 86 86 87 87 /* 88 88 |-------------------------------------------------------------------------- 89 89 | SMTP Server Password 90 90 |-------------------------------------------------------------------------- 91 91 | 92 92 | Here you may set the password required by your SMTP server to send out 93 93 | messages from your application. This will be given to the server on 94 94 | connection so that the application will be able to send messages. 95 95 | 96 96 */ 97 97 98 98 'password' => 'xxx', 99 99 100 100 /* 101 101 |-------------------------------------------------------------------------- 102 102 | Sendmail System Path 103 103 |-------------------------------------------------------------------------- 104 104 | 105 105 | When using the "sendmail" driver to send e-mails, we will need to know 106 106 | the path to where Sendmail lives on this server. A default path has 107 107 | been provided here, which will work well on most of your systems. 108 108 | 109 109 */ 110 110 111 111 'sendmail' => '/usr/sbin/sendmail -bs', 112 112 113 113 /* 114 114 |-------------------------------------------------------------------------- 115 115 | Mail "Pretend" 116 116 |-------------------------------------------------------------------------- 117 117 | 118 118 | When this option is enabled, e-mail will not actually be sent over the 119 119 | web and will instead be written to your application's logs files so 120 120 | you may inspect the message. This is great for local development. 121 121 | 122 122 */ 123 123 124 124 'pretend' => false 125 125 );
其中的 driver、host、port 和 encryption 等自己可以根据相应邮件服务器的属性来设置。
在 Mail::send 中，需要注意其中的参数，如下：
1 if (!$this->postUsernameCheck() && !$this->postEmailCheck()) 2 { 3 $pwd = User::where('username', Input::get('username'))->where('email', Input::get('email'))->get(); 4 $msg = Input::get('username') . " , your password is : " . Hash::make($pwd[0]->password); 5 $messageData = array('msgnext' => $msg); 6 $emails = 'Passdd'; 7 8 Mail::send('emails.view', $messageData, function ($message) use ($pwd,$emails) { 9 $message->to($pwd[0]->email); 10 $message->subject($emails); 11 }); 12 13 return Redirect::to('main')->with('user' , Input::get('username')); 14 } 15 else 16 return Redirect::back();
send 的第一个参数是view的页面，你可以在view文件夹里添加blade文件，输入相应的代码来显示的数据，我的页面是 {{ $msgnext }}；
第二个参数是一维数组，不可是其他多维的；
第三个参数是匿名函数，变量名不可与第二个参数一样，可用 use 来连接函数外部的变量。
这样你的邮件就想发就发了！