IQBoard boot message
Welcome to iDirect iQ Linux
iq-linux login: root
Password:
[root@iq-linux:active0:~] >
[root@iq-linux:active0:~] > mewsh
[Remote]$
[Remote]$ DID
Model: IQ200Board
SN: 19857 # 0x4D91
DID: 637554065 # 0x26004D91
[Remote]$
[Remote]$ help
acm_limit:
description: Hard-limit the SNR reported by Xerus
arguments: <db*100 | off>
acq:
description: ACQ/UCP Control
arguments: acq {on | off | toggle}
adaptor_stats:
description: Display iDirect Stack Code adaptor stats
arguments: adaptor_stats
ai_select:
description: evo | evo_min
antenna:
subcommands:
- antenna_point
- antenna_logStatus
atdma:
subcommands:
- atdma_dumpCaptureBET
- atdma_triggerCapture
- atdma_dumpMode
- atdma_subframeLeadinAdjust
beam:
subcommands:
- beam_mode
- beam_switch
- beam_list
- beam_debug
- beam_lock
- beam_txGain
- beam_txOff
block:
description: Prints memory block info
btp:
subcommands:
- btp_stats
- btp_test
- btp_fake
- btp_arrival
- btp_show_count
btpsToIgnore:
description: sets number of btps To Ignore
arguments: n
bwModifiers:
description: bwModifiers
cevatx:
description: ctl|states|bet|sfd|rl|rml|wl
classifier:
description: l2_classifier command
cliformat:
description: set console output format
arguments: <text|json|jsonmin>
commands:
description: Execute multiple commands separated by semicolons
arguments: command1; command2 [...]
consecAcquireNoSlotsLimit:
description: consecAcquireNoSlotsLimit'
arguments: n
controller:
subcommands:
- controller_get
- controller_sleep_factor
- controller_loop_iteration_limit
- controller_rxlo_limit
demandLog:
description: demand debug logging
arguments: "['dump'|nToLog]"
dfoe:
description: dfoe control
dfoerxonly:
description: Rx-Only Dynamic Features and Options exchange
DID:
description: Show modem identification number
dmesg:
description: Logger messages
dp:
subcommands:
- dp_list
- dp_info
- dp_dot
- dp_connect
dump_svn_map:
description: Print Packet Mover's Internal L2 Port Map
enc:
description: Remote encryption control
encs:
description: Remote encryption-session control
events:
description: Display worker statistics
fakeacq:
description: Fake ACQ Control
arguments: fakeacq {on | off | toggle}
flags:
description: Get/set debugging flags
arguments: "[help|set|clear] [flag1 flag2 ...]"
freqErrsDebugDump:
description: dump detected frequency programming mismatches
arguments: startIdx count
gps:
subcommands:
- gps_latLon
- gps_validStatus
- gps_pollInt
help:
description: Show this help
iDirect_commands:
description: Provide a list of all iDirect commands not yet ported to Xerus
inroute:
subcommands:
- inroute_power
- inroute_clear
jittermgmt:
description: Jitter Management
l2:
subcommands:
- l2_classifier
- l2_spoof
l2oam:
description: L2 OAM command
laninfo:
description: View IP address/netmask
ll:
description: Link Layer control
llchop:
subcommands:
- llchop_short_headers
- llchop_packing
log:
description: Control logger
mac_stats:
description: MAC and Link-layer stats
manotarxdelay:
description: manotarxdelay
arguments: manotarxdelay
map:
subcommands:
- map_show
- map_size
- map_sync
- map_newMap
mcastfp_stats:
description: MulticastFastPath stats
mssg:
description: Print msg buff info
nConsecAcqInvitesWithNoSlotToTxIn:
description: nConsecAcqInvitesWithNoSlotToTxIn'
arguments: n
ncr:
subcommands:
- ncr_stats
- ncr_freeze
net:
subcommands:
- net_udp
- net_tcp
nominalInrouteId:
description: shows which carrier is nominal for this remote
arguments: DEVELOPER ONLY
num_subframes:
description: sets number of subframes per frame
arguments: n
oobc:
description: dfoe control
options:
subcommands:
- options_get
- options_find
- options_set
- options_del
- options_publish
- options_read
- options_write
- options_backup
- options_active
ping:
description: ping a host
arguments: ping <address> <size> <num packets> <interval>
pkgrcv_info:
description: Show UDP package receiver info
pm:
subcommands:
- pm_stats
- pm_config
- pm_statsvlan
- pm_history
power_buc:
description: Control BUC power
arguments: "[on|off]"
powerLog:
description: manage power debug log
arguments: "[reset | dump startIdx numEntries]"
powerMetrics:
description: power values used
arguments: "[reset]"
powermgmt:
description: power management information
arguments: TBD
psock0:
subcommands:
- psock0_if_params
- psock0_if_stats
- psock0_dropcount
- psock0_push
- psock0_pull
pwmac:
description: PseudoWire MAC control
quit:
description: Quit
randSeedValue:
description: Display the rand Seed Value
arguments: none
registry:
subcommands:
- registry_list
- registry_item
remotestate:
description: Print the state of the remote
reporter:
subcommands:
- reporter_info
- reporter_event
reset:
description: Reset a device
arguments: <device> <on|off>
rssi_info:
description: get current fast rssi settings
rx:
subcommands:
- rx_iflDC
- rx_tone
- rx_send
- rx_bb
- rx_modcod
- rx_legs
- rx_addr
- rx_snr
- rx_info
- rx_selftest
- rx_demod_reconfig
- rx_demod_info
- rx_modcod_filter
- rx_redirect
- rx_fixedkeys
- rx_freq
- rx_symrate
- rx_fsm
- rx_restart
- rx_only
satcom_info:
description: Satellite Network Info
satif:
description: up | down
service:
subcommands:
- service_start
- service_stop
- service_restart
- service_list
set_led:
description: Control Panel LEDS
arguments: <pwr | stat | rx | tx | net > <off | green | yellow >
setdebuginroute:
description: developer debug to set an 'oob' entry in frequency table
arguments: "index inrouteId freqInHz "
si:
subcommands:
- si_control
- si_table
skew:
description: Show current skew info
sl_dumpflags:
description: Bits to control which SLs are dumped
arguments: sl_dumpflags flags
sleep_now:
description: Sleep
spoof:
description: L2 Spoof Command
spwp:
description: SPWP command
spwpslid: { }
sx3000:
subcommands:
- sx3000_driver
- sx3000_demod
tap:
subcommands:
- tap_dropcount
- tap_push
- tap_pull
thread:
subcommands:
- thread_info
- thread_list
timer:
description: Timer control
tls:
subcommands:
- tls_info
- tls_disconnect
ts_dump:
description: Dump timestamps
arguments: " < '' | ticks >"
tx:
subcommands:
- tx_iflDC
- tx_ifl
- tx_ifl50
- tx_power_init_mob
- tx_info
- tx_reset
- tx_on
- tx_off
- tx_cal
- tx_cross_pol_test
- tx_page
- tx_airdelay
- tx_atdmareset
- tx_power
- tx_refpower
- tx_freqtab
- tx_fsd
- tx_mute
- tx_addr
txq:
subcommands:
- txq_stats
- txq_config
- txq_reset
type_list:
description: List all instances of type
udps_info:
description: Show UDP server info
versions:
description: Print platform version info
wdog:
description: Start the watchdog
arguments: <milliseconds>
[Remote]$
Primary Boot Loader v2.5
SUCCESSFUL DDR INIT
Number of images: 00000003
Software Flags And Offset: 004A00FE FACTORY
Software Flags And Offset: 004A00FD USER1
Software Flags And Offset: 004A00FC USER2
Next package offset: 000A0000
Loading from flash 0x004A0020 length 0x00313CCB
#################################################
Decompressing to RAM: 0E000000 0x006BE294
Host image 0x00000008
address 0x003FFFC0 length 0x006BE280
Next package at: 000A0000
Next package offset: 00000000
Loading from flash 0x000A0020 length 0x0009A96F
#########
Decompressing to RAM: 0E000000 0x000C64F1
Host image 0x00000008
address 0x1D400000 length 0x0004F774
address 0x07FFFFC0 length 0x00075998
address 0x06000000 length 0x000013B9
entry 0x1D400000
Starting CPU 00000000 at 1D400000
U-Boot 2015.10-rc3 (Nov 08 2018 - 10:05:14 -0500), Build: jenkins-pipelines-iqlinux-develop-8
DRAM: DDR driver is not initialized by UBoot
254 MiB
Flash: 128 MiB
In: serial
Out: serial
Err: serial
Net: Board revision is IDU Rev 4
dwmac.bd4e0000, dwmac.bd4e2000
To stop auto boot, press "[[[[": 1
## Booting kernel from Legacy Image at 803fffc0 ...
Image Name: iQOS_18Nov08_101918
Created: 2018-11-08 15:19:18 UTC
Image Type: MIPS Linux Kernel Image (uncompressed)
Data Size: 7070272 Bytes = 6.7 MiB
Load Address: 80400000
Entry Point: 80400000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 07ffffc0 ...
Image Name:
Created: 2018-11-08 15:21:04 UTC
Image Type: MIPS Linux RAMDisk Image (uncompressed)
Data Size: 481624 Bytes = 470.3 KiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 06000000
Booting using the fdt blob at 0x6000000
XIP Kernel Image ... OK
Using Device Tree in place at 06000000, end 060043b8
Linux version 4.5.3 (jenkins@velo-manpack) (gcc version 4.9.2 (Codescape GNU Tools 2015.10-04 for MIPS MTI Linux) ) #1 SMP Thu Nov 8 10:19:03 EST 2018
bootconsole [early0] enabled
CPU0 revision is: 0101a120 (MIPS interAptiv (multi))
MIPS: machine is Satixfy SX3000 Development Board
CMP IOCU detected
Hardware DMA cache coherency disabled
Determined physical RAM map:
memory: 0fe00000 @ 00000000 (usable)
Initial ramdisk at: 0x88000000 (481624 bytes)
Zone ranges:
Normal [mem 0x0000000000000000-0x000000000fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000000000-0x000000000fdfffff]
Initmem setup node 0 [mem 0x0000000000000000-0x000000000fdfffff]
VPE topology {2,2} total 4
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, no aliases, linesize 32 bytes
MIPS secondary cache 512kB, 8-way, linesize 64 bytes.
PERCPU: Embedded 3 pages/cpu @81090000 s8768 r8192 d32192 u49152
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16224
Kernel command line: console=ttyS0,115200n8 init=/bin/sh debug,earlyprintk=serial,ttyS0,115200n8,keep partition=active0 maxcpus=4 finalcpus=4 isolcpus=1-3
PID hash table entries: 1024 (order: -2, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 3, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 2, 65536 bytes)
Writing ErrCtl register=80400000
Readback ErrCtl register=80400000
Cache parity protection enabled
L2 cache parity protection enabled
Memory: 247360K/260096K available (5413K kernel code, 224K rwdata, 1036K rodata, 224K init, 207K bss, 12736K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
NR_IRQS:128
EIC is on
VINT is on
IRQ base, CPU: 0 GIC: 8
clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0x7914c1c15b, max_idle_ns: 440795208269 ns
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
Console: colour dummy device 80x25
Calibrating delay loop... 348.97 BogoMIPS (lpj=1744896)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 4096 (order: 0, 16384 bytes)
Mountpoint-cache hash table entries: 4096 (order: 0, 16384 bytes)
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, no aliases, linesize 32 bytes
MIPS secondary cache 512kB, 8-way, linesize 64 bytes.
CPU1 revision is: 0101a120 (MIPS interAptiv (multi))
Synchronize counters for CPU 1: done.
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, no aliases, linesize 32 bytes
MIPS secondary cache 512kB, 8-way, linesize 64 bytes.
CPU2 revision is: 0101a120 (MIPS interAptiv (multi))
Synchronize counters for CPU 2: done.
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, no aliases, linesize 32 bytes
MIPS secondary cache 512kB, 8-way, linesize 64 bytes.
CPU3 revision is: 0101a120 (MIPS interAptiv (multi))
Synchronize counters for CPU 3: done.
Brought up 4 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
NET: Registered protocol family 16
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
clocksource: Switched to clocksource GIC
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 0, 16384 bytes)
TCP bind hash table entries: 4096 (order: 1, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 512 (order: 0, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 0, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Freeing initrd memory: 464K (88000000 - 88074000)
futex hash table entries: 1024 (order: 1, 32768 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
console [ttyS0] disabled
1d4d09c0.uart: ttyS0 at MMIO 0x1d4d09c0 (irq = 9, base_baud = 16875000) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
bootconsole [early0] disabled
bootconsole [early0] disabled
1d4d0ac0.uart: ttyS1 at MMIO 0x1d4d0ac0 (irq = 10, base_baud = 16875000) is a 16550A
spi_master spi32766: mx66l1g45g (131072 Kbytes)
11 ofpart partitions found on MTD device sx3000_nor
Creating 11 MTD partitions on "sx3000_nor":
0x0000010a0000-0x000008000000 : "partition0"
0x000000020000-0x000000030000 : "boot-dir"
0x000000040000-0x000000050000 : "sf-config"
0x000000060000-0x000000070000 : "id-config"
0x000000030000-0x000000040000 : "u-boot-env"
0x0000000a0000-0x0000002a0000 : "u-boot-initramfs-fdt"
0x0000004a0000-0x0000008a0000 : "kernel-1"
0x0000008a0000-0x000000ca0000 : "kernel-2"
0x000000ca0000-0x0000010a0000 : "kernel-3"
0x000000070000-0x000000080000 : "network-lock"
0x000000000000-0x000000020000 : "primary-booloader"
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
stmmaceth 1d4e0000.dwmac: no reset control found
stmmac - user ID: 0x10, Synopsys ID: 0x37
Ring mode enabled
DMA HW capability register supported
Enhanced/Alternate descriptors
Enabled extended descriptors
RX Checksum Offload Engine supported (type 2)
TX Checksum insertion supported
Enable RX Mitigation via HW Watchdog Timer
force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
stmmaceth 1d4e2000.dwmac: no reset control found
stmmac - user ID: 0x11, Synopsys ID: 0x37
Ring mode enabled
DMA HW capability register supported
Enhanced/Alternate descriptors
Enabled extended descriptors
RX Checksum Offload Engine supported (type 2)
Enable RX Mitigation via HW Watchdog Timer
stmmaceth 1d4e4000.dwmac: no reset control found
stmmac - user ID: 0x11, Synopsys ID: 0x37
Ring mode enabled
DMA HW capability register supported
Enhanced/Alternate descriptors
Enabled extended descriptors
RX Checksum Offload Engine supported (type 2)
TX Checksum insertion supported
Enable RX Mitigation via HW Watchdog Timer
Netfilter messages via NETLINK v0.30.
nfnl_acct: registering with nfnetlink.
nf_conntrack version 0.5.0 (3872 buckets, 15488 max)
ctnetlink v0.93: registering with nfnetlink.
nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
xt_time: kernel timezone is -0000
ip_set: protocol 6
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
8021q: 802.1Q VLAN Support v1.8
Key type dns_resolver registered
page_owner is disabled
Freeing unused kernel memory: 224K (80a88000 - 80ac0000)
ubi0: attaching mtd0
ubi0: scanning is finished
ubi0: attached mtd0 (name "partition0", size 111 MiB)
ubi0: PEB size: 65536 bytes (64 KiB), LEB size: 65408 bytes
ubi0: min./max. I/O unit sizes: 1/256, sub-page size 1
ubi0: VID header offset: 64 (aligned 64), data offset: 128
ubi0: good PEBs: 1782, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 878257521
ubi0: available PEBs: 0, total reserved PEBs: 1782, PEBs reserved for bad PEB handling: 0
ubi0: background thread "ubi_bgt0d" started, PID 951
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 954
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "ROOTFS"
UBIFS (ubi0:0): LEB size: 65408 bytes (63 KiB), min./max. I/O unit sizes: 8 bytes/256 bytes
UBIFS (ubi0:0): FS size: 115641344 bytes (110 MiB, 1768 LEBs), journal size 8650240 bytes (8 MiB, 133 LEBs)
UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 94F5F8E8-701D-49B7-98A0-161557A0B11F, small LPT model
Starting logging: OK
Running exorcist
Demons, begone!
Initializing random number generator... random: dd urandom read with 12 bits of entropy available
done.
Reading raw sector data
MAC addresses found in board configuration
mac1: 8C:57:9B:F1:80:39
mac2: 8C:57:9B:F1:80:3A
Starting PhyConfigurator: Disabling CLKOUT for PHY1 and PHY2
OK
Starting network: net.ipv4.conf.default.accept_local = 1
eth0: device MAC address 8c:57:9b:f1:80:39
eth1: device MAC address 8c:57:9b:f1:80:3a
OK
Loaing kernel modulesNOTE: Module has been allocated: 4194304 bytes of memory
NOTE: atdma_buffers module has been allocated: 65536 bytes of memory
NOTE: Module has been allocated: 4194304 bytes of memory
Starting bigpig: Writing CEVA 0 reset 1
Writing CEVA 1 reset 1
Writing CEVA 2 reset 1
Loading PLFLP_code.bin to 0x1b080000
Loading PFBLP_code.bin to 0x1c880000
Loading GSRLP_code.bin to 0x1d480000
Loading SLWIOLP_ATDMA_code.bin to 0x1d4c0000
Loading CEVARX_code.bin to 0x1c200000
Loading CEVARX_data.bin to 0x1c000000
Loading CEVATX_ATDMA_code.bin to 0x1a200000
Loading CEVATX_ATDMA_data.bin to 0x1a000000
Loading CEVAGSE_code.bin to 0x1aa00000
Loading CEVAGSE_data.bin to 0x1a800000
Loading LDPCTAB_code.bin to 0xfe00000
OK
Starting redis: grep: /sysopt/factory/board_config.json: No such file or directory
serial number:
grep: /sysopt/factory/board_config.json: No such file or directory
modem hardware:
sh: IQDesktop: unknown operand
sh: IQ200Rackmount: unknown operand
sh: IQ200Board: unknown operand
sh: IQLTE: unknown operand
sh: IQAero: unknown operand
model number: 161
/etc/init.d/S50resetFalconOpt: let: line 282: arithmetic syntax error
DID:
bootdev partition: active0
Starting sshd: OK
Starting pcd: Starting Process Control Daemon v1.1.6
Copyright (C) 2010 Texas Instruments Incorporated
Copyright (C) 2011 PCD Project - http://www.rt-embedded.com/pcd
OK
Populating soft partitions: Reading /mnt/factory/etc/idirect/partinfo
Welcome to Tweety (FW version: 4.13.6560)
---- Handling Tx
---- Tx mute at startup
---- disable CLI
---- Handling S2X
--> tx_freq = 1000000
--> tx_symrate = 4000000
Config thread started
JSON Calibration file exists.
Parition active0 is active
Reading /mnt/active0/etc/idirect/partinfo
<log> InitSharedMemory: Starts 0x76172000, Metrics 0x761773C0Take CEVA out of reset...
get_host_to_ceva_tx_q : 0 0 [0x1d47b660 0x1d47b660 0x1d47c740 0x1d47c740] 10e0 0
get_ceva_tx_to_host_q : 0 0 [0x1d47a560 0x1d47a560 0x1d47b640 0x1d47b640] 10e0 0
get_host_to_ceva_gse_q : 0 0 [0x1d47e2e0 0x1d47e2e0 0x1d47f3c0 0x1d47f3c0] 10e0 0
get_ceva_gse_to_host_q : 0 0 [0x1d47d1e0 0x1d47d1e0 0x1d47e2c0 0x1d47e2c0] 10e0 0
get_host_to_ceva_rx_conf_q : 0 0 [0x1d47c760 0x1d47c760 0x1d47c9e0 0x1d47c9e0] 280 0
get_ceva_rx_to_host_conf_q : 0 0 [0x1d47ca00 0x1d47ca00 0x1d47cc80 0x1d47cc80] 280 0
get_host_to_ceva_gse_conf_q : 0 0 [0x1d47cca0 0x1d47cca0 0x1d47cf20 0x1d47cf20] 280 0
get_ceva_gse_to_host_conf_q : 0 0 [0x1d47cf40 0x1d47cf40 0x1d47d1c0 0x1d47d1c0] 280 0
Modem configuration
starting modem with following parameters:
rx symrate: 95000000 sym/s
rx rolloff: 1
rx freq: 1950000
tx symrate: 4000000 sym/s
tx atten: 0
tx freq: 1000000
rx id: 0
s2x: 1
specinv: 1
buc en: 0
buc 10mhz: 0
Modem init: ok
Reading /mnt/active1/etc/idirect/partinfo
Welcome to iDirect iQ Linux
iq-linux login: <log> SfRfTxInit BUC Disable<log> SfRfTxInit Tx Atten internal: 25 [dB], external: 0 [0.5dB]<log> SfRfTxADRF6755Init 50MHz<log> TxFreqLBand 1000000 KHz - LPF [950MHz-1450MHz], Low-High-Boundary 1450000 KHz<log> Set TX Disable & Mute 1 1We're done...bye!
Starting remote processes....
CPU List:
sat0: renamed from sat0.1755
random: nonblocking pool is initialized
device eth0 entered promiscuous mode
Welcome to iDirect iQ Linux
iq-linux login: root
Password:
[root@iq-linux:active0:~] >
[root@iq-linux:active0:~] > mewsh
[Remote]$
[Remote]$ exit
[root@iq-linux:active0:~] >
[root@iq-linux:active0:~] > poweroff
[root@iq-linux:active0:~] >
Stopping pcd: OK
Stopping sshd: OK
grep: /sysopt/factory/board_config.json: No such file or directory
serial number:
grep: /sysopt/factory/board_config.json: No such file or directory
modem hardware:
sh: IQDesktop: unknown operand
sh: IQ200Rackmount: unknown operand
sh: IQ200Board: unknown operand
sh: IQLTE: unknown operand
sh: IQAero: unknown operand
model number: 161
/etc/init.d/S50resetFalconOpt: let: line 282: arithmetic syntax error
DID:
bootdev partition: active0
Stopping redis: OK
Stopping bigpig: OK
Stopping network:
do_page_fault(): sending SIGSEGV to Mobility for invalid read access from 00000000
epc = 00494c9c in
do_page_fault(): sending SIGSEGV to sysmngr for invalid read access from 00000000
epc = 0041a410 in Mobility[400000+d4000]
ra = 0046d9b4 in Mobility[400000+d4000]
sysmngr[400000+30000]
ra = 0041a410 in sysmngr[400000+30000]
RTNETLINK answers: Cannot assign requested address
OK
Stopping PhyConfigurator: OK
Saving random seed... done.
Stopping logging: OK
umount: /run/netns: target is busy
(In some cases useful info about processes that
use the device is found by lsof(8) or fuser(1).)
umount: /run: target is busy
(In some cases useful info about processes that
use the device is found by lsof(8) or fuser(1).)
umount: /: target is busy
(In s
do_page_fault(): sending SIGSEGV to Sabine for invalid write access to 71dadd58ome cases useful
do_page_fault(): sending SIGSEGV to Controller for invalid write access to 71daddac info about procepc = 00813cf8 inesses that
Sabine[400000+598000] use the devra = 0041c440 inice is found by Sabine[400000+598000]lsof(8) or fuser
(1).)
umount: /
tmp: target is bepc = 0044cb44 inusy
(In some cases useful info about processes that
use the device is found by lsof(8) or fuser(1).)
The system is going down NOW!
pcd: Terminating PCD, rebooting system...
All cleaned up!
pcd: Reboot disabled in debug mode, exiting.
All cleaned up!
Sent SIGTERM to all processes
Sabine[400000+598000]
ra = 77a93f30 in libc.so.6[77a60000+168000]
RTNETLINK answers: Invalid argument
Requesting system poweroff
reboot: System halted
Primary Boot Loader v2.5
SUCCESSFUL DDR INIT
Number of images: 00000003
Software Flags And Offset: 004A00FE FACTORY
Software Flags And Offset: 004A00FD USER1
Software Flags And Offset: 004A00FC USER2
Next package offset: 000A0000
Loading from flash 0x004A0020 length 0x00313CCB
#################################################
Decompressing to RAM: 0E000000 0x006BE294
Host image 0x00000008
address 0x003FFFC0 length 0x006BE280
Next package at: 000A0000
Next package offset: 00000000
Loading from flash 0x000A0020 length 0x0009A96F
#########
Decompressing to RAM: 0E000000 0x000C64F1
Host image 0x00000008
address 0x1D400000 length 0x0004F774
address 0x07FFFFC0 length 0x00075998
address 0x06000000 length 0x000013B9
entry 0x1D400000
Starting CPU 00000000 at 1D400000
U-Boot 2015.10-rc3 (Nov 08 2018 - 10:05:14 -0500), Build: jenkins-pipelines-iqlinux-develop-8
DRAM: DDR driver is not initialized by UBoot
254 MiB
Flash: 128 MiB
In: serial
Out: serial
Err: serial
Net: Board revision is IDU Rev 4
dwmac.bd4e0000, dwmac.bd4e2000
To stop auto boot, press "[[[[": 1
## Booting kernel from Legacy Image at 803fffc0 ...
Image Name: iQOS_18Nov08_101918
Created: 2018-11-08 15:19:18 UTC
Image Type: MIPS Linux Kernel Image (uncompressed)
Data Size: 7070272 Bytes = 6.7 MiB
Load Address: 80400000
Entry Point: 80400000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 07ffffc0 ...
Image Name:
Created: 2018-11-08 15:21:04 UTC
Image Type: MIPS Linux RAMDisk Image (uncompressed)
Data Size: 481624 Bytes = 470.3 KiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 06000000
Booting using the fdt blob at 0x6000000
XIP Kernel Image ... OK
Using Device Tree in place at 06000000, end 060043b8
Linux version 4.5.3 (jenkins@velo-manpack) (gcc version 4.9.2 (Codescape GNU Tools 2015.10-04 for MIPS MTI Linux) ) #1 SMP Thu Nov 8 10:19:03 EST 2018
bootconsole [early0] enabled
CPU0 revision is: 0101a120 (MIPS interAptiv (multi))
MIPS: machine is Satixfy SX3000 Development Board
CMP IOCU detected
Hardware DMA cache coherency disabled
Determined physical RAM map:
memory: 0fe00000 @ 00000000 (usable)
Initial ramdisk at: 0x88000000 (481624 bytes)
Zone ranges:
Normal [mem 0x0000000000000000-0x000000000fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000000000-0x000000000fdfffff]
Initmem setup node 0 [mem 0x0000000000000000-0x000000000fdfffff]
VPE topology {2,2} total 4
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, no aliases, linesize 32 bytes
MIPS secondary cache 512kB, 8-way, linesize 64 bytes.
PERCPU: Embedded 3 pages/cpu @81090000 s8768 r8192 d32192 u49152
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16224
Kernel command line: console=ttyS0,115200n8 init=/bin/sh debug,earlyprintk=serial,ttyS0,115200n8,keep partition=active1 maxcpus=4 finalcpus=4 isolcpus=1-3
PID hash table entries: 1024 (order: -2, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 3, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 2, 65536 bytes)
Writing ErrCtl register=80400000
Readback ErrCtl register=80400000
Cache parity protection enabled
L2 cache parity protection enabled
Memory: 247360K/260096K available (5413K kernel code, 224K rwdata, 1036K rodata, 224K init, 207K bss, 12736K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
NR_IRQS:128
EIC is on
VINT is on
IRQ base, CPU: 0 GIC: 8
clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0x7914c1c15b, max_idle_ns: 440795208269 ns
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
Console: colour dummy device 80x25
Calibrating delay loop... 348.97 BogoMIPS (lpj=1744896)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 4096 (order: 0, 16384 bytes)
Mountpoint-cache hash table entries: 4096 (order: 0, 16384 bytes)
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, no aliases, linesize 32 bytes
MIPS secondary cache 512kB, 8-way, linesize 64 bytes.
CPU1 revision is: 0101a120 (MIPS interAptiv (multi))
Synchronize counters for CPU 1: done.
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, no aliases, linesize 32 bytes
MIPS secondary cache 512kB, 8-way, linesize 64 bytes.
CPU2 revision is: 0101a120 (MIPS interAptiv (multi))
Synchronize counters for CPU 2: done.
Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, no aliases, linesize 32 bytes
MIPS secondary cache 512kB, 8-way, linesize 64 bytes.
CPU3 revision is: 0101a120 (MIPS interAptiv (multi))
Synchronize counters for CPU 3: done.
Brought up 4 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
NET: Registered protocol family 16
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
clocksource: Switched to clocksource GIC
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 0, 16384 bytes)
TCP bind hash table entries: 4096 (order: 1, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 512 (order: 0, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 0, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Freeing initrd memory: 464K (88000000 - 88074000)
futex hash table entries: 1024 (order: 1, 32768 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
console [ttyS0] disabled
1d4d09c0.uart: ttyS0 at MMIO 0x1d4d09c0 (irq = 9, base_baud = 16875000) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
bootconsole [early0] disabled
bootconsole [early0] disabled
1d4d0ac0.uart: ttyS1 at MMIO 0x1d4d0ac0 (irq = 10, base_baud = 16875000) is a 16550A
spi_master spi32766: mx66l1g45g (131072 Kbytes)
11 ofpart partitions found on MTD device sx3000_nor
Creating 11 MTD partitions on "sx3000_nor":
0x0000010a0000-0x000008000000 : "partition0"
0x000000020000-0x000000030000 : "boot-dir"
0x000000040000-0x000000050000 : "sf-config"
0x000000060000-0x000000070000 : "id-config"
0x000000030000-0x000000040000 : "u-boot-env"
0x0000000a0000-0x0000002a0000 : "u-boot-initramfs-fdt"
0x0000004a0000-0x0000008a0000 : "kernel-1"
0x0000008a0000-0x000000ca0000 : "kernel-2"
0x000000ca0000-0x0000010a0000 : "kernel-3"
0x000000070000-0x000000080000 : "network-lock"
0x000000000000-0x000000020000 : "primary-booloader"
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
stmmaceth 1d4e0000.dwmac: no reset control found
stmmac - user ID: 0x10, Synopsys ID: 0x37
Ring mode enabled
DMA HW capability register supported
Enhanced/Alternate descriptors
Enabled extended descriptors
RX Checksum Offload Engine supported (type 2)
TX Checksum insertion supported
Enable RX Mitigation via HW Watchdog Timer
force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
stmmaceth 1d4e2000.dwmac: no reset control found
stmmac - user ID: 0x11, Synopsys ID: 0x37
Ring mode enabled
DMA HW capability register supported
Enhanced/Alternate descriptors
Enabled extended descriptors
RX Checksum Offload Engine supported (type 2)
Enable RX Mitigation via HW Watchdog Timer
stmmaceth 1d4e4000.dwmac: no reset control found
stmmac - user ID: 0x11, Synopsys ID: 0x37
Ring mode enabled
DMA HW capability register supported
Enhanced/Alternate descriptors
Enabled extended descriptors
RX Checksum Offload Engine supported (type 2)
TX Checksum insertion supported
Enable RX Mitigation via HW Watchdog Timer
Netfilter messages via NETLINK v0.30.
nfnl_acct: registering with nfnetlink.
nf_conntrack version 0.5.0 (3872 buckets, 15488 max)
ctnetlink v0.93: registering with nfnetlink.
nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
xt_time: kernel timezone is -0000
ip_set: protocol 6
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
8021q: 802.1Q VLAN Support v1.8
Key type dns_resolver registered
page_owner is disabled
Freeing unused kernel memory: 224K (80a88000 - 80ac0000)
ubi0: attaching mtd0
ubi0: scanning is finished
ubi0: attached mtd0 (name "partition0", size 111 MiB)
ubi0: PEB size: 65536 bytes (64 KiB), LEB size: 65408 bytes
ubi0: min./max. I/O unit sizes: 1/256, sub-page size 1
ubi0: VID header offset: 64 (aligned 64), data offset: 128
ubi0: good PEBs: 1782, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 878257521
ubi0: available PEBs: 0, total reserved PEBs: 1782, PEBs reserved for bad PEB handling: 0
ubi0: background thread "ubi_bgt0d" started, PID 952
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 955
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "ROOTFS"
UBIFS (ubi0:0): LEB size: 65408 bytes (63 KiB), min./max. I/O unit sizes: 8 bytes/256 bytes
UBIFS (ubi0:0): FS size: 115641344 bytes (110 MiB, 1768 LEBs), journal size 8650240 bytes (8 MiB, 133 LEBs)
UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 94F5F8E8-701D-49B7-98A0-161557A0B11F, small LPT model
Starting logging: OK
Running exorcist
Demons, begone!
Initializing random number generator... random: dd urandom read with 12 bits of entropy available
done.
Reading raw sector data
MAC addresses found in board configuration
mac1: 8C:57:9B:FA:9E:F7
mac2: 8C:57:9B:FA:9E:F8
Starting PhyConfigurator: Disabling CLKOUT for PHY1 and PHY2
[OK]
Starting network: net.ipv4.conf.default.accept_local = 1
OK
Cannot get device feature names: Device or resource busy
net.core.optmem_max = 32768
net.ipv4.igmp_max_memberships = 1024
net.ipv4.ip_forward = 1
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_ecn = 0
net.ipv4.conf.eth0.rp_filter = 1
net.ipv4.neigh.default.gc_thresh1 = 1024
net.ipv4.neigh.default.gc_thresh2 = 4096
net.ipv4.neigh.default.gc_thresh3 = 16384
net.netfilter.nf_conntrack_max = 20000
Setting the system date
Fri Mar 29 20:58:59 UTC 2019
Starting sshd: OK
Starting watchdog timer [OK]
Starting redis-server [OK]
Starting pcd [OK]
Populating soft partitions: Reading /mnt/factory/etc/idirect/partinfo
NOTE: Module has been allocated: 4194304 bytes of memory
NOTE: atdma_buffers module has been allocated: 65536 bytes of memory
Reading /mnt/active0/etc/idirect/partinfo
NOTE: Module has been allocated: 4194304 bytes of memory
eth0: device MAC address 8c:57:9b:fa:9e:f7
eth1: device MAC address 8c:57:9b:fa:9e:f8
Parition active1 is active
Reading /mnt/active1/etc/idirect/partinfo
Welcome to iDirect iQ Linux
iq-linux login: root
Password:
[root@iq-linux:active1:~] > mewsh
[IQBoard]$
[IQBoard]$ exit
[root@iq-linux:active1:~] > poweroff
[root@iq-linux:active1:~] >
Stopping sysmngr [STOPPED]
Stopping pcd [KILLED]
Stopping redis-server [STOPPED]
Stopping evo_mobility [NOT RUNNING]
Stopping velo_mobility [STOPPED]
Stopping antenna_ctrl [STOPPED]
Stopping paddymanager [STOPPED]
Stopping paddy [NOT RUNNING]
Stopping gargoyle [STOPPED]
Stopping dodo [NOT RUNNING]
Stopping seagull [NOT RUNNING]
Stopping sabine [STOPPED]
Stopping griffin [STOPPED]
Stopping fancontrol [NOT RUNNING]
Stopping lcdmanager [NOT RUNNING]
Unloading drivers [OK]
Stopping watchdog timer [STOPPED]
Stopping sshd: OK
Saving the system date to /common/timestamp
Stopping network: OK
Saving random seed... done.
Stopping logging: OK
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops
umount: /tmp: target is busy
(In some cases useful info about processes that
use the device is found by lsof(8) or fuser(1).)
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to
reboot: System halted
========= End