zoukankan      html  css  js  c++  java
  • 图论--2-SAT--POJ 3905 Perfect Election

    Perfect Election
    Time Limit: 5000MS         Memory Limit: 65536K
    Total Submissions: 964         Accepted: 431
    Description

    In a country (my memory fails to say which), the candidates {1, 2 ..., N} are running in the parliamentary election. An opinion poll asks the question "For any two candidates of your own choice, which election result would make you happy?". The accepted answers are shown in the table below, where the candidates i and j are not necessarily different, i.e. it may happen that i=j. There are M poll answers, some of which may be similar or identical. The problem is to decide whether there can be an election outcome (It may happen that all candidates fail to be elected, or all are elected, or only a part of them are elected. All these are acceptable election outcomes.) that conforms to all M answers. We say that such an election outcome is perfect. The result of the problem is 1 if a perfect election outcome does exist and 0 otherwise.
    Input

    Each data set corresponds to an instance of the problem and starts with two integral numbers: 1≤N≤1000 and 1≤M≤1000000. The data set continues with M pairs ±i ±j of signed numbers, 1≤i,j≤N. Each pair encodes a poll answer as follows: 

    Accepted answers to the poll question    Encoding
    I would be happy if at least one from i and j is elected.    +i +j
    I would be happy if at least one from i and j is not elected.    -i -j
    I would be happy if i is elected or j is not elected or both events happen.    +i -j
    I would be happy if i is not elected or j is elected or both events happen.    -i +j


    The input data are separated by white spaces, terminate with an end of file, and are correct.
    Output

    For each data set the program prints the result of the encoded election problem. The result, 1 or 0, is printed on the standard output from the beginning of a line. There must be no empty lines on output.
    Sample Input

    3 3  +1 +2  -1 +2  -1 -3 
    2 3  -1 +2  -1 -2  +1 -2 
    2 4  -1 +2  -1 -2  +1 -2  +1 +2 
    2 8  +1 +2  +2 +1  +1 -2  +1 -2  -2 +1  -1 +1  -2 -2  +1 -1
    Sample Output

    1
    1
    0
    1
    Hint

    For the first data set the result of the problem is 1; there are several perfect election outcomes, e.g. 1 is not elected, 2 is elected, 3 is not elected. The result for the second data set is justified by the perfect election outcome: 1 is not elected, 2 is not elected. The result for the third data set is 0. According to the answers -1 +2 and -1 -2 the candidate 1 must not be elected, whereas the answers +1 -2 and +1 +2 say that candidate 1 must be elected. There is no perfect election outcome. For the fourth data set notice that there are similar or identical poll answers and that some answers mention a single candidate. The result is 1.

    题意:有N个候选人,给出M个限制条件。这些条件可以分成4类

    1,+i +j 表示 i 和 j 至少选一个;

    2,-i  -j 表示 i 和 j 最多选一个;

    3,+i -j 表示 选i 和 不选j 最少成立一个 ;

    4,-i +j 表示 不选i 和 选j 最少成立一个;      

    问你有没有一种方案满足M个条件。

    建图: 我用Ai表示i 被选上,!Ai表示i没有被选上。

    对于1则有  非Ai -> Aj 和 非Aj -> Ai

    对于2则有  Ai -> 非Aj 和 Aj -> 非Ai

    对于3则有  Aj -> Ai 和 非Ai -> 非Aj

    对于4则有  非Aj -> 非Ai 和 Ai -> Aj

    记住三个符号六种基本建图方式,剩下的都可以修改:比如上面的4代表Ai and 非Aj=1,我们就是非Aj建图加上个Ai and Aj建图,自己画个图想想是不是? 地址

     AC代码:

    #include <cstdio>
    #include <cstring>
    #include <queue>
    #include <stack>
    #include <vector>
    #include <algorithm>
    #define MAXN 2000+10
    #define INF 1000000
    #define eps 1e-5
    using namespace std;
    vector<int> G[MAXN];
    int low[MAXN], dfn[MAXN];
    int dfs_clock;
    int sccno[MAXN], scc_cnt;
    stack<int> S;
    bool Instack[MAXN];
    int N, M;
    void init()
    {
        for(int i = 1; i <= 2*N; i++) G[i].clear();
    }
    void getMap()
    {
        int i, j;
        char op1, op2;
        while(M--)
        { 
            scanf("  %c%d %c%d", &op1, &i, &op2, &j);
            if(op1 == '+' && op2 == '+')
            {
                G[i + N].push_back(j);
                G[j + N].push_back(i);
            } 
            else if(op1 == '-' && op2 == '-')
            {
                G[i].push_back(j + N);
                G[j].push_back(i + N);
            }
            else if(op1 == '+' && op2 == '-')
            {
                G[i + N].push_back(j + N);//i若没有被选上 j一定没有被选上 
                G[j].push_back(i);//j被选上 i一定被选上 
            }
            else
            {
                G[i].push_back(j);//i被选上 j一定被选上 
                G[j + N].push_back(i + N);//j没有被选上 i一定没有被选上
            }
        }
    }
    void tarjan(int u, int fa)
    {
        int v;
        low[u] = dfn[u] = ++dfs_clock;
        S.push(u);
        Instack[u] = true;
        for(int i = 0; i < G[u].size(); i++)
        {
            v = G[u][i];
            if(!dfn[v])
            {
                tarjan(v, u);
                low[u] = min(low[u], low[v]);
            }
            else if(Instack[v])
            low[u] = min(low[u], dfn[v]);
        }
        if(low[u] == dfn[u])
        {
            scc_cnt++;
            for(;;)
            {
                v = S.top(); S.pop();
                sccno[v] = scc_cnt;
                Instack[v] = false;
                if(v == u) break;
            }
        }
    }
    void find_cut(int l, int r)
    {
        memset(low, 0, sizeof(low));
        memset(dfn, 0, sizeof(dfn));
        memset(sccno, 0, sizeof(sccno));
        memset(Instack, false, sizeof(Instack));
        dfs_clock = scc_cnt = 0;
        for(int i = l; i <= r; i++)
        if(!dfn[i]) tarjan(i, -1);
    }
    void solve()
    {
        for(int i = 1; i <= N; i++)
        {
            if(sccno[i] == sccno[i+N])
            {
                printf("0
    ");
                return ;
            }
        }
        printf("1
    ");
    }
    int main()
    {
        while(scanf("%d%d", &N, &M) != EOF)
        {
            init();
            getMap();
            find_cut(1, 2*N);
            solve();
        }
        return 0;
    }
  • 相关阅读:
    【Git】rebase 用法小结(转)
    修饰符访问权限。
    throws与throw关键字。
    多线程,同步代码块。
    多线程,设置线程的优先级。
    多线程,加入线程。
    多线程,守护线程。
    多线程,休眠线程。
    多线程,获取当前线程的对象。
    多线程获取名字和设置名字。
  • 原文地址:https://www.cnblogs.com/lunatic-talent/p/12798596.html
Copyright © 2011-2022 走看看