zoukankan      html  css  js  c++  java
  • Packet Tracer 5.0实验(一) 交换机的基本配置与管理

    一、实验目标

     掌握交换机基本信息的配置与管理

    二、技术原理

     交换机的管理方式基本分为两种:带内管理和带外管理。

    •  通过交换机的Console端口管理交换机属于带外管理:这种管理方式不占用交换机的网络端口,第一次配置交换机必须利用Console端口进行配置。
    •  通过远程Telnet、拨号等方式属于带内管理。

    三、交换机的命令行操作模式

     主要包括:

     用户模式           Switch>

     特权模式           Switch#

     全局配置模式      Switch(config)#

     端口模式           Switch(config-if)#

    四、实验步骤

     1、实验拓扑

     2、交换机基本配置命令

      a. 进入特权模式

          Switch>enable                                                  //en=enable

          Switch#

      b. 进入全局配置模式

          Switch#configure terminal                                  //conf t=configure terminal

          Enter configuration commands, one per line. End with CNTL/Z.

      c. 进入交换机端口视图模式

          Switch(config)#interface fastEthernet 0/1            //int f0/1=interface fastEthernet 0/1

          Switch(config-if)#
      d. 配置交换机端口速度

          Switch(config-if)#speed ?

    10    Force 10 Mbps operation
    100   Force 100 Mbps operation
    auto  Enable AUTO speed configuration

          Switch(config-if)#speed 100

      e. 配置交换机端口双工模式

          Switch(config-if)#duplex ?                              

    auto Enable AUTO duplex configuration
    full Force full duplex operation
    half Force half-duplex operation
          Switch(config-if)#duplex full

      f. 退回到上一级模式

          Switch(config-if)#exit

          Switch(config)#

      g. 直接退回到特权模式

          Switch(config-if)#end

          Switch#

          %SYS-5-CONFIG_I: Configured from console by console

          Switch#

      h. 查看交换机版本信息

          Switch#show version    

    Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-2005 by Cisco Systems, Inc.
    Compiled Wed 12-Oct-05 22:05 by pt_team
    
    ROM: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)FX, RELEASE SOFTWARE (fc4)
     
    System returned to ROM by power-on
    
    Cisco WS-C2960-24TT (RC32300) processor (revision C0) with 21039K bytes of memory.
     
    
    24 FastEthernet/IEEE 802.3 interface(s)
    2 Gigabit Ethernet/IEEE 802.3 interface(s)
     
    63488K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address       : 0040.0B69.8831
    Motherboard assembly number     : 73-9832-06
    Power supply part number        : 341-0097-02
    Motherboard serial number       : FOC103248MJ
    Power supply serial number      : DCA102133JA
    Model revision number           : B0
    Motherboard revision number     : C0
    Model number                    : WS-C2960-24TT
    System serial number            : FOC1033Z1EY
      --More--
    ...
    Configuration register is 0xF

      i. 查看当前生效的配置信息

         Switch#show running-config    

    Building configuration...
    
    Current configuration : 1033 bytes
    !
    version 12.2
    no service timestamps log datetime msec
    no service timestamps debug datetime msec
    no service password-encryption
    !
    hostname Switch
    !
    !
    !
    interface FastEthernet0/1
     duplex full
     speed 100
    !
    interface FastEthernet0/2
    !
    interface FastEthernet0/3
    !
    interface FastEthernet0/4
    !
    interface FastEthernet0/5
     --More--
    ...
    !
    !
    end

      j. 帮助信息

         ① Switch#?

    Exec commands:
      <1-99>      Session number to resume
      clear       Reset functions
      clock       Manage the system clock
      configure   Enter configuration mode
      connect     Open a terminal connection
      copy        Copy from one file to another
      debug       Debugging functions (see also 'undebug')
      delete      Delete a file
      dir         List files on a filesystem
      disable     Turn off privileged commands
      disconnect  Disconnect an existing network connection
      enable      Turn on privileged commands
      erase       Erase a filesystem
      exit        Exit from the EXEC
      logout      Exit from the EXEC
      more        Display the contents of a file
      no          Disable debugging informations
      ping        Send echo messages
      reload      Halt and perform a cold restart
      resume      Resume an active network connection
      setup       Run the SETUP command facility
     --More-- 

         ② Switch#co?

    configure  connect  copy  

         ③ Switch#copy ?

      flash:          Copy from flash: file system
      ftp:            Copy from ftp: file system
      running-config  Copy from current system configuration
      startup-config  Copy from startup configuration
      tftp:           Copy from tftp: file system



    Packet Tracer 5.0系列实验根据5ijsj实验整理,更多资料请访问 http://hi.baidu.com/new/5ijsj

  • 相关阅读:
    第二次结对编程总结
    结对编程作业博客
    现状、经验和计划
    个人总结
    6月中旬开发心得
    读《软件开发沉思录》
    团队进度汇报
    个人课程总结
    Beta阶段总结
    冲刺第十天 1.11 FRI
  • 原文地址:https://www.cnblogs.com/mchina/p/2587174.html
Copyright © 2011-2022 走看看