zoukankan      html  css  js  c++  java
  • D

    Description

    Farmer John's cousin, Farmer Ron, who lives in the mountains of Colorado, has recently taught his cows to ski. Unfortunately, his cows are somewhat timid and are afraid to ski among crowds of people at the local resorts, so FR has decided to construct his own private ski area behind his farm. 

    FR's ski area is a rectangle of width W and length L of 'land squares' (1 <= W <= 500; 1 <= L <= 500). Each land square is an integral height H above sea level (0 <= H <= 9,999). Cows can ski horizontally and vertically between any two adjacent land squares, but never diagonally. Cows can ski from a higher square to a lower square but not the other way and they can ski either direction between two adjacent squares of the same height. 

    FR wants to build his ski area so that his cows can travel between any two squares by a combination of skiing (as described above) and ski lifts. A ski lift can be built between any two squares of the ski area, regardless of height. Ski lifts are bidirectional. Ski lifts can cross over each other since they can be built at varying heights above the ground, and multiple ski lifts can begin or end at the same square. Since ski lifts are expensive to build, FR wants to minimize the number of ski lifts he has to build to allow his cows to travel between all squares of his ski area. 

    Find the minimum number of ski lifts required to ensure the cows can travel from any square to any other square via a combination of skiing and lifts.

    Input

    * Line 1: Two space-separated integers: W and L 

    * Lines 2..L+1: L lines, each with W space-separated integers corresponding to the height of each square of land.

    Output

    * Line 1: A single integer equal to the minimal number of ski lifts FR needs to build to ensure that his cows can travel from any square to any other square via a combination of skiing and ski lifts

    Sample Input

    9 3
    1 1 1 2 2 2 1 1 1
    1 2 1 2 3 2 1 2 1
    1 1 1 2 2 2 1 1 1

    Sample Output

    3

    Hint

    This problem has huge input data,use scanf() instead of cin to read data to avoid time limit exceed. 

    OUTPUT DETAILS: 

    FR builds the three lifts. Using (1, 1) as the lower-left corner, 
    the lifts are (3, 1) <-> (8, 2), (7, 3) <-> (5, 2), and (1, 3) <-> 
    (2, 2). All locations are now connected. For example, a cow wishing 
    to travel from (9, 1) to (2, 2) would ski (9, 1) -> (8, 1) -> (7, 
    1) -> (7, 2) -> (7, 3), take the lift from (7, 3) -> (5, 2), ski 
    (5, 2) -> (4, 2) -> (3, 2) -> (3, 3) -> (2, 3) -> (1, 3), and then 
    take the lift from (1, 3) - > (2, 2). There is no solution using 

    fewer than three lifts.

    1. #include<stdio.h>  
    2. #include<string.h>  
    3. #include<stack>  
    4. #define INF 1000010  
    5. #define P 261010  
    6. using namespace std;  
    7. stack<int>S;  
    8. int a[550][550],map[P][10],low[P],dfn[P];  
    9. int instack[P];  
    10. int bnt,be[P],n,m;  
    11. int index,in[P],out[P];  
    12. void build(){  
    13.     for(int i=1;i<=n;i++)  
    14.     for(int j=1;j<=m;j++){  
    15.         if(a[i][j]>=a[i-1][j])map[j+m*i-m][++map[j+m*i-m][0]] = j+(i-2)*m;  
    16.         if(a[i][j]>=a[i+1][j])map[j+m*i-m][++map[j+m*i-m][0]] = j+i*m;  
    17.         if(a[i][j]>=a[i][j+1])map[j+m*i-m][++map[j+m*i-m][0]] = j+(i-1)*m+1;  
    18.         if(a[i][j]>=a[i][j-1])map[j+m*i-m][++map[j+m*i-m][0]] = j+(i-1)*m-1;  
    19.     }   
    20. }  
    21. void tarjan(int i){  
    22.     dfn[i] = low[i] = ++index;  
    23.     S.push(i);  
    24.     instack[i] = 1;  
    25.     for(int j = 1;j<=map[i][0];j++){  
    26.         int k = map[i][j];  
    27.         if(!dfn[k]){  
    28.             tarjan(k);  
    29.             low[i] = min(low[i],low[k]);  
    30.         }  
    31.         else if(instack[k]){  
    32.         low[i] = min(low[i],dfn[k]);  
    33.         }  
    34.     }  
    35.     if(dfn[i]==low[i]){  
    36.         bnt++;  
    37.         int kk;  
    38.         do{  
    39.             kk = S.top();  
    40.             S.pop();  
    41.             instack[kk] = 0;  
    42.             be[kk] = bnt;  
    43.         }while(i!=kk);  
    44.     }     
    45. }  
    46. int main(){  
    47.     while(~scanf("%d%d",&m,&n)){  
    48.         int ans,ans1;  
    49.         memset(dfn,0,sizeof(dfn));  
    50.         memset(in,0,sizeof(in));  
    51.         memset(out,0,sizeof(out));  
    52.         memset(instack,0,sizeof(instack));  
    53.         bnt = ans = ans1 = index = 0;  
    54.         for(int i=0;i<=n+1;i++)a[i][0] = a[i][m+1] = INF;  
    55.         for(int j=0;j<=m+1;j++)a[0][j] = a[n+1][j] = INF;  
    56.         for(int i=1;i<=n;i++){  
    57.             for(int j=1;j<=m;j++){  
    58.                 scanf("%d",&a[i][j]);  
    59.                 map[j+(i-1)*m][0] = 0;  
    60.             }  
    61.         }  
    62.         build();  
    63.         for(int i=1;i<=n*m;i++)  
    64.         if(!dfn[i])  
    65.         tarjan(i);   
    66.         for(int i=1;i<=n*m;i++){  
    67.             for(int j =1;j<=map[i][0];j++)  
    68.             if(be[i]!=be[map[i][j]]){  
    69.             out[be[i]]++;  
    70.             in[be[map[i][j]]]++;  
    71.             }  
    72.         }  
    73.         for(int i=1;i<=bnt;i++){  
    74.                 if(out[i]==0)ans++;  
    75.                 if(in[i]==0)ans1++;  
    76.         }  
    77.         if(bnt==1)printf("0 ");  
    78.         else printf("%d ",max(ans,ans1));  
    79.           
    80.     }  
    81. }  
    1. 在POJ能过,在杭电就过不了,是什么原因啊,。。。。。。??!坑爹啊  
  • 相关阅读:
    Appium学习实践(二)Python简单脚本以及元素的属性设置
    Appium学习实践(三)测试用例脚本以及测试报告输出
    Appium学习实践(一)简易运行Appium
    Appium学习实践(四)结构优化
    js中对小数取整的函数
    C#基础 面试中常出现的问题
    repeater中的删除按钮实现
    js对fck编辑器取值 赋值
    jQuery对select操作
    进制转换(二进制 八进制 十进制 十六进制)
  • 原文地址:https://www.cnblogs.com/mengfanrong/p/4100266.html
Copyright © 2011-2022 走看看