zoukankan      html  css  js  c++  java
  • POJ1251 Jungle Roads 【最小生成树Prim】

    Jungle Roads
    Time Limit: 1000MS   Memory Limit: 10000K
    Total Submissions: 19536   Accepted: 8970

    Description


    The Head Elder of the tropical island of Lagrishan has a problem. A burst of foreign aid money was spent on extra roads between villages some years ago. But the jungle overtakes roads relentlessly, so the large road network is too expensive to maintain. The Council of Elders must choose to stop maintaining some roads. The map above on the left shows all the roads in use now and the cost in aacms per month to maintain them. Of course there needs to be some way to get between all the villages on maintained roads, even if the route is not as short as before. The Chief Elder would like to tell the Council of Elders what would be the smallest amount they could spend in aacms per month to maintain roads that would connect all the villages. The villages are labeled A through I in the maps above. The map on the right shows the roads that could be maintained most cheaply, for 216 aacms per month. Your task is to write a program that will solve such problems. 

    Input

    The input consists of one to 100 data sets, followed by a final line containing only 0. Each data set starts with a line containing only a number n, which is the number of villages, 1 < n < 27, and the villages are labeled with the first n letters of the alphabet, capitalized. Each data set is completed with n-1 lines that start with village labels in alphabetical order. There is no line for the last village. Each line for a village starts with the village label followed by a number, k, of roads from this village to villages with labels later in the alphabet. If k is greater than 0, the line continues with data for each of the k roads. The data for each road is the village label for the other end of the road followed by the monthly maintenance cost in aacms for the road. Maintenance costs will be positive integers less than 100. All data fields in the row are separated by single blanks. The road network will always allow travel between all the villages. The network will never have more than 75 roads. No village will have more than 15 roads going to other villages (before or after in the alphabet). In the sample input below, the first data set goes with the map above. 

    Output

    The output is one integer per line for each data set: the minimum cost in aacms per month to maintain a road system that connect all the villages. Caution: A brute force solution that examines every possible set of roads will not finish within the one minute time limit. 

    Sample Input

    9
    A 2 B 12 I 25
    B 3 C 10 H 40 I 8
    C 2 D 18 G 55
    D 1 E 44
    E 2 F 60 G 38
    F 0
    G 1 H 35
    H 1 I 35
    3
    A 2 B 10 C 40
    B 1 C 20
    0

    Sample Output

    216
    30

    Source

    水题。

    #include <stdio.h>
    #include <string.h>
    
    #define maxn 30
    #define maxm 160
    #define inf 0x3f3f3f3f
    
    int n, head[maxn], id, dist[maxn];
    struct Node {
    	int v, dis, next;
    } E[maxm];
    bool vis[maxn];
    
    void addEdge(int u, int v, int dis) {
    	E[id].v = v; E[id].dis = dis;
    	E[id].next = head[u]; head[u] = id++;
    }
    
    void getMap() {
    	int u, v, k, dis, i; id = 0;
    	char ch[2];
    	memset(head, -1, sizeof(head));
    	for(i = 1; i < n; ++i) {
    		scanf("%s%d", ch, &k);
    		u = ch[0] - 'A';
    		while(k--) {
    			scanf("%s%d", ch, &dis);
    			v = ch[0] - 'A';
    			addEdge(u, v, dis);
    			addEdge(v, u, dis);
    		}
    	}
    }
    
    int getNext() {
    	int i, pos = -1, dis = inf;
    	for(i = 0; i < n; ++i)
    		if(!vis[i] && dist[i] < dis) {
    			dis = dist[i]; pos = i;
    		}
    	return pos;
    }
    
    int Prim() {
    	int sum = 0, i, u, v;
    	for(i = 0; i < n; ++i) {
    		vis[i] = 0; dist[i] = inf;
    	}
    	u = 0; dist[u] = 0;
    	while(u != -1) {
    		vis[u] = 1; sum += dist[u];
    		for(i = head[u]; i != -1; i = E[i].next)
    			if(dist[v = E[i].v] > E[i].dis)
    				dist[v] = E[i].dis;
    		u = getNext();
    	}
    	return sum;
    }
    
    void solve() {
    	printf("%d
    ", Prim());
    }
    
    int main() {
    	// freopen("stdin.txt", "r", stdin);
    	while(scanf("%d", &n), n) {
    		getMap();
    		solve();
    	}
    	return 0;
    }


  • 相关阅读:
    Redis为什么使用单进程单线程方式也这么快
    数据库表设计五大范式所解决的问题
    数据库范式那些事
    线上Java程序导致服务器CPU占用率过高的问题排除过程
    对分布式事务及两阶段提交、三阶段提交的理解
    About the diffrence of wait timed_wait and block in java
    Linux io Model
    阻塞与非阻塞,同步与异步
    深入理解JAVA I/O系列六:Linux中的IO模型(转载的文章非常值得学习)
    真正的Maven经常使用命令
  • 原文地址:https://www.cnblogs.com/mengfanrong/p/5092593.html
Copyright © 2011-2022 走看看