zoukankan      html  css  js  c++  java
  • vps安全设置

    适合新手及才接触VPS的朋友们看一下。主要是关于VPS安全方面相关内容的

    禁止ROOT登陆 保证安全性。

    使用DDoS deflate简单防攻击。

    iftop Linux流量监控工具;

    每日自己主动备份VPS到FTP空间。

    升级LNMP的NGINX到最新版。

    一、改动SSHport

    vi /etc/ssh/sshd_config

    找到当中的#Port 22(第13行),去掉#,改动成Port 3333

    使用例如以下命令,重新启动SSH服务。注:以后用新port登陆。

    service sshd restart

    二、禁止ROOT登陆

    先加入一个新帐号vpsmm。能够自己定义:

    useradd vpsmm

    给vpsmm帐号设置password:

    passwd vpsmm

    仍旧是改动/etc/ssh/sshd_config文件,第39行:#PermitRootLogin yes,去掉前面的#,并把yes改成no。然后,重新启动SSH服务。

    以后,先使用vpsmm登陆。再su root就可以得到ROOT管理权限。

    login as: vpsmm
    vpsmm@ip password:*****
    Last login: Tue Nov 22 14:39:58 2010 from 1.2.3.4
    su root
    Password:*********** #注这里输入ROOT的password

    三、使用DDos deflate简单防落CC和DDOS攻击

    使用netstat命令,查看VPS当前链接确认是否受到攻击:

    netstat -ntu | awk '{print $5}' | cut -d: -f1 | sort | uniq -c | sort -n

    IP前面的数字,即为连接数。假设说正常站点,几十到一百都属于正常连接,但出现几百,或上千的就能够垦定这个IP与你的VPS之间可能存在可疑连接现象。

    能够使用iptables直接BAN了这个IP的永久訪问:

    iptables -A INPUT -s 12.34.56.78 -j DROP

    今天介绍给大家一种方法,是使用软件DDos deflate来自己主动检測并直接BAN掉的方法,首先我们要确认一下iptables服务状态。默认CENTOS就安装的,不看也行。

    service iptables status

    安装DDos deflat:

    wget http://www.inetbase.com/scripts/ddos/install.sh
    chmod +x install.sh
    ./install.sh

    安装后须要改动/usr/local/ddos/ddos.conf,主要是APF_BAN=1要设置成0,由于要使用iptables来封某些可疑连接,注意EMAIL_TO=“root”,这样BAN哪个IP会有邮件提示:

    ##### Paths of the script and other files
    PROGDIR="/usr/local/ddos"
    PROG="/usr/local/ddos/ddos.sh"
    IGNORE_IP_LIST="/usr/local/ddos/ignore.ip.list"  //IP地址白名单
    CRON="/etc/cron.d/ddos.cron"    //定时运行程序
    APF="/etc/apf/apf"
    IPT="/sbin/iptables"
    ##### frequency in minutes for running the script
    ##### Caution: Every time this setting is changed, run the script with --cron
    #####          option so that the new frequency takes effect
    FREQ=1   //检查时间间隔,默认1分钟
    ##### How many connections define a bad IP? Indicate that below.
    NO_OF_CONNECTIONS=150     //最大连接数,超过这个数IP就会被屏蔽。一般默认就可以
    ##### APF_BAN=1 (Make sure your APF version is atleast 0.96)
    ##### APF_BAN=0 (Uses iptables for banning ips instead of APF)
    APF_BAN=1        //使用APF还是iptables。推荐使用iptables,将APF_BAN的值改为0就可以。
    ##### KILL=0 (Bad IPs are'nt banned, good for interactive execution of script)
    ##### KILL=1 (Recommended setting)
    KILL=1   //是否屏蔽IP,默认就可以
    ##### An email is sent to the following address when an IP is banned.
    ##### Blank would suppress sending of mails
    EMAIL_TO="root"   //当IP被屏蔽时给指定邮箱发送邮件,推荐使用,换成自己的邮箱就可以
    ##### Number of seconds the banned ip should remain in blacklist.
    BAN_PERIOD=600    //禁用IP时间,默认600秒。可依据情况调整

    四、使用iftop查看具体网络状况

    安装IFTOP软件:

    yum -y install flex byacc  libpcap ncurses ncurses-devel libpcap-devel
    wget http://www.ex-parrot.com/pdw/iftop/download/iftop-0.17.tar.gz
    tar zxvf iftop-0.17.tar.gz
    cd iftop-0.17
    ./configure
    make && make install

    安装后,使用iftop执行,查看网络情况。TX,发送流量。RX,接收流量;TOTAL,总流量;Cumm,执行iftop期间流量。peak。流量峰值;rates,分别代表2秒、10秒、40秒的平均流量。

    快捷键:h帮助,n切换显示IP主机名,s是否显示本机信息,d是否显示远端信息,N切换port服务名称,b切换是否时数流量图形条。

    五、每日备份你的VPS上传到FTP空间

    六、升级LNMP中的NGINX到最新版

    如今最新版是0.8.53,假设以后出新版。仅仅要更新版本就能够,在SSH里执行:

    wget http://www.nginx.org/download/nginx-0.8.53.tar.gz
    tar zxvf nginx-0.8.53.tar.gz
    cd nginx-0.8.53
    ./configure --user=www --group=www --prefix=/usr/local/nginx --with-http_stub_status_module --with-http_ssl_module  --with-http_sub_module
    make
    mv /usr/local/nginx/sbin/nginx /usr/local/nginx/sbin/nginx.old
    cd objs/
    cp nginx /usr/local/nginx/sbin/
    /usr/local/nginx/sbin/nginx -t
    kill -USR2 `cat /usr/local/nginx/logs/nginx.pid`
    kill -QUIT `cat /usr/local/nginx/logs/nginx.pid.oldbin`
    /usr/local/nginx/sbin/nginx -v
    cd ..
    cd ..
    rm -rf nginx-0.8.53
    rm -rf nginx-0.8.53.tar.gz

    七、经常使用netstat命令:

    1.查看全部80port的连接数

    netstat -nat|grep -i "80"|wc -l

    2.对连接的IP按连接数量进行排序

    netstat -ntu | awk '{print $5}' | cut -d: -f1 | sort | uniq -c | sort -n

    3.查看TCP连接状态

    netstat -nat |awk '{print $6}'|sort|uniq -c|sort -rn
    netstat -n | awk '/^tcp/ {++S[$NF]};END {for(a in S) print a, S[a]}'
    netstat -n | awk '/^tcp/ {++state[$NF]}; END {for(key in state) print key," ",state[key]}'
    netstat -n | awk '/^tcp/ {++arr[$NF]};END {for(k in arr) print k," ",arr[k]}'
    netstat -n |awk '/^tcp/ {print $NF}'|sort|uniq -c|sort -rn
    netstat -ant | awk '{print $NF}' | grep -v '[a-z]' | sort | uniq -c

    4.查看80port连接数最多的20个IP

    netstat -anlp|grep 80|grep tcp|awk '{print $5}'|awk -F: '{print $1}'|sort|uniq -c|sort -nr|head -n20
    netstat -ant |awk '/:80/{split($5,ip,":");++A[ip[1]]}END{for(i in A) print A,i}' |sort -rn|head -n20

    5.用tcpdump嗅探80port的訪问看看谁最高

    tcpdump -i eth0 -tnn dst port 80 -c 1000 | awk -F"." '{print $1"."$2"."$3"."$4}' | sort | uniq -c | sort -nr |head -20

    6.查找较多time_wait连接

    netstat -n|grep TIME_WAIT|awk '{print $5}'|sort|uniq -c|sort -rn|head -n20

    7.找查较多的SYN连接

    netstat -an | grep SYN | awk '{print $5}' | awk -F: '{print $1}' | sort | uniq -c | sort -nr | more
  • 相关阅读:
    HackerRank "Minimum Average Waiting Time" !
    HackerRank "Components in a graph"
    LeetCode "Range Sum Query
    LeetCode "Additive Number"
    LintCode "Post Office Problem" !!!
    LintCode "Longest Increasing Continuous subsequence II" !!
    LintCode "Coins in a Line III" !!
    LeetCode "Range Sum Query 2D
    LeetCode "Smallest Rectangle Enclosing Black Pixels"
    LintCode "Coins in a Line II" !
  • 原文地址:https://www.cnblogs.com/mengfanrong/p/5228600.html
Copyright © 2011-2022 走看看