原创作品，出自 “深蓝的blog” 博客，欢迎转载，转载时请务必注明下面出处，否则追究版权法律责任。
深蓝的blog：http://blog.csdn.net/huangyanlong/article/details/40779253
环境：CentOS 6.4 64bit、grid 64bit、oracle11g 64bit
简述：
安装grid之前，手工进行环境检验，例如以下提示须要运行runfixup.sh脚本，下面将此
过程展现例如以下：
[grid@test1 grid]$ ./runcluvfy.sh stage -pre crsinst -n test1,test2 -fixup –verbose
--对两个节点进行安装grid检验
......
......
......
Check: Time zone consistency
Result: Time zone consistency check passed
Fixup information has been generated for following node(s):
test2,test1
Please run the following script on each node as "root" user to execute the fixups:
'/tmp/CVU_11.2.0.3.0_grid/runfixup.sh'
Pre-check for cluster services setup was unsuccessful on all the nodes.
[root@test1~]# /tmp/CVU_11.2.0.3.0_grid/runfixup.sh
--在节点1上运行脚本
Response file being used is :/tmp/CVU_11.2.0.3.0_grid/fixup.response
Enable file being used is :/tmp/CVU_11.2.0.3.0_grid/fixup.enable
Log file location: /tmp/CVU_11.2.0.3.0_grid/orarun.log
uid=501(grid) gid=501(oinstall) groups=501(oinstall),502(dba),503(asmadmin),504(asmdba),505(asmoper)
[root@test2 ~]# /tmp/CVU_11.2.0.3.0_grid/runfixup.sh
--在节点2上运行脚本
Response file being used is :/tmp/CVU_11.2.0.3.0_grid/fixup.response
Enable file being used is :/tmp/CVU_11.2.0.3.0_grid/fixup.enable
Log file location: /tmp/CVU_11.2.0.3.0_grid/orarun.log
uid=501(grid) gid=501(oinstall) groups=501(oinstall),502(dba),503(asmadmin),504(asmdba),505(asmoper)
将脚本运行完后，该提示不再出现，接下来顺利安装grid就可以。
原创作品，出自 “深蓝的blog” 博客。欢迎转载，转载时请务必注明下面出处，否则追究版权法律责任。
深蓝的blog：http://blog.csdn.net/huangyanlong/article/details/40779253