zoukankan      html  css  js  c++  java
  • poj3281

    Dining
    Time Limit: 2000MS   Memory Limit: 65536K
    Total Submissions: 10843   Accepted: 4974

    Description

    Cows are such finicky eaters. Each cow has a preference for certain foods and drinks, and she will consume no others.

    Farmer John has cooked fabulous meals for his cows, but he forgot to check his menu against their preferences. Although he might not be able to stuff everybody, he wants to give a complete meal of both food and drink to as many cows as possible.

    Farmer John has cooked F (1 ≤ F ≤ 100) types of foods and prepared D (1 ≤ D ≤ 100) types of drinks. Each of his N (1 ≤ N ≤ 100) cows has decided whether she is willing to eat a particular food or drink a particular drink. Farmer John must assign a food type and a drink type to each cow to maximize the number of cows who get both.

    Each dish or drink can only be consumed by one cow (i.e., once food type 2 is assigned to a cow, no other cow can be assigned food type 2).

    Input

    Line 1: Three space-separated integers: NF, and D 
    Lines 2..N+1: Each line i starts with a two integers Fi and Di, the number of dishes that cow i likes and the number of drinks that cow i likes. The next Fi integers denote the dishes that cow i will eat, and the Di integers following that denote the drinks that cow i will drink.

    Output

    Line 1: A single integer that is the maximum number of cows that can be fed both food and drink that conform to their wishes

    Sample Input

    4 3 3
    2 2 1 2 3 1
    2 2 2 3 1 2
    2 2 1 3 1 2
    2 1 1 3 3

    Sample Output

    3

    Hint

    One way to satisfy three cows is: 
    Cow 1: no meal 
    Cow 2: Food #2, Drink #2 
    Cow 3: Food #1, Drink #1 
    Cow 4: Food #3, Drink #3 
    The pigeon-hole principle tells us we can do no better since there are only three kinds of food or drink. Other test data sets are more challenging, of course.

    题目大意:有F种食物。D种饮料。N头奶牛。仅仅能吃某种食物和饮料(并且仅仅能吃特定的一份),一种食物被一头牛吃了之后。其余牛就不能吃了
    第一行有N,F,D三个整数
    接着2-N+1行代表第i头牛,前面两个整数是Fi与Di(食物与饮料的种类数量),接着是食物的种类与饮料的种类
    要求输出最多分配可以满足的牛的数量

    解题思路:建图,有2*n+f+d+2个顶点
    0表示源点,2*n+f+d+1表示汇点
    由源点指向食物,再由食物指向牛,牛再指向相应的饮料,饮料再指向汇点
    当然要使每一头牛都相应每一份食物与饮料,所以应该牛i指向牛i再指向饮料,这样就能够避免一头牛仅仅占用多份食物与饮料了
    所有是有向的边,并且权值所有为1
    我在这里是1到f为食物点。f+1到f+2*n为牛点,f+2*n+1到f+2*n+d为饮料点


    代码:

    type 
      edge=record
        y,r,next,op:longint;
      end;
    var
      g:array[0..10000] of edge;
      level,q,h:array[0..10000] of longint;
      n,m,f,i,j,a,b,c,tot,vs,ii,vt,x,y,k,ans:longint;
      s:string;

    function bfs:boolean;
    var
      i,f,r,tmp,v,u:longint;
    begin
      fillchar(level,sizeof(level),0);
      f:=1;  r:=1;
      q[f]:=vs;  level[vs]:=1;
      repeat
        v:=q[f];    tmp:=h[v];
        while tmp<>-1 do
          begin
            u:=g[tmp].y;
            if (g[tmp].r<>0) and (level[u]=0) then
              begin
                level[u]:=level[v]+1;
                inc(r);    q[r]:=u;
                if u=vt then exit(true);
              end;
            tmp:=g[tmp].next;
          end;
        inc(f);
      until f>r;
      exit(false);
    end;

    function min(x,y:longint):longint;
    begin
      if x<y then
      exit(x);
      exit(y);
    end;

    function dfs(v,a:longint):longint;
    var
      ans,flow,tmp,u,value:longint;
    begin
      if (v=vt) or (a=0) then exit(a);
      ans:=0;  tmp:=h[v];
      while tmp<>-1 do
        begin
          u:=g[tmp].y;    value:=g[tmp].r;
          if (level[u]=level[v]+1)  then
            begin
              flow:=dfs(u,min(a,value));
              if flow<>0 then
                begin
                  g[tmp].r:=g[tmp].r-flow;
                  g[g[tmp].op].r:=g[g[tmp].op].r+flow;
                  ans:=ans+flow;
                  a:=a-flow;
                  if a=0 then break;
                end;
            end;
          tmp:=g[tmp].next;
        end;
      exit(ans);
    end;

    procedure add(a,b,c:longint);
    begin
      inc(tot);
      g[tot].y:=b;
      g[tot].r:=c;
      g[tot].next:=h[a];
      h[a]:=tot;
      g[tot].op:=tot+1;
      inc(tot);
      g[tot].y:=a;
      g[tot].r:=0;
      g[tot].next:=h[b];
      h[b]:=tot;
      g[tot].op:=tot-1;
    end;

    begin
      while not eof do
      begin
        fillchar(g,sizeof(g),0);
        fillchar(h,sizeof(h),$ff);
        fillchar(level,sizeof(level),0);
        fillchar(q,sizeof(q),0);
        readln(n,f,m);
        tot:=0;
        ans:=0;
        vs:=0;
        vt:=2*n+f+m+1;
        for i:=1 to n do
        begin
          x:=0;
          y:=0;
          a:=0;
          add(i+f,i+n+f,1);
          readln(s);
          for j:=1 to length(s) do
          begin
            if s[j]=' ' then
            break;
            x:=x*10+ord(s[j])-ord('0');
          end;
          ii:=j+1;
          for j:=ii to length(s) do
          begin
            if s[j]=' ' then
            break;
            y:=y*10+ord(s[j])-ord('0');
          end;
          k:=0;
          ii:=j+1;
          while k<x do
          begin
            if (s[ii]=' ') or (ii>length(s)) then
            begin
              add(a,f+i,1);
              a:=0;
              inc(ii);
              inc(k);
            end else
            begin
              a:=a*10+ord(s[ii])-ord('0');
              inc(ii);
            end;
          end;
          k:=0;
          while k<y do
          begin
            if (s[ii]=' ') or (ii>length(s)) then
            begin
              add(f+n+i,f+2*n+a,1);
              a:=0;
              inc(ii);
              inc(k);
            end else
            begin
              a:=a*10+ord(s[ii])-ord('0');
              inc(ii);
            end;
          end;
        end;
        for i:=1 to f do
        add(0,i,1);
        for i:=1 to m do
        add(i+2*n+f,2*n+f+m+1,1);
        while bfs do
        begin
          ans:=ans+dfs(vs,maxlongint);
        end;
        writeln(ans);
      end;
    end.

  • 相关阅读:
    2013年工作中用到的10个命令:11-20
    2013年工作中用到的10个命令:11-20
    2013年工作中用到的10个命令:1-10
    OpenJDK源码研究笔记(十):枚举的高级用法,枚举实现接口,竟是别有洞天
    OpenJDK源码研究笔记(十):枚举的高级用法,枚举实现接口,竟是别有洞天
    Java实现 LeetCode 240 搜索二维矩阵 II(二)
    Java实现 LeetCode 239 滑动窗口最大值
    Java实现 LeetCode 239 滑动窗口最大值
    Java实现 LeetCode 239 滑动窗口最大值
    Java实现 LeetCode 238 除自身以外数组的乘积
  • 原文地址:https://www.cnblogs.com/mfrbuaa/p/5379997.html
Copyright © 2011-2022 走看看