URL构造
命名参数规范+匿名对象
routes.MapRoute(name: "Default",url: "{controller}/{action}/{id}", defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional } ); |
构造路由然后添加
|
|
Route myRoute = new Route("{controller}/{action}", new MvcRouteHandler());routes.Add("MyRoute", myRoute); |
直接方法重载+匿名对象
|
1
|
routes.MapRoute("ShopSchema", "Shop/{action}", new { controller = "Home" }); |
个人觉得第一种比较易懂，第二种方便调试，第三种写起来比较效率吧。各取所需吧。本文行文偏向于第三种。
路由规则
1.默认路由(MVC自带)
|
|
routes.MapRoute("Default", // 路由名称"{controller}/{action}/{id}", // 带有参数的 URLnew { controller = "Home", action = "Index", id = UrlParameter.Optional } // 参数默认值 (UrlParameter.Optional-可选的意思) ); |
2.静态URL段
|
|
routes.MapRoute("ShopSchema2", "Shop/OldAction", new { controller = "Home", action = "Index" });routes.MapRoute("ShopSchema", "Shop/{action}", new { controller = "Home" });routes.MapRoute("ShopSchema2", "Shop/OldAction.js", new { controller = "Home", action = "Index" }); |
没有占位符路由就是现成的写死的。
比如这样写然后去访问http://localhost:XXX/Shop/OldAction.js，response也是完全没问题的。 controller , action , area这三个保留字就别设静态变量里面了。
3.自定义常规变量URL段（好吧这翻译暴露智商了）
|
|
routes.MapRoute("MyRoute2", "{controller}/{action}/{id}", new { controller = "Home", action = "Index", id = "DefaultId" }); |
这种情况如果访问 /Home/Index 的话，因为第三段（id）没有值，根据路由规则这个参数会被设为DefaultId
这个用viewbag给title赋值就能很明显看出
|
|
ViewBag.Title = RouteData.Values["id"]; |
图不贴了，结果是标题显示为DefaultId。 注意要在控制器里面赋值，在视图赋值没法编译的。
4.再述默认路由
然后再回到默认路由。 UrlParameter.Optional这个叫可选URL段.路由里没有这个参数的话id为null。 照原文大致说法，这个可选URL段能用来实现一个关注点的分离。刚才在路由里直接设定参数默认值其实不是很好。照我的理解，实际参数是用户发来的，我们做的只是定义形式参数名。但是，如果硬要给参数赋默认值的话，建议用语法糖写到action参数里面。比如：
|
1
|
public ActionResult Index(string id = "abcd"){ViewBag.Title = RouteData.Values["id"];return View();} |
5.可变长度路由。
|
1
|
routes.MapRoute("MyRoute", "{controller}/{action}/{id}/{*catchall}", new { controller = "Home", action = "Index", id = UrlParameter.Optional }); |
在这里id和最后一段都是可变的，所以 /Home/Index/dabdafdaf 等效于 /Home/Index//abcdefdjldfiaeahfoeiho 等效于 /Home/Index/All/Delete/Perm/.....
6.跨命名空间路由
这个提醒一下记得引用命名空间，开启IIS网站不然就是404。这个非常非主流，不建议瞎搞。
|
1
|
routes.MapRoute("MyRoute","{controller}/{action}/{id}/{*catchall}", new { controller = "Home", action = "Index", id = UrlParameter.Optional },new[] { "URLsAndRoutes.AdditionalControllers", "UrlsAndRoutes.Controllers" }); |
但是这样写的话数组排名不分先后的，如果有多个匹配的路由会报错。 然后作者提出了一种改进写法。
|
|
routes.MapRoute("AddContollerRoute","Home/{action}/{id}/{*catchall}",new { controller = "Home", action = "Index", id = UrlParameter.Optional },new[] { "URLsAndRoutes.AdditionalControllers" });routes.MapRoute("MyRoute", "{controller}/{action}/{id}/{*catchall}", new { controller = "Home", action = "Index", id = UrlParameter.Optional },new[] { "URLsAndRoutes.Controllers" }); |
这样第一个URL段不是Home的都交给第二个处理 最后还可以设定这个路由找不到的话就不给后面的路由留后路啦，也就不再往下找啦。
|
1
2
3
4
|
Route myRoute = routes.MapRoute("AddContollerRoute","Home/{action}/{id}/{*catchall}",new { controller = "Home", action = "Index", id = UrlParameter.Optional },new[] { "URLsAndRoutes.AdditionalControllers" }); myRoute.DataTokens["UseNamespaceFallback"] = false; |
7.正则表达式匹配路由
|
1
2
3
4
|
routes.MapRoute("MyRoute", "{controller}/{action}/{id}/{*catchall}", new { controller = "Home", action = "Index", id = UrlParameter.Optional }, new { controller = "^H.*"},new[] { "URLsAndRoutes.Controllers"}); |
约束多个URL
|
1
2
3
4
|
routes.MapRoute("MyRoute", "{controller}/{action}/{id}/{*catchall}",new { controller = "Home", action = "Index", id = UrlParameter.Optional },new { controller = "^H.*", action = "^Index$|^About$"},new[] { "URLsAndRoutes.Controllers"}); |
8.指定请求方法
|
1
2
3
4
5
6
7
|
routes.MapRoute("MyRoute", "{controller}/{action}/{id}/{*catchall}",new { controller = "Home", action = "Index", id = UrlParameter.Optional },new { controller = "^H.*", action = "Index|About", httpMethod = new HttpMethodConstraint("GET") },new[] { "URLsAndRoutes.Controllers" }); |
9. WebForm支持
|
1
2
3
4
5
6
7
|
routes.MapPageRoute("", "", "~/Default.aspx"); routes.MapPageRoute("list", "Items/{action}", "~/Items/list.aspx", false, new RouteValueDictionary { { "action", "all" } }); routes.MapPageRoute("show", "Show/{action}", "~/show.aspx", false, new RouteValueDictionary { { "action", "all" } }); routes.MapPageRoute("edit", "Edit/{id}", "~/edit.aspx", false, new RouteValueDictionary { { "id", "1" } }, new RouteValueDictionary { { "id", @"d+" } }); |
具体的可以看
使用Asp.Net4新特性路由创建WebForm应用
或者官方msdn
10.MVC5的RouteAttribute
首先要在路由注册方法那里
|
1
2
|
//启用路由特性映射routes.MapMvcAttributeRoutes(); |
这样
|
1
|
[Route("Login")] |
route特性才有效.该特性有好几个重载.还有路由约束啊,顺序啊,路由名之类的.
其他的还有路由前缀,路由默认值
|
1
|
[RoutePrefix("reviews")]<br>[Route("{action=index}")]<br>public class ReviewsController : Controller<br>{<br>} |
路由构造
|
1
2
3
4
5
6
7
|
// eg: /users/5[Route("users/{id:int}"]public ActionResult GetUserById(int id) { ... } // eg: users/ken[Route("users/{name}"]public ActionResult GetUserByName(string name) { ... } |
参数限制
|
1
2
3
4
5
|
// eg: /users/5// but not /users/10000000000 because it is larger than int.MaxValue,// and not /users/0 because of the min(1) constraint.[Route("users/{id:int:min(1)}")]public ActionResult GetUserById(int id) { ... } |
| Constraint | Description | Example |
|---|---|---|
| alpha | Matches uppercase or lowercase Latin alphabet characters (a-z, A-Z) | {x:alpha} |
| bool | Matches a Boolean value. | {x:bool} |
| datetime | Matches a DateTime value. | {x:datetime} |
| decimal | Matches a decimal value. | {x:decimal} |
| double | Matches a 64-bit floating-point value. | {x:double} |
| float | Matches a 32-bit floating-point value. | {x:float} |
| guid | Matches a GUID value. | {x:guid} |
| int | Matches a 32-bit integer value. | {x:int} |
| length | Matches a string with the specified length or within a specified range of lengths. | {x:length(6)} {x:length(1,20)} |
| long | Matches a 64-bit integer value. | {x:long} |
| max | Matches an integer with a maximum value. | {x:max(10)} |
| maxlength | Matches a string with a maximum length. | {x:maxlength(10)} |
| min | Matches an integer with a minimum value. | {x:min(10)} |
| minlength | Matches a string with a minimum length. | {x:minlength(10)} |
| range | Matches an integer within a range of values. | {x:range(10,50)} |
| regex | Matches a regular expression. | {x:regex(^d{3}-d{3}-d{4}$)} |
具体的可以参考
Attribute Routing in ASP.NET MVC 5
对我来说,这样的好处是分散了路由规则的定义.有人喜欢集中,我个人比较喜欢这种灵活的处理.因为这个action定义好后,我不需要跑到配置那里定义对应的路由规则
11.最后还是不爽的话自己写个类实现 IRouteConstraint的匹配方法。
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
|
using System;using System.Collections.Generic;using System.Linq;using System.Web;using System.Web.Routing;/// <summary>/// If the standard constraints are not sufficient for your needs, you can define your own custom constraints by implementing the IRouteConstraint interface./// </summary>public class UserAgentConstraint : IRouteConstraint{ private string requiredUserAgent; public UserAgentConstraint(string agentParam) { requiredUserAgent = agentParam; } public bool Match(HttpContextBase httpContext, Route route, string parameterName, RouteValueDictionary values, RouteDirection routeDirection) { return httpContext.Request.UserAgent != null && httpContext.Request.UserAgent.Contains(requiredUserAgent); }} |
|
1
2
3
4
5
6
7
|
routes.MapRoute("ChromeRoute", "{*catchall}",new { controller = "Home", action = "Index" },new { customConstraint = new UserAgentConstraint("Chrome") },new[] { "UrlsAndRoutes.AdditionalControllers" }); |
比如这个就用来匹配是否是用谷歌浏览器访问网页的。
12.访问本地文档
|
1
2
3
|
routes.RouteExistingFiles = true;routes.MapRoute("DiskFile", "Content/StaticContent.html", new { controller = "Customer", action = "List", }); |
浏览网站，以开启 IIS Express，然后点显示所有应用程序-点击网站名称-配置（applicationhost.config）-搜索UrlRoutingModule节点
|
1
|
<add name="UrlRoutingModule-4.0" type="System.Web.Routing.UrlRoutingModule" preCondition="managedHandler,runtimeVersionv4.0" /> |
把这个节点里的preCondition删除，变成
|
1
|
<add name="UrlRoutingModule-4.0" type="System.Web.Routing.UrlRoutingModule" preCondition="" /> |
13.直接访问本地资源，绕过了路由系统
|
1
|
routes.IgnoreRoute("Content/{filename}.html"); |
文件名还可以用 {filename}占位符。
IgnoreRoute方法是RouteCollection里面StopRoutingHandler类的一个实例。路由系统通过硬-编码识别这个Handler。如果这个规则匹配的话，后面的规则都无效了。 这也就是默认的路由里面routes.IgnoreRoute("{resource}.axd/{*pathInfo}");写最前面的原因。
路由测试（在测试项目的基础上，要装moq）
|
1
|
PM> Install-Package Moq |
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
|
using System;using Microsoft.VisualStudio.TestTools.UnitTesting;using System.Web;using Moq;using System.Web.Routing;using System.Reflection;[TestClass]public class RoutesTest{ private HttpContextBase CreateHttpContext(string targetUrl = null, string HttpMethod = "GET") { // create the mock request Mock<HttpRequestBase> mockRequest = new Mock<HttpRequestBase>(); mockRequest.Setup(m => m.AppRelativeCurrentExecutionFilePath) .Returns(targetUrl); mockRequest.Setup(m => m.HttpMethod).Returns(HttpMethod); // create the mock response Mock<HttpResponseBase> mockResponse = new Mock<HttpResponseBase>(); mockResponse.Setup(m => m.ApplyAppPathModifier( It.IsAny<string>())).Returns<string>(s => s); // create the mock context, using the request and response Mock<HttpContextBase> mockContext = new Mock<HttpContextBase>(); mockContext.Setup(m => m.Request).Returns(mockRequest.Object); mockContext.Setup(m => m.Response).Returns(mockResponse.Object); // return the mocked context return mockContext.Object; } private void TestRouteMatch(string url, string controller, string action, object routeProperties = null, string httpMethod = "GET") { // Arrange RouteCollection routes = new RouteCollection(); RouteConfig.RegisterRoutes(routes); // Act - process the route RouteData result = routes.GetRouteData(CreateHttpContext(url, httpMethod)); // Assert Assert.IsNotNull(result); Assert.IsTrue(TestIncomingRouteResult(result, controller, action, routeProperties)); } private bool TestIncomingRouteResult(RouteData routeResult, string controller, string action, object propertySet = null) { Func<object, object, bool> valCompare = (v1, v2) => { return StringComparer.InvariantCultureIgnoreCase .Compare(v1, v2) == 0; }; bool result = valCompare(routeResult.Values["controller"], controller) && valCompare(routeResult.Values["action"], action); if (propertySet != null) { PropertyInfo[] propInfo = propertySet.GetType().GetProperties(); foreach (PropertyInfo pi in propInfo) { if (!(routeResult.Values.ContainsKey(pi.Name) && valCompare(routeResult.Values[pi.Name], pi.GetValue(propertySet, null)))) { result = false; break; } } } return result; } private void TestRouteFail(string url) { // Arrange RouteCollection routes = new RouteCollection(); RouteConfig.RegisterRoutes(routes); // Act - process the route RouteData result = routes.GetRouteData(CreateHttpContext(url)); // Assert Assert.IsTrue(result == null || result.Route == null); } [TestMethod] public void TestIncomingRoutes() { // check for the URL that we hope to receive TestRouteMatch("~/Admin/Index", "Admin", "Index"); // check that the values are being obtained from the segments TestRouteMatch("~/One/Two", "One", "Two"); // ensure that too many or too few segments fails to match TestRouteFail("~/Admin/Index/Segment");//失败 TestRouteFail("~/Admin");//失败 TestRouteMatch("~/", "Home", "Index"); TestRouteMatch("~/Customer", "Customer", "Index"); TestRouteMatch("~/Customer/List", "Customer", "List"); TestRouteFail("~/Customer/List/All");//失败 TestRouteMatch("~/Customer/List/All", "Customer", "List", new { id = "All" }); TestRouteMatch("~/Customer/List/All/Delete", "Customer", "List", new { id = "All", catchall = "Delete" }); TestRouteMatch("~/Customer/List/All/Delete/Perm", "Customer", "List", new { id = "All", catchall = "Delete/Perm" }); }} |
最后还是再推荐一下Adam Freeman写的apress.pro.asp.net.mvc.4这本书。