spring-context中@ComponentScans和@ComponentScan的源码解析说明

spring版本为5.0.11

@ComponentScan注解默认会装配标识了@Controller，@Service，@Repository，@Component注解的类到spring容器中

@ComponentScan源码

/**
 * Configures component scanning directives for use with @{@link Configuration} classes.
 * Provides support parallel with Spring XML's {@code <context:component-scan>} element.
 *
 * <p>Either {@link #basePackageClasses} or {@link #basePackages} (or its alias
 * {@link #value}) may be specified to define specific packages to scan. If specific
 * packages are not defined, scanning will occur from the package of the
 * class that declares this annotation.
 *
 * <p>Note that the {@code <context:component-scan>} element has an
 * {@code annotation-config} attribute; however, this annotation does not. This is because
 * in almost all cases when using {@code @ComponentScan}, default annotation config
 * processing (e.g. processing {@code @Autowired} and friends) is assumed. Furthermore,
 * when using {@link AnnotationConfigApplicationContext}, annotation config processors are
 * always registered, meaning that any attempt to disable them at the
 * {@code @ComponentScan} level would be ignored.
 *
 * <p>See {@link Configuration @Configuration}'s Javadoc for usage examples.
 *
 * @author Chris Beams
 * @author Juergen Hoeller
 * @author Sam Brannen
 * @since 3.1
 * @see Configuration
 */
@Retention(RetentionPolicy.RUNTIME)
@Target(ElementType.TYPE)//只能标注在类上
@Documented
@Repeatable(ComponentScans.class)
public @interface ComponentScan {

    /**
     * 对应的包扫描路径 可以是单个路径，也可以是扫描的路径数组
     * Alias for {@link #basePackages}.
     * <p>Allows for more concise annotation declarations if no other attributes
     * are needed &mdash; for example, {@code @ComponentScan("org.my.pkg")}
     * instead of {@code @ComponentScan(basePackages = "org.my.pkg")}.
     */
    @AliasFor("basePackages")
    String[] value() default {};

    /**
     * 和value一样
     * Base packages to scan for annotated components.
     * <p>{@link #value} is an alias for (and mutually exclusive with) this
     * attribute.
     * <p>Use {@link #basePackageClasses} for a type-safe alternative to
     * String-based package names.
     */
    @AliasFor("value")
    String[] basePackages() default {};

    /**
     * 指定具体的扫描的类
     * Type-safe alternative to {@link #basePackages} for specifying the packages
     * to scan for annotated components. The package of each class specified will be scanned.
     * <p>Consider creating a special no-op marker class or interface in each package
     * that serves no purpose other than being referenced by this attribute.
     */
    Class<?>[] basePackageClasses() default {};

    /**
     * 对应的bean名称的生成器 默认的是BeanNameGenerator
     * The {@link BeanNameGenerator} class to be used for naming detected components
     * within the Spring container.
     * <p>The default value of the {@link BeanNameGenerator} interface itself indicates
     * that the scanner used to process this {@code @ComponentScan} annotation should
     * use its inherited bean name generator, e.g. the default
     * {@link AnnotationBeanNameGenerator} or any custom instance supplied to the
     * application context at bootstrap time.
     * @see AnnotationConfigApplicationContext#setBeanNameGenerator(BeanNameGenerator)
     */
    Class<? extends BeanNameGenerator> nameGenerator() default BeanNameGenerator.class;

    /**
     * 处理检测到的bean的scope范围
     * The {@link ScopeMetadataResolver} to be used for resolving the scope of detected components.
     */
    Class<? extends ScopeMetadataResolver> scopeResolver() default AnnotationScopeMetadataResolver.class;

    /**
     * 是否为检测到的组件生成代理
     * Indicates whether proxies should be generated for detected components, which may be
     * necessary when using scopes in a proxy-style fashion.
     * <p>The default is defer to the default behavior of the component scanner used to
     * execute the actual scan.
     * <p>Note that setting this attribute overrides any value set for {@link #scopeResolver}.
     * @see ClassPathBeanDefinitionScanner#setScopedProxyMode(ScopedProxyMode)
     */
    ScopedProxyMode scopedProxy() default ScopedProxyMode.DEFAULT;

    /**
     * 控制符合组件检测条件的类文件   默认是包扫描下的  **/*.class
     * Controls the class files eligible for component detection.
     * <p>Consider use of {@link #includeFilters} and {@link #excludeFilters}
     * for a more flexible approach.
     */
    String resourcePattern() default ClassPathScanningCandidateComponentProvider.DEFAULT_RESOURCE_PATTERN;

    /**
     * 是否对带有@Component @Repository @Service @Controller注解的类开启检测,默认是开启的
     * Indicates whether automatic detection of classes annotated with {@code @Component}
     * {@code @Repository}, {@code @Service}, or {@code @Controller} should be enabled.
     */
    boolean useDefaultFilters() default true;

    /**
     * 指定某些定义Filter满足条件的组件 FilterType有5种类型如：
                                        ANNOTATION, 注解类型 默认
                                        ASSIGNABLE_TYPE,指定固定类
                                        ASPECTJ， ASPECTJ类型
                                        REGEX,正则表达式
                                        CUSTOM,自定义类型
     * Specifies which types are eligible for component scanning.
     * <p>Further narrows the set of candidate components from everything in {@link #basePackages}
     * to everything in the base packages that matches the given filter or filters.
     * <p>Note that these filters will be applied in addition to the default filters, if specified.
     * Any type under the specified base packages which matches a given filter will be included,
     * even if it does not match the default filters (i.e. is not annotated with {@code @Component}).
     * @see #resourcePattern()
     * @see #useDefaultFilters()
     */
    Filter[] includeFilters() default {};

    /**
     * 排除某些过来器扫描到的类
     * Specifies which types are not eligible for component scanning.
     * @see #resourcePattern
     */
    Filter[] excludeFilters() default {};

    /**
     * 扫描到的类是都开启懒加载 ，默认是不开启的
     * Specify whether scanned beans should be registered for lazy initialization.
     * <p>Default is {@code false}; switch this to {@code true} when desired.
     * @since 4.1
     */
    boolean lazyInit() default false;


    /**
     * Declares the type filter to be used as an {@linkplain ComponentScan#includeFilters
     * include filter} or {@linkplain ComponentScan#excludeFilters exclude filter}.
     */
    @Retention(RetentionPolicy.RUNTIME)
    @Target({})
    @interface Filter {

        /**
         * The type of filter to use.
         * <p>Default is {@link FilterType#ANNOTATION}.
         * @see #classes
         * @see #pattern
         */
        FilterType type() default FilterType.ANNOTATION;

        /**
         * Alias for {@link #classes}.
         * @see #classes
         */
        @AliasFor("classes")
        Class<?>[] value() default {};

        /**
         * The class or classes to use as the filter.
         * <p>The following table explains how the classes will be interpreted
         * based on the configured value of the {@link #type} attribute.
         * <table border="1">
         * <tr><th>{@code FilterType}</th><th>Class Interpreted As</th></tr>
         * <tr><td>{@link FilterType#ANNOTATION ANNOTATION}</td>
         * <td>the annotation itself</td></tr>
         * <tr><td>{@link FilterType#ASSIGNABLE_TYPE ASSIGNABLE_TYPE}</td>
         * <td>the type that detected components should be assignable to</td></tr>
         * <tr><td>{@link FilterType#CUSTOM CUSTOM}</td>
         * <td>an implementation of {@link TypeFilter}</td></tr>
         * </table>
         * <p>When multiple classes are specified, <em>OR</em> logic is applied
         * &mdash; for example, "include types annotated with {@code @Foo} OR {@code @Bar}".
         * <p>Custom {@link TypeFilter TypeFilters} may optionally implement any of the
         * following {@link org.springframework.beans.factory.Aware Aware} interfaces, and
         * their respective methods will be called prior to {@link TypeFilter#match match}:
         * <ul>
         * <li>{@link org.springframework.context.EnvironmentAware EnvironmentAware}</li>
         * <li>{@link org.springframework.beans.factory.BeanFactoryAware BeanFactoryAware}
         * <li>{@link org.springframework.beans.factory.BeanClassLoaderAware BeanClassLoaderAware}
         * <li>{@link org.springframework.context.ResourceLoaderAware ResourceLoaderAware}
         * </ul>
         * <p>Specifying zero classes is permitted but will have no effect on component
         * scanning.
         * @since 4.2
         * @see #value
         * @see #type
         */
        @AliasFor("value")
        Class<?>[] classes() default {};

        /**
         * The pattern (or patterns) to use for the filter, as an alternative
         * to specifying a Class {@link #value}.
         * <p>If {@link #type} is set to {@link FilterType#ASPECTJ ASPECTJ},
         * this is an AspectJ type pattern expression. If {@link #type} is
         * set to {@link FilterType#REGEX REGEX}, this is a regex pattern
         * for the fully-qualified class names to match.
         * @see #type
         * @see #classes
         */
        String[] pattern() default {};

    }

}

@ComponentScans源码

/**
 * Container annotation that aggregates several {@link ComponentScan} annotations.
 *
 * <p>Can be used natively, declaring several nested {@link ComponentScan} annotations.
 * Can also be used in conjunction with Java 8's support for repeatable annotations,
 * where {@link ComponentScan} can simply be declared several times on the same method,
 * implicitly generating this container annotation.
 *
 * @author Juergen Hoeller
 * @since 4.3
 * @see ComponentScan
 */
@Retention(RetentionPolicy.RUNTIME)
@Target(ElementType.TYPE)
@Documented
public @interface ComponentScans {

    ComponentScan[] value();

}