zoukankan      html  css  js  c++  java
  • 树链剖分-链的剖分(线段树维护+离线操作)

    hdu3804

    Query on a tree

    Time Limit: 15000/5000 MS (Java/Others) Memory Limit: 32768/32768 K (Java/Others)
    Total Submission(s): 622 Accepted Submission(s): 146


    Problem Description
    There are some queries on a tree which has n nodes. Every query is described as two integers (X, Y).For each query, you should find the maximum weight of the edges in set E, which satisfies the following two conditions.
    1) The edge must on the path from node X to node 1.
    2) The edge’s weight should be lower or equal to Y.
    Now give you the tree and queries. Can you find out the answer for each query?
    Input
    The first line of the input is an integer T, indicating the number of test cases. For each case, the first line contains an integer n indicates the number of nodes in the tree. Then n-1 lines follows, each line contains three integers X, Y, W indicate an edge between node X and node Y whose value is W. Then one line has one integer Q indicates the number of queries. In the next Q lines, each line contains two integers X and Y as said above.
    Output
    For each test case, you should output Q lines. If no edge satisfy the conditions described above,just output “-1” for this query. Otherwise output the answer for this query.
    Sample Input
    1 3 1 2 7 2 3 5 4 3 10 3 7 3 6 3 4
    Sample Output
    7 7 5 -1
    Hint
    2<=n<=10^5 2<=Q<=10^5 1<=W,Y<=10^9 The data is guaranteed that your program will overflow if you use recursion.

    分析:首先把边的权值从小到达排列,然后把询问的y值也从小到达排列,然后对于每一个询问,把小于y值的边更新到线段树中,接着求出该次询问的最大值,把答案记录到原来顺序的数组里面,最后输出即可;

    程序:

    #pragma comment(linker, "/STACK:102400000,102400000")
    #include"stdio.h"
    #include"string.h"
    #include"iostream"
    #include"map"
    #include"string"
    #include"queue"
    #include"stdlib.h"
    #include"math.h"
    #define M 100009
    #define inf 100000000
    using namespace std;
    struct node
    {
         int u,v,next;
    }edge[M*2];
    int t,head[M],son[M],fa[M],num[M],p[M],fp[M],deep[M],cnt[M],pos,top[M],Max;
    void init()
    {
         t=pos=0;
         memset(head,-1,sizeof(head));
         memset(son,-1,sizeof(son));
    }
    void add(int u,int v)
    {
         edge[t].u=u;
         edge[t].v=v;
         edge[t].next=head[u];
         head[u]=t++;
    }
    void dfs(int u,int f,int d)
    {
         deep[u]=d;
         fa[u]=f;
         num[u]=1;
         for(int i=head[u];i!=-1;i=edge[i].next)
         {
              int v=edge[i].v;
              if(v!=f)
              {
                   dfs(v,u,d+1);
                   num[u]+=num[v];
                   if(son[u]==-1||num[son[u]]<num[v])
                        son[u]=v;
              }
         }
    }
    void getpos(int u,int sp)
    {
         top[u]=sp;
         p[u]=pos++;
         fp[p[u]]=u;
         if(son[u]==-1)return;
         getpos(son[u],sp);
         for(int i=head[u];i!=-1;i=edge[i].next)
         {
              int v=edge[i].v;
              if(v!=fa[u]&&v!=son[u])
                   getpos(v,v);
         }
    }
    struct Node
    {
         int l,r,maxi;
    }tree[M*5];
    void pushup(int i)
    {
         tree[i].maxi=max(tree[i*2].maxi,tree[i*2+1].maxi);
    }
    void make(int l,int r,int i)
    {
         tree[i].l=l;
         tree[i].r=r;
         if(l==r)
         {
              tree[i].maxi=-inf;
              return;
         }
         int mid=(l+r)/2;
         make(l,mid,i*2);
         make(mid+1,r,i*2+1);
         pushup(i);
    }
    void updata(int p,int q,int i)
    {
         if(tree[i].r==p&&tree[i].l==p)
         {
              tree[i].maxi=q;
              return;
         }
         int mid=(tree[i].l+tree[i].r)/2;
         if(p<=mid)
              updata(p,q,i*2);
         else
              updata(p,q,i*2+1);
         pushup(i);
    }
    void query(int l,int r,int i)
    {
         if(tree[i].l==l&&tree[i].r==r)
         {
              Max=max(Max,tree[i].maxi);
              return;
         }
         int mid=(tree[i].r+tree[i].l)/2;
         if(r<=mid)
              query(l,r,i*2);
         else if(l>mid)
              query(l,r,i*2+1);
         else
         {
              query(l,mid,i*2);
              query(mid+1,r,i*2+1);
         }
         pushup(i);
    }
    int findmax(int u,int v)
    {
         int f1=top[u];
         int f2=top[v];
         int ans=-inf;
         while(f1!=f2)
         {
              if(deep[f1]<deep[f2])
              {
                   swap(f1,f2);
                   swap(u,v);
              }
              Max=-inf;
              query(p[f1],p[u],1);
              ans=max(ans,Max);
              u=fa[f1];
              f1=top[u];
         }
         if(v==u)
              return  ans;
         if(deep[u]>deep[v])
              swap(u,v);
         Max=-inf;
         query(p[son[u]],p[v],1);
         ans=max(ans,Max);
         return ans;
    }
    struct Edge
    {
         int u,v,w,x,y,kk;
    }e[M],Q[M];
    int cmp(const void *a,const void *b)
    {
         return (*(struct Edge*)a).w-(*(struct Edge*)b).w;
    }
    int cmpy(const void *a,const void *b)
    {
         return (*(struct Edge*)a).y-(*(struct Edge*)b).y;
    }
    int main()
    {
         int T;
         cin>>T;
         while(T--)
         {
              int n,i;
              init();
              scanf("%d",&n);
              for(i=0;i<n-1;i++)
              {
                   scanf("%d%d%d",&e[i].u,&e[i].v,&e[i].w);
                   add(e[i].u,e[i].v);
                   add(e[i].v,e[i].u);
              }
              dfs(1,1,0);
              getpos(1,1);
              make(1,pos-1,1);
              qsort(e,n-1,sizeof(e[0]),cmp);
              int que;
              scanf("%d",&que);
              for(i=0;i<que;i++)
              {
                   scanf("%d%d",&Q[i].x,&Q[i].y);
                   Q[i].kk=i;
              }
              qsort(Q,que,sizeof(Q[0]),cmpy);
              int j=0;
    
              for(i=0;i<que;i++)
              {
                   while(j<n-1&&e[j].w<=Q[i].y)
                   {
                        if(deep[e[j].u]<deep[e[j].v])
                             swap(e[j].u,e[j].v);
                        updata(p[e[j].u],e[j].w,1);
                        j++;
                   }
                   cnt[Q[i].kk]=findmax(1,Q[i].x);
                   if(cnt[Q[i].kk]<=-inf)
                        cnt[Q[i].kk]=-1;
              }
              for(i=0;i<que;i++)
                   printf("%d
    ",cnt[i]);
         }
         return 0;
    }
    



  • 相关阅读:
    ParksLink修改密码
    ORA-01940:无法删除当前已链接的用户
    imp导入数据的时候报错:ORA-01658: 无法为表空间 MAXDATA 中的段创建 INITIAL 区
    Linux下查看日志用到的常用命令
    大批量数据高效插入数据库表
    线程中断:Thread类中interrupt()、interrupted()和 isInterrupted()方法详解
    CyclicBarrier、CountDownLatch、Callable、FutureTask、thread.join() 、wait()、notify()、Condition
    Mysql全文索引
    Docker 镜像的常用操作
    Docker 入门
  • 原文地址:https://www.cnblogs.com/mypsq/p/4348192.html
Copyright © 2011-2022 走看看