zoukankan      html  css  js  c++  java

  • 将linux和uboot集成到Android编译框架中

    环境

    Android-7.1
    Linux-4.14
    u-boot-2018-09
     

    概述

            用过高通平台的都知道，人家把Linux内核代码放到了Android代码根目录下的kernel路径下，在编译Android的时候，会连同Linux内核一块编译，最后会将编译出来的Linux内核镜像连同ramdisk.img一块打包到boot.img镜像中。下面我们仿照高通的做法，也将Linux内核代码和uboot代码集成到Android代码中。
            Android代码在编译时没有采用递归的方式，而是通过include，在Android代码根目录下生成一个巨大的Makefile。可以参考如下博客：
     
     

    正文

    一、建立一个新的产品

    下面我们首先添加一个新产品，这个新产品是基于ARMv8架构的。

    1、创建如下路径

    mkdir -p device/mycompany/myproduct

    2、在myproduct下添加如下几个文件


    • Android.mk
    ifneq ($(filter myproduct, $(TARGET_DEVICE)),)

LOCAL_PATH := $(call my-dir)

# if some modules are built directly from this directory (not subdirectories),
# their rules should be written here.

include $(call all-makefiles-under,$(LOCAL_PATH))
endif
    • AndroidProducts.mk
    #
# This file should set PRODUCT_MAKEFILES to a list of product makefiles
# to expose to the build system.  LOCAL_DIR will already be set to
# the directory containing this file.
#
# This file may not rely on the value of any variable other than
# LOCAL_DIR; do not use any conditionals, and do not look up the
# value of any variable that isn't set in this file or in a file that
# it includes.
#

PRODUCT_MAKEFILES := 
$(LOCAL_DIR)/myproduct.mk
    • myproduct.mk
    #
# Inherit the full_base and device configurations
$(call inherit-product, $(SRC_TARGET_DIR)/product/full_base.mk)

#
# Overrides
PRODUCT_NAME := myproduct
PRODUCT_DEVICE := myproduct
    • BoardConfig.mk
    TARGET_NO_BOOTLOADER := true
TARGET_NO_KERNEL := true
TARGET_NO_RECOVERY := true

# Primary Arch
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_VARIANT := generic
TARGET_CPU_ABI := arm64-v8a

# Secondary Arch
TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv7-a-neon
TARGET_2ND_CPU_VARIANT := cortex-a15
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi

TARGET_USES_64_BIT_BINDER := true
TARGET_SUPPORTS_32_BIT_APPS := true
TARGET_SUPPORTS_64_BIT_APPS := true

TARGET_BOARD_PLATFORM := myproduct
WITH_DEXPREOPT ?= true
BUILD_EMULATOR_OPENGL := true
USE_OPENGL_RENDERER := true
ANDROID_ENABLE_RENDERSCRIPT := true

# Some framework code requires this to enable BT
BOARD_HAVE_BLUETOOTH := true
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/generic/common/bluetooth

BOARD_USES_GENERIC_AUDIO := true
USE_CAMERA_STUB := true

TARGET_USERIMAGES_USE_EXT4 := true
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1610612736
BOARD_USERDATAIMAGE_PARTITION_SIZE := 1595915776
BOARD_CACHEIMAGE_PARTITION_SIZE := 268435456
BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_FLASH_BLOCK_SIZE := 512
    • vendorsetup.sh
    #
# Copyright (C) 2013 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# This file is executed by build/envsetup.sh, and can use anything
# defined in envsetup.sh.
#
# In particular, you can add lunch options with the add_lunch_combo
# function: add_lunch_combo generic-eng

add_lunch_combo myproduct-userdebug

    3、编译

    • build/envsetup.sh
    • lunch
    pengdonglin@pengdonglin-dell:~/Android7_1$ lunch

You're building on Linux

Lunch menu... pick a combo:
     1. aosp_arm-eng
     2. aosp_arm64-eng
     3. aosp_mips-eng
     4. aosp_mips64-eng
     5. aosp_x86-eng
     6. aosp_x86_64-eng
     7. full_fugu-userdebug
     8. aosp_fugu-userdebug
     9. mini_emulator_arm64-userdebug
     10. m_e_arm-userdebug
     11. m_e_mips64-eng
     12. m_e_mips-userdebug
     13. mini_emulator_x86_64-userdebug
     14. mini_emulator_x86-userdebug
     15. aosp_dragon-userdebug
     16. aosp_dragon-eng
     17. aosp_marlin-userdebug
     18. aosp_sailfish-userdebug
     19. aosp_flounder-userdebug
     20. aosp_angler-userdebug
     21. aosp_bullhead-userdebug
     22. hikey-userdebug
     23. aosp_shamu-userdebug
     24. myproduct-userdebug

Which would you like? [aosp_arm-eng] 24

============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
TARGET_PRODUCT=myproduct
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a15
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.15.0-48-generic-x86_64-with-Ubuntu-18.04-bionic
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=N2G48H
OUT_DIR=out
============================================
    • make
    pengdonglin@pengdonglin-dell:~/Android7_1$ make 
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
TARGET_PRODUCT=myproduct
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a15
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.15.0-48-generic-x86_64-with-Ubuntu-18.04-bionic
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=N2G48H
OUT_DIR=out
============================================
Running kati to generate build-myproduct.ninja...
out/build-myproduct.ninja is missing, regenerating...
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
TARGET_PRODUCT=myproduct
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a15
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.15.0-48-generic-x86_64-with-Ubuntu-18.04-bionic
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=N2G48H
OUT_DIR=out
============================================
FindEmulator: find: File system loop detected; `./linux-4.14/out64/source' is part of the same file system loop as `./linux-4.14'.
FindEmulator: find: File system loop detected; `./linux-4.14/out64/source' is part of the same file system loop as `./linux-4.14'.
including ./abi/cpp/Android.mk ...
including ./art/Android.mk ...
including ./bionic/Android.mk ...
including ./bootable/recovery/Android.mk ...
including ./build/libs/host/Android.mk ...
... ...

    二、集成Linux内核源码到Android代码中

    1、将Linux内核代码拷贝到Android代码根目录下并重命名为kernel

     

    2、添加AndroidKernel.mk到kernel中

    AndroidKernel.mk可以参考：AndroidKernel.mk
    内容如下：
    #Android makefile to build kernel as a part of Android Build
PERL        = perl

KERNEL_TARGET := $(strip $(INSTALLED_KERNEL_TARGET))
ifeq ($(KERNEL_TARGET),)
INSTALLED_KERNEL_TARGET := $(PRODUCT_OUT)/kernel
endif

TARGET_KERNEL_ARCH := $(strip $(TARGET_KERNEL_ARCH))
ifeq ($(TARGET_KERNEL_ARCH),)
KERNEL_ARCH := arm
else
KERNEL_ARCH := $(TARGET_KERNEL_ARCH)
endif

TARGET_KERNEL_HEADER_ARCH := $(strip $(TARGET_KERNEL_HEADER_ARCH))
ifeq ($(TARGET_KERNEL_HEADER_ARCH),)
KERNEL_HEADER_ARCH := $(KERNEL_ARCH)
else
$(warning Forcing kernel header generation only for '$(TARGET_KERNEL_HEADER_ARCH)')
KERNEL_HEADER_ARCH := $(TARGET_KERNEL_HEADER_ARCH)
endif

KERNEL_HEADER_DEFCONFIG := $(strip $(KERNEL_HEADER_DEFCONFIG))
ifeq ($(KERNEL_HEADER_DEFCONFIG),)
KERNEL_HEADER_DEFCONFIG := $(KERNEL_DEFCONFIG)
endif

# Force 32-bit binder IPC for 64bit kernel with 32bit userspace
ifeq ($(KERNEL_ARCH),arm64)
ifeq ($(TARGET_ARCH),arm)
KERNEL_CONFIG_OVERRIDE := CONFIG_ANDROID_BINDER_IPC_32BIT=y
endif
endif

TARGET_KERNEL_CROSS_COMPILE_PREFIX := $(strip $(TARGET_KERNEL_CROSS_COMPILE_PREFIX))
ifeq ($(TARGET_KERNEL_CROSS_COMPILE_PREFIX),)
KERNEL_CROSS_COMPILE := arm-eabi-
else
KERNEL_CROSS_COMPILE := $(TARGET_KERNEL_CROSS_COMPILE_PREFIX)
endif

ifeq ($(TARGET_PREBUILT_KERNEL),)

KERNEL_GCC_NOANDROID_CHK := $(shell (echo "int main() {return 0;}" | $(KERNEL_CROSS_COMPILE)gcc -E -mno-android - > /dev/null 2>&1 ; echo $$?))
ifeq ($(strip $(KERNEL_GCC_NOANDROID_CHK)),0)
KERNEL_CFLAGS := KCFLAGS=-mno-android
endif

KERNEL_OUT := $(TARGET_OUT_INTERMEDIATES)/KERNEL_OBJ
KERNEL_CONFIG := $(KERNEL_OUT)/.config

ifeq ($(KERNEL_DEFCONFIG)$(wildcard $(KERNEL_CONFIG)),)
$(error Kernel configuration not defined, cannot build kernel)
else

ifeq ($(TARGET_USES_UNCOMPRESSED_KERNEL),true)
$(info Using uncompressed kernel)
TARGET_PREBUILT_INT_KERNEL := $(KERNEL_OUT)/arch/$(KERNEL_ARCH)/boot/Image
else
ifeq ($(KERNEL_ARCH),arm64)
TARGET_PREBUILT_INT_KERNEL := $(KERNEL_OUT)/arch/$(KERNEL_ARCH)/boot/Image.gz
else
TARGET_PREBUILT_INT_KERNEL := $(KERNEL_OUT)/arch/$(KERNEL_ARCH)/boot/zImage
endif
endif

ifeq ($(TARGET_KERNEL_APPEND_DTB), true)
$(info Using appended DTB)
TARGET_PREBUILT_INT_KERNEL := $(TARGET_PREBUILT_INT_KERNEL)-dtb
endif

KERNEL_HEADERS_INSTALL := $(KERNEL_OUT)/usr
KERNEL_MODULES_INSTALL := system
KERNEL_MODULES_OUT := $(TARGET_OUT)/lib/modules

TARGET_PREBUILT_KERNEL := $(TARGET_PREBUILT_INT_KERNEL)

define mv-modules
mdpath=`find $(KERNEL_MODULES_OUT) -type f -name modules.dep`;
if [ "$$mdpath" != "" ];then
mpath=`dirname $$mdpath`;
ko=`find $$mpath/kernel -type f -name *.ko`;
for i in $$ko; do mv $$i $(KERNEL_MODULES_OUT)/; done;
fi
endef

define clean-module-folder
mdpath=`find $(KERNEL_MODULES_OUT) -type f -name modules.dep`;
if [ "$$mdpath" != "" ];then
mpath=`dirname $$mdpath`; rm -rf $$mpath;
fi
endef

$(KERNEL_OUT):
    mkdir -p $(KERNEL_OUT)

$(KERNEL_CONFIG): $(KERNEL_OUT)
    $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) $(KERNEL_DEFCONFIG)
    $(hide) if [ ! -z "$(KERNEL_CONFIG_OVERRIDE)" ]; then 
            echo "Overriding kernel config with '$(KERNEL_CONFIG_OVERRIDE)'"; 
            echo $(KERNEL_CONFIG_OVERRIDE) >> $(KERNEL_OUT)/.config; 
            $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) oldconfig; fi

$(TARGET_PREBUILT_INT_KERNEL): $(KERNEL_OUT) $(KERNEL_HEADERS_INSTALL)
    $(hide) echo "Building kernel..."
    $(hide) rm -rf $(KERNEL_OUT)/arch/$(KERNEL_ARCH)/boot/dts
    $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) $(KERNEL_CFLAGS)
    $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) $(KERNEL_CFLAGS) modules
    $(MAKE) -C kernel O=../$(KERNEL_OUT) INSTALL_MOD_PATH=../../$(KERNEL_MODULES_INSTALL) INSTALL_MOD_STRIP=1 ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) modules_install
    $(mv-modules)
    $(clean-module-folder)

$(KERNEL_HEADERS_INSTALL): $(KERNEL_OUT)
    $(hide) if [ ! -z "$(KERNEL_HEADER_DEFCONFIG)" ]; then 
            $(hide) rm -f ../$(KERNEL_CONFIG); 
            $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_HEADER_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) $(KERNEL_HEADER_DEFCONFIG); 
            $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_HEADER_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) headers_install; fi
    $(hide) if [ "$(KERNEL_HEADER_DEFCONFIG)" != "$(KERNEL_DEFCONFIG)" ]; then 
            echo "Used a different defconfig for header generation"; 
            $(hide) rm -f ../$(KERNEL_CONFIG); 
            $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) $(KERNEL_DEFCONFIG); fi
    $(hide) if [ ! -z "$(KERNEL_CONFIG_OVERRIDE)" ]; then 
            echo "Overriding kernel config with '$(KERNEL_CONFIG_OVERRIDE)'"; 
            echo $(KERNEL_CONFIG_OVERRIDE) >> $(KERNEL_OUT)/.config; 
            $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) oldconfig; fi

kerneltags: $(KERNEL_OUT) $(KERNEL_CONFIG)
    $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) tags

kernelconfig: $(KERNEL_OUT) $(KERNEL_CONFIG)
    env KCONFIG_NOTIMESTAMP=true 
         $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) menuconfig
    env KCONFIG_NOTIMESTAMP=true 
         $(MAKE) -C kernel O=../$(KERNEL_OUT) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(KERNEL_CROSS_COMPILE) savedefconfig
    cp $(KERNEL_OUT)/defconfig kernel/arch/$(KERNEL_ARCH)/configs/$(KERNEL_DEFCONFIG)

endif
endif

    3、在device/mycompany/myproduct/中添加配置文件AndroidBoard.mk

    这个AndroidBoard.mk文件会被build/target/board/Android.mk包含。
    内容如下：
    TARGET_KERNEL_ARCH := arm64
TARGET_KERNEL_CROSS_COMPILE_PREFIX := aarch64-linux-android-
TARGET_USES_UNCOMPRESSED_KERNEL := true

KERNEL_DEFCONFIG := defconfig

include kernel/AndroidKernel.mk

$(INSTALLED_KERNEL_TARGET): $(TARGET_PREBUILT_KERNEL) | $(ACP)
    $(transform-prebuilt-to-target)

    4、修改device/mycompany/myproduct/BoardConfig.mk

    将TARGET_NO_KERNEL的值修改为false。

    5、编译

    . build/envsetup.sh
    lunch 24
    make bootimage

    6、添加kernelclean目标

    在进行clean的时候，没有必要include那些Android.mk，可以加快执行速度，在build/core/main.mk中提供了一个变量dont_bother_goals，其中的目标在编译时会略过加载Android.mk。
    修改build/core/main.mk：
    diff --git a/core/main.mk b/core/main.mk
index a612f835d..e333a17d5 100644
--- a/core/main.mk
+++ b/core/main.mk
@@ -87,6 +87,8 @@ dont_bother_goals := clean clobber dataclean installclean 
     recoveryimage-nodeps 
     product-graph dump-products
 
+dont_bother_goals += kernel-clean
+
 ifneq ($(filter $(dont_bother_goals), $(MAKECMDGOALS)),)
 dont_bother := true
 endif
@@ -1115,6 +1117,11 @@ clean:
        @rm -rf $(OUT_DIR)/*
        @echo "Entire build directory removed."
 
+.PHONY: kernel-clean
+kernel-clean:
+       @echo "Cleaning kernel..."
+       @rm -rf $(PRODUCT_OUT)/obj/KERNEL_OBJ/
+
 .PHONY: clobber
 clobber: clean
     
    测试
    pengdonglin@pengdonglin-dell:~/Android7_1$ make kernel-clean
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
TARGET_PRODUCT=myproduct
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a15
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.15.0-50-generic-x86_64-with-Ubuntu-18.04-bionic
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=N2G48H
OUT_DIR=out
============================================
Running kati to generate build-myproduct-kernel-clean.ninja...
No need to regenerate ninja file
Starting build with ninja
ninja: Entering directory `.'
[100% 1/1] Cleaning kernel...

#### make completed successfully (2 seconds) ####

    三、将U-Boot代码集成到Android编译系统中

    1、将u-boot-2018.09拷贝到bootable下，并重命名为u-boot

    2、在u-boot下添加AndroidU-boot.mk

    U-BOOT_TARGET := $(strip $(INSTALLED_U-BOOT_TARGET))
ifeq ($(U-BOOT_TARGET),)
INSTALLED_U-BOOT_TARGET := $(PRODUCT_OUT)/u-boot.bin
endif

TARGET_U-BOOT_ARCH := $(strip $(TARGET_U-BOOT_ARCH))

TARGET_U-BOOT_CROSS_COMPILE_PREFIX := $(strip $(TARGET_U-BOOT_CROSS_COMPILE_PREFIX))

U-BOOT_DEFCONFIG := $(strip $(U-BOOT_DEFCONFIG))
U-BOOT_OUT := $(TARGET_OUT_INTERMEDIATES)/U-BOOT_OBJ
U-BOOT_CONFIG := $(U-BOOT_OUT)/.config

TARGET_PREBUILT_INT_U-BOOT := $(U-BOOT_OUT)/u-boot.bin

TARGET_PREBUILT_U-BOOT := $(TARGET_PREBUILT_INT_U-BOOT)

$(U-BOOT_OUT):
    mkdir -p $(U-BOOT_OUT)

$(U-BOOT_CONFIG): $(U-BOOT_OUT)
    $(MAKE) -C bootable/u-boot O=../../$(U-BOOT_OUT) ARCH=$(TARGET_U-BOOT_ARCH) CROSS_COMPILE=$(TARGET_U-BOOT_CROSS_COMPILE_PREFIX) $(U-BOOT_DEFCONFIG)

$(TARGET_PREBUILT_INT_U-BOOT): $(U-BOOT_OUT) $(U-BOOT_CONFIG)
    $(hide) echo "Building u-boot..."
    $(MAKE) -C bootable/u-boot O=../../$(U-BOOT_OUT) ARCH=$(TARGET_U-BOOT_ARCH) CROSS_COMPILE=$(TARGET_U-BOOT_CROSS_COMPILE_PREFIX)

    3、修改device/mycompany/myproduct/AndroidBoard.mk

    追加如下内容:
    TARGET_U-BOOT_ARCH := arm
TARGET_U-BOOT_CROSS_COMPILE_PREFIX := aarch64-linux-android-
U-BOOT_DEFCONFIG := qemu_arm64_defconfig

include bootable/u-boot/AndroidU-boot.mk

$(INSTALLED_U-BOOT_TARGET): $(TARGET_PREBUILT_U-BOOT) | $(ACP)
    $(transform-prebuilt-to-target)

    4、修改device/mycompany/myproduct/BoardConfig.mk

    添加如下内容:
    TARGET_NO_U-BOOT := false

    5、修改build/core/Makefile

    diff --git a/core/Makefile b/core/Makefile
index d8b4ef89b..4b8f8f559 100644
--- a/core/Makefile
+++ b/core/Makefile
@@ -464,6 +464,11 @@ ifneq ($(strip $(TARGET_NO_KERNEL)),true)
 else
   INSTALLED_KERNEL_TARGET :=
 endif
+ifneq ($(strip $(TARGET_NO_U-BOOT)),true)
+  INSTALLED_U-BOOT_TARGET := $(PRODUCT_OUT)/u-boot.bin
+else
+  INSTALLED_U-BOOT_TARGET :=
+endif
 
 # -----------------------------------------------------------------
 # the ramdisk

    6、修改build/core/main.mk

    diff --git a/core/main.mk b/core/main.mk
index a612f835d..bac8ef18d 100644
--- a/core/main.mk
+++ b/core/main.mk
@@ -87,6 +87,9 @@ dont_bother_goals := clean clobber dataclean installclean 
     recoveryimage-nodeps 
     product-graph dump-products
 
+dont_bother_goals += u-boot-clean
+dont_bother_goals += kernel-clean
+
 ifneq ($(filter $(dont_bother_goals), $(MAKECMDGOALS)),)
 dont_bother := true
 endif
@@ -907,6 +910,9 @@ endif
 .PHONY: ramdisk
 ramdisk: $(INSTALLED_RAMDISK_TARGET)
 
+.PHONY: u-boot
+u-boot: $(INSTALLED_U-BOOT_TARGET)
+
 .PHONY: systemtarball
 systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET)
 
@@ -1115,6 +1121,16 @@ clean:
        @rm -rf $(OUT_DIR)/*
        @echo "Entire build directory removed."
 
+.PHONY: u-boot-clean
+u-boot-clean:
+       @echo "Cleaning u-boot..."
+       @rm -rf $(PRODUCT_OUT)/obj/U-BOOT_OBJ/
+
+.PHONY: kernel-clean
+kernel-clean:
+       @echo "Cleaning kernel..."
+       @rm -rf $(PRODUCT_OUT)/obj/KERNEL_OBJ/
+
 .PHONY: clobber
 clobber: clean

    7、测试

    . build/envsetup.sh
    lunch 24
    make u-boot
    OBJCOPY examples/standalone/hello_world.srec
  OBJCOPY examples/standalone/hello_world.bin
  LD      u-boot
  OBJCOPY u-boot.srec
  OBJCOPY u-boot-nodtb.bin
  SYM     u-boot.sym
start=$(aarch64-linux-android-nm u-boot | grep __rel_dyn_start | cut -f 1 -d ' '); end=$(aarch64-linux-android-nm u-boot | grep __rel_dyn_end | cut -f 1 -d ' '); tools/relocate-rela u-boot-nodtb.bin 0x00000000 $start $end
  COPY    u-boot.bin
  CFGCHK  u-boot.cfg
make[1]: Leaving directory '/home/pengdonglin/Android7_1/out/target/product/myproduct/obj/U-BOOT_OBJ'
make: Leaving directory '/home/pengdonglin/Android7_1/bootable/u-boot'
[100% 4/4] target Prebuilt:  (out/target/product/myproduct/u-boot.bin)
     
    make u-boot-clean
    pengdonglin@pengdonglin-dell:~/Android7_1$ make u-boot-clean
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
TARGET_PRODUCT=myproduct
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a15
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.15.0-50-generic-x86_64-with-Ubuntu-18.04-bionic
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=N2G48H
OUT_DIR=out
============================================
Running kati to generate build-myproduct-u-boot-clean.ninja...
No need to regenerate ninja file
Starting build with ninja
ninja: Entering directory `.'
[100% 1/1] Cleaning u-boot...

#### make completed successfully  ####
    完。
  • 相关阅读:
    SVN常用命令
    在windows下Oracle10g中创建数据库（一）
    PowerDesigner12.5 常用功能设置
    Windows下oracle xe 10g 手工创建数据库（二）
    Linux环境手动创建oracle10g数据库实践
    SQLSERVER数据库 'XX' 的事务日志已满。若要查明无法重用日志中的空间的原因，请参......
    SP中执行动态组串的sql
    手机号码吉凶测试原理计算公式
    SQL 2005 中 ROW_NUMBER 用法
    IIS 问题汇总
  • 原文地址：https://www.cnblogs.com/pengdonglin137/p/10888727.html
Copyright © 2011-2022 走看看