作者：彭东林
邮箱：pengdonglin137@163.com
QQ：405728433
环境
主机： ubuntu14.04 64bit
开发板： qemu + vexpress-a9 （参考： http://www.cnblogs.com/pengdonglin137/p/6442583.html）
工具链： arm-none-linux-gnueabi-gcc (gcc version 4.8.3 20140320)
Python版本： Python-2.7.13
参考
http://www.41443.com/HTML/Python/20151105/414154.html
http://www.cnblogs.com/tolimit/p/4519838.html?utm_source=tuicool&utm_medium=referral
正文
1、下载解压python源码
到https://www.python.org/downloads/下载最新的python2系列的软件，这里我用的是Python-2.7.13
1 #解压 2 tar -xf Python-2.7.13.tar.xz 3 4 #创建python2_7_13_for_x86_64 5 mkdir python2_7_13_for_x86_64 6 7 #创建python2_7_13_for_arm 8 mkdir python2_7_13_for_arm
2、编译x86_64版本的python软件
我把编译过程写成了脚本， 进入python2_7_13_for_x86_64/目录，然后执行如下脚本：
-
配置 mk1_conf.sh
1 #!/bin/bash 2 3 ../Python-2.7.13/configure --prefix=`pwd`
-
编译mk2_make.sh
1 #!/bin/bash 2 3 make -j4
-
安装 mk3_install.sh
1 #!/bin/bash 2 3 make install
3、交叉编译
交叉编译的第一步是为python源码打上交叉编译用的patch：Python-2.7.13-compile.patch.tar.gz
1 cd Python-2.7.13/ 2 patch -p1 < ../python2_7_13_for_arm/Python-2.7.13-xcompile.patch
我也把编译过程放到脚本，也分为三个：
-
配置 mk1_conf.sh
1 #!/bin/bash 2 export PATH=/home/pengdonglin/src/qemu/aarch32/arm-2014.05/bin:$PATH 3 ../Python-2.7.13/configure --prefix=`pwd` 4 --host=arm-none-linux-gnueabi 5 --build=x86_64-linux-gnu 6 --enable-ipv6 7 --enable-shared 8 ac_cv_file__dev_ptmx="yes" 9 ac_cv_file__dev_ptc="no"
-
编译 mk2_make.sh
1 #!/bin/bash 2 export PATH=/home/pengdonglin/src/qemu/aarch32/arm-2014.05/bin:$PATH 3 make HOSTPYTHON=../python2_7_13_for_x86_64/python 4 HOSTPGEN=../python2_7_13_for_x86_64/Parser/pgen 5 BLDSHARED="arm-none-linux-gnueabi-gcc -shared" 6 CROSS_COMPILE=arm-none-linux-gnueabi- 7 CROSS_COMPILE_TARGET=yes 8 HOSTARCH=arm-none-linux-gnueabi 9 BUILDARCH=x86_64-linux-gnu 10 -j4
-
安装 mk3_install.sh
1 #!/bin/bash 2 export PATH=/home/pengdonglin/src/qemu/aarch32/arm-2014.05/bin:$PATH 3 make install HOSTPYTHON=../python2_7_13_for_x86_64/python 4 BLDSHARED="arm-none-linux-gnueabi-gcc -shared" 5 CROSS_COMPILE=arm-none-linux-gnueabi- 6 CROSS_COMPILE_TARGET=yes 7 prefix=`pwd`
4、重新制作ramdisk镜像
参考博文：用Qemu搭建aarch32学习环境
修改mk_ramdisk.sh如下：
1 #!/bin/bash 2 sudo rm -rf rootfs 3 sudo rm -rf tmpfs 4 sudo rm -rf ramdisk* 5 sudo mkdir rootfs 6 sudo cp ../busybox-1.24.2/_install/* rootfs/ -raf 7 sudo mkdir -p rootfs/proc/ 8 sudo mkdir -p rootfs/sys/ 9 sudo mkdir -p rootfs/tmp/ 10 sudo mkdir -p rootfs/root/ 11 sudo mkdir -p rootfs/var/ 12 sudo mkdir -p rootfs/mnt/ 13 sudo cp etc rootfs/ -arf 14 sudo cp -arf ../arm-2014.05/arm-none-linux-gnueabi/libc/lib rootfs/ 15 sudo rm -rf rootfs/lib/*.a 16 sudo /home/pengdonglin/src/qemu/aarch32/arm-2014.05/bin/arm-none-linux-gnueabi-strip rootfs/lib/* 17 # 拷贝python相关的文件到根文件系统中 18 sudo mkdir -p rootfs/usr 19 pushd rootfs/usr 20 sudo cp -raf /home/pengdonglin/src/qemu/python_cross_compile/python2_7_13_for_arm/lib . 21 sudo cp -raf /home/pengdonglin/src/qemu/python_cross_compile/python2_7_13_for_arm/include . 22 sudo cp -raf /home/pengdonglin/src/qemu/python_cross_compile/python2_7_13_for_arm/bin . 23 sudo cp -raf /home/pengdonglin/src/qemu/python_cross_compile/python2_7_13_for_arm/share . 24 sudo /home/pengdonglin/src/qemu/aarch32/arm-2014.05/bin/arm-none-linux-gnueabi-strip lib/python* 25 popd 26 sudo mkdir -p rootfs/dev/ 27 sudo mknod rootfs/dev/tty1 c 4 1 28 sudo mknod rootfs/dev/tty2 c 4 2 29 sudo mknod rootfs/dev/tty3 c 4 3 30 sudo mknod rootfs/dev/tty4 c 4 4 31 sudo mknod rootfs/dev/console c 5 1 32 sudo mknod rootfs/dev/null c 1 3 33 sudo mkdir -p rootfs/lib/modules/4.10.0+ 34 sudo mkdir -p rootfs/tools 35 sudo cp ./other_tools/* rootfs/tools 36 # 将ramdisk的大小扩展为100MB 37 sudo dd if=/dev/zero of=ramdisk bs=1M count=100 38 sudo mkfs.ext4 -F ramdisk 39 sudo mkdir -p tmpfs 40 sudo mount -t ext4 ramdisk ./tmpfs/ -o loop 41 sudo cp -raf rootfs/* tmpfs/ 42 sudo umount tmpfs 43 sudo gzip --best -c ramdisk > ramdisk.gz 44 sudo mkimage -n "ramdisk" -A arm -O linux -T ramdisk -C gzip -d ramdisk.gz ramdisk.img
这里需要注意：
1、将刚才交叉编译python所得的文件拷贝到rootfs/usr下面： bin、lib、include和share
2、由于Python的lib目录占用了很大空间，有70MB左右，所以这里我们把ramdisk的大小设置为100MB
3、此外，qemu-system-arm运行的，可以给-m设置较大的物理内存，这里我设置的是1GB
5、修改kernel配置
修改ramdisk的大小设置， 这里我设置的是100MB：
1 Device Drivers ---> 2 3 [*] Block devices ---> 4 5 (102400) Default RAM disk size (kbytes)
6、测试
制作好ramdisk以及编译出新的kernel后，运行系统：
1 sudo qemu-system-arm 2 -M vexpress-a9 3 -m 1024M 4 -smp 2 5 -kernel ./linux-4.10/out_aarch32/arch/arm/boot/zImage 6 -nographic 7 -append "root=/dev/ram0 rw rootfstype=ext4 console=ttyAMA0 init=/linuxrc ignore_loglevel" 8 -initrd ./rootfs/ramdisk.img 9 -net nic,vlan=0 -net tap,vlan=0,ifname=tap0 10 -dtb ./linux-4.10/out_aarch32/arch/arm/boot/dts/vexpress-v2p-ca9.dtb
下面是启动log：
1 $./run.sh 2 sudo tunctl -u root -t tap0 3 TUNSETIFF: Device or resource busy 4 sudo ifconfig tap0 0.0.0.0 promisc up 5 sudo brctl addif br0 tap0 6 brctl show 7 bridge name bridge id STP enabled interfaces 8 br0 8000.480fcf3ace87 no eth0 9 tap0 10 docker0 8000.02423772cc85 no 11 [ 0.000000] Booting Linux on physical CPU 0x0 12 [ 0.000000] Linux version 4.10.0+ (pengdonglin@pengdonglin-HP) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-29) ) #10 SMP Mon Mar 20 11:31:00 CST 2017 13 [ 0.000000] CPU: ARMv7 Processor [410fc090] revision 0 (ARMv7), cr=10c5387d 14 [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache 15 [ 0.000000] OF: fdt:Machine model: V2P-CA9 16 [ 0.000000] debug: ignoring loglevel setting. 17 [ 0.000000] Memory policy: Data cache writealloc 18 [ 0.000000] On node 0 totalpages: 262144 19 [ 0.000000] free_area_init_node: node 0, pgdat c0a637c0, node_mem_map ef7fa000 20 [ 0.000000] Normal zone: 1536 pages used for memmap 21 [ 0.000000] Normal zone: 0 pages reserved 22 [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 23 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 24 [ 0.000000] percpu: Embedded 14 pages/cpu @ef7b5000 s27648 r8192 d21504 u57344 25 [ 0.000000] pcpu-alloc: s27648 r8192 d21504 u57344 alloc=14*4096 26 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 27 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260608 28 [ 0.000000] Kernel command line: root=/dev/ram0 rw rootfstype=ext4 console=ttyAMA0 init=/linuxrc ignore_loglevel 29 [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes 30 [ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes 31 [ 0.000000] log_buf_len min size: 16384 bytes 32 [ 0.000000] log_buf_len: 32768 bytes 33 [ 0.000000] early log buf free: 14860(90%) 34 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) 35 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) 36 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) 37 [ 0.000000] Memory: 1007212K/1048576K available (6144K kernel code, 453K rwdata, 1440K rodata, 1024K init, 191K bss, 41364K reserved, 0K cma-reserved, 262144K highmem) 38 [ 0.000000] Virtual kernel memory layout: 39 [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) 40 [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) 41 [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) 42 [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) 43 [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) 44 [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) 45 [ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB) 46 [ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB) 47 [ 0.000000] .data : 0xc0a00000 - 0xc0a71784 ( 454 kB) 48 [ 0.000000] .bss : 0xc0a73000 - 0xc0aa2c4c ( 192 kB) 49 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 50 [ 0.000000] Hierarchical RCU implementation. 51 [ 0.000000] Build-time adjustment of leaf fanout to 32. 52 [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. 53 [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 54 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 55 [ 0.000000] L2C: platform modifies aux control register: 0x02020000 -> 0x02420000 56 [ 0.000000] L2C: DT/platform modifies aux control register: 0x02020000 -> 0x02420000 57 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 58 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 59 [ 0.000000] L2C-310 dynamic clock gating disabled, standby mode disabled 60 [ 0.000000] L2C-310 cache controller enabled, 8 ways, 128 kB 61 [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x46420001 62 [ 0.000000] smp_twd: clock not found -2 63 [ 0.000206] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns 64 [ 0.002899] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns 65 [ 0.003447] Failed to initialize '/smb@04000000/motherboard/iofpga@7,00000000/timer@12000': -22 66 [ 0.006792] Console: colour dummy device 80x30 67 [ 0.007168] Calibrating local timer... 94.56MHz. 68 [ 0.063191] Calibrating delay loop... 869.99 BogoMIPS (lpj=4349952) 69 [ 0.148244] pid_max: default: 32768 minimum: 301 70 [ 0.149235] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) 71 [ 0.149279] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) 72 [ 0.158258] CPU: Testing write buffer coherency: ok 73 [ 0.158718] ftrace: allocating 20771 entries in 61 pages 74 [ 0.580570] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 75 [ 0.584830] Setting up static identity map for 0x60100000 - 0x60100058 76 [ 0.591663] smp: Bringing up secondary CPUs ... 77 [ 0.677810] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 78 [ 1.623456] CPU2: failed to boot: -38 79 [ 2.569146] CPU3: failed to boot: -38 80 [ 2.569341] smp: Brought up 1 node, 2 CPUs 81 [ 2.569417] SMP: Total of 2 processors activated (1739.98 BogoMIPS). 82 [ 2.569500] CPU: All CPU(s) started in SVC mode. 83 [ 2.599822] devtmpfs: initialized 84 [ 2.617472] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 0 85 [ 2.631508] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 86 [ 2.632028] futex hash table entries: 1024 (order: 4, 65536 bytes) 87 [ 2.671232] NET: Registered protocol family 16 88 [ 2.675992] DMA: preallocated 256 KiB pool for atomic coherent allocations 89 [ 2.853307] cpuidle: using governor ladder 90 [ 2.853708] hw-breakpoint: debug architecture 0x4 unsupported. 91 [ 2.854172] Serial: AMBA PL011 UART driver 92 [ 2.860429] OF: amba_device_add() failed (-19) for /memory-controller@100e0000 93 [ 2.862876] OF: amba_device_add() failed (-19) for /memory-controller@100e1000 94 [ 2.863329] OF: amba_device_add() failed (-19) for /watchdog@100e5000 95 [ 2.865275] irq: type mismatch, failed to map hwirq-75 for /interrupt-controller@1e001000! 96 [ 2.877129] 10009000.uart: ttyAMA0 at MMIO 0x10009000 (irq = 38, base_baud = 0) is a PL011 rev1 97 [ 2.889012] console [ttyAMA0] enabled 98 [ 2.893012] 1000a000.uart: ttyAMA1 at MMIO 0x1000a000 (irq = 39, base_baud = 0) is a PL011 rev1 99 [ 2.895140] 1000b000.uart: ttyAMA2 at MMIO 0x1000b000 (irq = 40, base_baud = 0) is a PL011 rev1 100 [ 2.896620] 1000c000.uart: ttyAMA3 at MMIO 0x1000c000 (irq = 41, base_baud = 0) is a PL011 rev1 101 [ 2.897695] OF: amba_device_add() failed (-19) for /smb@04000000/motherboard/iofpga@7,00000000/wdt@0f000 102 [ 2.979213] SCSI subsystem initialized 103 [ 2.980067] libata version 3.00 loaded. 104 [ 2.981102] usbcore: registered new interface driver usbfs 105 [ 2.981415] usbcore: registered new interface driver hub 106 [ 2.981690] usbcore: registered new device driver usb 107 [ 2.988362] Advanced Linux Sound Architecture Driver Initialized. 108 [ 3.011566] clocksource: Switched to clocksource arm,sp804 109 [ 3.159190] NET: Registered protocol family 2 110 [ 3.164055] TCP established hash table entries: 8192 (order: 3, 32768 bytes) 111 [ 3.164307] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) 112 [ 3.164553] TCP: Hash tables configured (established 8192 bind 8192) 113 [ 3.166386] UDP hash table entries: 512 (order: 2, 16384 bytes) 114 [ 3.166801] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 115 [ 3.167985] NET: Registered protocol family 1 116 [ 3.171676] RPC: Registered named UNIX socket transport module. 117 [ 3.171948] RPC: Registered udp transport module. 118 [ 3.172020] RPC: Registered tcp transport module. 119 [ 3.172115] RPC: Registered tcp NFSv4.1 backchannel transport module. 120 [ 3.177825] Trying to unpack rootfs image as initramfs... 121 [ 3.184610] rootfs image is not initramfs (no cpio magic); looks like an initrd 122 [ 3.416590] Freeing initrd memory: 22120K 123 [ 3.420686] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 1 counters available 124 [ 3.430377] workingset: timestamp_bits=30 max_order=18 bucket_order=0 125 [ 3.457911] squashfs: version 4.0 (2009/01/31) Phillip Lougher 126 [ 3.463134] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. 127 [ 3.464581] 9p: Installing v9fs 9p2000 file system support 128 [ 3.470989] bounce: pool size: 64 pages 129 [ 3.471215] io scheduler noop registered (default) 130 [ 3.475569] clcd-pl11x 10020000.clcd: PL111 designer 41 rev2 at 0x10020000 131 [ 3.483346] clcd-pl11x 10020000.clcd: /clcd@10020000 hardware, 1024x768@59 display 132 [ 3.602322] Console: switching to colour frame buffer device 128x48 133 [ 3.617254] clcd-pl11x 1001f000.clcd: PL111 designer 41 rev2 at 0x1001f000 134 [ 3.619006] clcd-pl11x 1001f000.clcd: /smb@04000000/motherboard/iofpga@7,00000000/clcd@1f000 hardware, 640x480@59 display 135 [ 3.984710] brd: module loaded 136 [ 3.991353] 40000000.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 137 [ 3.991791] Intel/Sharp Extended Query Table at 0x0031 138 [ 3.992447] Using buffer write method 139 [ 3.992792] erase region 0: offset=0x0,size=0x80000,blocks=128 140 [ 3.994929] 40000000.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 141 [ 3.995125] Intel/Sharp Extended Query Table at 0x0031 142 [ 3.995600] Using buffer write method 143 [ 3.995708] erase region 0: offset=0x0,size=0x80000,blocks=128 144 [ 3.995876] Concatenating MTD devices: 145 [ 3.995986] (0): "40000000.flash" 146 [ 3.996076] (1): "40000000.flash" 147 [ 3.996153] into device "40000000.flash" 148 [ 4.011057] libphy: Fixed MDIO Bus: probed 149 [ 4.068484] libphy: smsc911x-mdio: probed 150 [ 4.071230] smsc911x 4e000000.ethernet eth0: MAC Address: 52:54:00:12:34:56 151 [ 4.179313] isp1760 4f000000.usb: bus 32, oc: digital 152 [ 4.181070] isp1760 4f000000.usb: NXP ISP1760 USB Host Controller 153 [ 4.181548] isp1760 4f000000.usb: new USB bus registered, assigned bus number 1 154 [ 4.182418] isp1760 4f000000.usb: Scratch test failed. 155 [ 4.182705] isp1760 4f000000.usb: can't setup: -19 156 [ 4.183183] isp1760 4f000000.usb: USB bus 1 deregistered 157 [ 4.185634] usbcore: registered new interface driver usb-storage 158 [ 4.192487] mousedev: PS/2 mouse device common for all mice 159 [ 4.201100] rtc-pl031 10017000.rtc: rtc core: registered pl031 as rtc0 160 [ 4.216680] mmci-pl18x 10005000.mmci: Got CD GPIO 161 [ 4.216979] mmci-pl18x 10005000.mmci: Got WP GPIO 162 [ 4.218707] mmci-pl18x 10005000.mmci: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 34,35 (pio) 163 [ 4.272360] ledtrig-cpu: registered to indicate activity on CPUs 164 [ 4.279939] usbcore: registered new interface driver usbhid 165 [ 4.280124] usbhid: USB HID core driver 166 [ 4.321426] input: AT Raw Set 2 keyboard as /devices/platform/smb@04000000/smb@04000000:motherboard/smb@04000000:motherboard:iofpga@7,00000000/10006000.kmi/serio0/input/input0 167 [ 4.326835] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 33 168 [ 4.326992] aaci-pl041 10004000.aaci: FIFO 512 entries 169 [ 4.327894] oprofile: using arm/armv7-ca9 170 [ 4.331342] NET: Registered protocol family 17 171 [ 4.331955] 9pnet: Installing 9P2000 support 172 [ 4.332582] Registering SWP/SWPB emulation handler 173 [ 4.348427] rtc-pl031 10017000.rtc: setting system clock to 2017-03-20 03:31:48 UTC (1489980708) 174 [ 4.349574] ALSA device list: 175 [ 4.349669] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 33 176 [ 4.999294] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/smb@04000000/smb@04000000:motherboard/smb@04000000:motherboard:iofpga@7,00000000/10007000.kmi/serio1/input/input2 177 [ 5.014045] RAMDISK: gzip image found at block 0 178 [ 11.157823] EXT4-fs (ram0): mounted filesystem with ordered data mode. Opts: (null) 179 [ 11.158866] VFS: Mounted root (ext4 filesystem) on device 1:0. 180 [ 11.189561] Freeing unused kernel memory: 1024K 181 [ 12.209586] Generic PHY 4e000000.etherne:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=4e000000.etherne:01, irq=-1) 182 [ 12.236870] smsc911x 4e000000.ethernet eth0: SMSC911x/921x identified at 0xf1420000, IRQ: 31 183 Please press Enter to activate this console. 184 [root@vexpress ]# 185 [root@vexpress ]# [ 31.810292] random: fast init done 186 [root@vexpress ]# 187 [root@vexpress ]# 188 [root@vexpress ]# python 189 Python 2.7.13 (default, Mar 20 2017, 11:20:45) 190 [GCC 4.8.3 20140320 (prerelease)] on linux2 191 Type "help", "copyright", "credits" or "license" for more information. 192 >>> for i in range(100): print "hello world" 193 ... 194 hello world 195 hello world 196 hello world 197 hello world 198 hello world 199 hello world 200 hello world 201 hello world 202 hello world 203 hello world 204 hello world 205 hello world 206 hello world 207 hello world 208 hello world 209 hello world 210 hello world 211 hello world 212 hello world 213 hello world 214 hello world 215 hello world 216 hello world 217 hello world 218 hello world 219 hello world 220 hello world 221 hello world 222 hello world 223 hello world 224 hello world 225 hello world 226 hello world 227 hello world 228 hello world 229 hello world 230 hello world 231 hello world 232 hello world 233 hello world 234 hello world 235 hello world 236 hello world 237 hello world 238 hello world 239 hello world 240 hello world 241 hello world 242 hello world 243 hello world 244 hello world 245 hello world 246 hello world 247 hello world 248 hello world 249 hello world 250 hello world 251 hello world 252 hello world 253 hello world 254 hello world 255 hello world 256 hello world 257 hello world 258 hello world 259 hello world 260 hello world 261 hello world 262 hello world 263 hello world 264 hello world 265 hello world 266 hello world 267 hello world 268 hello world 269 hello world 270 hello world 271 hello world 272 hello world 273 hello world 274 hello world 275 hello world 276 hello world 277 hello world 278 hello world 279 hello world 280 hello world 281 hello world 282 hello world 283 hello world 284 hello world 285 hello world 286 hello world 287 hello world 288 hello world 289 hello world 290 hello world 291 hello world 292 hello world 293 hello world 294 >>> [ 236.572628] random: crng init done
完。