SaltStack基础管理平台
Salt-master启动时会启动两个端口：
4505：salt的消息发布专用端口
4506：客户端与服务端通讯的端口
SaltStack离线安装：
1.需要安装 yum install yum-downloadonly（用于下载离线文件，下载好的离线文件放在指定目录里面，可以用于非联网的服务器的安装）
2.wget https://repo.saltstack.com/yum/redhat/salt-repo-2015.8-2.el5.noarch.rpm 下载这个包，并用rpm命令安装
3.wget --no-check-certificate -O install_salt.sh https://bootstrap.saltstack.com|sh 通过执行这条命令，可以在/etc/yum.repos.d/目录下面生成三个文件，分别为
epel.repo
epel-testing.repo
salt-2015.8.repo
3.执行yum clean expire-cache
4.执行yum install -y --downloadonly --downloaddir=/root/salt salt-minion，将salt-minion的所需文件都下载到相应的目录。
注意：在执行过程中有报错，需要先安装rpm -ivh yum-util*，rpm -ivh gmp*共三个包（前面一个，后面两个）
5.将salt-minion文件下载下来
[root@python salt]# yum install -y --downloadonly --downloaddir=/root/salt-minion salt-minion
Loaded plugins: downloadonly, rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package salt-minion.noarch 0:2015.8.8-2.el5 set to be updated
--> Processing Dependency: salt = 2015.8.8-2.el5 for package: salt-minion
--> Processing Dependency: /usr/bin/python2.6 for package: salt-minion
--> Running transaction check
---> Package python26.i386 0:2.6.8-3.el5 set to be updated
--> Processing Dependency: libffi for package: python26
--> Processing Dependency: libpython2.6.so.1.0 for package: python26
--> Processing Dependency: libffi.so.5 for package: python26
--> Processing Dependency: python26-libs for package: python26
---> Package salt.noarch 0:2015.8.8-2.el5 set to be updated
--> Processing Dependency: python26-msgpack > 0.3 for package: salt
--> Processing Dependency: python26-requests >= 1.0.0 for package: salt
--> Processing Dependency: python26-crypto >= 2.6.1 for package: salt
--> Processing Dependency: python26-tornado >= 4.2.1 for package: salt
--> Processing Dependency: python26-zmq for package: salt
--> Processing Dependency: python26-jinja2 for package: salt
--> Processing Dependency: python26-PyYAML for package: salt
--> Processing Dependency: python26-six for package: salt
--> Running transaction check
---> Package libffi.i386 0:3.0.5-1.el5 set to be updated
---> Package python26-PyYAML.i386 0:3.08-4.el5 set to be updated
--> Processing Dependency: libyaml-0.so.1 for package: python26-PyYAML
---> Package python26-crypto.i386 0:2.6.1-2.el5 set to be updated
---> Package python26-jinja2.noarch 0:2.5.5-6.el5 set to be updated
--> Processing Dependency: python26-babel >= 0.8 for package: python26-jinja2
--> Processing Dependency: python26-distribute for package: python26-jinja2
--> Processing Dependency: python26-markupsafe for package: python26-jinja2
---> Package python26-libs.i386 0:2.6.8-3.el5 set to be updated
---> Package python26-msgpack.i386 0:0.4.5-1.el5 set to be updated
---> Package python26-requests.noarch 0:1.1.0-5.el5 set to be updated
--> Processing Dependency: python26-urllib3 for package: python26-requests
--> Processing Dependency: python26-ordereddict for package: python26-requests
--> Processing Dependency: python26-chardet for package: python26-requests
---> Package python26-six.noarch 0:1.7.3-3.el5 set to be updated
---> Package python26-tornado.i386 0:4.2.1-1.el5 set to be updated
--> Processing Dependency: python26-backports-ssl_match_hostname for package: python26-tornado
--> Processing Dependency: python26-pycurl for package: python26-tornado
---> Package python26-zmq.i386 0:14.5.0-2.el5 set to be updated
--> Processing Dependency: libzmq.so.4 for package: python26-zmq
--> Running transaction check
---> Package libyaml.i386 0:0.1.2-8.el5 set to be updated
---> Package python26-babel.noarch 0:0.9.5-2.el5 set to be updated
---> Package python26-backports-ssl_match_hostname.noarch 0:3.4.0.2-5.el5 set to be updated
--> Processing Dependency: python26-backports for package: python26-backports-ssl_match_hostname
---> Package python26-chardet.noarch 0:2.0.1-2.el5 set to be updated
---> Package python26-distribute.noarch 0:0.6.10-4.el5 set to be updated
---> Package python26-markupsafe.i386 0:0.11-3.el5 set to be updated
---> Package python26-ordereddict.noarch 0:1.1-3.el5 set to be updated
---> Package python26-pycurl.i386 0:7.15.5.1-9.el5 set to be updated
---> Package python26-urllib3.noarch 0:1.5-8.el5 set to be updated
---> Package zeromq.i386 0:4.0.5-4.el5 set to be updated
--> Running transaction check
---> Package python26-backports.i386 0:1.0-5.el5 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
=======================================================================================================================
Package Arch Version Repository Size
=======================================================================================================================
Installing:
salt-minion noarch 2015.8.8-2.el5 salt-2015.8 30 k
Installing for dependencies:
libffi i386 3.0.5-1.el5 epel 21 k
libyaml i386 0.1.2-8.el5 epel 55 k
python26 i386 2.6.8-3.el5 salt-2015.8 6.5 M
python26-PyYAML i386 3.08-4.el5 epel 166 k
python26-babel noarch 0.9.5-2.el5 epel 1.8 M
python26-backports i386 1.0-5.el5 epel 3.7 k
python26-backports-ssl_match_hostname noarch 3.4.0.2-5.el5 epel 11 k
python26-chardet noarch 2.0.1-2.el5 epel 544 k
python26-crypto i386 2.6.1-2.el5 salt-2015.8 659 k
python26-distribute noarch 0.6.10-4.el5 salt-2015.8 511 k
python26-jinja2 noarch 2.5.5-6.el5 salt-2015.8 793 k
python26-libs i386 2.6.8-3.el5 salt-2015.8 671 k
python26-markupsafe i386 0.11-3.el5 epel 24 k
python26-msgpack i386 0.4.5-1.el5 salt-2015.8 83 k
python26-ordereddict noarch 1.1-3.el5 epel 6.6 k
python26-pycurl i386 7.15.5.1-9.el5 epel 72 k
python26-requests noarch 1.1.0-5.el5 epel 79 k
python26-six noarch 1.7.3-3.el5 epel 29 k
python26-tornado i386 4.2.1-1.el5 salt-2015.8 733 k
python26-urllib3 noarch 1.5-8.el5 epel 52 k
python26-zmq i386 14.5.0-2.el5 salt-2015.8 563 k
salt noarch 2015.8.8-2.el5 salt-2015.8 7.0 M
zeromq i386 4.0.5-4.el5 salt-2015.8 620 k
Transaction Summary
=======================================================================================================================
Install 24 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 21 M
Downloading Packages:
http://mirrors.opencas.cn/epel/5/i386/python26-backports-1.0-5.el5.i386.rpm: [Errno 4] IOError: <urlopen error (101, 'Network is unreachable')>
Trying other mirror.
(1/24): python26-backports-1.0-5.el5.i386.rpm | 3.7 kB 00:00
(2/24): python26-ordereddict-1.1-3.el5.noarch.rpm | 6.6 kB 00:00
(3/24): python26-backports-ssl_match_hostname-3.4.0.2-5.el5.noarch.rpm | 11 kB 00:00
(4/24): libffi-3.0.5-1.el5.i386.rpm | 21 kB 00:00
(5/24): python26-markupsafe-0.11-3.el5.i386.rpm | 24 kB 00:00
(6/24): python26-six-1.7.3-3.el5.noarch.rpm | 29 kB 00:00
(7/24): salt-minion-2015.8.8-2.el5.noarch.rpm | 30 kB 00:00
(8/24): python26-urllib3-1.5-8.el5.noarch.rpm | 52 kB 00:00
(9/24): libyaml-0.1.2-8.el5.i386.rpm | 55 kB 00:00
(10/24): python26-pycurl-7.15.5.1-9.el5.i386.rpm | 72 kB 00:00
(11/24): python26-requests-1.1.0-5.el5.noarch.rpm | 79 kB 00:00
(12/24): python26-msgpack-0.4.5-1.el5.i386.rpm | 83 kB 00:01
(13/24): python26-PyYAML-3.08-4.el5.i386.rpm | 166 kB 00:00
(14/24): python26-distribute-0.6.10-4.el5.noarch.rpm | 511 kB 00:18
(15/24): python26-chardet-2.0.1-2.el5.noarch.rpm | 544 kB 00:00
(16/24): python26-zmq-14.5.0-2.el5.i386.rpm | 563 kB 00:05
(17/24): zeromq-4.0.5-4.el5.i386.rpm | 620 kB 00:25
(18/24): python26-crypto-2.6.1-2.el5.i386.rpm | 659 kB 00:12
(19/24): python26-libs-2.6.8-3.el5.i386.rpm | 671 kB 00:13
(20/24): python26-tornado-4.2.1-1.el5.i386.rpm | 733 kB 00:06
(21/24): python26-jinja2-2.5.5-6.el5.noarch.rpm | 793 kB 00:20
(22/24): python26-babel-0.9.5-2.el5.noarch.rpm | 1.8 MB 00:02
(23/24): python26-2.6.8-3.el5.i386.rpm | 6.5 MB 00:44
(24/24): salt-2015.8.8-2.el5.noarch.rpm | 7.0 MB 02:33
-----------------------------------------------------------------------------------------------------------------------
Total 59 kB/s | 21 MB 06:00
exiting because --downloadonly specified
下载salt-master
[root@python salt-master]# yum install -y --downloadonly --downloaddir=/root/salt-master salt-master
Loaded plugins: downloadonly, rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package salt-master.noarch 0:2015.8.8-2.el5 set to be updated
--> Processing Dependency: salt = 2015.8.8-2.el5 for package: salt-master
--> Processing Dependency: /usr/bin/python2.6 for package: salt-master
--> Running transaction check
---> Package python26.i386 0:2.6.8-3.el5 set to be updated
--> Processing Dependency: libffi for package: python26
--> Processing Dependency: libpython2.6.so.1.0 for package: python26
--> Processing Dependency: libffi.so.5 for package: python26
--> Processing Dependency: python26-libs for package: python26
---> Package salt.noarch 0:2015.8.8-2.el5 set to be updated
--> Processing Dependency: python26-msgpack > 0.3 for package: salt
--> Processing Dependency: python26-requests >= 1.0.0 for package: salt
--> Processing Dependency: python26-crypto >= 2.6.1 for package: salt
--> Processing Dependency: python26-tornado >= 4.2.1 for package: salt
--> Processing Dependency: python26-zmq for package: salt
--> Processing Dependency: python26-jinja2 for package: salt
--> Processing Dependency: python26-PyYAML for package: salt
--> Processing Dependency: python26-six for package: salt
--> Running transaction check
---> Package libffi.i386 0:3.0.5-1.el5 set to be updated
---> Package python26-PyYAML.i386 0:3.08-4.el5 set to be updated
--> Processing Dependency: libyaml-0.so.1 for package: python26-PyYAML
---> Package python26-crypto.i386 0:2.6.1-2.el5 set to be updated
---> Package python26-jinja2.noarch 0:2.5.5-6.el5 set to be updated
--> Processing Dependency: python26-babel >= 0.8 for package: python26-jinja2
--> Processing Dependency: python26-distribute for package: python26-jinja2
--> Processing Dependency: python26-markupsafe for package: python26-jinja2
---> Package python26-libs.i386 0:2.6.8-3.el5 set to be updated
---> Package python26-msgpack.i386 0:0.4.5-1.el5 set to be updated
---> Package python26-requests.noarch 0:1.1.0-5.el5 set to be updated
--> Processing Dependency: python26-urllib3 for package: python26-requests
--> Processing Dependency: python26-ordereddict for package: python26-requests
--> Processing Dependency: python26-chardet for package: python26-requests
---> Package python26-six.noarch 0:1.7.3-3.el5 set to be updated
---> Package python26-tornado.i386 0:4.2.1-1.el5 set to be updated
--> Processing Dependency: python26-backports-ssl_match_hostname for package: python26-tornado
--> Processing Dependency: python26-pycurl for package: python26-tornado
---> Package python26-zmq.i386 0:14.5.0-2.el5 set to be updated
--> Processing Dependency: libzmq.so.4 for package: python26-zmq
--> Running transaction check
---> Package libyaml.i386 0:0.1.2-8.el5 set to be updated
---> Package python26-babel.noarch 0:0.9.5-2.el5 set to be updated
---> Package python26-backports-ssl_match_hostname.noarch 0:3.4.0.2-5.el5 set to be updated
--> Processing Dependency: python26-backports for package: python26-backports-ssl_match_hostname
---> Package python26-chardet.noarch 0:2.0.1-2.el5 set to be updated
---> Package python26-distribute.noarch 0:0.6.10-4.el5 set to be updated
---> Package python26-markupsafe.i386 0:0.11-3.el5 set to be updated
---> Package python26-ordereddict.noarch 0:1.1-3.el5 set to be updated
---> Package python26-pycurl.i386 0:7.15.5.1-9.el5 set to be updated
---> Package python26-urllib3.noarch 0:1.5-8.el5 set to be updated
---> Package zeromq.i386 0:4.0.5-4.el5 set to be updated
--> Running transaction check
---> Package python26-backports.i386 0:1.0-5.el5 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
=======================================================================================================================
Package Arch Version Repository Size
=======================================================================================================================
Installing:
salt-master noarch 2015.8.8-2.el5 salt-2015.8 1.2 M
Installing for dependencies:
libffi i386 3.0.5-1.el5 epel 21 k
libyaml i386 0.1.2-8.el5 epel 55 k
python26 i386 2.6.8-3.el5 salt-2015.8 6.5 M
python26-PyYAML i386 3.08-4.el5 epel 166 k
python26-babel noarch 0.9.5-2.el5 epel 1.8 M
python26-backports i386 1.0-5.el5 epel 3.7 k
python26-backports-ssl_match_hostname noarch 3.4.0.2-5.el5 epel 11 k
python26-chardet noarch 2.0.1-2.el5 epel 544 k
python26-crypto i386 2.6.1-2.el5 salt-2015.8 659 k
python26-distribute noarch 0.6.10-4.el5 salt-2015.8 511 k
python26-jinja2 noarch 2.5.5-6.el5 salt-2015.8 793 k
python26-libs i386 2.6.8-3.el5 salt-2015.8 671 k
python26-markupsafe i386 0.11-3.el5 epel 24 k
python26-msgpack i386 0.4.5-1.el5 salt-2015.8 83 k
python26-ordereddict noarch 1.1-3.el5 epel 6.6 k
python26-pycurl i386 7.15.5.1-9.el5 epel 72 k
python26-requests noarch 1.1.0-5.el5 epel 79 k
python26-six noarch 1.7.3-3.el5 epel 29 k
python26-tornado i386 4.2.1-1.el5 salt-2015.8 733 k
python26-urllib3 noarch 1.5-8.el5 epel 52 k
python26-zmq i386 14.5.0-2.el5 salt-2015.8 563 k
salt noarch 2015.8.8-2.el5 salt-2015.8 7.0 M
zeromq i386 4.0.5-4.el5 salt-2015.8 620 k
Transaction Summary
=======================================================================================================================
Install 24 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 22 M
Downloading Packages:
http://mirrors.opencas.cn/epel/5/i386/python26-backports-1.0-5.el5.i386.rpm: [Errno 4] IOError: <urlopen error (101, 'Network is unreachable')>
Trying other mirror.
(1/24): python26-backports-1.0-5.el5.i386.rpm | 3.7 kB 00:00
(2/24): python26-ordereddict-1.1-3.el5.noarch.rpm | 6.6 kB 00:00
(3/24): python26-backports-ssl_match_hostname-3.4.0.2-5.el5.noarch.rpm | 11 kB 00:00
(4/24): libffi-3.0.5-1.el5.i386.rpm | 21 kB 00:00
(5/24): python26-markupsafe-0.11-3.el5.i386.rpm | 24 kB 00:00
(6/24): python26-six-1.7.3-3.el5.noarch.rpm | 29 kB 00:00
(7/24): python26-urllib3-1.5-8.el5.noarch.rpm | 52 kB 00:00
(8/24): libyaml-0.1.2-8.el5.i386.rpm | 55 kB 00:00
(9/24): python26-pycurl-7.15.5.1-9.el5.i386.rpm | 72 kB 00:00
(10/24): python26-requests-1.1.0-5.el5.noarch.rpm | 79 kB 00:00
(11/24): python26-msgpack-0.4.5-1.el5.i386.rpm | 83 kB 00:01
(12/24): python26-PyYAML-3.08-4.el5.i386.rpm | 166 kB 00:00
(13/24): python26-distribute-0.6.10-4.el5.noarch.rpm | 511 kB 00:09
(14/24): python26-chardet-2.0.1-2.el5.noarch.rpm | 544 kB 00:00
(15/24): python26-zmq-14.5.0-2.el5.i386.rpm | 563 kB 00:11
(16/24): zeromq-4.0.5-4.el5.i386.rpm | 620 kB 00:08
(17/24): python26-crypto-2.6.1-2.el5.i386.rpm | 659 kB 00:11
(18/24): python26-libs-2.6.8-3.el5.i386.rpm | 671 kB 00:05
(19/24): python26-tornado-4.2.1-1.el5.i386.rpm | 733 kB 00:09
(20/24): python26-jinja2-2.5.5-6.el5.noarch.rpm | 793 kB 00:07
(21/24): salt-master-2015.8.8-2.el5.noarch.rpm | 1.2 MB 00:11
(22/24): python26-babel-0.9.5-2.el5.noarch.rpm | 1.8 MB 00:01
(23/24): python26-2.6.8-3.el5.i386.rpm | 6.5 MB 00:11
(24/24): salt-2015.8.8-2.el5.noarch.rpm | 7.0 MB 02:29
-----------------------------------------------------------------------------------------------------------------------
Total 78 kB/s | 22 MB 04:51
exiting because --downloadonly specified
[root@python tmp]# yum install -y --downloadonly --downloaddir=/root/salt-syndic salt-syndic
Loaded plugins: downloadonly, rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package salt-syndic.noarch 0:2015.8.8-2.el5 set to be updated
--> Processing Dependency: salt-master = 2015.8.8-2.el5 for package: salt-syndic
--> Processing Dependency: /usr/bin/python2.6 for package: salt-syndic
--> Running transaction check
---> Package python26.i386 0:2.6.8-3.el5 set to be updated
--> Processing Dependency: libffi for package: python26
--> Processing Dependency: libpython2.6.so.1.0 for package: python26
--> Processing Dependency: libffi.so.5 for package: python26
--> Processing Dependency: python26-libs for package: python26
---> Package salt-master.noarch 0:2015.8.8-2.el5 set to be updated
--> Processing Dependency: salt = 2015.8.8-2.el5 for package: salt-master
--> Running transaction check
---> Package libffi.i386 0:3.0.5-1.el5 set to be updated
---> Package python26-libs.i386 0:2.6.8-3.el5 set to be updated
---> Package salt.noarch 0:2015.8.8-2.el5 set to be updated
--> Processing Dependency: python26-msgpack > 0.3 for package: salt
--> Processing Dependency: python26-requests >= 1.0.0 for package: salt
--> Processing Dependency: python26-crypto >= 2.6.1 for package: salt
--> Processing Dependency: python26-tornado >= 4.2.1 for package: salt
--> Processing Dependency: python26-zmq for package: salt
--> Processing Dependency: python26-jinja2 for package: salt
--> Processing Dependency: python26-PyYAML for package: salt
--> Processing Dependency: python26-six for package: salt
--> Running transaction check
---> Package python26-PyYAML.i386 0:3.08-4.el5 set to be updated
--> Processing Dependency: libyaml-0.so.1 for package: python26-PyYAML
---> Package python26-crypto.i386 0:2.6.1-2.el5 set to be updated
---> Package python26-jinja2.noarch 0:2.5.5-6.el5 set to be updated
--> Processing Dependency: python26-babel >= 0.8 for package: python26-jinja2
--> Processing Dependency: python26-distribute for package: python26-jinja2
--> Processing Dependency: python26-markupsafe for package: python26-jinja2
---> Package python26-msgpack.i386 0:0.4.5-1.el5 set to be updated
---> Package python26-requests.noarch 0:1.1.0-5.el5 set to be updated
--> Processing Dependency: python26-urllib3 for package: python26-requests
--> Processing Dependency: python26-ordereddict for package: python26-requests
--> Processing Dependency: python26-chardet for package: python26-requests
---> Package python26-six.noarch 0:1.7.3-3.el5 set to be updated
---> Package python26-tornado.i386 0:4.2.1-1.el5 set to be updated
--> Processing Dependency: python26-backports-ssl_match_hostname for package: python26-tornado
--> Processing Dependency: python26-pycurl for package: python26-tornado
---> Package python26-zmq.i386 0:14.5.0-2.el5 set to be updated
--> Processing Dependency: libzmq.so.4 for package: python26-zmq
--> Running transaction check
---> Package libyaml.i386 0:0.1.2-8.el5 set to be updated
---> Package python26-babel.noarch 0:0.9.5-2.el5 set to be updated
---> Package python26-backports-ssl_match_hostname.noarch 0:3.4.0.2-5.el5 set to be updated
--> Processing Dependency: python26-backports for package: python26-backports-ssl_match_hostname
---> Package python26-chardet.noarch 0:2.0.1-2.el5 set to be updated
---> Package python26-distribute.noarch 0:0.6.10-4.el5 set to be updated
---> Package python26-markupsafe.i386 0:0.11-3.el5 set to be updated
---> Package python26-ordereddict.noarch 0:1.1-3.el5 set to be updated
---> Package python26-pycurl.i386 0:7.15.5.1-9.el5 set to be updated
---> Package python26-urllib3.noarch 0:1.5-8.el5 set to be updated
---> Package zeromq.i386 0:4.0.5-4.el5 set to be updated
--> Running transaction check
---> Package python26-backports.i386 0:1.0-5.el5 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
=======================================================================================================================
Package Arch Version Repository Size
=======================================================================================================================
Installing:
salt-syndic noarch 2015.8.8-2.el5 salt-2015.8 14 k
Installing for dependencies:
libffi i386 3.0.5-1.el5 epel 21 k
libyaml i386 0.1.2-8.el5 epel 55 k
python26 i386 2.6.8-3.el5 salt-2015.8 6.5 M
python26-PyYAML i386 3.08-4.el5 epel 166 k
python26-babel noarch 0.9.5-2.el5 epel 1.8 M
python26-backports i386 1.0-5.el5 epel 3.7 k
python26-backports-ssl_match_hostname noarch 3.4.0.2-5.el5 epel 11 k
python26-chardet noarch 2.0.1-2.el5 epel 544 k
python26-crypto i386 2.6.1-2.el5 salt-2015.8 659 k
python26-distribute noarch 0.6.10-4.el5 salt-2015.8 511 k
python26-jinja2 noarch 2.5.5-6.el5 salt-2015.8 793 k
python26-libs i386 2.6.8-3.el5 salt-2015.8 671 k
python26-markupsafe i386 0.11-3.el5 epel 24 k
python26-msgpack i386 0.4.5-1.el5 salt-2015.8 83 k
python26-ordereddict noarch 1.1-3.el5 epel 6.6 k
python26-pycurl i386 7.15.5.1-9.el5 epel 72 k
python26-requests noarch 1.1.0-5.el5 epel 79 k
python26-six noarch 1.7.3-3.el5 epel 29 k
python26-tornado i386 4.2.1-1.el5 salt-2015.8 733 k
python26-urllib3 noarch 1.5-8.el5 epel 52 k
python26-zmq i386 14.5.0-2.el5 salt-2015.8 563 k
salt noarch 2015.8.8-2.el5 salt-2015.8 7.0 M
salt-master noarch 2015.8.8-2.el5 salt-2015.8 1.2 M
zeromq i386 4.0.5-4.el5 salt-2015.8 620 k
Transaction Summary
=======================================================================================================================
Install 25 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 22 M
Downloading Packages:
http://mirrors.opencas.cn/epel/5/i386/python26-backports-1.0-5.el5.i386.rpm: [Errno 4] IOError: <urlopen error (101, 'Network is unreachable')>
Trying other mirror.
(1/25): python26-backports-1.0-5.el5.i386.rpm | 3.7 kB 00:00
(2/25): python26-ordereddict-1.1-3.el5.noarch.rpm | 6.6 kB 00:00
(3/25): python26-backports-ssl_match_hostname-3.4.0.2-5.el5.noarch.rpm | 11 kB 00:00
(4/25): salt-syndic-2015.8.8-2.el5.noarch.rpm | 14 kB 00:00
(5/25): libffi-3.0.5-1.el5.i386.rpm | 21 kB 00:00
(6/25): python26-markupsafe-0.11-3.el5.i386.rpm | 24 kB 00:00
(7/25): python26-six-1.7.3-3.el5.noarch.rpm | 29 kB 00:00
(8/25): python26-urllib3-1.5-8.el5.noarch.rpm | 52 kB 00:00
(9/25): libyaml-0.1.2-8.el5.i386.rpm | 55 kB 00:00
(10/25): python26-pycurl-7.15.5.1-9.el5.i386.rpm | 72 kB 00:00
(11/25): python26-requests-1.1.0-5.el5.noarch.rpm | 79 kB 00:00
(12/25): python26-msgpack-0.4.5-1.el5.i386.rpm | 83 kB 00:03
(13/25): python26-PyYAML-3.08-4.el5.i386.rpm | 166 kB 00:00
(14/25): python26-distribute-0.6.10-4.el5.noarch.rpm | 511 kB 00:11
(15/25): python26-chardet-2.0.1-2.el5.noarch.rpm | 544 kB 00:00
(16/25): python26-zmq-14.5.0-2.el5.i386.rpm | 563 kB 00:24
(17/25): zeromq-4.0.5-4.el5.i386.rpm | 620 kB 00:05
(18/25): python26-crypto-2.6.1-2.el5.i386.rpm | 659 kB 00:11
(19/25): python26-libs-2.6.8-3.el5.i386.rpm | 671 kB 00:11
(20/25): python26-tornado-4.2.1-1.el5.i386.rpm | 733 kB 00:25
(21/25): python26-jinja2-2.5.5-6.el5.noarch.rpm | 793 kB 00:07
(22/25): salt-master-2015.8.8-2.el5.noarch.rpm | 1.2 MB 00:30
(23/25): python26-babel-0.9.5-2.el5.noarch.rpm | 1.8 MB 00:02
(24/25): python26-2.6.8-3.el5.i386.rpm | 6.5 MB 01:25
(25/25): salt-2015.8.8-2.el5.noarch.rpm | 7.0 MB 00:12
-----------------------------------------------------------------------------------------------------------------------
Total 78 kB/s | 22 MB 04:51
exiting because --downloadonly specified
[root@python tmp]# yum install -y --downloadonly --downloaddir=/root/salt-cloud salt-cloud
Loaded plugins: downloadonly, rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package salt-cloud.noarch 0:2015.8.8-2.el5 set to be updated
--> Processing Dependency: salt-master = 2015.8.8-2.el5 for package: salt-cloud
--> Processing Dependency: python26-libcloud for package: salt-cloud
--> Processing Dependency: /usr/bin/python2.6 for package: salt-cloud
--> Running transaction check
---> Package python26.i386 0:2.6.8-3.el5 set to be updated
--> Processing Dependency: libffi for package: python26
--> Processing Dependency: libpython2.6.so.1.0 for package: python26
--> Processing Dependency: libffi.so.5 for package: python26
--> Processing Dependency: python26-libs for package: python26
---> Package python26-libcloud.noarch 0:0.20.0-1.el5 set to be updated
---> Package salt-master.noarch 0:2015.8.8-2.el5 set to be updated
--> Processing Dependency: salt = 2015.8.8-2.el5 for package: salt-master
--> Running transaction check
---> Package libffi.i386 0:3.0.5-1.el5 set to be updated
---> Package python26-libs.i386 0:2.6.8-3.el5 set to be updated
---> Package salt.noarch 0:2015.8.8-2.el5 set to be updated
--> Processing Dependency: python26-msgpack > 0.3 for package: salt
--> Processing Dependency: python26-requests >= 1.0.0 for package: salt
--> Processing Dependency: python26-crypto >= 2.6.1 for package: salt
--> Processing Dependency: python26-tornado >= 4.2.1 for package: salt
--> Processing Dependency: python26-zmq for package: salt
--> Processing Dependency: python26-jinja2 for package: salt
--> Processing Dependency: python26-PyYAML for package: salt
--> Processing Dependency: python26-six for package: salt
--> Running transaction check
---> Package python26-PyYAML.i386 0:3.08-4.el5 set to be updated
--> Processing Dependency: libyaml-0.so.1 for package: python26-PyYAML
---> Package python26-crypto.i386 0:2.6.1-2.el5 set to be updated
---> Package python26-jinja2.noarch 0:2.5.5-6.el5 set to be updated
--> Processing Dependency: python26-babel >= 0.8 for package: python26-jinja2
--> Processing Dependency: python26-distribute for package: python26-jinja2
--> Processing Dependency: python26-markupsafe for package: python26-jinja2
---> Package python26-msgpack.i386 0:0.4.5-1.el5 set to be updated
---> Package python26-requests.noarch 0:1.1.0-5.el5 set to be updated
--> Processing Dependency: python26-urllib3 for package: python26-requests
--> Processing Dependency: python26-ordereddict for package: python26-requests
--> Processing Dependency: python26-chardet for package: python26-requests
---> Package python26-six.noarch 0:1.7.3-3.el5 set to be updated
---> Package python26-tornado.i386 0:4.2.1-1.el5 set to be updated
--> Processing Dependency: python26-backports-ssl_match_hostname for package: python26-tornado
--> Processing Dependency: python26-pycurl for package: python26-tornado
---> Package python26-zmq.i386 0:14.5.0-2.el5 set to be updated
--> Processing Dependency: libzmq.so.4 for package: python26-zmq
--> Running transaction check
---> Package libyaml.i386 0:0.1.2-8.el5 set to be updated
---> Package python26-babel.noarch 0:0.9.5-2.el5 set to be updated
---> Package python26-backports-ssl_match_hostname.noarch 0:3.4.0.2-5.el5 set to be updated
--> Processing Dependency: python26-backports for package: python26-backports-ssl_match_hostname
---> Package python26-chardet.noarch 0:2.0.1-2.el5 set to be updated
---> Package python26-distribute.noarch 0:0.6.10-4.el5 set to be updated
---> Package python26-markupsafe.i386 0:0.11-3.el5 set to be updated
---> Package python26-ordereddict.noarch 0:1.1-3.el5 set to be updated
---> Package python26-pycurl.i386 0:7.15.5.1-9.el5 set to be updated
---> Package python26-urllib3.noarch 0:1.5-8.el5 set to be updated
---> Package zeromq.i386 0:4.0.5-4.el5 set to be updated
--> Running transaction check
---> Package python26-backports.i386 0:1.0-5.el5 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
=======================================================================================================================
Package Arch Version Repository Size
=======================================================================================================================
Installing:
salt-cloud noarch 2015.8.8-2.el5 salt-2015.8 17 k
Installing for dependencies:
libffi i386 3.0.5-1.el5 epel 21 k
libyaml i386 0.1.2-8.el5 epel 55 k
python26 i386 2.6.8-3.el5 salt-2015.8 6.5 M
python26-PyYAML i386 3.08-4.el5 epel 166 k
python26-babel noarch 0.9.5-2.el5 epel 1.8 M
python26-backports i386 1.0-5.el5 epel 3.7 k
python26-backports-ssl_match_hostname noarch 3.4.0.2-5.el5 epel 11 k
python26-chardet noarch 2.0.1-2.el5 epel 544 k
python26-crypto i386 2.6.1-2.el5 salt-2015.8 659 k
python26-distribute noarch 0.6.10-4.el5 salt-2015.8 511 k
python26-jinja2 noarch 2.5.5-6.el5 salt-2015.8 793 k
python26-libcloud noarch 0.20.0-1.el5 salt-2015.8 2.8 M
python26-libs i386 2.6.8-3.el5 salt-2015.8 671 k
python26-markupsafe i386 0.11-3.el5 epel 24 k
python26-msgpack i386 0.4.5-1.el5 salt-2015.8 83 k
python26-ordereddict noarch 1.1-3.el5 epel 6.6 k
python26-pycurl i386 7.15.5.1-9.el5 epel 72 k
python26-requests noarch 1.1.0-5.el5 epel 79 k
python26-six noarch 1.7.3-3.el5 epel 29 k
python26-tornado i386 4.2.1-1.el5 salt-2015.8 733 k
python26-urllib3 noarch 1.5-8.el5 epel 52 k
python26-zmq i386 14.5.0-2.el5 salt-2015.8 563 k
salt noarch 2015.8.8-2.el5 salt-2015.8 7.0 M
salt-master noarch 2015.8.8-2.el5 salt-2015.8 1.2 M
zeromq i386 4.0.5-4.el5 salt-2015.8 620 k
Transaction Summary
=======================================================================================================================
Install 26 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 25 M
Downloading Packages:
http://mirrors.opencas.cn/epel/5/i386/python26-backports-1.0-5.el5.i386.rpm: [Errno 4] IOError: <urlopen error (101, 'Network is unreachable')>
Trying other mirror.
(1/26): python26-backports-1.0-5.el5.i386.rpm | 3.7 kB 00:00
(2/26): python26-ordereddict-1.1-3.el5.noarch.rpm | 6.6 kB 00:00
(3/26): python26-backports-ssl_match_hostname-3.4.0.2-5.el5.noarch.rpm | 11 kB 00:00
(4/26): salt-cloud-2015.8.8-2.el5.noarch.rpm | 17 kB 00:00
(5/26): libffi-3.0.5-1.el5.i386.rpm | 21 kB 00:00
(6/26): python26-markupsafe-0.11-3.el5.i386.rpm | 24 kB 00:00
(7/26): python26-six-1.7.3-3.el5.noarch.rpm | 29 kB 00:00
(8/26): python26-urllib3-1.5-8.el5.noarch.rpm | 52 kB 00:00
(9/26): libyaml-0.1.2-8.el5.i386.rpm | 55 kB 00:00
(10/26): python26-pycurl-7.15.5.1-9.el5.i386.rpm | 72 kB 00:00
(11/26): python26-requests-1.1.0-5.el5.noarch.rpm | 79 kB 00:00
(12/26): python26-msgpack-0.4.5-1.el5.i386.rpm | 83 kB 00:01
(13/26): python26-PyYAML-3.08-4.el5.i386.rpm | 166 kB 00:00
(14/26): python26-distribute-0.6.10-4.el5.noarch.rpm | 511 kB 00:05
(15/26): python26-chardet-2.0.1-2.el5.noarch.rpm | 544 kB 00:00
(16/26): python26-zmq-14.5.0-2.el5.i386.rpm | 563 kB 00:04
(17/26): zeromq-4.0.5-4.el5.i386.rpm | 620 kB 00:03
(18/26): python26-crypto-2.6.1-2.el5.i386.rpm | 659 kB 00:01
(19/26): python26-libs-2.6.8-3.el5.i386.rpm | 671 kB 00:12
(20/26): python26-tornado-4.2.1-1.el5.i386.rpm | 733 kB 00:09
(21/26): python26-jinja2-2.5.5-6.el5.noarch.rpm | 793 kB 00:03
(22/26): salt-master-2015.8.8-2.el5.noarch.rpm | 1.2 MB 00:14
(23/26): python26-babel-0.9.5-2.el5.noarch.rpm | 1.8 MB 00:01
(24/26): python26-libcloud-0.20.0-1.el5.noarch.rpm | 2.8 MB 00:26
(25/26): python26-2.6.8-3.el5.i386.rpm | 6.5 MB 01:55
(26/26): salt-2015.8.8-2.el5.noarch.rpm | 7.0 MB 01:07
-----------------------------------------------------------------------------------------------------------------------
Total 79 kB/s | 25 MB 05:22
exiting because --downloadonly specified
[root@python tmp]# yum install -y --downloadonly --downloaddir=/root/salt-api salt-api
Loaded plugins: downloadonly, rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package salt-api.noarch 0:2015.8.8-2.el5 set to be updated
--> Processing Dependency: salt-master = 2015.8.8-2.el5 for package: salt-api
--> Processing Dependency: /usr/bin/python2.6 for package: salt-api
--> Processing Dependency: python26-cherrypy for package: salt-api
--> Running transaction check
---> Package python26.i386 0:2.6.8-3.el5 set to be updated
--> Processing Dependency: libffi for package: python26
--> Processing Dependency: libpython2.6.so.1.0 for package: python26
--> Processing Dependency: libffi.so.5 for package: python26
--> Processing Dependency: python26-libs for package: python26
---> Package python26-cherrypy.noarch 0:3.5.0-2.el5 set to be updated
---> Package salt-master.noarch 0:2015.8.8-2.el5 set to be updated
--> Processing Dependency: salt = 2015.8.8-2.el5 for package: salt-master
--> Running transaction check
---> Package libffi.i386 0:3.0.5-1.el5 set to be updated
---> Package python26-libs.i386 0:2.6.8-3.el5 set to be updated
---> Package salt.noarch 0:2015.8.8-2.el5 set to be updated
--> Processing Dependency: python26-msgpack > 0.3 for package: salt
--> Processing Dependency: python26-requests >= 1.0.0 for package: salt
--> Processing Dependency: python26-crypto >= 2.6.1 for package: salt
--> Processing Dependency: python26-tornado >= 4.2.1 for package: salt
--> Processing Dependency: python26-zmq for package: salt
--> Processing Dependency: python26-jinja2 for package: salt
--> Processing Dependency: python26-PyYAML for package: salt
--> Processing Dependency: python26-six for package: salt
--> Running transaction check
---> Package python26-PyYAML.i386 0:3.08-4.el5 set to be updated
--> Processing Dependency: libyaml-0.so.1 for package: python26-PyYAML
---> Package python26-crypto.i386 0:2.6.1-2.el5 set to be updated
---> Package python26-jinja2.noarch 0:2.5.5-6.el5 set to be updated
--> Processing Dependency: python26-babel >= 0.8 for package: python26-jinja2
--> Processing Dependency: python26-distribute for package: python26-jinja2
--> Processing Dependency: python26-markupsafe for package: python26-jinja2
---> Package python26-msgpack.i386 0:0.4.5-1.el5 set to be updated
---> Package python26-requests.noarch 0:1.1.0-5.el5 set to be updated
--> Processing Dependency: python26-urllib3 for package: python26-requests
--> Processing Dependency: python26-ordereddict for package: python26-requests
--> Processing Dependency: python26-chardet for package: python26-requests
---> Package python26-six.noarch 0:1.7.3-3.el5 set to be updated
---> Package python26-tornado.i386 0:4.2.1-1.el5 set to be updated
--> Processing Dependency: python26-backports-ssl_match_hostname for package: python26-tornado
--> Processing Dependency: python26-pycurl for package: python26-tornado
---> Package python26-zmq.i386 0:14.5.0-2.el5 set to be updated
--> Processing Dependency: libzmq.so.4 for package: python26-zmq
--> Running transaction check
---> Package libyaml.i386 0:0.1.2-8.el5 set to be updated
---> Package python26-babel.noarch 0:0.9.5-2.el5 set to be updated
---> Package python26-backports-ssl_match_hostname.noarch 0:3.4.0.2-5.el5 set to be updated
--> Processing Dependency: python26-backports for package: python26-backports-ssl_match_hostname
---> Package python26-chardet.noarch 0:2.0.1-2.el5 set to be updated
---> Package python26-distribute.noarch 0:0.6.10-4.el5 set to be updated
---> Package python26-markupsafe.i386 0:0.11-3.el5 set to be updated
---> Package python26-ordereddict.noarch 0:1.1-3.el5 set to be updated
---> Package python26-pycurl.i386 0:7.15.5.1-9.el5 set to be updated
---> Package python26-urllib3.noarch 0:1.5-8.el5 set to be updated
---> Package zeromq.i386 0:4.0.5-4.el5 set to be updated
--> Running transaction check
---> Package python26-backports.i386 0:1.0-5.el5 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
=======================================================================================================================
Package Arch Version Repository Size
=======================================================================================================================
Installing:
salt-api noarch 2015.8.8-2.el5 salt-2015.8 14 k
Installing for dependencies:
libffi i386 3.0.5-1.el5 epel 21 k
libyaml i386 0.1.2-8.el5 epel 55 k
python26 i386 2.6.8-3.el5 salt-2015.8 6.5 M
python26-PyYAML i386 3.08-4.el5 epel 166 k
python26-babel noarch 0.9.5-2.el5 epel 1.8 M
python26-backports i386 1.0-5.el5 epel 3.7 k
python26-backports-ssl_match_hostname noarch 3.4.0.2-5.el5 epel 11 k
python26-chardet noarch 2.0.1-2.el5 epel 544 k
python26-cherrypy noarch 3.5.0-2.el5 salt-2015.8 559 k
python26-crypto i386 2.6.1-2.el5 salt-2015.8 659 k
python26-distribute noarch 0.6.10-4.el5 salt-2015.8 511 k
python26-jinja2 noarch 2.5.5-6.el5 salt-2015.8 793 k
python26-libs i386 2.6.8-3.el5 salt-2015.8 671 k
python26-markupsafe i386 0.11-3.el5 epel 24 k
python26-msgpack i386 0.4.5-1.el5 salt-2015.8 83 k
python26-ordereddict noarch 1.1-3.el5 epel 6.6 k
python26-pycurl i386 7.15.5.1-9.el5 epel 72 k
python26-requests noarch 1.1.0-5.el5 epel 79 k
python26-six noarch 1.7.3-3.el5 epel 29 k
python26-tornado i386 4.2.1-1.el5 salt-2015.8 733 k
python26-urllib3 noarch 1.5-8.el5 epel 52 k
python26-zmq i386 14.5.0-2.el5 salt-2015.8 563 k
salt noarch 2015.8.8-2.el5 salt-2015.8 7.0 M
salt-master noarch 2015.8.8-2.el5 salt-2015.8 1.2 M
zeromq i386 4.0.5-4.el5 salt-2015.8 620 k
Transaction Summary
=======================================================================================================================
Install 26 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 23 M
Downloading Packages:
http://mirrors.opencas.cn/epel/5/i386/python26-backports-1.0-5.el5.i386.rpm: [Errno 4] IOError: <urlopen error (101, 'Network is unreachable')>
Trying other mirror.
(1/26): python26-backports-1.0-5.el5.i386.rpm | 3.7 kB 00:00
(2/26): python26-ordereddict-1.1-3.el5.noarch.rpm | 6.6 kB 00:00
(3/26): python26-backports-ssl_match_hostname-3.4.0.2-5.el5.noarch.rpm | 11 kB 00:00
(4/26): salt-api-2015.8.8-2.el5.noarch.rpm | 14 kB 00:00
(5/26): libffi-3.0.5-1.el5.i386.rpm | 21 kB 00:00
(6/26): python26-markupsafe-0.11-3.el5.i386.rpm | 24 kB 00:00
(7/26): python26-six-1.7.3-3.el5.noarch.rpm | 29 kB 00:00
(8/26): python26-urllib3-1.5-8.el5.noarch.rpm | 52 kB 00:00
(9/26): libyaml-0.1.2-8.el5.i386.rpm | 55 kB 00:00
(10/26): python26-pycurl-7.15.5.1-9.el5.i386.rpm | 72 kB 00:00
(11/26): python26-requests-1.1.0-5.el5.noarch.rpm | 79 kB 00:00
(12/26): python26-msgpack-0.4.5-1.el5.i386.rpm | 83 kB 00:00
(13/26): python26-PyYAML-3.08-4.el5.i386.rpm | 166 kB 00:00
(14/26): python26-distribute-0.6.10-4.el5.noarch.rpm | 511 kB 00:02
(15/26): python26-chardet-2.0.1-2.el5.noarch.rpm | 544 kB 00:00
(16/26): python26-cherrypy-3.5.0-2.el5.noarch.rpm | 559 kB 00:03
(17/26): python26-zmq-14.5.0-2.el5.i386.rpm | 563 kB 00:19
(18/26): zeromq-4.0.5-4.el5.i386.rpm | 620 kB 00:09
(19/26): python26-crypto-2.6.1-2.el5.i386.rpm | 659 kB 00:05
(20/26): python26-libs-2.6.8-3.el5.i386.rpm | 671 kB 00:28
(21/26): python26-tornado-4.2.1-1.el5.i386.rpm | 733 kB 00:04
(22/26): python26-jinja2-2.5.5-6.el5.noarch.rpm | 793 kB 00:05
(23/26): salt-master-2015.8.8-2.el5.noarch.rpm | 1.2 MB 00:05
(24/26): python26-babel-0.9.5-2.el5.noarch.rpm | 1.8 MB 00:01
(25/26): python26-2.6.8-3.el5.i386.rpm | 6.5 MB 02:52
(26/26): salt-2015.8.8-2.el5.noarch.rpm | 7.0 MB 00:54
-----------------------------------------------------------------------------------------------------------------------
Total 63 kB/s | 23 MB 06:08
exiting because --downloadonly specified
[root@python tmp]# yum install -y --downloadonly --downloaddir=/root/ssh salt-ssh
Loaded plugins: downloadonly, rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package salt-ssh.noarch 0:2015.8.8-2.el5 set to be updated
--> Processing Dependency: salt = 2015.8.8-2.el5 for package: salt-ssh
--> Processing Dependency: /usr/bin/python2.6 for package: salt-ssh
--> Running transaction check
---> Package python26.i386 0:2.6.8-3.el5 set to be updated
--> Processing Dependency: libffi for package: python26
--> Processing Dependency: libpython2.6.so.1.0 for package: python26
--> Processing Dependency: libffi.so.5 for package: python26
--> Processing Dependency: python26-libs for package: python26
---> Package salt.noarch 0:2015.8.8-2.el5 set to be updated
--> Processing Dependency: python26-msgpack > 0.3 for package: salt
--> Processing Dependency: python26-requests >= 1.0.0 for package: salt
--> Processing Dependency: python26-crypto >= 2.6.1 for package: salt
--> Processing Dependency: python26-tornado >= 4.2.1 for package: salt
--> Processing Dependency: python26-zmq for package: salt
--> Processing Dependency: python26-jinja2 for package: salt
--> Processing Dependency: python26-PyYAML for package: salt
--> Processing Dependency: python26-six for package: salt
--> Running transaction check
---> Package libffi.i386 0:3.0.5-1.el5 set to be updated
---> Package python26-PyYAML.i386 0:3.08-4.el5 set to be updated
--> Processing Dependency: libyaml-0.so.1 for package: python26-PyYAML
---> Package python26-crypto.i386 0:2.6.1-2.el5 set to be updated
---> Package python26-jinja2.noarch 0:2.5.5-6.el5 set to be updated
--> Processing Dependency: python26-babel >= 0.8 for package: python26-jinja2
--> Processing Dependency: python26-distribute for package: python26-jinja2
--> Processing Dependency: python26-markupsafe for package: python26-jinja2
---> Package python26-libs.i386 0:2.6.8-3.el5 set to be updated
---> Package python26-msgpack.i386 0:0.4.5-1.el5 set to be updated
---> Package python26-requests.noarch 0:1.1.0-5.el5 set to be updated
--> Processing Dependency: python26-urllib3 for package: python26-requests
--> Processing Dependency: python26-ordereddict for package: python26-requests
--> Processing Dependency: python26-chardet for package: python26-requests
---> Package python26-six.noarch 0:1.7.3-3.el5 set to be updated
---> Package python26-tornado.i386 0:4.2.1-1.el5 set to be updated
--> Processing Dependency: python26-backports-ssl_match_hostname for package: python26-tornado
--> Processing Dependency: python26-pycurl for package: python26-tornado
---> Package python26-zmq.i386 0:14.5.0-2.el5 set to be updated
--> Processing Dependency: libzmq.so.4 for package: python26-zmq
--> Running transaction check
---> Package libyaml.i386 0:0.1.2-8.el5 set to be updated
---> Package python26-babel.noarch 0:0.9.5-2.el5 set to be updated
---> Package python26-backports-ssl_match_hostname.noarch 0:3.4.0.2-5.el5 set to be updated
--> Processing Dependency: python26-backports for package: python26-backports-ssl_match_hostname
---> Package python26-chardet.noarch 0:2.0.1-2.el5 set to be updated
---> Package python26-distribute.noarch 0:0.6.10-4.el5 set to be updated
---> Package python26-markupsafe.i386 0:0.11-3.el5 set to be updated
---> Package python26-ordereddict.noarch 0:1.1-3.el5 set to be updated
---> Package python26-pycurl.i386 0:7.15.5.1-9.el5 set to be updated
---> Package python26-urllib3.noarch 0:1.5-8.el5 set to be updated
---> Package zeromq.i386 0:4.0.5-4.el5 set to be updated
--> Running transaction check
---> Package python26-backports.i386 0:1.0-5.el5 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
=======================================================================================================================
Package Arch Version Repository Size
=======================================================================================================================
Installing:
salt-ssh noarch 2015.8.8-2.el5 salt-2015.8 15 k
Installing for dependencies:
libffi i386 3.0.5-1.el5 epel 21 k
libyaml i386 0.1.2-8.el5 epel 55 k
python26 i386 2.6.8-3.el5 salt-2015.8 6.5 M
python26-PyYAML i386 3.08-4.el5 epel 166 k
python26-babel noarch 0.9.5-2.el5 epel 1.8 M
python26-backports i386 1.0-5.el5 epel 3.7 k
python26-backports-ssl_match_hostname noarch 3.4.0.2-5.el5 epel 11 k
python26-chardet noarch 2.0.1-2.el5 epel 544 k
python26-crypto i386 2.6.1-2.el5 salt-2015.8 659 k
python26-distribute noarch 0.6.10-4.el5 salt-2015.8 511 k
python26-jinja2 noarch 2.5.5-6.el5 salt-2015.8 793 k
python26-libs i386 2.6.8-3.el5 salt-2015.8 671 k
python26-markupsafe i386 0.11-3.el5 epel 24 k
python26-msgpack i386 0.4.5-1.el5 salt-2015.8 83 k
python26-ordereddict noarch 1.1-3.el5 epel 6.6 k
python26-pycurl i386 7.15.5.1-9.el5 epel 72 k
python26-requests noarch 1.1.0-5.el5 epel 79 k
python26-six noarch 1.7.3-3.el5 epel 29 k
python26-tornado i386 4.2.1-1.el5 salt-2015.8 733 k
python26-urllib3 noarch 1.5-8.el5 epel 52 k
python26-zmq i386 14.5.0-2.el5 salt-2015.8 563 k
salt noarch 2015.8.8-2.el5 salt-2015.8 7.0 M
zeromq i386 4.0.5-4.el5 salt-2015.8 620 k
Transaction Summary
=======================================================================================================================
Install 24 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 21 M
Downloading Packages:
http://mirrors.opencas.cn/epel/5/i386/python26-backports-1.0-5.el5.i386.rpm: [Errno 4] IOError: <urlopen error (101, 'Network is unreachable')>
Trying other mirror.
(1/24): python26-backports-1.0-5.el5.i386.rpm | 3.7 kB 00:00
(2/24): python26-ordereddict-1.1-3.el5.noarch.rpm | 6.6 kB 00:00
(3/24): python26-backports-ssl_match_hostname-3.4.0.2-5.el5.noarch.rpm | 11 kB 00:00
(4/24): salt-ssh-2015.8.8-2.el5.noarch.rpm | 15 kB 00:00
(5/24): libffi-3.0.5-1.el5.i386.rpm | 21 kB 00:00
(6/24): python26-markupsafe-0.11-3.el5.i386.rpm | 24 kB 00:00
(7/24): python26-six-1.7.3-3.el5.noarch.rpm | 29 kB 00:00
(8/24): python26-urllib3-1.5-8.el5.noarch.rpm | 52 kB 00:00
(9/24): libyaml-0.1.2-8.el5.i386.rpm | 55 kB 00:00
(10/24): python26-pycurl-7.15.5.1-9.el5.i386.rpm | 72 kB 00:00
(11/24): python26-requests-1.1.0-5.el5.noarch.rpm | 79 kB 00:00
(12/24): python26-msgpack-0.4.5-1.el5.i386.rpm | 83 kB 00:00
(13/24): python26-PyYAML-3.08-4.el5.i386.rpm | 166 kB 00:00
(14/24): python26-distribute-0.6.10-4.el5.noarch.rpm | 511 kB 00:12
(15/24): python26-chardet-2.0.1-2.el5.noarch.rpm | 544 kB 00:00
(16/24): python26-zmq-14.5.0-2.el5.i386.rpm | 563 kB 00:03
(17/24): zeromq-4.0.5-4.el5.i386.rpm | 620 kB 00:09
(18/24): python26-crypto-2.6.1-2.el5.i386.rpm | 659 kB 00:29
(19/24): python26-libs-2.6.8-3.el5.i386.rpm | 671 kB 00:04
(20/24): python26-tornado-4.2.1-1.el5.i386.rpm | 733 kB 00:12
(21/24): python26-jinja2-2.5.5-6.el5.noarch.rpm | 793 kB 00:10
(22/24): python26-babel-0.9.5-2.el5.noarch.rpm | 1.8 MB 00:01
(23/24): python26-2.6.8-3.el5.i386.rpm | 6.5 MB 00:20
(24/24): salt-2015.8.8-2.el5.noarch.rpm | 7.0 MB 01:41
-----------------------------------------------------------------------------------------------------------------------
Total 82 kB/s | 21 MB 04:21
exiting because --downloadonly specified